A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454

[img] PDF (FKM-2013-Tahseen-numerical study laminar)
Restricted to Repository staff only

520Kb

Official URL: http://dx.doi.org/10.3923/ajsr.2013.217.226

Abstract

In the present paper, the numerical analysis is two-dimensional steady state Navier-Stokes equations and the energy equation governing laminar incompressible flow are solved using the finite difference method (FDM) and the technique body fitted coordinates (BFC). The constant heat flux is imposed on the surface of the tubes as the thermal boundary condition. The arrangement is considered in-line tube-banks the transverse ratio (ST/D) and longitudinal pitch-to-diameter ratio (SL/D) of 1.25, 1.75 and 2.25 respectively are also considered. Reynolds numbers of 30, 125 and 200, and Prandtl number are taken as 0.71. The temperature contours, local Nusselt number distributions to the tube surface and mean Nusselt number were analyzed in this paper. It was found of that the strength of the heat transfer between the surface of tubes and the air flow increases with increasing Reynolds number and increasing pitch-to-diameter rate.

Item Type:Article
Additional Information:Tahseen Ahmed. Tahseen postgrade PMM11003 Prof. Dr. Md Mustafizur Rahman (M. M. Rahman) Dr. Mahadzir Ishak@Muhammad (M. Ishak)
Uncontrolled Keywords:Cross-flow; Finite difference; Forced convection; Circular in-line tube; Body fitted coordinates
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:3698
Deposited By:INVALID USER
Deposited On:13 May 2013 15:29
Last Modified:09 Aug 2017 16:17

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my