Improving the gas oil flow in pipelines by designing new floating technique

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Manoharan, M Nerranjini (2012) Improving the gas oil flow in pipelines by designing new floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

[img]
Preview
PDF
699Kb

Official URL: http://iportal.ump.edu.my/lib/item?id=chamo:66971&...

Abstract

Pipeline transportation is always preferred method to transport crude oil and natural gas due to safety purpose and cost effectiveness.Turbulent flow in pipeline causes friction drag and pressure drag which results in reduction in flow rate and pumping power losses.High operational cost is required in order to overcome these problems.As a result,most of the researchers discovered drag reducing agents like additives,polymers,surfactants and suspended solids to solve the problems.In the present work,floating technique will be introduced to improve the gas oil flow. Butyl rubber(IIR)has been selected as the material for floating device based on their flexibilities and strengths. Three sets of butyl rubber (IIR) with 17 stripes have been fabricated according width and thickness of 0.3cm and 0.1cm respectively with different lengths of 10cm,15cm and 20cm. The stripes suspended in pipeline by using aluminium made ring.10 different flow rates of gas oil used to a 1.5 inch sized pipe with testing section lengths of 0.5m, 1.0m, 1.5m and 2.0m. As the floating device suspended in pipeline, it helps to discard the formation of eddies. Among the three lengths of stripes,15cm achieved the highest drag reduction for most of the Reynolds numbers compared to 10cm and 20cm. The optimum drag reduction that can be achieved by using 15cm stripes at Reynolds number of 18173 is 27.93% at testing section length of 2.0m.

Item Type:Undergraduates Project Papers
Uncontrolled Keywords:Fluid dynamics Gases
Subjects:T Technology > TP Chemical technology
Divisions:Faculty of Chemical & Natural Resources Engineering
ID Code:4387
Deposited By: Shamsor Masra Othman
Deposited On:12 Nov 2013 11:11
Last Modified:03 Mar 2015 17:18

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my