Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Mahendran, Moorthy and Lee, Giok Chui and Sharma, K. V. and Shahrani, Anuar (2012) Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 3 . pp. 301-310. ISSN 2231-8380 (online)

[img]
Preview
PDF
416Kb

Official URL: http://jmes.ump.edu.my/images/Volume%203/6%20Mahen...

Abstract

Experiments are undertaken to determine the efficiency of evacuated tube solar collector using water-based Titanium Oxide (TiO2) nanofluid at Pekan campus (3˚32’ N, 103˚25’ E) Faculty of Mechanical Engineering, University Malaysia Pahang for conversion of solar thermal energy. Malaysia lies in the equatorial zone with an average daily solar insolation of more than 900 W/m² and can reach a maximum of 1200 W/m² for most of the year. Traditionally, water is pumped through the collector at an optimum flow rate, for extraction of solar thermal energy. If the outlet temperature of water is high, further circulation of water through the collector is useless. This is due to low thermal conductivity of water of 0.6 W/m.K compared to metals which is many orders higher. Hence, it is necessary to reduce the surface temperature either by pumping water at higher flow rate or by enhancing the fluid properties by dispersing with nanoparticles. Pumping water at higher flow rates is not advantageous as the overall efficiency of the system is lowered. Liquids in which nanosize particles of metal or their oxides are dispersed in a base liquid such as water are known as 'Nanofluid'. It results in higher values of thermal conductivity compared to the base liquid. The thermal conductivity increases with concentration and temperature of the nanofluid. The increase in thermal conductivity with temperature is advantageous for applications in collectors, as the solar insolation varies throughout the day, with a minimum in the morning reaching a maximum at 2.00p.m and reducing thereafter. The efficiency of the collector estimated using TiO2 nanofluid of 0.3% concentration is about 0.73, compared to water which is about 0.58. The efficiency is enhanced by 16.7% maximum with 30-50nm size TiO2 nanoparticles dispersed in water, compared to the system working with water. The flow rate is fixed at 2.7 litres per minute for both liquids.

Item Type:Article
Additional Information:Presented at International Conference of Nanotechnology 2012 (ICONT 2012), 30 May-1 June 2012
Uncontrolled Keywords:Solar Energy; Nanofluid; Evacuated Tube Solar Collector
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:2722
Deposited By: Siti Aishah Ghani
Deposited On:31 Jul 2012 11:00
Last Modified:14 Aug 2017 12:26

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my