Items where Subject is "T Technology > TP Chemical technology"

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 2214.

Muhammad Kharin Annuar, Sairan (2013) The effect of low sulphur wax residique (LSWR) and sorbitan monooleate (SPAN-80) to the emulsion fuel stability. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

A

A .A., Azharin Shah and N. H., Abdurahman and M. Y., Rosli (2014) Methodology to Produce Hard Coherent Water Adsorbent Using Modified Fusion Method. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 235-240. ISSN 1991-8178

A'in Syahira, Ratimin (2014) Study on citric acid as alternative admixtures for ordinary portland cement based binder. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

A., Idris and Chua, Gek Kee and Mohamad Rizza, Othman (2016) Incorporating Potential Environmental Impact from Water for Injection in Environmental Assessment of Monoclonal Antibody Production. Chemical Engineering Research and Design . ISSN 0263-8762 (In Press)

A. K. M., Moshiul Alam (2016) Fabrication and characterization of modified multi walled carbon nanotube reinforced unsaturated polyester nanocomposites. PhD thesis, Universiti Malaysia Pahang.

A. K. M., Moshiul Alam and M. D. H., Beg and M. Y., Rosli (2015) Influence of Carbon Nano Tubes on the Thermo-Mechanical Properties of Unsaturated Polyester Nanocomposite. IOP Conference Series: Materials Science and Engineering, 78 . pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online)

A. K. M., Moshiul Alam and M. D. H., Beg and Prasad, D. M. Reddy and Maksudur, R. Khan and M. F., Fina (2012) Structures and Performances of Simultaneous Ultrasound and Alkali Treated Oil Palm Empty Fruit Bunch Fiber Reinforced Poly(lactic acid) Composites. Composites Part A: Applied Science and Manufacturing, 43 (11). pp. 1921-1929. ISSN 1359-835X

A. M. M., Sakinah and Ismail, A. F. and Rosli, Md. Illias and A. W., Zularisam and Osman, Hassan and Matsuura, T. (2014) Effect of Substrate and Enzyme Concentration on Cyclodextrin Production in a Hollow Fibre Membrane Reactor System. Separation and Purification Technology, 124 . pp. 61-67. ISSN 1383-5866

A. M. M., Sakinah and Noor Suhana, Adzahar (2011) Application of Fractional Factorial Design (FFD) for Screening of Significant Factor in Influencing Succinic acid Production from Biodiesel Based Glycerol Using Escherichia Coli. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO) 2011, 19-21 April 2011 , Kuala Lumpur. pp. 1-5..

A. M. M., Sakinah and Siti Sabrina, M. S. (2016) Combination of Immobilization Techniques of Xylanase by Entrapment and Covalent Binding on Alginate Hydrogel Beads. In: International Conference in Organic Synthesis 2016 (ICOS2016), 21-24 August 2016 , Kuching, Sarawak. pp. 1-10.. (Unpublished)

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5..

A. W., Zularisam and A. M. M., Sakinah and Siddique, Md. Nurul Islam (2013) Behaviour of Natural Organic Matter (NOM), Colloidal Particle and Solution Chemistry on Ultra-filtration Performance. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

A.O.A, Farimin and Nordin, Endut (2009) Physical Properties Of Powdered Roselle-Pineapple Juice - Effects Of Maltodextrin. In: The Proceeding of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 90-97.. (Unpublished)

Ab Aziz, Nadira (2010) Effect of pH and ionic strength on membrane flux in the separation of escherichia coli by using cross-flow microfiltration. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ab. Halim, Nurul Iffah (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using pineapple pith for biocomposite application. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Abd Rahman, Diyanti (2010) Biodiesel production via homogeneous lewis acid catalyzed transesterification. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Abd Rasha, Mohammed and Abdurahman, H. Nour and Ahmad Ziad, Sulaiman (2014) Experimental Investigation on Dynamic Viscosity and Rheology of Water-Crude Oil Two Phases FlowBehavior at Different Water Volume Fractions. American Journal of Engineering Research (AJER), 3 (3). pp. 113-120. ISSN 2320-0936(Print); 2320-0847(Online)

Abd. Aziz, Mohd Azoddein and Mani Malam, Ahmad and M. Y., Rosli and Nik Meriam, Nik Sulaiman (2016) A Bioremediation Approach to Mercury Removal in a Shake Flask Culture Using Pseudomonas putida (ATCC 49128). Journal of Analytical & Bioanalytical Techniques, 7 (3). pp. 1-6. ISSN 2155-9872

Abd. Aziz, Mohd Azoddein and R. A., Bakar and Nik Meriam, Nik Sulaiman and Ahmad Bazli, Bustary and Nur Athirah, Mohamad Basir (2015) Mercury Removal from Actual Petroleum Based Industries Wastewater by P. putida in Membrane Bioreactor. In: New Directions in Multidisciplinary Research & Practice (NDMRP 2015), 12-13 May 2015 , Istanbul, Turkey. pp. 313-330..

Abdalla, A. M. Ali and Zulkefli, Yaacob and Abdurahman, H. Nour (2014) Enhanced Oil Recovery Techniques Miscible and Immiscible Flooding. Journal of Applied Sciences , 14 (10). pp. 1016-1022. ISSN 1812-5654

Abdalla A. M., Ben Ali (2016) Investigation on asphaltene precipitation during carbon dioxide flooding for oil recovery. Masters thesis, Universiti Malaysia Pahang.

Abdul Adam, Abdullah (2010) A Study On Spray Characteristics Of Straight Vegetable Oil. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Abdul Adam, Abdullah and R., Mamat and Kidoguchi, Yoshiyuki and Yatsufusa, Tomoaki (2011) Analysis of Straight Vegetable Oil (SVO) Spray Characteristic and Droplets Distribution By Using Nano-Spark Shadowgraph Photography Technique. In: The 3rd International Renewable Energy Congress, 19-22 December 2011 , Japan. . (Unpublished)

Abdul Aziz, Mohd Azzodein and Ahmad Bazli, Bustary and Mohd Hafizul, Muhammad and Henry Yong, Kim Fuong (2014) Treatment of Petroleum Based Industry Wastewater Using Electrocoagulant Enhance by Conventional Coagulant. In: International Conference on Innovation Trends in Multidisciplinary Academic Research (ITMAR), 20-21 October 2014 , Kuala Lumpur. . (Unpublished)

Abdul Azwan, Abdol Zahar (2009) Effects of injection molding gate mechanism on parameters machining and defects of book tray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hakim, Rahmad (2006) Study on the effect of substrates concentration in the production of xylanase from aspergillus niger using palm kernel cake. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Hisham, Ruslan (2009) Effect of cobalt laurate on the photo-degradation of high density polyethylene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Karim, Shaikh Abdul Nasir (2013) Development of Polyvinylidene Fluoride - Polydimethylsiloxane (Pvdf-Pdms) Thin Film Composite (Tfc) Membrane For Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Khairul, Abd Hamid (2014) A cfd simulation study on the effect of oil leaking rate from damaged submarine pipeline. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Rafiq, Mohamad Yazid (2009) Esterification of oleic acid with etanol by using sulfated zirconia catalyst in the presence of triglycerides : kinetic and modeling study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Mohd Yusoff (2009) Antibiotic purification by using IMA adsorbents. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Hassan (2012) Synthesis and characterization of skinned-oriented asymmetric low pressure nanofiltration membrane. PhD thesis, Universiti Malaysia Pahang.

Abdul Rahman, Ahmad (2015) Pelajar UMP harumkan nama universiti di KIDE 2015. CREATE . p. 22. ISSN 1823-7487

Abdul Sahli, Fakhruddin and Junaida, Sulaiman and Ruth Wong, Suk Yee (2007) Headache and Migraine Diagnosis Using Neural Networks. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007), 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Abdul Syukor, Abd Razak and Suryati, Sulaiman (2014) The Potential of Empty Fruit Bunch (EFB) as Artificial Bait for Subteranean Termite: Pisoptera. Energy Education Science and Technology Part a Energy Science and Research, 32 (1). pp. 325-338. ISSN 1308-772X

Abdul Syukor, Abd Razak and A. W., Zularisam and Ideris, Zakaria and Mohd. Ismid, Mohd. Said and Suryati, Sulaiman (2014) Treatment of Industrial Wastewater in Gebeng Area, Kuantan Pahang using Phytogreen System. Energy Education Science and Technology Part a Energy Science and Research, 32 (1). pp. 347-354. ISSN 1308-772X

Abdul Syukor, Abd Razak and Suryati, Sulaiman (2014) Treatment Of Industrial Wastewater Using Eichornia Crassipes, Pistia Stratiotes and Salvinia Molesta In Phytogreen System. Energy Education Science and Technology Part a Energy Science and Research, 32 (1). 339-346 . ISSN 1308-772X

Abdullah, Amira (2010) The effect of vacuum pressure on the flammability limits of hydrogen (H2) enriched liquefied petroleum gas (LPG) in a closed vessel. Faculty of Chemical & Natural Resources Engineering , University Malaysia Pahang.

Abdullah, Huzaifah (2010) The effect of nitrogen dilution and hydrogen enrichment on the explosive limits of liquefied petroleum gas (LPG). Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang.

Abdullah, Nor Anira (2010) Effect of ph and ionic strength on permeate flux during separation of lactobacillus plantarum by using hollow fiber crossflow microfiltration. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Abdullah, A. Mamun and Hans-Peter, Heim and M. D. H., Beg and S. Kim, Tan and Sahrim, H. Ahmad (2012) PLA and PP Composites with Enzyme Modified Oil Palm Fibre: A Comparative Study. Composites Part A: Applied Science and Manufacturing, 53 . pp. 160-167. ISSN 1359-835X

Abdullah, Adam and R. , Mamat and Nur Atiqah, Ramlan and Yoshiyuki, Kidoguchi and Azran, Zafri (2012) Analysis of Straight Vegetable Oil (SVO) Spray Characteristics at End of Injection (EOI). Journal of Medical and Bioengineering, 1 (1). pp. 59-62. ISSN 2301-3796

Abdullah, Anuar (2006) The treatment of sugar cane bagasse for subsequent use as substrate for cellulase production by Aspergillus Terreus Suk-1'. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdullah, Bawadi and Vo, Dai-Viet N. (2014) An Evaluation of Fish Scales as Potential Adsorbents:pH and Concentration Effect. Applied Mechanics and Materials, 625 . pp. 73-76.

Abdullah, Bawadi and Vo, Dai-Viet N. and Chowdhury, Sujan (2014) Modeling the Effect of Temperature-induced Surface Tension Gradient in Coating Processes. Advanced Materials Research, 917 . pp. 181-188. ISSN 1022-6680 (print), 1662-8985 (online)

Abeed Fatima, Mohidin Batcha and D. M. R., Prasad and Maksudur, R. Khan and Hamidah, Abdullah (2014) Biosynthesis of Poly (3-hydroxybutyrate)(PHB) by Cupriavidus Necator H16 from Jatropha Oil as carbon source. Bioprocess and Biosystems Engineering, 37 (5). pp. 943-951. ISSN 1615-7591 (print); 1615-7605 (online)

Abu, Yousuf and Maksudur, R. Khan and Islam, Amirul and Monir, Md Minhaj Uddin and A. W., Zularisam and Pirozzi, Domenico (2016) Application of Electroporation Technique in Biofuel Processing. In: Engineering Technology International Conference (ETIC 2016), 4-5 August 2016 , Ho Chi Minh City, Vietnam. pp. 1-4.. (In Press)

Abu, Yousuf and Maksudur, R. Khan and Islam, M. Amirul and A. W., Zularisam and Pirozzi, Domenico (2016) Technical Difficulties and Solutions of Direct Transesterification Process of Microbial Oil for Biodiesel Synthesis. Biotechnology Letters . pp. 1-11. ISSN 0141-5492

Abu Hannifa, Abdullah (2014) Effects of the modifier types to thermal, mechanical and barrier properties of polyactic acid/modified nanoclay nanocomposite. Masters thesis, Universiti Malaysia Pahang.

Abu Hannifa, Abdullah and Kamal, Yusoh and Mohamad Faiz, Mohamed Yatim and Siti Amirah, Nor Effendi and Wan Siti Noorhashimah, Wan Kamaruzaman (2014) Characterization Copper (II) Chloride Modified Montmorillonite filled PLA Nanocomposites. Advanced Materials Research, 858 . pp. 13-18. ISSN 1022-6680 (print), 1662-8985 (online)

Abu Hassan, Mohd Nazir (2012) Optimization of bacterial cellulose production in apple juice medium by using response surface methodology (RSM). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Abu Kashem Moshiul, Mohammad Alam (2012) Preparation and characterization of biodegradable poly lactid acid (PLA) composites with oil palm empty fruit bunch (EFB) fiber. Masters thesis, Universiti Malaysia Pahang.

Adam Mohd Izhan, Noor Azam (2012) A comparison study of liquid and vapor phase development at spray boundary of diesel spray, BDF and SVO spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adeebah, Jamar (2012) Chemical identification based on spectrogram. Faculty of Electrical and Electronic Engineering, Universiti Malaysia Pahang.

Adilah, Abd Rashid (2013) The study of drying parameter of carrageenan using spray dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adlina Farhana, Jamaluddin (2008) The effect of temperature and catalyst concentration of ultrasonic reactor for biodiesel production from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adnor Alhaimi, Adam (2012) Antioxidant Activity Of Ethanolic Extract Of Some Malaysian Herbs. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adzlin, Husin (2014) Extraction of kappa carrageenan from local seaweed. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afidatun Najwa, Mohd Sani (2012) Study the impact of coupling agent and fiber length on wood plastic composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afifah, Hapidz (2010) Conservation of energy and economic analysis for production of 50000MT/Annum of titanium dioxide plant by using pinch analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiq Hafizi, Azizi (2015) Photocatalytic seawater desalination: the effect of metal loading in the hybrid tio2 and the effect of wavelength. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiza, Abdullah Suhaimi and Aziela, Latif and Rohayu, Ahmmad Romzay (2014) Application of Elaeis Guineensis Leaves in Palm Oil Mill Effluent Treatment. Indian Journal of Science and Technology, 7 (3). pp. 254-261. ISSN 0974-6846 (Print); 0974-5645 (Online)

Ahmad, Siti Solehah (2010) Effect of Temperature and Ph on Glucose Production Using Enzymatic Hydrolysis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad, Mani Malam and Abd. Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman (2016) Application Of Factorial Design To The Stress Phenomenon Of Bacillus Cereus (Atcc 14579) Growth. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 148-156. ISSN 1991-8178

Ahmad Adzhim, Abdull Aziz (2014) Comparison of biodiesel properties produced from moringa oleifera oil and palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Afifi, Ibrahim (2013) Effect of pH and enzyme loading on the protein concentration during collocalia fuciphaga hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Aizuddin Faiz, Che Jaafar (2013) A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Akmal, Wahamid (2010) Development of nonlinear model for plug flow reactor process. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang.

Ahmad Amiruddin, Rosdi (2009) Warpage optimization of a name card holder using neural network model. Faculty of Mechanical Engineering , UNIVERSITI MALAYSIA PAHANG.

Ahmad Atiqurrahman, Hasan (2009) Simulation of heterogeneously catalyzed esterification for the production of biodiesel using reactive distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Bazli, Bustary (2010) Fabrication and antimicrobial analysis of composite biodegradable film from pumpkin starch. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Ahmad Fadhil Hanafi, Abdullah (2014) Production of membrane for co₂/n₂separation effect of diluents extraction time on pp-dpe membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Fadzli, Zakaria (2006) Extraction of gaharu essential oil using spinning band distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Fahmy, Jusoh (2010) Flow equations in commercial gas piping system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Fakhruddin, Ahmad Faudzi (2014) The study of transesterification of palm oil with excessive amount of ethanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Farimin, Ahmad Osman (2014) Kesan suhu dan agen pengkapsul terhadap ciri-ciri fizikokimia serbuk rosel-nanas (hibiscus sabdariffa-ananas comocus). Masters thesis, Universiti Malaysia Pahang.

Ahmad Firdaus, Mohd (2012) The effects of process parameters on concentration of dragon fruit juices via freeze concentration technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Haziq, Razali (2014) Foaming behaviour of an aqueous solution of n-methyldiethanolamine (mdea) and aqueous solution of piperazine (pz)-n-methyldiethanolamine (mdea) for the carbon dioxide removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Izamin, Ali (2010) Heat integration of fractionators for low temperature separation unit (LTSU) and product recovery unit (PRU). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Junaidy, Jaapar (2008) Extraction of gaharu essential oil using ultrasonic assisted steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Hassan (2009) Effects of transmembrane pressure (TMP) on the performance of ultrafiltration (UF) membrane of soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Masrur (2008) Microwave assisted extraction of patchouli essential oil using ethanol as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Anwar, Samsuddin (2008) The effects of the heating rate on the pyrolysis behavior of empty fruit bunch biomass. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Ahmad Khairul Azhar, Ahmad Kamal (2011) Sustainability approach in modeling and improvement of finger type slug catcher in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Nahri, Abdul Aziz (2009) Effect of enzyme loading and time on production of sugar from tapioca starch using enzymatic hydrolysis : a statistical approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Safwan, Abdul Halim (2012) The kinetic study of biodiesel production by using two step method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Shafiq, Mohamad (2010) Design,construction and commissioning of microalgae photobioreactor. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Shafiq, Hashim (2014) Adsorption of methylene blue from aqueous solution using tea waste in a continuous stirred tank reactor (cstr). Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Shahroom, Mohd Shah (2015) Recycling of nickel oxide from palm oil mill fuel ash (POMFA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syahrul, Mohamad (2009) Natural gas dehydration using triethylene glycol (TEG). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syauqi, Othman (2009) Study on emulsion stability and chemical demulsification characteristics. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syukri, Baharudin @ Ismail (2006) Fabrication of polysulfone membrane, the effect of additive polyvynil pyrrolidole (pvp) on membrane flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman (2015) FKKSA, Petronas LDPE kongsi kepakaran tangani letupan silo dan elektrostatik. CREATE . p. 25. ISSN 1823-7487

Ahmad Ziad, Sulaiman (2013) UMP lahir graduan sulung Sarjana Kejuruteraan Kimia dengan Keusahawanan. CREATE . p. 10. ISSN 1823-7487

Ahmad Ziad, Sulaiman UMP trains entrepreneurs on herbal extraction and processing techniques. Pekan Review, 9 . p. 68. ISSN 2180-3099

Ahmad Ziad, Sulaiman and Erna Wati, Ibnu Hajar and A. M. M., Sakinah (2014) Assessment of Heavy Metals Tolerance in Leaves, Stems and Flowers of Stevia Rebaudiana plant. Procedia Environmental Sciences, 20 . pp. 386-393. ISSN 1878-0296 (print); 1878-0296 (online)

Ahmad Ziad, Sulaiman and M. Y., Rosli and A.A, Badrulhisham and M.Y, Abu Azam (2004) Effect of Sonication for In-situ Stainless Steel Leaf Filtration. In: 10th Asia Pacific of Chemical Engineering Conference (APPChE) 2004 , 17 -21 October 2004 , Kitakyushu, Japan. .

Ahmad Zulfadzli, Ahmad Murad (2010) The study on heat distribution inside the combustion chamber of a gas fired pyrolysis system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Zulhelmi, Muhamad (2009) Mold design for plastics injection molding process (two colors) and analysis of gates location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulkhairi, Muhamad (2010) Oil palm biomass conversion to bio-oil through direct fired pyrolysis process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Aiman Hakim, Badarisman (2010) Modelling of high efficiency miniature aerocyclone. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Aimi Salma, Awalludin (2009) Scale up of biopolymer (PHB) fermentation from 500Ml shake flasks to 2L stirred tank fermentor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aimuni Izzati, Mohammad Yatim (2012) Separation of oil and water by using coconut coir. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ainal Marhaton, Abd Ghani (2011) Chemital diiktiraf. Harian Metro .

Aini, Ahmad (2007) Biotek bukan asing dalam Islam. Utusan Malaysia, 18 .

Aini Norhidayah, Mohamed (2011) Determination of thermal oxidation marker of frying palm oil in relation to total polar compounds. Masters thesis, Universiti Malaysia Pahang.

Ainihayati, Ismail (2012) Mathematical modeling of adsorption for wastewater treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ainin Sofia, Azni (2015) Optimisation of phenolic compounds extraction from misai kucing using RSM. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ainul Nadirah, Izaharuddin (2010) Scale up study on production of biodiesel from jatropha crude oil. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ainun Jariah, Sansuri (2010) Synthesis and swelling behavior of bentonite based superabsorbent polymer composities. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Airina, Zubir (2012) Removal of acrylic acid from process water using continuous adsorption. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Aiza, Abd Rahman (2013) Kinetic study of acetic acid production from banana stem waste using soil bacteria, Bacillus Thuringiensis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aizuddin, Abdul Malek (2010) A preparation of nitric acid from nitrogen dioxides using photocatalytic method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Mohd Hafizil, Mat Yasin (2014) Effect of Ambient Temperature on the Performance of a Diesel Engine Operating with Biofuel. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014, 26-27 August 2014 , Kuantan, Pahang. .

Akbari, Sweeta and Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Norlirabiatuladawiyah, Che Ani and Poddar, Pradeep (2014) Synthesis and Characterization of Medium Density Fiber Board by Using Mixture of Natural Rubber Latex and Starch as an Adhesive. Journal of the Indian Academy of Wood Science . pp. 1-7. ISSN 0972-172X(Print); 0976-8432(Online)

Akbari, Sweeta and N. H., Abdurahman and Fayaz, Fahim and Halimi, Mohammad Sediq and Nazari, Ahmadshah (2016) Analysis of Microwave Heating Process for Demulsification of Water-in-Crude Oil Emulsions. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 1-10. ISSN 1991-8178

Akbari, Sweeta and N. H., Abdurahman and Fayaz, Fahim (2015) The Influence of Process Parameters on Stability Of Water-In-Crude Oil Emulsion Stabilized by Span 80. International Journal of Engineering Sciences & Research Technology, 4 (5). pp. 526-534. ISSN 2277-9655

Akbari, Sweeta and N. H., Abdurahman and Saidatul Shima, Jamari and Fayaz, Fahim (2016) Rheology and Stability Mechanism of Water-in-crude Oil Emulsions Stabilized by Span 83. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2230-2235. ISSN 1819-6608

Akbari, Sweeta and N. H., Abdurahman and Saidatul Shima, Jamari and Rajabi, Abdul Qayom (2016) Demulsification of Water-in-Crude Oil Emulsion via Conventional Heating and Microwave Heating Technology in their Optimum Conditions. Australian Journal of Basic and Applied Sciences, 10 (4). pp. 66-74. ISSN 1991-8178

Akhtar, Muhammad Nadeem and Sahrim, Ahmad and Rozaidi, Rasid (2014) Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/Epoxidized Natural Rubber Blends. Journal of Elastomers & Plastics, 46 (4). pp. 338-354. ISSN 0095-2443 (print); 1530-8006 (online)

Akindoyo, Edward Oluwasoga and Hayder A., Abdul Bari (2016) Investigating the Drag Reduction Performance of Rigid Polymer–Carbon Nanotubes Complexes. Journal of Applied Fluid Mechanics, 9 (3). pp. 1041-1049. ISSN 1735-3572(Print); 1735-3645(Online)

Akindoyo, John Olabode (2015) Oil palm Empty Fruit Bunch (EFB) fiber reinforced poly(lactic) acid composites : effects of fiber treatment and impact modifier. Masters thesis, Universiti Malaysia Pahang.

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali (2015) Ultrasound Enhanced Structural Modification of Oil Palm Empty Fruit Bunch (OPEFB) Fiber/Poly(Lactic) Acid Composites. In: National Conference for Postgraduate Research (NCON-PGR 2015), 24-25 January 2015 , Universiti Malaysia Pahang (UMP). . (Unpublished)

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali and Jeyaratnam, Nitthiyah (2016) Effects of Ultrasound Treatment and Impact Modifier on Mechanical Properties of Oil Palm Fiber Reinforced Poly (Lactic) Acid Composites. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 437-444..

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali and M. R., Islam (2015) The Effects of Poly Dimethyl Siloxane on Water Absorption and Natural Degradation of Poly(lactic acid)/Oil Palm Empty Fruit Bunch Fiber Biocomposites. Journal of Applied Polymer Science, 132 (45). p. 42784. ISSN 1097-4628

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali and M. R., Islam (2015) The Effects of Wettability, Shear Strength, and Weibull Characteristics of Fiber-reinforced Poly(lactic acid) Composites. Journal of Polymer Engineering . ISSN 0334-6447 (Print); 2191-0340 (Online)

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali and M. R., Islam (2014) Minimizing Alkali Usage Through Ultrasound Treatment of Oil palm Empty fruit Bunch (OPEFB) Fiber Reinforced Poly(Lactic) Acid Composites. In: Proceedings of the 2nd International Conference on Green Technology & Ecosystem for Global Sustainable Development (ICGTec 2014), 24-25 November 2014 , Putrajaya. .

Akindoyo, John Olabode and M. D. H., Beg and Suriati, Ghazali and M. R., Islam and Al Mamun, Abdullah (2015) Preparation and Characterization of Poly(lactic acid)-Based Composites Reinforced with Poly Dimethyl Siloxane/Ultrasound-Treated Oil Palm Empty Fruit Bunch. Polymer-Plastics Technology and Engineering, 54 (13). pp. 1321-1333. ISSN 0360-2559 (Print); 1525-6111 (Online)

Akindoyo, John Olabode and Suriati, Ghazali and M. D. H., Beg (2015) Structural and Thermal Properties of Ultrasound Treated Oil Palm Empty Fruit Bunch (OPEFB) Fiber. In: Proceedings of Tenth TheIIER International Conference, 12 February 2015 , Kuala Lumpur. pp. 60-64..

Akindoyo Edward, Oluwasoga (2016) Effects of polymer and surfactant complex with microbubble on the flow enhancement of liquids in pipelines. PhD thesis, Universiti Malaysia Pahang.

Al-Dabbagh, Jinan B. and Razman, Mat Tahar and M., Ishak and Siti Aisyah, Harun Synthesis and Characterization of Nano Ti-50%AI by Mechanical Alloying. In: 7th International Conference on Advanced Computational Engineering and Experimentaly (ACE-X 2013), 1-4 July 2013 , Madrid, Spain. pp. 1-6.. (Unpublished)

Al-Ezzi, Ali Abdul Rahman and Najmuldeen, Ghazi Faisal and K., Ramesh (2014) Hydrodynamic Characteristics in Internal Air Lift Loop Reactor. World Applied Sciences Journal, 21 (11). pp. 1930-1937. ISSN 1818-4952

Al-Muhandisah, . (2012) Kejuruteraan Kimia di dalam Al-Quran. CREATE . pp. 48-49. ISSN 1823-7487

Alaa, Ali and Kamal, Yusoh and S. F., Hasany (2014) Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols. Journal of Nanomaterials . pp. 1-9. ISSN 1687-4110 (print); 1687-4129 (online)

Alaa Mashjel, Ali (2015) Synthesis of novel high performance Polyurethane nanocomposites from castor oil as renewable Polyol : study on mechanical, thermal and barrier properties. PhD thesis, Universiti Malaysia Pahang.

Alam, A. K. M. Moshiul and M. D. H., Beg and M. Y., Rosli (2016) Micro structure and Fractography of Multiwalled Carbon Nanotube Reinforced Unsaturated Polyester Nanocomposites. Polymer Composites . pp. 1-10. ISSN 1548-0569 (In Press)

Alam, A. K. M. Moshiul and M. D. H., Beg and M. Y., Rosli and Mina, Md. Forhad and Maria, K. H. and Mieno, T. (2015) Evolution of Functionalized Multi-walled Carbon Nanotubes by Dendritic Polymer Coating and their Anti-scavenging Behavior During Curing Process. Materials Letters, 167 (March). pp. 58-60. ISSN 0167-577X

Alam, Jahangir and Das, Bipul Chandra and Rahman, Md. Wasikur and Biswas, Biplob Kumar and Maksudur, R. Khan (2015) Removal of Dark Blue-GL from Wastewater using Water Hyacinth: A Study of Equilibrium Adsorption Isotherm. Desalination and Water Treatment, 56 (6). pp. 1520-1525. ISSN 1944-3994

Alam, Jahangir and Rahman, Md. Wasikur and Mazid, Russel A. and Maksudur, R. Khan (2015) Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application. International Journal of Polymer Analysis and Characterization, 20 (5). pp. 426-434. ISSN 1023-666X

Ali, Eman N. (2014) Biosorption of Cd(II) from Water by Moringa Oleifera Leaves. Advanced Materials Research, 925 . pp. 223-227. ISSN 1022-6680 (print), 1662-8985 (online)

Ali, Eman N. and Ahmad Adzhim, Abdull Aziz (2015) Comparison of Biodiesel Properties Produced from Moringa oleifera Seeds Oil and Palm Oil. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM) , Melaka, pp. 261-265. ISBN 978-967-0257-53-2

Ali, Eman N. and Anis Farhana, Abd Razak (2014) An Investigation of Producing Activated Carbon from Moringa Oleifera Seeds Husk. In: Conference Proceedings of ACEAT and ICESAS 2014, October 2014 , Osaka, Japan. pp. 409-415..

Ali, Eman N. and Nazik, Musa (2013) An investigation of Anti -Cancer Activity of Moringa Oleifera Leaves. In: 11th International Symposium on Biocontrol and Biotechnology (ISBB 2013), 1 - 4 October 2013 , Alexandria-Egypt. pp. 1-6..

Ali, Eman N. and Suleyman, A. Muyibi and Md Zahangir, Alam and Hamzah, M. Salleh (2012) Optimization of Water Treatment Parameters using Processed Moringa oleifera As a Natural Coagulant for Low Turbidity Water. In: 2012 International Conference on Statistics in Science, Business and Engineering (ICSSBE2012), 10-12 September 2012 , Langkawi, Kedah. .

Ali, Eman N. and Tay, Cadence Isis (2013) Characterization of Biodiesel Produced from Palm Oil via Base Catalyzed Transesterification. Procedia Engineering, 53 . pp. 7-12. ISSN 1877-7058

Ali, Abdalla A. M. and Hawege, Emsalem Faraj and Almatar, Manaf and Heyam, I. M. Al-Astal and Aladdin, Azzam (2014) Production of Xylanase Enzyme from AspergillusTerreus SUK-1. International Journal of ChemTech Research, 6 (11). pp. 4884-4889. ISSN 0974-4290

Ali, Abdul Rahman and Najmuldeen, Ghazi Faisal (2013) Effects of Adding Alcohols, Electrolytes and Carboxyl Methyl Cellulose (CMC) on Design Parameters in Internal Loop Airlift Bubble Column. International Journal of Engineering Sciences & Research Technology , 2 (12). pp. 3415-3426. ISSN 2277-9655

Ali, Eman N. (2012) Moringa Oleifera Miracle Tree For Green Technology: A Review. In: International Conference on Green Technology (ICGTE 2012), 28-30 May 2012 , Universiti of TUZLA, Bosnia. pp. 1-12..

Ali, Eman N. (2014) Moringa oleifera Leaves Possible Uses as Environmentally Friendly Material: A Review. International Journal of Chemical, Environmental and Biological Sciences (IJCEBS), 2 (2). pp. 160-164. ISSN 2320-4079 (printed); 2320-4087 (online)

Ali, Eman N. (2016) Removal of Copper from Water System using Moringa oleifera Press Cake. In: International Association of Civil, Agricultural & Environmental Engineering Researchers (ACEE-16), 18-19 April 2016 , Istanbul City, Turkey. pp. 15-18.. ISSN 0126-6039 ISBN 978-93-84468-49-1

Ali, Eman N. and Alfarra, Sabreen R. and Mashitah, M. Y. (2014) Removal of Heavy Metals by Natural Adsorbent: Review. International Journal of Biosciences (IJB), 4 (7). pp. 130-139. ISSN 220-6655 (Print); 2222-5234 (Online)

Ali, Eman N. and Alfarra, Sabreen R. and Mashitah, M. Y. and Lutfor, M. R. (2015) Environmentally Friendly Biosorbent from Moringa Oleifera Leaves for Water Treatment. International Journal of Environmental Science and Development, 6 (3). pp. 165-169. ISSN 2010-0264

Ali, Eman N. and K. N. S., Muhamad (2016) Comparison of Moringa Oleifera Seeds Oil Characterization Produced Chemically and Mechanically. IOP Conference Series: Earth and Environmental Science, 36 . pp. 1-7. ISSN 1755-1315

Ali, Eman N. and M. Z., Jamaludin (2015) Possibility of Producing Ethanol from Moringa Oleifera Pod Husk. Journal of Advanced Research Design , 5 (1). pp. 1-9. ISSN 2289-7984

Ali, Eman N. and Mohamad Syazwan, Abdul Halim (2015) Comparison of Bioethanol Yield Produced from Moringa Oleifera Seeds Husk Removed Manually and Mechanically. In: 4th International Scientific Conference on Apllied Science & Engineering, 3-4 October 2015 , Langkawi. pp. 1-6., 4. ISSN 2415-2072 (Online); 2518-2552 (Print)

Ali, Eman N. and Tan, C. S. and Essam, A. Makky (2014) Impact of Moringa oleifera Cake Residue Application on Waste Water Treatment: A Case Study. Journal of Water Resource and Protection, 6 . pp. 677-687. ISSN 1945-3094 (print); 1945-3108 (online)

Ali, Eman N. and Tan, Chu Shan and Essam, A. Makky and Al-Matar, Manaf (2014) The Use of Moringa Oleifera Seed as a Natural Coagulant for Wastewater Treatment and Heavy Metals Removal. Jokull Journal, 64 (8). pp. 189-200. ISSN 0449-0576

Ali, Eman N. and Umarul, I. A. (2015) Possibility of Producing bioethanol from Moringa oleifera Press Cake. In: Proceedings of The Energy & Materials Research Conference (EMR2015): "Materials and Technologies for Energy Efficiency", 25-27 February 2015 , Madrid, Spain. pp. 22-25..

Ali, Gomaa A. M. and Wahba, Osama A.G and Hassan, Ali M. and Fouad, Osama A. and K. F., Chong (2015) Calcium-based Nanosized Mixed Metal Oxides for Supercapacitor Application. Ceramics International, 41 (6). pp. 8230-8234. ISSN 0272-8842

Ali, Md. Yousuf and Rahman, Md. Wasikur and Moniruzzaman, Md. and Alam, Md. Jahangir and Saha, Indrajit and Halim, Md. Abdul and Deb, Anjan and Sumi, Mst. Sumaia Akter and Parvin, Shahanaz and Biswas, Biplob Kumar and Haque, Md. Azizul and Maksudur, R. Khan and Khan, Mala (2016) Nypa Fruticans As A Potential Low Cost Adsorbent To Uptake Heavy Metals From Industrial Wastewater. In: Conference of Engineering & Technology, Computer, Basic & Applied Sciences (ECBA 2016), 25-26 January 2016 , Singapore. pp. 18-25., 55 (5). ISBN 978-969-670-137-8

Aliaa Diyana, Abdul Hisham (2012) Determination of stevioside and rebaudioside a in Stevia rebaudiana leaves via preparative HPLC. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Amalina, Roslan (2014) Adsorption of cd(ii), ni(ii) and cu(ii) using activated rock melon shell waste : kinetics and equilibrium. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amarasingam, Selvarajah (2014) Cfd simulation study on the effect of water velocity towards oil leakage from submarine pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ambarwati, Dessy (2011) Characterization and process optimization of Melastoma malabathricum l. extract. Masters thesis, Universiti Malaysia Pahang.

Ambikapathi, A. Vishnushama (2010) Improvement of alum & PACL coagulants for the treatment of pulp and paper mill wastewater. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amir Lukmanhisyam, Haili (2014) Esterification of free fatty acids in simulated waste cooking oil using sulphuric acids as catalyst: pre-treatment of feedstock for biodiesel production. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang.

Amir Rahimie, Ridzuan (2012) Adsorption of methylene blue using activated carbon from mixed of palm oil press fibres and empty fruit bunch. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amirah, Izam (2009) Characterization of extracted fish oil from eel : effects of process parameters on extraction yield paremetres : a) drying temperature b) solvent different. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amirah, Izam (2012) Solid-liquid extraction of hydrolysable tannin (galic acid) from stem bark of Jatropha Curcas using various type of extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amiruddin, Fadzli Zaini and Balu, Ranganathan and Subramaniam , Sundarrajan and Seeram , Ramakrishna (2014) Coaxial Electrospun Nanofibers as Pharmaceutical Nanoformulation for Controlled Drug Release. In: 14th International Conference on Nanotechnology (IEEE-NANO), 18-21 Aug. 2014 , Toronto, ON, Canada. pp. 531-534..

Amminatul Farhayu, Abdul Talib (2008) Biodiesel production via two steps catalyzed process : the study on effect of temperature and catalyst weight percent to the biodiesel yield, FFA content and acid value. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) Application of Computational Fluid Dynamics (CFD) Simulations to Spray-Freezing Operations. Drying Technology, 28 (1). pp. 94-102. ISSN 0737-3937

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) A Study of Particle Histories During Spray Drying using Computational Fluid Dynamic Simulations. Drying Technology, 28 (5). pp. 566-576. ISSN 0737-3937

Anas, Mohd Naim (2012) Synthesis and characterization of Co/SBA-15 catalysts for Fischer-Tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ang, Ming Key (2014) Investigating the effect of polymer-surfactant complexes on the flow behaviour in pipelines. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anizan, Wan Ramli (2008) Refrigeration study for domestic application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ann, Lim Jo (2010) Formulation of natural drag-reducing agent from malabar spinach for aqueous liquid flowing in turbulent mode through pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ann, Ivy Wong Fui (2014) Modeling and simulation of distillation column. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anthony, Latisha (2012) Modification of nanofiller to improve the final properties of polylactic acid(PLA)nanocomposites. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Anuj, Kumar (2013) Influence of nanofillers on the properties of urea formaldehyde resin and medium density fiberboard. PhD thesis, Universiti Malaysia Pahang.

Anuj, Kumar and Gupta, Arun and K. V., Sharma and Mohammed, Nasir and Khan, Tanveer Ahmed (2013) Influence of Activated Charcoal as Filler on the Properties of Wood Composites. International Journal of Adhesion and Adhesives, 46 . pp. 34-39. ISSN 0143-7496

Aqilah, Yahya (2013) Biodiesel production from moringa oleifera seeds using heterogeneous acid and alkali catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Arkan Jasim, Hadi and Ghazi Faisal, Najmuldeen and Iqbal, Ahmed (2012) Polyolefins Waste Materials Reconditioning Using Dissolution/Reprecipitation Method. APCBEE Procedia, 3 . pp. 281-286.

Arman, Abdullah and Nordin, Yahaya and Norhalizan, Md Noor and Rosilawati, Mohd Rasol (2014) Microbial Corrosion of API 5L X-70 Carbon Steel by ATCC 7757 and Consortium of Sulfate-Reducing Bacteria. Journal of Chemistry, 2014 . pp. 1-7. ISSN 2090-9063 (Print); 2090-9071 (Online)

Arumugam, Gayathri (2010) Separation of goat milk to whey protein by cross flow filtration using hollow fibre membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

As Eleyana, Ali (2013) Modelling and Environmental Assessment of Heterogeneous Catalysis Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Asdarina, Yahya (2006) Extraction ofascorbic acid from fresh pineapple. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asdarina, Yahya (2011) Kajian terhadap pelbagai teknik pengekstrakan minyak pati dari tanaman nilam (pogostemon cablin benth). Masters thesis, Universiti Malaysia Pahang.

Ashwin Charles, Benedict (2009) Extraction of the essential oil of Aquilaria Malaccensis (gaharu) using hydro-distillation and solvent extraction methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ashwinder, Chelliah (2015) Separation of essential oil from mixtures of melissa officinalis and cymbopogan citratus leaves for mosquito repellent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asma Shufieyah, Zainal Abidin (2009) Adsorption of phenol by activated carbon produced from decanter cake. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asmadi, Ali @ Mahmud (2013) Synthesis, Characterizationa Performance of Polysulfone/Cellulose Acetate Phthalate/ Polyvinylpyrrolidone (Psf/CAP/PVP) Blend Ultrafiltration Membranes. PhD thesis, Universiti Malaysia Pahang.

Asmadi, Ali and M. Y., Rosli and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2014) Effect of Cellulose Acetate Phthalate (CAP) on Characteristics and Morphology of Polysulfone/Cellulose Acetate Phthalate (PSf/CAP) Blend Membranes. Applied Mechanics and Materials, 493 . pp. 640-644. ISSN 1662-7482

Asmadi, Ali and M. Y., Rosli and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2015) Effect of Shear Rate on Characteristics, Performance and Morphology of Polysulfone Blend Membranes. Applied Mechanics and Materials, 699 . pp. 305-310. ISSN 1662-7482

Asmadi, Ali and M. Y., Rosli and Mohamad, Awang and Mohd Azizi, Che Yunus (2015) Influence of Hydrophilic Polymer on Proteins Separation, Molecular Weight Cut-off (MWCO) and Average Pore Size of Polysulfone Blend Membrane. Jurnal Teknologi (Sciences and Engineering), 74 (7). pp. 53-56. ISSN 0127-9696 (print); 2180-3722 (online)

Asmahani, Abdul Kadir (2009) A numerical study on the effect of gasolie-hydrogen fuel blend on engine power and torque at medium and high engine speed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Juliawati, Alias (2014) Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas. Applied Mechanics and Materials, 695 . pp. 98-101. ISSN 1662-7482

Asmida, Ideris (2014) Carbon formation inhibition in solid oxide fuel cells (SOFCs) using H2S. PhD thesis, University of Waterloo.

Asong, Angkat (2008) The removal of plumbum and zinc using activated carbon. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asyuaraa, Sukmarsari (2009) Effect of different enzymes and optimization of cultural conditions on xylose production using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Atabani, A. E. and Mahlia, T. M. I. and Masjuki, H. H. and Irfan Anjum, Badruddin and Wan Mohd Hafizuddin, Wan Yussof and Chong, W. T. and Teong Lee, Keat (2013) A Comparative Evaluation of Physical and Chemical Properties of Biodiesel Synthesized from Edible and Non-Edible Oils and Study on the Effect of Biodiesel Blending. Energy, 58 . pp. 296-304. ISSN 0360-5442 (Print), 1873-6785 (Online)

Atikah, Mad Nawi (2013) Formulation of Shampoo From Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Atnaw, Samson M. and Shaharin, A. Sulaiman and Japar, Abdul Rahman (2014) Study on Co-Gasification of Oil Palm Fronds and Wood. In: International Renewable and Sustainable Energy Conference (IRSEC 2014), 17-19 October 2014 , Congress Palace Ouarzazate, Morocco. pp. 536-541..

Attiyah, Ariffin (2010) Production of zeolites from oil palm ash. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Auni Hamimi, Idris (2015) Incorporating energy generation process in environmental assessment of a biopharmaceutical process. Masters thesis, Universiti Malaysia Pahang.

Avazpour, Mahrokh and Hayder A., Abdul Bari (2015) Rheology Charactrization of Drag Reducing Agents. In: National Postgraduate Conference 2015, 24-25 January 2015 , Universiti Malaysia Pahang. pp. 1-2.. (Unpublished)

Awadalla, Mohamed Osman and N. H., Abdurahman (2016) Diagnostics of Electron Temperature in Laser Produced Plasma from Iron Using Plasma X-ray Emission. Australian Journal of Basic and Applied Sciences, 10 (17). pp. 107-113. ISSN 1991-8178

Awang, Kamaruzaman (2010) Formaldehyde emission from wood based panels. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayodele, Bamidele V. and C. K., Cheng (2016) Biorefinery for the Production of Biodiesel, Hydrogen and Synthesis Gas Integrated with CHP from Oil Palm in Malaysia. Chemical Product and Process Modeling . ISSN 2194-6159 (print); 1934-2659 (online)

Ayodele, Bamidele V. and C. K., Cheng (2015) Modelling and Optimization of Syngas Production from Methane Dry Reforming Over Ceria-Supported Cobalt Catalyst Using Artificial Neural Networks and Box–Behnken Design. Journal of Industrial and Engineering Chemistry, 32 . pp. 246-258. ISSN 1226-086X

Ayodele, Bamidele V. and C. K., Cheng (2015) Process Modelling, Thermodynamic Analysis and Optimization of Dry Reforming, Partial Oxidation and Auto-Thermal Methane Reforming for Hydrogen and Syngas Production. Chemical Product and Process Modeling, 10 (4). pp. 211-220. ISSN 2194-6159 (print); 1934-2659 (online)

Ayodele, Bamidele V. and Hossain, M. Anwar and Nor Shahirah, Mohd Nasir and Maksudur, R. Khan and C. K., Cheng (2016) Synthesis, Characterization and Catalytic Performance of Samarium Sesquioxide supported Cobalt Catalyst for Methane Dry Reforming to Syngas. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 809-819..

Ayodele, Bamidele V. and Hossain, Mohammed Anwar and Chong, Soo Ling and Soh, Jiah Chee and Abdullah, Sureena and Maksudur, R. Khan and C. K., Cheng (2016) Non-Isothermal Kinetics and Mechanistic Study of Thermal Decomposition of Light Rare Earth Metal Nitrate Hydrates using Thermogravimetric Analysis. Journal of Thermal Analysis and Calorimetry . pp. 1-13. ISSN 1388-6150 (print); 1588-2926 (online)

Ayodele, Bamidele V. and Hossain, Sk Safdar and Lam, Su Shiung and Osazuwa, Osarieme U. and Maksudur, R. Khan and C. K., Cheng (2016) Syngas Production from CO2 Reforming of Methane over Neodymium Sesquioxide Supported Cobalt Catalyst. Journal of Natural Gas Science and Engineering, 34 . pp. 873-885. ISSN 1875-5100

Ayodele, Bamidele V. and Maksudur, R. Khan and C. K., Cheng (2016) Catalytic Performance of Ceria-supported Cobalt Catalyst for CO-rich Hydrogen Production from Dry Reforming of Methane. International Journal of Hydrogen Energy, 41 (1). pp. 198-207. ISSN 0360-3199 (In Press)

Ayodele, Bamidele V. and Maksudur, R. Khan and C. K., Cheng (2016) Greenhouse Gases Mitigation by CO2 Reforming of Methane to Hydrogen-rich Syngas using Praseodymium Oxide Supported Cobalt Catalyst. Clean Technologies and Environment Policy . pp. 1-13. ISSN 1618-954X (Print); 1618-9558 (Online)

Ayodele, Bamidele V. and Maksudur, R. Khan and C. K., Cheng (2016) Production of CO-rich Hydrogen Gas from Methane Dry Reforming over Co/CeO2 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 210-219. ISSN 1978-2993

Ayodele, Bamidele V. and Maksudur, R. Khan and C. K., Cheng (2015) Syngas Production from CO2 Reforming of Methane Over Ceria Supported Cobalt Catalyst: Effects of Reactants Partial Pressure. Journal of Natural Gas Science and Engineering . pp. 1-8. ISSN 1875-5100 (In Press)

Ayodele, Bamidele V. and Maksudur, R. Khan and Lam, Su Shiung and C. K., Cheng (2016) Production of CO-rich Hydrogen from Methane Dry Reforming Over Lanthania-Supported Cobalt Catalyst: Kinetic and Mechanistic Studies. International Journal of Hydrogen Energy, 41 (8). pp. 4603-4615. ISSN 0360-3199

Ayodele, Bamidele V. and Maksudur, R. Khan and Nooruddin, Sk Safdar and Cheng, Chin Kui (2016) Modelling and Optimization of Syngas Production by Methane Dry Reforming Over Samarium Oxide Supported Cobalt Catalyst: Response Surface Methodology and Artificial Neural Networks Approach. Clean Technologies and Environmental Policy, 19 (93). pp. 1-13. ISSN 1618-954X(Print); 1618-9558(Online)

Ayuni, Mohamad Ali (2015) Pretreatment of forestry residue via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ayuni Athirah, Azman (2013) Effect of ph solution on the water absorbency of superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azhar, Yusop (2008) Conceptual design of two-plate injection mould for UMP's keychain. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azhari, Anuar (2010) Biotransformation of phenol using immobilized polyphenol oxidase from banana stem. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azhari, H. Nour and Mashitah, M. Y. and Mohammed, S. B. and N. H., Abdurahman and Mazza, A. S. (2014) Growth Inhibitory Effect On Bacteria Of Swietenia Macrophylla King Seeds And Leaves Crude Alkaloid Extracts. International Journal of Pharmaceutical Sciences and Research , 5 (8). pp. 3204-3208. ISSN 2320-5148 (print); 0975-8232 (online)

Azhari, H. Nour and Mohammed, Sulieman and Mashitah, M. Y. and N. H., Abdurahman and Mazza, M. Adam (2016) Bioassay-guided Isolation and Identification of Antifungal Compounds from Seeds of Swietenia Macrophylla King. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 55-62. ISSN 1991-8178

Azhari, H. Nour and N. H., Abdurahman and Mashitah, M. Y. and Jessinta, D/O Sandanasamy (2012) Bioactive Compounds from Basil (Ocimumbasilicum) Essential Oils with Larvicidal Activity against Aedesaegypti Larvae. In: 3rd International Conference on Biology, Environment and Chemistry, 24-25 November 2012 , Bangkok, Thailand. .

Azian, Othman (2013) Investigation on the potential of orange peel waste in the production of useful homemade solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azilah, Ajit and Ahmad Ziad, Sulaiman and Chisti, Yusuf (2017) Production of Bioethanol by Zymomonas Mobilis in High-gravity Extractive Fermentations. Food and Bioproducts Processing, 102 . pp. 123-135. ISSN 0960-3085

Azimah, Saman and A. M. M., Sakinah (2014) Resistance in Series Model for Ultrafiltration of Betacyanin from Hylocereus Polyrhizus Peels. Journal of Applied Sciences, 14 (12). pp. 1343-1346. ISSN 1812-5654 (print); 1812-5662 (online)

Azimah, Saman and A. M. M., Sakinah and A. W., Zularisam (2016) Contribution of membrane fouling during Ultrafiltration of Hylocereus Polyrhizus Peel Extract. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 65-70..

Azimah, Saman and A. M. M., Sakinah and A. W., Zularisam (2016) Extraction of Betacyanin from Hylocereus Polyrhizus Peel Effect of Operating Conditions. In: International Conference in Organic Chemistry (ICOS2016), 21-24 August 2016 , Kuching, Sarawak, Malaysia. pp. 1-7.. (Unpublished)

Azizan, Abdul Aziz (2006) Development of hplc analysis for detection of lycopene in tomato and crude palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz (2014) The Development of An Initial Framework for Multi-Firm Industrial Safety Management Based On Cooperative Relationship: A Malaysia Case Study. International Journal of Disaster Risk Reduction . pp. 1-13. ISSN 2212-4209

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz (2014) A Preliminary Study on Industrial Safety Management in Malaysia: The Viewpoints of Safety Experts and Practitioners. Journal of Applied Science and Agriculture, 9 (11). pp. 53-62. ISSN 1816-9112

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz and Nor Azman, Ngah (2014) The Cooperative Approach in Managing Safety Issues for Halal Industrial Parks in Malaysia: Embracing Opportunity. Progress in Industrial Ecology, an International Journal, 8 (4). pp. 295-318. ISSN 1476-8917 (Print) 1478-8764 (Online)

Azizan, Ramli and Mohd Shaiful Zaidi, Mat Desa (2011) The Importance of Ecological and Spiritual Approaches in Chemical Engineering towards Practical Conception of Sustainable Development. In: The Inaugural Asian Conference on Sustainability, Energy and the Environment 2011, 2-5 Jun , Osaka, Japan. .

Azizul Helmi, Sofian and Kazuhiko, Noda (2015) The Investigation of Zinc-Rich Paint (ZRP) Behavior in NaCl Solution by Electrochemical Methods. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 3-7. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Azliya, Abd Rahman (2009) Study on the effect of different sizes and the quality of the tiger prawns (Penaeus Monodon) dried using freeze dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azma, Abdullah and Nik Kamariah, Nik Ismail and Jasni, Mohamad Zain (2007) Sistem Kenalpasti Gred Kayu Gaharu Menggunakan Pemprosesan Gambar. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007), 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Azmi, Mohd Shariff and Hanida, Abdul Aziz and Noor Diana, Abdul Majid (2016) Way forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14 . pp. 56-60. ISSN 2211-3398

Azni Yusra, Ahmad Kasmiri (2013) Developments of 2 Inches Loop Pipelines for Paraffin Deposition Testing Facility Using Plant Design Management System (PDMS). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Aznizan, Shaari (2010) Optimization of glucose production from enzymatic hydrolysis of rice straw using response surface methodology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azri, Abdullah (2010) CFD simulation of gas-liquid hydrodynamics in aerated stirred tank. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azri, Alias and Kuwagi, Kenya and Kogane, Atsuto and Hirano, Hiroyuki and Takami, Toshihiro (2014) Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses. Chemical Engineering Science, 119 . pp. 199-211. ISSN 0009-2509

Azrul Ariff, Abdul Halim @ Abdullah (2010) The biopetrol synthesis from palmitic acid-heterogenous catalytic cracking with zeolite catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azrul Azmi, Yaziz (2006) Production of bioethanol from biomass waste (sugarcane). Faculty of Chemical & Natural Resources Engineering, Universiti Mlaysia Pahang.

Azrulrizawati, Abd Hamid (2013) Characterisation and Biological Activities of Tinospora Crispa (Menispermaceae) Extract with Emphasis on Alkaloids. PhD thesis, Universiti Malaysia Pahang.

Azura, Amid and Nurul Azira, Ismail and Zatul Iffah, Mohd Arshad (2015) Case Study: Recombinant Bromelain Selection. In: Recombinant Enzymes - From Basic Science to Commercialization. Springer International Publishing, Switzerland, pp. 143-157. ISBN 978-3-319-12396-7 (Print); 978-3-319-12397-4 (Online)

Azwan, Harun and Nik Khairul Irfan, Nik Ab Lah and Hazlina, Husin and Zulkafli, Hassan (2016) An Overview of Wax Crystallization, Deposition Mechanism and Effect of Temperature & Shear. In: International Conference on Industrial Engineering, Management Science and Application (ICIMSA), 23-26 MAY 2016 , Jeju Island, South Korea. pp. 1-5.. ISBN 978-1-5090-1671-6

Azwin, Ahmad and Mimi Sakinah, Abdul Munaim and S. Mohd, Ahmadi (2016) Optimization of Gluten Free Bread Formulation by Adding Xanthan Gum, Potato Starch and Sorbitol Using Response Surface Methodology. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 607-615..

Azyyati, Johari (2010) Effect of nonsolvent additive on development of polyethersulfone (PES) membrane for 02/N2 separation. Faculty of Chemical and Natural Resources Engineering , Universtiti Malaysia Pahang.

Azyyati, Abd Hamid (2015) Ultrasonic extraction of palm pressed fibre for oil recovery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

B

B., Abdul Aziz (2015) Future Prospect for Engineering Technology. In: Academic Festival, Terengganu Advanced Technical Institute University College (TATIUC), 13 May 2015 , Terengganu. pp. 1-34.. (Unpublished)

B., Abdul Aziz and Daing Nasir, Daing Ibrahim and Gharayeb, O. and Ibrahim, A. (2015) The Process and Challenges of International Academic Collaboration in STEM. In: NAFSA 2013 Annual Conference & Expo, 28-31 May 2013 , St Louis, USA. pp. 1-18., 8 (1). ISSN 1738 - 9984 (Unpublished)

B., Ghobadian and P., Nematizade and G., Najafi (2012) Investigation of Fossil Fuel and Liquid Biofuel Blend Properties Using Artificial Neural Network. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan . pp. 639-647. ISSN 2229-8648 (Print); 2180-1606 (Online)

Badhrulhisham, Abdul Aziz and Azizan, Ramli and Mazlin, Mokhtar (2014) Revisiting the Concept of Development, Disaster and Safety Management: The Quranic Perspective. International Journal of Disaster Risk Reduction, 9 . pp. 26-37. ISSN 2212-4209

Badhrulhisham, Abdul Aziz (2013) Establishment of Malaysian Rare Earth Industry as Contribution to the Green Technology Initiatives. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3-4 December 2013 , MS Garden Hotel, Kuantan. . (Unpublished)

Badhrulhisham, Abdul Aziz (2014) Establishment of Malaysian Rare Earth Industry: Challenges and Opportunity in Energy and Environmental Aspects. In: International Conference on Recent Advancement in Chemical, Environmental and Energy Engineering (RACEE 2014), 27 February 2014 , Chennai, India. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Future Direction and Challenges of Malaysian Rare Earth Industry as a Potential Green Economy Engine. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28 - 29 August 2013 , Kuantan, Pahang. . (Unpublished)

Badhrulhisham, Abdul Aziz (2014) Future Direction of Malaysian Rare Earth Industry: From Establishing R&D to Human Capital Development. In: The 5th International Workshop on Industrial Technology of Rare Metals, 9 July 2014 , Incheon, Korea. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Malaysian Board of Technology (MBOT) and The Future of Technicians. In: Inaugural National Conference for Technicians and TVET Semi-Professionals, 7 Oct 2013 , Kuching, Sarawak. . (Unpublished)

Badhrulhisham, Abdul Aziz (2015) Opportunities and Challenges of Engineering Technology Education for Developing Countries. In: Proceedings of Engineering Technology International Conference (ETIC 2015), 10-11 August 2015 , Bali, Indonesia. .

Badhrulhisham, Abdul Aziz (2013) Roles and Contribution Of Universities in Managing Controversial Issues in Community: Case Study Of UMP’s Involvement in Lynas Project. In: National Conference on Higher Education Institution and Community Engagement, 26-27 August 2013 , Universiti Malaysia Kelantan, Jeli, Kelantan. . (Unpublished)

Badhrulhisham, Abdul Aziz and Siti Ilyani, Rani and Jolius, Gimbun (2014) Dust and Fire Explosion in Malaysia : A Review. In: 3rd Seminar on Developing and Sustaining Safety Culture in Malaysia (DSSCM III), 26-27 May 2014 , Kuantan, Pahang. . (Unpublished)

Bahari, Mahadi B. and Ming, Fiona-Ling W. and Fayaz, Fahim and Nurul, Ainirazali and Phuc, Nguyen Huu Huy and Vo, Dai-Viet N. (2016) Evaluation of Co-promoted Ni/Al2O3 Catalyst for CO2 Reforming of Ethanol. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7249-7253. ISSN 1819-6608

Bahari, Mahadi B. and Nguyen, Huu Huy Phuc and Nurul Aini, Razali and Vo, Dai-Viet N. (2015) Evaluation of La-promoted Ni/Al2O3 Catalyst for Ethanol Dry Reforming. In: The 15th Korea - Japan Symposium on Catalysis, 26-28 May 2015 , Busan, Republic of Korea. . (Unpublished)

Bahrun, Mohd Shakir (2013) Production of Modified Cassava Flour (MOCAF). Masters thesis, Universiti Malaysia Pahang.

Bahrun, Mohd Shakir (2010) Treatment of industrial detergent wastewater via membrane separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Baiyinah, A.Talip (2010) Effect of inoculum concentration on butanol and ethanol production by clostridium acetobutylicum. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Balqis, Adam (2013) Development of natural adhesive using lignin and soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Bangga, Christabel Melanie (2012) Fabrication and comparison between poymeric membrane with mixed matrix membrane on their prformance for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Baranitharan, E. (2014) The Potentiality of microbial fuel cell anode with enhanced electron transfer. Masters thesis, Universiti Malaysia Pahang.

Basheer, Esmail Abdullah Mohammed (2016) Investigating the effect of design parameters on the performance of microfluidics electrochemical biosensor. Masters thesis, Universiti Malaysia Pahang.

Bee Tin, Chew (2012) Kinetic evaluation of sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Bello, Ibrahim Garko (2013) Development of new green demulsifier composition for oil production. Masters thesis, Universiti Malaysia Pahang.

Benedict, Maurice Lojikip (2012) One dimensional simulation of diesel hydrogen dual fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bhuiyan, Md. Khairul Hassan and Rahman, Md. Mahbubur and Mina, Md. Forhad and M. R., Islam and Gafur, Md. Abdul and Begum, Afia (2013) Crystalline Morphology and Properties of Multi-walled Carbon Nanotube Filled Isotactic Polypropylene Nanocomposites: Influence of Filler Size and Loading. Composites Part A: Applied Science and Manufacturing, 52 . pp. 70-79. ISSN 1359-835X

Boey, Peng Lim and Gaanty Pragas, Maniam and Shafida, Abd Hamid and Mohamed Hag Ali, Dafaalla (2011) Utilization of Waste Cockle Shell (Anadara granosa) in Biodiesel Production from Palm Olein : Optimization Using Response Surface Methodology. Fuel, 90 (Issues). pp. 2353-2358. ISSN 0016-2361

Boon Huey, Teow (2015) Development of nanofiltration flat sheet membrane for biorefinery application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Bryan Lester, Binar (2009) Esterification Of Octanoic Acid And Ethanol Using Sulfated Zirconia In The Presence Of Triglycerides: Kinetic And Modelling Study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Budi, Wiyarno (2012) A study on the ultrasonic oil extraction and in situ transestrification of microalgae biodiesel. Masters thesis, Universiti Malaysia Pahang.

C

C. K., Cheng and Chen, Loong Ong and Han, Jie Chan (2014) Synthesis And Characterization Of La-Co/MgO Catalyst For Methane Dry Reforming. In: Proceedings of the 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) In Conjuction with 21st Regional Synposium on Chemical Engineering (RSCE 2014), 29-30 October 2014 , Taylor's University Lakeside Campus, Subang Jaya. pp. 1-9..

C. K., Cheng (2010) Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol. In: CHEMECA 2010, 26 - 29 September 2010 , Hilton Adelaide, South Australia. pp. 1-11..

C. K., Cheng (2010) Steam Reforming Of Glycerol Over Alkali promoted Co-Ni/Al2o3 Catalysts. In: CHEMECA 2010, 26 - 29 September 2010 , Hilton Adelaide, South Australia. pp. 1-11..

C. K., Cheng (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, University of New South Wales .

C. K., Cheng and Chang, Ying Shi (2016) Strontium Cobalt Oxide Perovskite for Methane Dry Reforming. In: eProceedings of iCAT2016: International Conference on Catalysis, 20-21 September 2016 , Johor Bahru, Malaysia. . (In Press)

C. K., Cheng and Hajar, H. Hani and Ku Syahidah, Ku Ismail (2007) Production of Bioethanol from Oil Palm Empty Fruit Bunch. In: Proceedings of the International Conference On Sustainable Materials (ICoSM2007) , 9-11 June 2007 , Batu Ferringhi, Penang. pp. 69-72..

C. K., Cheng and Han, Jie Chan (2016) Potential of Empty Fruit Bunch Clinker as a Support for Nickel and Cobalt Catalysts in Methane Dry Reforming: Waste to Wealth Approach. Journal of the Taiwan Institute of Chemical Engineers, 62 . pp. 76-83. ISSN 1876-1070

C. K., Cheng and Jolius, Gimbun and Chin, Sim Yee (2012) Influence of Promoter Type on Bimetallic Co-Ni/Al 2O3 Catalyst for Steam Reforming of Glycerol. In: 6th International Conference on Environmental Catalysis (ICEC 2012), 12-15 September 2010 , Beijing, China. pp. 264-265..

C. K., Cheng and Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun (2014) Production of CO-rich Hydrogen Gas from Glycerol Dry Reforming Over La-promoted Ni/Al2O3 Catalyst. International Journal of Hydrogen Energy, 39 (13). pp. 6927-6936. ISSN 0360-3199

C. K., Cheng and Kim, Hoong Ng and Mohd Rizauddin, Deraman and Chun, How Ang and Soo, Kee Chong and Zi, Ying Kong and Maksudur, R. Khan (2014) Phototreatment of Palm Oil Mill Effluent (POME) over Cu/TiO2 Photocatalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 9 (2). pp. 121-127. ISSN 1978-2993

C. K., Cheng and Lim, Rwi Hau and Anabil, Ubil and Chin, Sim Yee and Jolius, Gimbun (2012) Hydrogen as Carbon Gasifying Agent During Glycerol Steam Reforming over Bimetallic Co-Ni Catalyst. Advances in Materials Physics and Chemistry, 2 (4). pp. 165-168. ISSN 2162-531X (print); 2162-5328 (online)

C. K., Cheng and Mohd Rizauddin, Deraman and Maksudur, R. Khan (2014) Evaluation of the Photocatalytic Degradation of Pre-Treated Palm Oil Mill Effluent (POME) Over Pt-Loaded Titania. Journal of Environmental Chemical Engineering . pp. 1-10. ISSN 2213-3437

C. K., Cheng and Mohd Rizauddin, Deraman and Ng, Kim Hoong and Maksudur, R. Khan (2016) Preparation of Titania Doped Argentum Photocatalyst and its Photoactivity Towards Palm Oil Mill Effluent Degradation. Journal of Cleaner Production, 112 (Prt. 1). pp. 1128-1135. ISSN 0959-6526 (print), 1879-1786 (online)

C. K., Cheng and Z. Y., Kong and Maksudur, R. Khan (2015) Photocatalytic-Fenton Degradation of Glycerol Solution over Visible Light-Responsive CuFe2O4. Water, Air and Soil Pollution, 226 (327). pp. 1-12. ISSN 0049-6979 (print); 1573-2932 (online)

C. K. M., Faizal and Mohib Reza, Kazimi and Iqbal, Ahmed (2011) A Short Review of Hydrophilic Surface Modification Methods for Low Density Poly Ethylene. In: International Conference on Chemical Innovation (ICCI 2011), 23-24 May 2011 , TATI University College. pp. 203-206..

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Bioconversion of Oil Palm Trunks Sap to Bioethanol by Different Strains and Co-Cultures at Different Temperatures. Journal of Medical and Bioengineering, 3 (4). pp. 297-300. ISSN 2301-3796

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Kinetic Parameters for Bioethanol Production from Oil Palm Trunk Juice. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 8 (4). pp. 328-330. ISSN 2010-3778

C. K. M., Faizal and Shareena, Mohd Sharif (2011) Application of Factorial Design Analysis to Control Bisphenol A MIP fabrication. In: Proceeding of International Conference Of Chemical Engineering And Industrial Biotechnology In Conjunction With 25th Symposium Of Malaysian Chemical Engineer (ICCEIB-Somche) 2011, 28 November - 1 December 2011 , Kuantan, Pahang. pp. 1-6..

C. K. M., Faizal and Shareena, Mohd Sharif (2012) Bisphenol A MIP Fabrication using the Application of Factorial Design Analysis. In: International Conference on Nanotechnology 2012, 30 May-1 June 2012 , Kuala Lumpur. pp. 1-12..

C. K. M., Faizal and Shareena, Mohd Sharif (2012) Influence of Factorial Design Analysis on the Performance of Bisphenol A Molecular Imprinted Polymer. International Journal of Chemical and Environmental Engineering, 3 (2). pp. 147-151. ISSN 2078-0737

Cadence Isis, Tay (2012) Characteristics of Biodiesel Produced From Palm Oil via Base Catalyzed Transesterification. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Chai, Seng Miao (2014) Study on bioethanol production by using oil palm trunk (opt) sap. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chan, Bun Hoo and Wong, Willy Xiu Fa and Chan, Geraldine Sue Ching and Chong, Fui Chin (2014) Natural Reduction of Graphene Oxide to Graphene Using Kaffir Lime Leaves Extract. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET2014), 10-11 November 2014 , Melaka. . (Unpublished)

Chan, Fong Shiew and Nurul, Shamsinar and Nurul Izwanie, Rasli and Syed Mohd Saufi, Tuan Chik (2015) Multiple Interactions Mixed Matrix Membrane Chromatography Using Anion and Cation Exchanger Resin for Whey Protein Fractionation. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 259-263. ISSN 0127-9696 (print); 2180-3722 (online)

Chan, Kar Min (2014) Nanostructured pt/mno2 catalysts and their performance for oxygen reduction reaction in air cathode microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chan, William (2014) Study on extraction and stability of natural red colorant from hibiscus sabdariffa l. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Changkari, Ravindran (2013) A study on food quality dimensions of 3 in 1 instant packet drink. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Charan Kanwal, Chitra Charan Suri (2012) Biodiesel production from rubber seed oil using activated clinker as catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Charlene Angela, J. N. Sundraraj (2009) A comparison between the production of biodiesel from waste cooking oil and refined-bleached-deodorized palm oil using ultrasonic transesterification with potassium hydroxide as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Che Hanisah, Yaacob (2012) Analysis of emulsion fuel spray characteristics using SAC and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Norrizuan, Che Abdul Rahim (2012) Esterification of oleic acid with ethanol catalysed by 12-tungstophosphoric acid supported on alumina. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Cheah, Zong Shen (2014) Life cycle analysis of palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chee, Wai Hoon and Jia, Han Lim and Huei, Ruey Ong and Maksudur, R. Khan (2015) Simultaneous Power Generation and Wastewater Treatment by Using AirCathode Single Chamber Microbial Fuel Cell. International Journal of Material Science Innovations (IJMSI), 3 (1). pp. 33-41. ISSN 2289-4063

Chee, Wai Woon and Huei, Ruey Ong and K. F., Chong and Maksudur, R. Khan (2015) MnO2/CNT as ORR Electrocatalyst in Air-Cathode Microbial Fuel Cells. Procedia Chemistry, 16 . pp. 640-647. ISSN 1876-6196

Chee, Wai Woon and Jia, Han Lim and Huei, Ruey Ong and Maksudur, R. Khan (2015) Simultaneous Power Generation and Wastewater Treatment by Using Air-Cathode Single Chamber Microbial Fuel Cell. International Journal of Material Science Innovations (IJMSI), 3 (1). pp. 33-41. ISSN 2289-4063

Chen, Chee Lek (2014) Production of mixed-matrix membrane (psf/zeolite) for co2 / n2 separation: screening study of polymer concentration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chen, Chee Lek and Sunarti, Abd Rahman (2015) Formulation of Mixed-Matrix Membrane (PSF/Zeolite) for CO2/N2 Separation: Screening of Polymer Concentration. Journal of Materials Science and Chemical Engineering, 3 (5). pp. 1-10. ISSN 2327-6045 (print); 2327-6053 (online)

Chen Sing, Winnie Lo (2012) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Cheng, Chin Kui (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, The University of New South Wales Sydney Australia.

Cheow, Yin San (2010) Bio-petrol synthesized from rubber seed oil extracted from rubber seeds through catalytic cracking using montmorillonite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chew, Jun Jian (2012) Comparison of microwave-assisted chemicals in demulsification of water-in-crude oil emulsions. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chew, Few Ne and Tan, Siang Wen and Boo, Chern Huey and Tey, Ti Beng (2012) Statistical Optimization of Green Fluorescent Protein Production from Escherichia coli BL21(DE3). Preparative Biochemistry and Biotechnology, 42 (6). pp. 535-550. ISSN 1082-6068

Chew Fern, Tan (2012) Characterization, demulsification and transportation of heavy crude oil via oil-in-water (o/w) emulsion. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Chi, Shein Hong and Sim, Yee Chin and Chin, Fui Cheng and Mohd Sabri, Mahmud and Gek, Kee Chua @ Yeo (2015) Kinetic Study of Enzymatic Oxidation On Glycerol with Immobilised Laccase/TEMPO System. In: Asian Congress on Biotechnology 2015 (ACB2015), 15-19 November 2015 , Kuala Lumpur. .

Chi, Shein Hong and S. Y., Chin and C. K., Cheng and Mohd Sabri, Mahmud and Chua, Gek Kee (2015) Enzymatic Conversion of Glycerol to Glyceric Acid with Immobilised Laccase in Na-Alginate Matrix. Procedia Chemistry, 16 . pp. 632-639. ISSN 1876-6196

Chieng, Tiew Hing (2014) Modelling of reactive distillation column by using mosaic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chin, Sim Yee and Ahmad, M. A. A. and M. R., Kamaruzaman and C. K., Cheng (2015) Kinetic Studies of the Esterification of Pure and Dilute Acrylic Acid with 2-ethyl Hexanol Catalysed by Amberlyst 15. Chemical Engineering Science, 129 . pp. 116-125. ISSN 0009-2509

Chin, Sim Yee and Anwaruddin, Hisyam and Haniif, Prasetiawan (2016) Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process. International Journal of Chemical Reactor Engineering, 14 (1). pp. 33-44. ISSN 2194-5748

Chin Weng, Foo (2013) Membrane Application in the Recovery of Gaharu Active Marker Compound from Water Mixture. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Kelvin Chee An (2009) Simulation of heterogeneosly catalysed esterification for biodiesel production using reactive distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Ee Rong (2014) Characterization of the ethanol-triglyceride transesterification reaction under counter current flow system. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Fui Chin and He, Yu Hai and Tuan Chik, Syed Mohd Saufi Purification of papain from unclarified papaya juice using reversed phase expanded bed adsorption chromatography (RP-EBAC). Journal of Industrial and Engineering Chemistry, 20 . pp. 4293-4297. ISSN 1226-086X

Chong, Soo Kee (2014) A study into the roles of cu/tio2 photocatalysts in the of methylene blue photodecomposition and water photo-splitting. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Soo Ling and Soh, Jiah Chee and C. K., Cheng (2016) Production of Ethylene from Ethanol Dehydration over H3PO4-Modified Cerium Oxide Catalyst. In: 3rd International Conference on Advanced Technology & Sciences (ICAT'16), 1-3 September 2016 , Konya, Turkey. pp. 1-10.. (Submitted)

Choo, Wei Chun and Nina Farhana, Mohd Jamaludin and N., Zainol (2015) Optimization Of Biogas Production From Poultry Manure Wastewater In 250 Ml Flasks. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 275-285. ISSN 0127-9696 (print); 2180-3722 (online)

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and M. D. H., Beg and Hegde, Gurumurthy and Gohari, Rasoul Jamshidi (2015) Polyvinyl Alcohol/polysaccharide Hydrogel Graft Materials for Arsenic and Heavy Metal Removal. New Journal of Chemistry, 39 (7). pp. 5823-5832. ISSN 1144-0546

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and M. D. H., Beg and Maksudur, R. Khan and Gohari, Rasoul Jamshidi and Muhammad Abdul Razis, Saidin and M. R., Islam and Ong, Huei Ruey (2016) Control of Biodegradability in a Natural Fibre based Nanocomposite as a Function of Impregnated Copper Nanoparticle. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Maksudur, R. Khan and M. D. H., Beg and Mohd Hafiz Dzarfan, Othman and Gohari, Rasoul Jamshidi and Moslehyani, Ali (2015) Physicochemical and Micromechanical Investigation of a Nanocopper Impregnated Fibre Reinforced Nanocomposite. RSC Advances, 5 (122). pp. 100943-100955. ISSN 2046-2069

Chowdhury, M. N. K. and M. D. H., Beg and Khan, Md. Ashikur Rahman and M. F., Fina (2013) Modification of Oil Palm Empty Fruit Bunch Fibers by Nanoparticle Impregnation and Alkali Treatment. Cellulose, 20 (3). pp. 1477-1490. ISSN 0969-0239

Chowdhury, M. N. K. and M. D. H., Beg and Maksudur, R. Khan (2013) Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite. Procedia Engineering, 68 . pp. 431-438. ISSN 1877-7058

Chowdhury, M. N. K. and M. D. H., Beg and Maksudur, R. Khan and Mina, M. F. (2012) Synthesis of Copper Nanoparticles and Their Antimicrobial Performances in Natural Fibres. Materials Letters, 98 . pp. 26-29. ISSN 0167-577X

Chowdhury, M. N. K. and M. F., Fina and Maksudur, R. Khan and M. D. H., Beg (2013) Cu Nanoparticles for Improving the Mechanical Performances of Oil Palm Empty Fruit Bunch Fibers as Analyzed by Weibull Model. Polymer Bulletin, 70 (11). pp. 3103-3113. ISSN 0170-0839(Print); 1436-2449(Online)

Chowdhury, M. N. K. and M. W., Khan and M. F., Fina and M. D. H., Beg and Maksudur, R. Khan and A. K. M. M., Alam (2012) Synthesis and Characterization of Radiation Grafted Films for Removal of Arsenic and Some Heavy Metals from Contaminated Water. Radiation Physics and Chemistry, 81 (10). pp. 1606-1611. ISSN 0969-806X

Chua, Share Kung (2008) Monitoring the quality of essential oil from etilingera SP.4 (Zingiberaceae) by gas chromatography-mass spectrometry (GC-MS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chua, Gek Kee (2016) Development of a Low Serum Medium for the Production of Monoclonal Antibody Against Congenital Adrenal Hyperplasia by Hybridoma Culture. Preparative Biochemistry and Biotechnology, 46 (7). pp. 679-685. ISSN 1082-6068

Chua, Gek Kee and Abdul-Rahman, Badarulhisam and Chisti, Yusuf (2013) Production and Scale-Up of a Monoclonal Antibody Against 17-Hydroxyprogesterone. Biotechnology Progress, 29 (1). pp. 154-164. ISSN 1520-6033

Chua, Gek Kee and Nur Anis, Saarani (2015) Screening and Optimising Metal Salt Concentration for Harvesting Nannochloropsis Sp. by Flocculation. Journal of Engineering and Technology, 6 (2). pp. 109-120. ISSN 2180-3811 (print); 2289-814X (online)

Chuah, T.G and Jolius, Gimbun and Choong, Thomas S.Y and A., Fakhru'l Razi and Barkawi, B.S (2003) Numerical Simulation of Three Way Catalytic Converter (TWCC) for No Abatement Under Transient Isothermal Condition. Investing in Innovation, 5 . pp. 295-298.

Cornelia, Chin Siew Ling (2012) Isolation and purification of penellic acid from Pinellia Ternata. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

D

Daeng Mohd Ashik, Bachok (2012) Dye removal by thin film composite (TFC) membrane produced through interfacial polymerization technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Damayanti, A. and Mohamed, Z. and Salim, M.R, and G., Olsson and Ahmad Ziad, Sulaiman (2009) Respirometric analysis of activated sludge models from palm oil mill effluent. Bioresource Technology . pp. 144-149.

Das, Sreejon and Abu, Yousuf and Maksudur, R. Khan and Iqbal, Salma Akhter and Md. Nasir, Uddin (2014) Assessment of Organic Acid-Rich Bio-Sap to Generate Electricity. International Journal of Sustainable Energy . pp. 1-11. ISSN 1478-6451 (print); 1478-646X (online)

Dashiny, Gopal (2009) Oil recovery from palm oil solid wastes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dayang Rafika Atiqah, Abang Othman (2009) Preliminary study on biohydrogen production from oleochemical waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Deirdre, James Damu (2010) The study of interchangeability of liquefied natural gas (LNG) with other fuels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Devarajan, Ramasamy (2015) Improvement of in cylinder airflow using dissimilar valve lift in a compresses natural gas bi-fuel engine. PhD thesis, Universiti Sains Malaysia.

Dewayanto, Nugroho and Ruzinah, Isha and Mohd Ridzuan, Nordin (2014) Kinetic Study on the Catalytic Pyrolysis of Decanter Cake from Palm Oil Milling Plant by using Thermogravimetry Data. Jurnal Teknologi, 69 (5). pp. 65-69. ISSN 2180-3722

Dewi Haryani, Sulaiman (2008) Extraction of patchouli oil using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dexter, Zick Donny (2010) Liquid-liquid equilibria for methanol-methyl oleate-water-oleic acid system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Dhiyatul Ridhwan, Md Nasarudin (2013) Potential evaluation oil palm frond juice for bioethanol fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dilaeleyana, Abu Bakar Sidik (2010) Comparison of microwave-assisted hydrodistillation with the conventional hydrodistillation method in extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dilah, Kadir (2008) Scale up of biopolymer from shake flask to 20l stirred tank fermenter. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ding, Gong Tao (2011) The optimisation and scale-up of microalgae cultivation for high level oil content for biodiesel. Masters thesis, Universiti Malaysia Pahang.

Ding, Gong Tao and Jailani, Salihon (2009) Modelling of Microalgae Growth and Oil Production by Using Sewage and Carbon Dioxide for Biodiesel. In: The Proceeding of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. .

Dinish, Thegaraju (2012) Investigation of biodiesel fuel properties with the dispersion of carbon nanotubes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Diyana, Ghazali (2010) A study of corrosion to the carbon steel in the present of carbon dioxide. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dominick, Gira (2015) Ethanol dry reforming over Ce-promoted NI/AI203 catalyst for H2. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dushendran, Bala Krisnain (2015) Analysis on the effect of different bracing types and layouts on lateral drift of 30-storey steel framed building subjected to lateral forces using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

E

E., Baranitharan and Maksudur, R. Khan and D. M. R., Prasad and Jailani, Salihon (2013) Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode. Water, Air and Soil Pollution , 224 (1533). pp. 1-11. ISSN 0049-6979 (print); 1573-2932 (online)

E., Baranitharan and Maksudur, R. Khan and D. M. R., Prasad and Jailani, Salihon (2013) Effects of Electrode Materials on Power Generation of Microbial Fuel Cell. In: 2nd International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB) 2013, 28-29 August 2013 , Zenith Hotel, Kuantan. pp. 1-6.. (Unpublished)

E., Baranitharan and Maksudur, R. Khan and D. M. R., Prasad and Wee, Fei Aaron Teo and Geok, Yuan Annie Tan and Rajan, Jose (2014) Effect of Biofilm Formation on the Performance of Microbial Fuel Cell for the Treatment of Palm Oil Mill Effluent. Bioprocess and Biosystems Engineering, 38 (1). pp. 15-24. ISSN 1615-7591 (print); 1615-7605 (online)

Edward, O. Akindoyo and Hayder A., Abdul Bari (2014) Polymer-Surfactants Physiochemical Interaction for Enhancing the Flow and Mechanical Characteristics of Polymeric Drag Reducing Agent. In: Proceedings of the 2nd International Conference on Green Technology & Ecosystem for Global Sustainable Development (ICGTec 2014), 24-25 November 2014 , Putrajaya. pp. 1-9..

Edward, O. Akindoyo and Hayder A., Abdul Bari and Ogunleye, Olaide Olaotan (2016) A New Synergistic Approach to Studying Drag Reduction of Rigid Polymer and Microbubbles in Turbulent Flow. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 428-436..

Egbal Hassan, Altoum Mohammed (2015) Methane production from sewage sludge treatment by ultrasonicated membrane anaerobic system (UMAS). Masters thesis, Universiti Malaysia Pahang.

Einayah, Kamaruzaman (2010) Effect of temperature on butanol and ethanol production from palm oil mill effluents by clostidium acetobutylicum. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

El-Hadad, Omar and Siti Nuda Shafinie, Abdul Aziz (2014) A New Solar Technology Technique for Wastewater and Seawater Treatment. In: conference Asia Water 2014, 19 - 21 March 2014 , Kuala Lumpur Convention Centre, Malaysia. pp. 1-11., 597. ISSN 09215093 (Unpublished)

Elfira, Anuar (2014) Ultrasonic enzymatic mediated extraction of eurycoma longifolia (tongkat ali) for cosmeceutical and nutraceutical applications. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Elizabeth, Hendroff (2015) Production of fuel grade bio oil and fuel gas from catalytic plastic pyrolysis : effect of temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ellie Fazlin, Mohd Sarian (2010) Effect of substrate concentration and agitation rate on butanol production from POME by Clostridium beijerinckii. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang .

Ema Farima, Rustam Ali Khan (2012) Making an eco friendly board by using lignin- soy based natural adhesive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Emsalem, Faraj Hawege (2016) Performance investigation of water-soluble additives for drag reduction agent in pipelines. PhD thesis, Universiti Malaysia Pahang.

Emy Syafinas, Hamid @ Osman (2006) Protein fractionation using ultrafiltration system for differents module configurations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Emyra Ezzaty, Masiren and Noorlisa, Harun and W. H. W., Ibrahim and Fatmawati, Adam (2016) Effect of Temperature on Diffusivity of Monoethanolamine (MEA) on Absorption Process for CO2 Capture. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 43-51. ISSN 2289-697X

Emyra Ezzaty, Masiren and Noorlisa, Harun and W. H. W., Ibrahim and Fatmawati, Adam (2014) The Effect of Temperature on Intermolecular Interaction of Monoethanolamine Absorption Process for CO2 Removal. International Journal of Chemical and Environmental Engineering, 5 (5). pp. 297-300. ISSN 2078-0737

Engku Nadia, Engku Mat Nasir (2014) Solid phase transformation of carbamazepine-succinic co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Eramamnazruasyadi, Mat Rajab (2010) Optimal of mixed refrigerant composition for mrc-lng system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Erna Qurratu' Aini, Ruslan (2011) Study on extraction of pandan flavor from pandan leaves using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Erna Wati, Hajar (2013) Identification and characterization of stevia rebaudiana extraction for total phenolic compound using soxhlet extraction and microwave-assisted extraction techniques. Masters thesis, Universiti Malaysia Pahang.

Ernie Zayani, Kamaruzaman (2015) Biological production of methanol by using pectin methylesterase (PME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Essam, A. Makky and Jee, Jian Ong and Karim, Md. Rezaul and Lee, Chin Mei (2013) Production and Optimization of L-asparaginase by Bacillus sp. KK2S4 From Corn Cob. African Journal of Biotechnology, 12 (19). pp. 2654-2658. ISSN 1684-5315

Essam, A. Makky and Mohd Rasdi, S. H. and Al-Dabbagh, Jinan B. and Najmuldeen, Ghazi Faisal (2013) Microbial Utilization Of Waste for Nanoparticles Production. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Essam, A. Makky and Siti H., Mohd Rasdi and Al-Dabbagh, Jinan B. and Ghazi Faisal, Najmuldeen and Mohd Hasbi, Ab. Rahim (2014) Bioremediation of Hazardous Waste for Silver Nanoparticles Production. International Journal of Current Microbiology and Applied Sciences (IJCMAS), 3 (12). pp. 364-371. ISSN 2319-7706

Eugene Hien Yoong, Ng (2013) Dynamic Simulation of Bulk Polymerisation of Styrene Using ODE Solver Within Matlab Software. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ezani, Zahari (2010) A new non regenerative gas absorbant catalyst for FCC unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

F

Fadilah, Mohamed (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using watermelon rind waste for biocomposite application. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Fadzilah, Abdul Latif (2013) Humic acid removal by polyester nanofiltaration (NF) membrane synthesized from triethanolamine (TEOA) monomer. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Faezah, Bakar (2013) Modelling and simulation of fermentation product purification using batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fairul Idzwan, Mohd (2008) Comparison of agarwood essential oil & water soluble (hydrosol). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fakhirah, Ahmad Basri (2014) Stripper simulation for co2 removal from natural gas processing plant using amine absorption process. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faradila, Naim and Rawaida, Jaafar and Nurul Wahidah, Arshad and Rosyati, Hamid and Mohd Najib, Razali (2013) Unclean Hand Detection Machine using Vision Sensor. In: Electronics, Communications and Photonics Conference (SIECPC), 2013 Saudi International, 27-30 April 2013 , Riyadh. pp. 1-4..

Faradila, Rozali (2008) The formulation of emulsions in biodiesel production : emulsion stability and demulsification via micromave heating. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Farah Amira, Mohd Ghazali (2013) The effects of recycled polypropylene mixing ratio on the tensile strength of polypropylene. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Farah Fadhilah, Fahrur Razi (2014) Bioethanol production by baker's yeast in opts - effect of temperature and ph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Fatihah, Mohd Azhari (2013) A Simulation Study on Model Predictive Control Application for Depropanizer Using Aspen Hysys. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Syahirah, Yahya (2015) Development of operator training simulator using aspen simulation workbook (ASW): a reactor case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farahani, Sarajuddin (2015) Hydrogen production via glycerol dry reforming over nickel catalyst supported on sio2 and Al2O3 modified by La. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farhan, M. Said and Shobana, Sinniah (2015) Antioxidant Activity of Monascus sp. Fermented With Morinda citrifolia. In: Asian Congress on Biotechnology 2015 (ACB2015), 15-19 November 2015 , Kuala Lumpur. . (Unpublished)

Farhan, Mohd Said (2015) Development of Simvastatin Production by Monascus Purpureus In Solid-State Fermentation Using Agricultural Product. Journal of Engineering and Technology, 6 (2). pp. 18-28. ISSN 2180-3811

Farhan, Mohd Said and Brooks, John and Chisti, Yusuf (2014) Optimal C:N Ratio for the Production of Red Pigments by Monascus Ruber. World Journal of Microbiology and Biotechnology, 30 (9). pp. 2471-2479. ISSN 0959-3993

Farhanah, Amanulla Khan (2013) Fermentative Production of Butanol From Oil Palm Trunk (OPT) Sap Using Clostridium Acetobutylicum and Clostridium Beijerinckii. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farhani, Faisal (2009) Protein purification using zeolite adsorbent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farisah, Abdul Aziz (2010) Biodegradation behavior of bacterial cellulose fiber reinforces with starch/chitosan biocomposite. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Farizah, Hamid (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using sawdust as a substrate. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Faseha, Jamali (2010) Simulation of biodiesel production through heterogeneously catalysed transesterification of vegetable oil by calcium ethoxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fathimah, Abdul Halim and M. S., Najib and Kamarul Hawari, Ghazali and Muhamad Faruqi, Zahari and Abd. Aziz, Mohd Azoddein (2016) Classification of Ammonia Odor-profile Using k-NN Technique. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (9). pp. 42-46. ISSN 2462-2303

Fatihah Hayati, Abdul Sani (2010) Qualitative and quantitative analysis of natural colorants from banana bracts. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Fatimah Azzahra, Misebah (2012) Effect of inoculums concentration, temperature and agitation rate on solvent production from palm oil mill effluent (POME) by Clostridium Beijerinckii ATCC 51743. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Fatin Azureen, Zulkurnain (2014) Effect of temperature on kinetics of bulk polymerization of methyl acrylate. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Melinna, Abd Jalil (2014) The optimum condition to enhance degradation of organic matter in palm oil mill effluent (pome) using bio media bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadhirah, Mahazan (2013) Formulation, characterization, and optimation of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadia, Pauzi (2015) Adsorption of methylene blue from aquoues solution by using imprata cylindrica waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Syazwana, Hashim and H. W., Yussof and Mior Ahmad Khushairi, Mohd Zahari and Rosli Md, Illias and R. A., Rahman (2016) A Factorial Analysis Study on Enzymatic Hydrolysis of Fiber Pressed Oil Palm Frond for Bioethanol Production. In: IOP Conference Series: Earth and Environmental Science, International Conference on Advances in Renewable Energy and Technologies (ICARET 2016), 23-25 February 2016 , Putrajaya, Malaysia. pp. 1-6., 32 (012071). ISSN 1755-1307 (Print); 1755-1315 (Online)

Fatin ‘Atikah, Abd. Manan (2013) Exploring of the Transesterification of Castor Oil to Produce Biodiesel Using Quicklime as a Basic Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatinnurhazwani, Zainal (2013) Effect of Ultrasound on Enzymatic Extraction of Zingiber Officinale. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Fatmawati, Adam (2012) Molecular Recognition of 2,6-Dihydroxybenzoic Acid Polymorph In Ethanol, Methanol and P-Xylene Solution. In: The 2nd International Conference On Computation For Science And Technology, 9-11 July 2012 , Nigde,Turkey. .

Fatmawati, Adam and Saiful Nizam, Tajuddin and Joharizal, Johari and Mashitah, M. Y. (2014) Rahsia dan Keunikan Gaharu. Universiti Malaysia Pahang, Pahang, Malaysia. ISBN 9789670120447

Fatmawati, Adam and Siti Hana, A. B. and Mashitah, M. Y. and Saiful Nizam, Tajuddin (2014) Molecular Dynamic Simulation of the Patchouli Oil Extraction Process. Journal of Chemical & Engineering Data, 59 (2). pp. 183-188. ISSN 0021-9568

Fatmawati, Adam and Siti Hana, A. B. and Saiful Nizam, Tajuddin and Mashitah, M. Y. (2016) Solvent Role in Molecular Recognition of Patchouli Extraction Process. Asian Journal of Chemistry , 28 (6). pp. 1253-1257. ISSN 1253-1257

Fauziah, Hairan (2008) Treatment of POME via chitosan based flocculation : a study on the degree of deacetylation of chitosan. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Fauziah Shaheen, Sheh Rahman (2010) Biodegradable biocomposite starch based films blended with chitosan and whey protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fayaz, Fahim and Ahmad Ziad, Sulaiman and Sharanjit, Singh and Akbari, Sweeta (2016) Influence of CO2 Partial Pressure on Ethanol Dry Reforming Using 5%Ce-10%Co/Al2O3 Catalyst for Hydrogen Production. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 712-716..

Fayaz, Fahim and Danh, Huong T. and Nguyen-Huy, Chinh and Vu, Khanh B. and Bawadi, Abdullah and Vo, Dai-Viet N. (2016) Promotional Effect of Ce-dopant on Al2O3-supported Co Catalysts for Syngas Production via CO2 Reforming of Ethanol. Procedia Engineering, 148 . pp. 646-653. ISSN 1877-7058

Fazerah, Moen (2015) Effect of rotation speed and temperature to wax deposition for Malaysian crude oil. Project Paper (Bachelors of Chemical Engineering) -- Universiti Malaysia Pahang – 2015, Universiti Malaysia Pahang.

Faznurfariza Firdaus, Nicholas (2012) Extraction of glycolic acid from natural sources. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Fazrul Amar, Ishak (2008) Development on pre-heating system for autothermal reformer for fuel cell application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ferdous, Kaniz and Uddin, M. Rakib and Islam, Rehnuma and Maksudur, R. Khan and Islam, M. A. (2012) Potentiality of Biodiesel Production From Non-Edible Oil: Bangladesh Perspective. Journal of Chemical Engineering, 27 (2). pp. 1-5. ISSN 2221-7436

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Maksudur, R. Khan and Islam, M. A. (2013) Preparation and Optimization of Biodiesel Production from Mixed Feedstock Oil. Chemical Engineering and Science, 1 (4). pp. 62-66. ISSN 2328-7381

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Maksudur, R. Khan and M. A., Islam (2012) Optimization of Three-Step Method For Biodiesel Production From Waste Cook Oil. Journal of Chemical Engineering, 27 (2). pp. 6-10. ISSN 2221-7436

Fidelia Sawai, anak Michael Mulok (2009) Protein purification by using immobilized metal ion affinity (IMA) adsorbent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fiona Ling, Wang Ming and Hayder A., Abdul Bari and Noraishah, Abdul Latip and Somaye, Heidarinik (2015) Insoluble Nano-powders Additives Enhancing the Flow of Liquid in Microchannel: Effect of Particle Size. In: The International Conference On Fluids And Chemical Engineering(FLUIDSCHE 2015), 24-26 Nov 2015 , Langkawi, Kedah. . (Unpublished)

Florina, Geduin (2008) Up-scale study on ultrasonically assisted of biodiesel production from waste cooking oil (WCO). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fong Fong, Kiew (2015) Copper removal using ion exchanger flat sheet mixed matrix membrane : effect of polyethersulfone composition on membrane properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Foo, Chee Yew (2010) Hybrid membranes for separate hydrogen sulfide(H2S) gas from refinery wastewater treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Foo, Jia Huoy (2014) Synthesis of biolubricant by esterification of oleic acid and pelargonic acid with trimethylolpropane over tin(ii) oxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

G

G., Ponnarasy and Maksudur, R. Khan and Mohd Sabri, Mahmud and Kalam, Md. Abul (2014) Light Induced Esterification of Oleic Acid Catalyzed by Pseudomonas Cepacia Lipase. International Journal of Environmental Science and Development, 5 (4). pp. 344-346. ISSN 2010-0264

Gaanty Pragas, Maniam and Boey, Peng Lim and Ganesan, Shangeetha (2011) Regeneration and Reutilization of Oil Laden Spent Bleaching Clay via In-Situ Transesterification and Calcinations. Journal of the American Oil Chemists' Society, 88 (Issue ). pp. 1247-1253. ISSN 0003-021X (Print), 1558-9331 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Muhammad Idiris, Saleh and Norzahir, Sapawe and Shangeetha, Ganesan and Mohamed Hag Ali, Dafaalla (2011) Pyrolysis of Residual Palm Oil in Spent Bleaching Clay by Modified Tubular Furnace and Analysis of the Products by GC-��MS. Journal of Analytical and Applied Pyrolysis, 91 (Issue ). pp. 199-204. ISSN 0165-2370

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Biodiesel Production Via Transesterification of Palm Olein Using Waste Mud Crab (Scylla serrata) Shell as a Heterogeneous Catalyst. Bioresource Technology, 100 (Issue ). pp. 6362-6368. ISSN 0960-8524 (Print), 1873-2976 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Biodiesel from Adsorbed Waste Oil on Spent Bleaching Clay using CaO as a Heterogeneous Catalyst. European Journal of Scientific Research, 33 (2). pp. 347-357. ISSN ISSN 1450-216X

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Utilization of Waste Crab Shell (Scylla serrata) as a Catalyst in Palm Olein Transesterification. Journal of Oleo Science, 58 . pp. 499-502. ISSN 1347-3352 (Print), 1347-3352 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid and Mohamed Hag Ali, Dafaalla (2012) Crab and Cockle Shells as Catalysts for the Preparation of Methyl Esters from Low Free Fatty Acid Chicken Fat. Journal of the American Oil Chemists' Society, 88 (Issue ). pp. 283-288. ISSN 0003-021X (Print), 1558-9331 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan (2011) Ultrasound Aided in Situ Transesterification of Crude Palm Oil Adsorbed on Spent Bleaching Clay. Energy Conversion and Management, 52 (Issue ). pp. 2081-2084. ISSN 0196-8904

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Sze-Xooi, Lim and Sau-Lai, Lim and Melati, Khairuddean (2011) Utilization of BA (boiler ash) as Catalyst for Transesterification of Palm Olein. Energy, 36 (Issue ). 5791 -5796. ISSN 0360-5442 (Print), 1873-6785 (Online)

Gaanty Pragas, Maniam and Peng Lim, Boey and Shafida, Abd Hamid (2011) Performance of Calcium Oxide as a Heterogeneous Catalyst in Biodiesel Production: A Review. Chemical Engineering Journal, 168 (Issue ). pp. 15-22. ISSN 1385-8947

Gaanty Pragas, Maniam and Shangeetha, Ganesan and Boey, Peng Lim and Melati, Khairuddean and Sau-Lai, Lim (2012) A New Catalyst System in Transesterification of Palm Olein: Tolerance of Water and Free Fatty Acids. Energy Conversion and Management, 56 . pp. 46-52. ISSN 0196-8904

Gaanty Pragas, Maniam and Irma, Nurfitri and Noor, Hindryawati and Mashitah, M. Y. and Shangeetha, Ganesan (2013) Potential of Feedstock and Catalysts from Waste in Biodiesel Preparation: A Review. Energy Conversion and Management, 74 . pp. 395-402. ISSN 0196-8904

Gaase, Poarasy (2010) Isolation of albumin protein from goat�s milk using anion exchange chromatography. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gan, Gek Hian (2015) Performance analysis of a downdraft and fluidized bed biomass gasification using thermodynamic equilibrium model. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gan, Gek Hian and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2016) A Generic Thermodynamic Equilibrium Model-Based Framework For Biomass Gasification Processes. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2222-2229. ISSN 1819-6608

Geraldine, Chan Sue Ching and Willy, Wong Xiu Fa and Chong, Fui Chin (2014) Immobilization of Hepatitis B Antibody Onto the Reduced Graphene Oxide. In: 4th Johor Biotechnology Conference & Exhibition (BIO JOHOR 2014), 25-27 August 2014 , Johor Bharu. . (Unpublished)

Geraldine, Chan Sue Ching (2016) Development of a graphene based immuno-biosensor for hepatitis b virus surface antigen detection. Masters thesis, Universiti Malaysia Pahang.

Giacomo, Francesco Di and Azhar, Fakharuddin and Rajan, Jose and Brown, Thomas M. (2016) Progress, Challenges and Perspectives in Flexible Perovskite Solar Cells. Energy and Environmental Science, 9 . pp. 3007-3035. ISSN 1754-5692 (Print); 1754-5706 (Online)

Gindalan, Emma Olga Taimin (2010) Newton loop method in gas pipeline network. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Goh Mun, Chun (2013) Study on Optimum Condition of Empty Fruit Bunch-Graft-Poly (Acrylamide) Superabsorbent Polymer Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Govindasamy, Inba Malar (2012) Improving the water flow in pipelines using floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Rajan, Jose and Mohammed, Nasir and Anuj, Kumar (2013) Synthesis and Characterization of Carbon Fibers and their Application in Wood Composites. BioResources, 8 (3). pp. 4171-4184. ISSN 1930-2126 (print); 1930-2126 (online)

Gupta, Arun and Anuj, Kumar and Viswanathan Sharma , Korada (2014) Thermal and Mechanical Properties of Ureaformaldehyde (UF) Resin Combined with Multiwalled Carbon Nanotubes (MWCNT) as Nanofiller and Fiberboards Prepared by UF-MWCNT. Holzforschung = International Journal of the Biology, Chemistry, Physics, and Technology of Wood . pp. 1-7. ISSN 1437-434X

Gupta, Arun and Kumar, Anuj and Sharma, K. V. and Gupta, Ritu (2016) Application of High Conductive Nanoparticles to Enhance Thermal and Mechanical Properties of Wood Composite. In: International Conference On Advanced Materials and Applications, 15-17 Jun 2016 , BMS college of Engineering, India. . (Unpublished)

Gupta, Arun and Tanveer, Ahmad Khan and Saidatul Shima, Jamari and Rajan, Jose (2015) Examination of Selected Synthesis Parameters for Composite Adhesive-type Urea-Formaldehyde/activated Carbon Adhesives. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X

Gupta, Riru and Norrozila, Sulaiman and M. D. H., Beg and Gupta, Arun (2012) An Enhanced Model for Prediction of Young Modulus of Composite. Procedia Technology, 1 . pp. 303-307. ISSN 2212-0173

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun (2013) An Improved Algorithm for Prediction of Young's Modulus of Wood Plastic Composites. Scientific Research and Essay , 8 (16). pp. 649-656. ISSN 1992-2248

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun and M. D. H., Beg (2014) WPC Soft: Prototype Simulation Software to Predict the Internal Changes During Hot Pressing Q1 of Wood Plastic Composites. Chemical Product and Process Modeling . pp. 1-13.

H

Habeeb, O. A. and K., Ramesh and Ali, Gomaa A. M. and M. Y. M., Yunus and Thanusha, T. K. and Olalere, O. A. (2016) Modeling and Optimization For H2s Adsorption From Astewater Using Coconut Shell Based Activated Carbon. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 136-147. ISSN 1991-8178

Habeeb, Omar Abed and K., Ramesh and M. Y., Rosli and Ahmad, Mani Malam and Abayomi, Olalere Olusegun (2016) Experimental Study of the Effect of PH on the Adsorption Capacity of H2S from Waste Water by Using Calcination of Eggshell as an Adsorbent. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 338-342..

Haitham Mohammed, Ali Al-Abee (2013) In situ Transesterification of Biodiesel For Possible Biodiesel Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajar Athirah, Mohd Sukri (2013) Reduction of Cd(II), Ag(II) AND Cu(II) Using Rubber Seed Shell : Adsorption Isotherm and Kinetics. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hamidah, Abdullah and Maksudur, R. Khan and Manoj, Pudukudya and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2015) CeO2-TiO2 as a Visible Light Active Catalyst for the Photoreduction of CO2 to Methanol. Journal of Rare Earths, 33 (11). pp. 1155-1161. ISSN 1002-0721

Hamidah, Abdullah and Syarifah, Abd Rahim and Zahira, Yaakob and Maksudur, R. Khan and Nur Aminatulmimi, Ismail (2015) Characterization and Photocatalytic Activity of CeO2-TiO2 for Photoreduction of CO2 to Methanol under Visible Light. In: 28th Symposium Of Malaysian Chemical Engineers (SOMCHE) 2015, 20-22 Oct 2015 , Putrajaya. . (Unpublished)

Han Jie, Chan (2015) Synthesis and characterization of EFB clinker supported nickel and cobalt catalysts for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hana, Marican and Raihana Z., Edros and Mahadi, Mohammad and Sazlina, Salleh (2016) Antimicrobial Activity of Tropical Soft Corals Found in the Northern Straits of Malacca. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 1-10. ISSN 2289-697X

HaniShazwani, Mohd Suhaimi (2012) Study on adsorption parameter to remove zinc from spent ipa using activated carbon. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hanis Farzana, Mohd Sadek (2010) Comparison of microwave-assissted hydrodistillation with the conventional hydrodistillation method in the extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hartini, Hamzah (2012) Study of hybrid induction heating in distillation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hasany, S. F. and N. H., Abdurahman and Sunarti, Abd Rahman (2016) Wet Chemical Approach for Vanadium Doped Maghemite (Fe2-xVxO3) Nanocrystals. Current Nanoscience, 12 (5). pp. 617-620. ISSN 1573-4137 (Print); 1875-6786 (Online)

Hasany, Syed Farhan and N. H., Abdurahman and Kumar, Anuj and Sunarti, Abd Rahman (2013) Facile Fabrication of y-Fe2O3 Embedded Nanocomposite of Multiwalled Carbon Nanotubes (MWCNTs). In: 3rd Nano Today Conference, 8-11 December 2013 , Singapore. p. 1.. (Unpublished)

Hassanal, Haris (2012) The study of mass and heat transfer on shell and tube heat exchanger. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hau, Ong Boon (2010) Thermodynamic analysis of absorption refrigeration system (ARS). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hayder A., Abdul Bari and Abd Al-Rubai, Rana Thabet (2008) Influence of Rayleigh Number in Turbulent and Laminar Region in Parallel-Plate Vertical Channels. Asian Journal of Applied Sciences, 1 (4). pp. 265-285. ISSN 1996-3343

Hayder A., Abdul Bari and Kwaire, Asawer A. and Falih, Hussain M. (2009) Modelling of Three Phase System with Non-Newtonian Liquid Using Computational Fluid Dynamics Model. Asian Journal of Industrial Engineering, 1 (1). pp. 12-20. ISSN 1996-3386

Hayder A., Abdul Bari and M, K., Nizam (2009) The Use Of Vegetable Oil In Lubricant As Base Oil: a Review. In: The Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 123-127..

Hayder A., Abdul Bari (2009) Gris sisa buangan mempunyai potensi dikomersialkan. CREATE . p. 22. ISSN 1823-7487

Hayder A., Abdul Bari (2009) Research higlights formulation of high performance, multipurpose grease using gypsum from titanium dioxide manufacturing waste. Quest, 5 (2). p. 12. ISSN 1985-8159

Hayder A., Abdul Bari and Ainoon, Shabirin and N. H., Abdurahman (2014) Bio-polymers for Improving Liquid Flow in Pipelines - A Review and Future Work Opportunities. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1157-1170. ISSN 1226-086X

Hayder A., Abdul Bari and Akindoyo, Edward Oluwasoga (2015) Drag Reduction Efficacy of CTABr and Nanosilica Particles Using Rotating Disk Apparatus (RDA). Australian Journal of Basic and Applied Sciences, 9 (8). pp. 136-144. ISSN 1991-8178

Hayder A., Abdul Bari and Akindoyo, Edward Oluwasoga and Zainab, Yousif (2015) A Dual Mechanism of the Drag Reduction by Rigid Polymers and Cationic Surfactant: Complex and Nanofluids of Xanthan Gum and Hexadecyl Trimethyl Ammonium Chloride. International Journal of Research in Engineering and Technology (IJRET), 4 (2). pp. 84-93. ISSN 2321-7308 (print); 2319-1163 (online)

Hayder A., Abdul Bari and Basheer, Esmail Abdullah Mohammed and Ainoon, Shabirin and Wafaa, Kamil Mahmood (2015) Investigating the Degradation Resistance Improvement of Polymer Surfactant Complex Drag Reducing Agent. Applied Mechanics and Materials, 789-90 . pp. 7-14. ISSN 1662-7482

Hayder A., Abdul Bari and Faraj, Emsalem (2015) Studying the Interaction between a New Mixture in Enhancing Drag Reduction Efficiency. International Journal of Chemical Engineering and Applications (IJCEA), 6 (4). pp. 277-280. ISSN 2010-0221

Hayder A., Abdul Bari and Faraj, Emsalem and Jolius, Gimbun and Mahmood, Wafaa K. (2015) Energy Dissipation Reduction Using Similarly-Charged Polymer-Surfactant Complex. Advances and Applications in Fluid Mechanics, 18 (1). pp. 113-128. ISSN 0973-4686

Hayder A., Abdul Bari and Fiona Ling, Wang Ming (2015) Drag Reduction Properties of Nanofluids in Microchannels. The Journal of Engineering Research (TJER), 12 (2). pp. 60-67. ISSN 1726-6009 (print); 1726-6742(online)

Hayder A., Abdul Bari and Fiona Ling, Wang Ming (2016) Liquid Flow Enhancement using Natural Polymeric Additives: Effect of Concentration. In: 9th International Conference on Thermal Engineering: Theory and Application, 24-26 March 2016 , Abu Dhabi, UAE. pp. 1-3.. ISSN 1051-8215

Hayder A., Abdul Bari and Hassan D., Mahammed and Zulkefli, Yaacob and Wafaa, Kamil Mahmood (2016) Wall-Pressure Fluctuations of Modified Turbulent Boundary Layer with Riblets. International Journal of Mechanical & Mechatronics Engineering, 16 (1). pp. 23-34. ISSN 2077-124X (Online); 2227-2771 (Print)

Hayder A., Abdul Bari and Hassan D., Mahammed and Zulkefli B. Y., Hassan (2015) Bio-Inspired Passive Drag Reduction Techniques: A Review. ChemBioEng Reviews, 2 (3). pp. 185-203. ISSN 2196-9744

Hayder A., Abdul Bari and Hawege, Emsalem (2015) Polymer-Surfactant Complex for Enhancing the Mechanical and Drag Reduction Performances of a Turbulent Flow. Australian Journal of Basic and Applied Sciences, 9 (8). pp. 1-6. ISSN 1991-8178

Hayder A., Abdul Bari and M. Y., Rosli and Ashwin Charles, Benedict (2014) Flexible Turbulence Absorbers for Enhancing the Liquid Flow in Pipelines. In: Proceedings of the 12th International Conference on Nanochannels, Microchannels, and Minichannels, 3-7 August 2014 , Chicago, Illinois. pp. 1-8..

Hayder A., Abdul Bari and M. Y., Rosli and Ashwin Charles, Benedict (2014) Novel Turbulence Absorption Technique for Enhancing the Liquids Flow in Pipelines. In: Proceedings of the International Conference on Heat Transfer and Fluid Flow, 11-12 August 2014 , Prague, Czech Republic. pp. 34-1..

Hayder A., Abdul Bari and M. Y., Rosli and M. A., Ahmad (2009) Studying the Effect Addition of Okra-Natural Mucilage as Drag Reducing Agent in Different Size of Pipes in Turbulent Water Flowing System. In: The Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 128-133..

Hayder A., Abdul Bari and Rosli, Mohd. Yunus and A., Charles (2015) A Turbulence-altering Pseudo-surface (TAPS) for Enhancing the Flow in Pipes. Chemical Engineering Communications .

Haziatun, Mohd Fazi (2012) Biodelignification of oil palm trunk- optimization. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazlan, Haris (2006) Treatment of palm oil effluent (POME) using membrane bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazlina, Faizal (2016) UMP jalin persefahaman dengan Micromidas Inc. UMP News . (Unpublished)

Hazlinda, Sapee (2012) Optimal design of inter-plant water network with centralized regeneration system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazman, Abd Mulok (2010) Whey protein fractionation based on sp-sepharose cation exchange chromatography. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hazrin, Azemi (2008) Monitoring of quality of essential oil from Etlingera SP. 2 (Zingiberaceae) by GC and GC-MS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazrina, Abdul Halim (2015) Pretreatment of palm oil waste via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwan Aizat, Mohamed Hussin (2008) Study of cryogenic machining for single tip cutting tooll using new cooling system design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwani, A Hazah (2012) Fabrication of nf membrane using phase inversion method for dye removal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazwani, Sidik (2012) Prediction of grinding machanability when grinds Haynes 242 using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwani, Zulkiply (2012) Optimization of extraction parameters of total phenolic compound from Cosmos caudatus. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hazwani, Omar (2014) Xylose production from oil palm frond (opf). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwani, Sidek Haron (2014) Enzymatic extraction of ficus deltoidea for better enhancement of extracted yield. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

He, Yu Hai and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound and Enzyme on The Extraction of Eurycoma Longifolia (Tongkat Ali). In: International Conference on Chemical Science and Engineering (ICCSE 2015), 21-22 Apr 2015 , Istanbul, Turkey. . (Unpublished)

He, Yuhai and Syed Mohd Saufi, Tuan Chik and Fui Chin, FuChongi Chin (2014) Application of Adsorption Chromatography in the Papain Processing. GSTF Journal of Chemical Sciences (JChem), 1 (2). pp. 9-15. ISSN 2339-5060 (print); 2339-5079 (online)

Helmy Muhamad, Khairi (2012) Study on bonding and chemical properties of coastal plastics waste. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Heng, Cheng Liang (2014) Study on the corrosion of carbon steel pipe upon different type of soils. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hernawati, Lahading (2011) Development of chitosan based adsorbent for the removal of residual oil from palm oil mill effluent (POME). Masters thesis, Universiti Malaysia Pahang .

Hesami, Majid and Gupta, Arun and Jaafar, Abdullah and Avazpour, Mahrokh (2015) Effect of Electron Radiations on the Physical Properties of Laminated Particle Boards. Asian Journal of Applied Sciences, 3 (2). pp. 324-331. ISSN 2321–0893

Hesham, H.A. Rassem and N. H., Abdurahman (2015) Synthesis, Characterization and Chromogenic Properties of 4-Hydroxy-(2-Hydroxybenzylidene) Benzohydrazide. International Journal of Engineering Sciences & Research Technology , 4 (7). pp. 1036-1042. ISSN 2277-9655

Hesham, H.A. Rassem and N. H., Abdurahman (2015) Synthesis, Characterization and Chromogenic Properties of Lead (II) Complexes Containing Hydrazonic Ligands. Australian Journal of Basic and Applied Sciences, 9 (31). pp. 90-102. ISSN 1991-8178

Hie Lian, Hii (2015) Synthesis and charaterization of polyamide (PA) forward osmosis membrane. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hisyam, A. and Ismail, N. A. and Mohd Taib, M. K. A. and Shariff, S. (2016) Leaching Study Of Precious Metal Recovery From Ferric Permanent Magnet Waste. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9981-9984. ISSN 1819-6608

Hong, Yuen Fatt (2012) Synthesis and swelling behaviour of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hong, Chi Shein (2016) Production of mesoxalic acid from glycerol oxidation by laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (LACASSE/TEMPO) system : effect of process parameters and kinetic study. Masters thesis, Universiti Malaysia Pahang.

Hong, Siau Huey (2008) Enzymatic-enhanced production of gaharu oil : effects of enzyme loading and duration time. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hoo, Seng Tatt (2010) Demulsification of water-in-crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hoo, Zi Hao (2015) Study on the concrete beam depth reduction using steel fibre under flexural load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hor, Chee Heng and Chew, Few Ne (2016) Determination of Green Fluorescent Protein by Ultraviolet-Excited Gel Imaging. Instrumentation Science and Technology, 44 (5). pp. 558-565. ISSN 1525-6030

Hossain, M. Anwar and Ayodele, Bamidele V. and C. K., Cheng and Maksudur, R. Khan (2016) Artificial Neural Network Modeling of Hydrogen-rich Syngas Production from Methane Dry Reforming over Novel Ni/CaFe2O4 Catalysts. International Journal of Hydrogen Energy, 41 (26). pp. 11119-11130. ISSN 0360-3199

Hossain, M. Anwar and Ayodele, Bamidele V. and C. K., Cheng and Maksudur, R. Khan (2016) Syngas Production from Methane Dry Reforming Over 15wt%Ni/85wt%CaFe2O4 Catalyst. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 147-156..

How, Liew Futt (2013) Production of biodiesel from palm oil through heterogeneous catalysis using calcined eggshell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hua, Chyn Lee and Jolius, Gimbun and Suzana, Yusup and C. K., Cheng (2013) Bio-syngas Production from Glycerol Dry Reforming over Cement Clinker-supported Nickel Catalyst. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Hua, Chyn Lee and Kah, Weng Siew and Jolius, Gimbun and C. K., Cheng (2013) Application of Cement Clinker as Ni-Catalyst Support for Glycerol Dry Reforming. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 137-144. ISSN 1978-2993

Hua, Chyn Lee and Kah, Weng Siew and Jolius, Gimbun and C. K., Cheng (2014) Synthesis and Characterisation of Cement Clinker-Supported Nickel Catalyst for Glycerol Dry Reforming. Chemical Engineering Journal, 255 . pp. 245-256. ISSN 1385-8947

Hua, Chyn Lee and Kah, Weng Siew and Maksudur, R. Khan and S. Y., Chin and Jolius, Gimbun and C. K., Cheng (2014) Catalytic Performance of Cement Clinker Supported Nickel Catalyst In Glycerol Dry Reforming. Journal of Energy Chemistry, 23 (5). pp. 645-656.

Hua Chyn, Lee (2012) Evaluation of membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hudzaifah, Mohd Azam (2008) Simulation study of the plastic floor tile for two plate and three plate mold using plastic simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Huei, Ruey Ong (2012) Optimization and characterization of melamine urea formaldehyde (MUF) based adhesive using natural fillers for plywood. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Huei, Ruey Ong and Hegde, Gurumurthy and Vladimir, G. Chigrinov and Maksudur, R. Khan (2016) Sulfuric Disazo Dye Stabilized Copper Nanoparticle Composite Mixture: Synthesis and Characterization. RSC Advances, 6 (18). pp. 15094-15100. ISSN 2046-2069

Huei, Ruey Ong and Maksudur, R. Khan and Abu, Yousuf and Nor Amalina, Hussain and C. K., Cheng (2015) Synthesis and Characterization of a CaFe2O4 Catalyst for Oleic Acid Esterification. RSC Advances, 121 (5). pp. 100362-100368. ISSN 2046-2069

Huei, Ruey Ong and Maksudur, R. Khan and Ridzuan, Ramli and M. Y., Rosli and Rahman, Md. Wasikur (2016) Glycerolysis of Palm Oil Using Copper Oxide Nanoparticles Combined With Homogeneous Base Catalyst. New Journal of Chemistry . ISSN 1144-0546

Huei, Ruey Ong and Maksudur, R. Khan and Ridzuan, Ramli and Yonghua, Du and Shibo, Xi and M. Y., Rosli (2015) Facile Synthesis of Copper Nanoparticles in Glycerol at Room Temperature: Formation Mechanism. RSC Advances, 5 (31). pp. 24544-24549. ISSN 2046-2069

Husni, Basharudin (2008) Bioremediation of oil contaminated wastewater using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Husnul Fatimah, Husrin (2011) Liquid membrane tip extraction of malathion. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Hussain, Ahmad and Ali, Shahid and Ahmed, Iqbal and Jolius, Gimbun and Albeirutty, Muhammad H. and Rehan, Zulfiqar Ahmad (2016) Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst. Current Nanoscience, 12 (5). pp. 576-585. ISSN 1573-4137 (Print); 1875-6786 (Online)

Hwa, Ooi Kuan (2010) Study of cod reduction by anaerobic digestion using mixed culture from industrial waste. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

I

Ida Nuryani, Ibrahim (2008) Preparation and permeability study of polysulfone membrane for CO2 separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Intan Lyana, Ahmad (2014) Synthesis and characterization of hard kappa carrageenan capsule through glyoxal and glyoxylic acid crosslinking. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Intan Sakinah, Mohd Sharip (2012) Fischer-Tropsch (FT) synthesis of hydrocarbon over mesoporous CO/SBA-15 catalysis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Iqbal, Ahmed and Nur Farahah, Mohd Khairuddin and Ani, Idris and Noordin, Mohamed Yusof (2014) Influence of Multiwall Carbon Nanotube on Polyethersulfone/ Polyvinyl Alcohol Blend Membranes. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 31-35. ISSN 0127-9696 (print); 2180-3722 (online)

Iqmil, Hamdan (2013) Utilization of Eggshell Waste as Solid Catalyst for Biodiesel Production from Jatropha Curcas Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Irawan, Addie and Alam, Md. Moktadir (2015) PD-like FLC with Admittance Control of Hexapod Robot’s Leg Vertical Positioning for Seabed Locomotion. In: The 10th Asian Control Conference (ASCC 2015), 31 May - 3 Jun 2015 , Kota Kinabalu, Sabah. . (Unpublished)

Ishmael, Ukaegbu Chinonso and Shah Samiur, Rashid and Nik Sharifah Suhaiza, Nik Wan Ahmad (2016) Optimization of Laccase Enzyme Pretreatment Process Parameters of Empty Fruit Bunches (EFB) Using One-Factor-At-a-Time (OFAT). In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 178-186..

Islam, M. Amirul and Chee, Wai Woon and Baranitharan, E. and Abu, Yousuf and C. K., Cheng and Maksudur, R. Khan (2016) Evaluation of Electricity Generation and Wastewater Treatment from Palm Oil Mill Effluent Using Single and Dual Chamber Microbial Fuel Cell. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 100-106..

Islam, M. Amirul and Chee, Wai Woon and E., Baranitharan and C. K., Cheng and Abu, Yousuf and Maksudur, R. Khan (2016) Prolonged Stability of Air-Cathode Microbial Fuel Cell Performance by Inhibiting Aerobic Microbial Growth Using Platinum and Carbon Nanotube (PT-CNT) Nanoparticles as a Cathode Catalyst. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities, 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 251-253.. ISBN 978-967-0194-67-7

Islam, M. R. and M. D. H., Beg (2016) Effects Of Reinforcing Arrangement Of Kenaf Fibres Into Unsaturated Polyester For Improved Properties. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2020-2030. ISSN 2289-4659 (print); 2231-8380 (online)

Islam, Md. Amirul and Maksudur, R. Khan and Abu, Yousuf and Woon, Chee Wai and C. K., Cheng (2016) Electricity Generation form Pretreated Palm Oil Mill Effluent Using Klebsiella Variicola as an Inoculum in Microbial Fuel Cell. In: 4th International Conference on the Development in the in Renewable Energy Technology (ICDRET 2016), 7-9 January 2016 , United International University, Dhaka, Bangladesh. pp. 1-4..

Issaka, Souleyman A. and N. H., Abdurahman and M. Y., Rosli (2015) 20-80% Water-In-Diesel Emulsion Fuel Formulations and Stability Study for Duration of Two. International Journal Of Advanced Research, 3 (7). pp. 1394-1398. ISSN 2320-5407

Issaka, Souleyman A. and N. H., Abdurahman and M. Y., Rosli (2015) A Comparative Investigation on Petroleum Demulsification Techniques (Centrifuge and Green Chemicals Versus Conventional Chemicals). International Journal of Current Research, 7 (6). pp. 17292-17296. ISSN 0975-833X

Issaka, Souleyman A. and N. H., Abdurahman and M. Y., Rosli (2015) Effect of 20% Water Content on the Properties (Cetane Number, Rheology and Stability) of Emulsion Fuel in Comparison to the Commercial Diesel. International Journal of Current Research, 7 (7). pp. 17798-17805. ISSN 0975-833X

Issaka, Souleyman A. and N. H., Abdurahman and M. Y., Rosli (2015) Review on the Fundamental Aspects of Petroleum Oil Emulsions and Techniques of Demulsification. Journal of Petroleum & Environmental Biotechnology, 6 (2). pp. 1-15. ISSN 2157-7463

Iwansyah, Ade Chandra and Mashitah, M. Y. (2011) Comparative Evaluation Of Total Phenolics And Free Radical Scavenging Activity Of The Aqueous Extracts Of Labisia Pumila Var. Alata From Malaysia And Indonesia. In: The 2nd International Conference On Biotechnology And Food Sciences, 01-03 April 2011 , Bali, Indonesia. . (Unpublished)

Izirwan, Izhab and Mohd, Asmadi and Nor Aishah, Saidina Amin (2013) Characterization of Oil Palm Shell Activated Carbon and ZSM-5 Supported Cobalt Catalysts. In: 6th International Congress of Chemistry and Environment 2013, 8-10 July 2013 , Antwerp, Belgium. pp. 1-8.. (Unpublished)

Izirwan, Izhab and Siti Zubaidah, Sulaiman and Mohd Zulkifli, Mohamad Noor (2011) Effect Of H2 Enrichment On The Explosive Limits Of Liquefied Petroleum Gas (LPG) In Conventional Combustion. In: Energy and Sustainability 2011, 11-13 April 2011 , Alicante, Spain. . (Unpublished)

Izyan, Ismail (2012) Design of optimal water allocation network in chlor-alkali plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Izzah Suhaila, Abu Bakar (2010) Extraction of papain enzyme from papaya leaves using hot water extraction with ultrasonic – assisted pretreatment. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Izzat, Mohamad Adnan (2010) Algorithm development for optimization of a refrigeration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

J

Jailani, Salihon and N., Zainol (2012) Kinetic Modeling of Biogas Generation from Banana Stem Waste. In: Analysis and Design of Biological Materials and Structures. Advanced Structured Materials, 14 . Springer , Berlin Heidelberg, pp. 175-184. ISBN 978-3-642-22130-9 (print); 978-3-642-22131-6 (online)

Jaleha, Sathar (2012) Optimization Of Bacterial Cellulose Production From Acetobacter Xylinum By Using Response Surface Methodology (Rsm). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamil, R. and Nor Natashah , Nasir and Nur Aminatulmimi , Ismail and Hafizah, Ramli (2015) Extraction of Essential Oil from Murraya Koenigii Leaves'. In: International Conference of Fluid & Chemical Engineering 2015, 25-27 November 2015 , Adya Hotel, Langkawi. . (Unpublished)

Jamil, Roslan (2014) Characterization of essential oil from malaysian curry leaves. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamilah, Junuh (2009) A comparative study on protein separation using different techniques. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamiluddin, Jaafar and J. P., Siregar and A., Sulaiman and K. A. A., Jalal and Tezara, C. (2016) Study on Properties of Tapioca Resin Polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3178-3189. ISSN 1985-9325(Print); 2180-1606 (Online)

Jayshree, Thraisingam and Gupta, Arun and Malini, Subramaniam (2016) Natural Rubber Latex (NRL) and Rice Starch as an Alternative Binder in Wood Composite Industry. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 101-106. ISSN 1991-8178

Jeevan Nair, Vasudevan (2015) Development of coating for formaldehyde scavengers in wood composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jessinta, Sandanasamy and Azhari, H. Nour and Hazrulrizawati, Hamid and Ahmad Ziad, Sulaiman and Saiful Nizam, Tajuddin and Abdurahman, H. Nour (2015) Bioassay Guided Isolation and Identification of a Cytotoxic Compound from Azadirachta indica Leaves. Journal of the Chinese Chemical Society, 62 (8). pp. 680-688. ISSN 0009-4536 (print); 2192-6549 (online)

Jessinta, Sandanasamy and Azhari, H. Nour and Saiful Nizam, Tajuddin and Abdurahman, H. Nour (2014) Chemical Characterization and Biological Study of Azadirachta indica Extracts. European Journal of Academic Essays, 1 (10). pp. 9-16. ISSN 2183-3818(Print); 2183-1904(Online)

Jessinta, Sandanasamy and Azhari, H. Nour and Saiful Nizam, Tajuddin and N. H., Abdurahman (2013) Fatty Acid Composition and Antibacterial Activity of Neem (Azadirachta indica) Seed Oil. The Open Conference Proceedings Journal, 4 . pp. 42-48. ISSN 2210-2892

Jesslyn, Tan Kim Ean (2014) Simulation of reactive distillation column for n-butyl acrylate production from dilute acrylic acid. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jeyaratnam, Nitthiyah and Abdurahman, H. Nour and K., Ramesh and Akindoyo, John Olabode (2016) Mechanism of Microwave Assisted Hydrodistillation Studied Through Heat Analysis. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 445-452..

Ji Siang, Tan (2015) Hydrogen production from CO2 reforming of methane over cobalt-based catalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria and Ahmad Faizal, Mohd Zain (2013) Morphology, Topography and Thickness of Copper Oxide Thin Films Deposited using Magnetron Sputtering Technique. In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium , Langkawi, The Jewel of Kedah. pp. 352-355..

Jiah, Chee Soh and Soo, Ling Chong and C. K., Cheng (2017) Catalytic Ethylene Production from Ethanol Dehydration over Non-Modified and Phosphoric Acid Modified Zeolite H-Y (80) Catalysts. Fuel Processing Technology, 158 . pp. 85-95. ISSN 0378-3820

Jie, Liew Kok (2013) Scale up study of salt added batch distillation of azeotropic mixture : isopropanol/water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jimy, Ronald Atorm (2012) Separation enhancement of palm kernel by its specific gravity and flow rate of clay water bath. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Joannes Victor, Valentine @ Dol (2008) Treatment of POME via chitosan based flocculation : study the effect of dosage chitosan in removal oil from POME. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun and A.B, Dayang Radiah and Chuah, T.G (2004) Bioreactor Design Via Spreadsheet a study on the Monosodium Glutamate (MSG) Prosess. Journal of Food Engineering , 64 . pp. 277-283.

Jolius, Gimbun and Chuah, T.G and A., Fakhru'l Razi and S.Y Choong, Thomas (2003) Numerical Prediction of Cyclone Pressure Drop. Journal of Chemical Engineering and Environment, 2 (2). pp. 67-71.

Jolius, Gimbun and Chuah, T.G and Choong, T.S.Y and Barkawi, B.S (2004) A Finite Element Study of Three-Way Catalytic Converter for No Abatement Under Transient Isothermal Condition. International Journal of Engineering and Technology, 1 (2). pp. 188-196.

Jolius, Gimbun and Mohd Irwan Shah, Md Zain (2011) CFD Study On The Performance Of Oxygen Lance For Partial Combustion Unit At Direct Reduction Plant. In: Internation Conference on Chemical Innovation, 23-24 May 2011 , TATI UC. pp. 1-4.. (Unpublished)

Jolius, Gimbun and S.Y.Choong, Thomas and Chuah, T.G (2003) Comment On: Performance of Different Analytical Methods in Evaluating Grade Efficiency of Centrifugal Separators". Journal of Aerosol Science , 34 . pp. 1595-1596.

Jolius, Gimbun and S.Y.Choong, Thomas and Chuah, T.G and A., Fakhru'l Razi (2004) Prediction of the Effect of Dimension, Particle Density, Temperature, and Inlet Velocity on Cyclone Collection Efficiency. Jurnal Teknologi, , 40 . pp. 37-50.

Jolius, Gimbun and TG., Chuah and Thomas, S.Y.Choong and A., Fakhru'l Razi (2004) 3D CFD Modelling of Aerocyclones Operating at High Temperature. In: Symposium of Malaysian Chemical Engineers (SOMChE 2004), 13-14 December 2004, , Univ. Tek. Petronas, Tronoh, Perak. . . (Unpublished)

Jolius, Gimbun (2008) CFD Simulation of Aerocyclone Hydrodynamics and Performance at Extreme Temperature. Engineering Applications of Computational Fluid Mechanics, 2 (1). pp. 22-29. ISSN 1994-2060

Jolius, Gimbun (2013) Pelajar FKKSA menang pertandingan IEM Plant Design. CREATE . p. 32. ISSN 1823-7487

Jolius, Gimbun (2013) Pelajar FKKSA menang pertandingan IEM Plant Design. CREATE . p. 32. ISSN 1823-7487

Jolius, Gimbun (2013) Research paper competition. Quest, 9 (5). p. 13. ISSN 1985-8159

Jolius, Gimbun (2014) Ump postgraduate students excelled at the international conference on food properties 2014. Quest, 11 (7). p. 13. ISSN 1985-8159

Jolius, Gimbun and Ali, Shahid and Kanwal, Chitra Charan Suri Charan and Liyana, Amer Shah and Nurul Hidayah, Muhamad Ghazali and C. K., Cheng and Said, N. (2013) Biodiesel Production from Rubber Seed Oil Using Activated Cement Clinker as Catalyst. Procedia Engineering, 53 . pp. 13-19. ISSN 1877-7058

Jolius, Gimbun and Liew, Shi Yan and Nagy, Zoltan K. and Rielly, Chris D. (2016) Three-Way Coupling Simulation of a Gas-Liquid Stirred Tank using a Multi-Compartment Population Balance Model. Chemical Product and Process Modeling, 11 (3). pp. 205-216. ISSN 1934-2659

Jolius, Gimbun and Noor Intan Shafinas, Muhammad and Law, Woon Phui (2015) Unsteady RANS and Detached Eddy Simulation of the Multiphase Flow in a Co-Current Spray Drying. Chinese Journal of Chemical Engineering, 23 (9). 1421 - 1428. ISSN 1004-9541

Jolius, Gimbun and Noor Intan Shafinas, Muhammad and Woon, Phui Law (2015) Fluid Dynamics and Transport Phenomena Unsteady RANS and Detached Eddy Simulation of the Multiphase Flow in a Co-Current Spray Drying. Chinese Journal of Chemical Engineering, 23 (9). pp. 1421-1428. ISSN 1004-9541

Jolius, Gimbun and Nur Farahin, Ishak and Noor Intan Shafinas, Muhammad and Sook, Fun Pang and Mohd Arman, Abd Kadir and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Zulhabri, Khadisah (2014) Ultrasonic Assisted Extraction Polyphenols and Antioxidant from Nigella Sativa Seed. Journal of Engineering and Technology, 5 (2). pp. 17-26. ISSN 2180-3811

Jolius, Gimbun and Rielly, Chris Rielly and Nagy, Zoltan Nagy and Derksen, Jos J. (2012) Detached Eddy Simulation on the Turbulent Flow in a Stirred Tank. AIChE Journal, 58 . pp. 3224-3241. ISSN 1547-5905

Jonatan, Jacqlyn (2012) Liquefied petroleum gas(LPG)storage design. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Julius, Raymondee Junior (2010) The effect of suppression agents towards liquefied petroleum gas(LPG)& natural gas(NG)explosion limit. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Junaidi, Zakaria and Muhammad Azlan, Nazeri (2012) Optimization of Bacterial Cellulose Production from Pineapple Waste: Effect of Temperature, pH and Concentration. In: 5th Engineering Conference, "Engineering Towards Change - Empowering Green Solutions" , 10-12th July 2012 , Kuching Sarawak. .

Junaidi, Zakaria and Shahril, Mohamad and Siew, Kah Weng (2012) Enhancement of Biocellulose Production in Mixed Medium Culture. In: Malaysian International Conference on Trends in Bioprocess Engineering 2012 (MICOTRIBE 2012), 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi. . (Unpublished)

Juwari, (2011) A new tuning method for two-degree-of-freedom internal model control under parametric uncertainty. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Juwari, S and S. Y., Chin and Badhrulhisham, Abdul Aziz and Rosbi, Mamat (2012) Experimental Implementation Of The Mp-Gm (Maximum Peak - Gain Margin) Tuning Method A Tuning Method For 2dof-Imc Under Uncertainty Process. In: Systems and Informatics (ICSAI), 19-20 May 2012 , Yantai. pp. 414-418..

K

K., Ramesh and Anwaruddin, Hisyam and Suriya Kumar, Sinnadurai (2014) A New Approach to the Identification of Distillation Column Based on Hammerstein Model. Modelling and Simulation in Engineering, 2014 . pp. 799-806. ISSN 1687-5591

K., Ramesh and R., Ramesh and T. R., Kubendran (2013) Application of McAllister Model to Measure and Predict Thermo Physical Properties of Binary Liquid Mixture at Various Temperatures. In: International Conference on Chemical and Biological Engineering (ICCBE 2013), 14-15 November 2013 , Venice, Italy. pp. 670-674..

K., Yusoh (2015) Scratch Property of Polyurethane Nanocomposites Studied by Nanoindentation. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015, 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-6.. ISSN 1819-6608 (In Press)

K. F., Chong and M. Zaid, Rubaiyi and Teo, Ellie Yi Lih and Chong, Fui Chin and Ng, Eng Poh Reduction Of Graphene Oxide Nanosheets By Natural Beta Carotene And Its Potential Use As Supercapacitor Electrode. Arabian Journal of Chemistry . (In Press)

K. H., Mah and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and N., Zainol (2014) Separation of Xylose From Glucose Using Thin Film Composite (TFC) Nanofiltration Membrane: Effect of Pressure, Total Sugar Concentration and Xylose/Glucose Ratio. Jurnal Teknologi (Sciences and Engineering), 70 (1). pp. 93-98. ISSN 0127-9696 (print); 2180-3722 (online)

K. H., Mah and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2015) Separation Of Xylose From Glucose Using Thinfilm Composite Membrane: A Study On Separation Performance And Fouling Properties. In: International Conference on Environment 2015 (ICENV 2015), 18-19 August 2015 , Eastin Hotel, Pulau Pinang. pp. 1-8..

K. H., Mah and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2016) Separation of Xylose Using a Thin-Film Composite Nanofiltration Membrane: Screening of Interfacial Polymerization Factors. RSC Advances, 6 (73). pp. 69454-69464. ISSN 2046-2069

KAIRALLAH, AZZA NURAIN (2010) THE EFFECT OF VACUUM PRESSURE ON THE FLAMMABILITY LIMITS OF H 2 ENRICHMENT IN NATURAL GAS (NG). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

KHAIRUDDIN, UMMI HAJIRA (2010) FORMULATION OF MEDICINAL TOOTHPASTE FROM JATROPHA CARCUS LATEX. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and C. K., Cheng (2014) Characterization of La-promoted Ni/Al2O3 Catalysts for Hydrogen Production from Glycerol Dry Reforming. Journal of Energy Chemistry, 23 (1). pp. 15-21. ISSN 2095-4956

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and C. K., Cheng (2013) Hydrogen Production via Glycerol Dry Reforming Over La-NiAl2O3 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 160-166. ISSN 1978-2993

Kah, Weng Siew and Hua, Chyn Lee and Maksudur, R. Khan and Jolius, Gimbun and C. K., Cheng (2015) CO2 Reforming of Glycerol over La-Ni/Al2O3 Catalyst: A Longevity Evaluative Study. Journal of Energy Chemistry, 24 (3). pp. 366-373. ISSN 2095-4956

Kah Hoay, Tan (2015) Synthesis and characterisation of hydrophobic catalyst – Cs salt of 12-phosphotungstic acid functionalised dealuminated usy for the esterification of acrylic acid with butanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kah Weng, Siew (2012) Enhancement of biocellulose production in mixed medium culture. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kamal, Yusoh (2012) Pemerkasaan program akademik visi berdaya saing. Berita Harian, (13 Se .

Kamal, Jusoh and W.A.R, Wan Aizan (2003) Effectiveness of Acrylic Acid Based Terpolymer as a Corrosion Inhibitor in Water Treatment. In: 12th Scientific Conference of the Electron Microscopy, 15 – 17 December 2003 , City Bayview Hotel, Langkawi. . (Unpublished)

Kamal, Yusoh and Norazlina, H. (2015) Graphene Modifications in Polylactic Acid Nanocomposites: A Review. Polymer Bulletin, 72 (4). pp. 931-961. ISSN 0170-0839

Kamaliah, Abdul Samad and Norazwina, Zainol (2016) Release of Ferulic Acid from Banana Stem Waste by Ferulic Acid Esterase from Co-culture. International Research Journal of Engineering and Technology (IRJET), 3 (8). pp. 819-823. ISSN 2395-0072 (Print); 2395 -0056 (Online)

Kamaliah, Abdul Samad and Norazwina, Zainol (2017) The Use of Factorial Design for Ferulic Acid Production by Co-Culture. Industrial Crops and Products, 95 . pp. 202-206. ISSN 0926-6690

Kamaliah, Abdul Samad and Norazwina, Zainol and Nur Syahirah, Mohd Shkuri (2016) Development of Soil Co-Culture System for Ferulic Acid Production. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2253-2257. ISSN 1819-6608

Kamaluddin Sarif, Sukardi (2012) Optimization of fermentation for phb biopolymer using oil palm trunk SAP as medium component. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Kamarul Ariffin, Idris (2008) Effect of ammonia / water ratio in the performance absorption chiller. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarul Izhan, Soh (2010) Graft copolymerization of methyl methacrylate onto rice husk. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kamarulnizal, Amrin (2010) Scale up study and comparison of three downstream processes of monoclonal antibody production using superpro designer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kaniz, Ferdous and Uddin, M. Rakib and Maksudur, R. Khan and Islam, M. A. (2012) Biodiesel from Sesame Oil: Base Catalyzed Transesterification. International Journal of Engineering and Technology, 1 (4). pp. 420-431. ISSN 2049-3444

Karen, Yap Chia Ern (2013) A study of defects reduction in injection process of production line. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Karim, Md. Rezaul and Noor, Hindryawatia and Gaanty Pragas, Maniam and K. F., Chong (2013) Cooking Oil Waste Transesterification Over Alkali Metal (Li, Na, K) Impregnated with Rice Husk Silica: a Potential Heterogonous Base Catalysis. In: 4th Regional AFOB Symposium 2013, 17-19 Januari 2013 , Chiangmai Grandview Hotel and Convention Center, Thailand. . (Unpublished)

Kartar Singh, Pearljeet Kaur (2010) Effect of substrate concentration in producing higher butanol compared to ethanol by using clostridium acetobutylicum. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Karthik, Vasutheavan (2012) Production of biodiesel from rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Karthini, Kanestion (2012) Development Of Glass Coating Using Liquid Epoxidised Natural Rubber. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kasman, Mokhtar (2009) Effects of transmembrane pressure on the performance of flat sheet membrane on milk protein separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kathrina Nirmala, Manoharan (2013) Radiation grafting of fuctional polymers. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kau Mun Kit, Joshua (2015) Hydrodynamic of two immiscilible liquid flow system : biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Keong, Lau Weng (2013) Catalystic wet oxidation of wastewater containing acrylic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khafniza, Khanafiah (2012) Formulation of antibiotic ointmentfrom the jatropha latex curcas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khaidatul Hasni, Mohamad Alias @ Ayit (2009) Physical properties of soursop (Annona Muricata) powder produced by spray drying. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairatun Najwa, Mohd Amin and Nurul Sa'aadah, Sulaiman and Muhammad Shahir, Hasan and Ainun Jariah, Sansuri (2011) Synthesis And Swelling Behavior Of Agro-Waste Based Superabsorbent Composites. In: 5th International Congress of Chemistry and Environment (ICCE 2011), 27-29 May 2011 , Port Dickson. pp. 1-5.. (Unpublished)

Khairatun Najwa, Mohd Amin and Pratheep, K. Annamalai and Darren, J. Martin (2014) Processing of Thermoplastic Polyurethane Nanocomposite via Reactive Extrusion. In: International Polymer Conference (IPC 2014), 2-5 December 2014 , Tsukuba, Japan. . (Unpublished)

Khairatun Najwa, Mohd Amin and Pratheep, Kumar Annamalai and Isabel, Catherine Morrow and Darren, J. Martin (2015) Production of Cellulose Nanocrystals Via a Scalable Mechanical Method. RSC Advances, 70 (5). pp. 57133-57140. ISSN 2046-2069

Khairil Izuan, Ahmad Tarmidzi (2010) An experimental study of carboxylic acid prepared by carbon dioxide (CO2). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairool Azizul, Mohammad and Syarifah, Abd Rahim and Mohd Rushdi, Abu Bakar (2014) Nucleation Kinetics of Carbamazepine-Saccharin (CBZ-SAC) Co-Crystal. In: 2nd International Conference on Global Sustainability and Chemical Engineering (ICDSCE) 2014, 20-22 August 2014 , Kuala Lumpur. .

Khairu Aizam, Ibrahim (2006) Extraction of essential oils from ginger rhizome using steam distillation method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Khairul Afif, Mohammad (2012) Silver recovery from spent IPA using solid liquid extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Afif, Bakar @ Ismail (2008) Optimization of patchouli oil extraction by employing design of experiment (DOE) method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Anuar, Abdullah (2010) Potential natural gas pipeline at residential college unit (UMP). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khairul Anwar, Mohamad Said (2009) Ultrasonic extraction of antioxidant compound in guava. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Azirul, Muhamad Asrai (2013) Destabilization of crude oil emulsions via microwave assisted ultrasonic technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Azlan, Ismail (2012) Optimization of cyclone efficiency for separation of fibre and shell from palm kernel. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Rafik, Abdullah (2009) Gas dehydration process by using triethylene glycol and silica gel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairun Hasmadi, Othman (2009) CFD simulation of heat transfer in shell and tube heat exchanger. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2014) POFA: A Potential Partial Cement Replacement Material in Oil Palm Shell Lightweight Aggregate Concrete. Applied Mechanics and Materials, 567 . pp. 446-450. ISSN 1662-7482

Khalilurrahman, Azizan (2012) Fabrication of antibacterial bio composite from bacterial cellulose and Areca Catechu extract. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khalizatul Radhiah, Kasim (2010) Heat treatment of carbohydrates to produce caramel color. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khan, Tanveer Ahmed and Gupta, Arun and Saidatul Shima, Jamari and Podar, Pradeep (2014) Synthesis of Carbon Nano Fibers: Fabrication and Characterization of Carbon Nano Fibers/rea-formaldehyde resin. Asian Journal of Applied Sciences, 2 (6). ISSN 2321 – 0893

Khan, Tanveer Ahmed and Gupta, Arun and Saidatul Shima, Jamari and Yadav, Sumit Manohar (2014) Synthesis of Activated Carbon Particles: Fabrication and Characterization of Activated carbon Particles/Urea-formaldehyde Resin. In: Global Civil Engineering & Applied Science Conference (CEAASC 2014), 21-23 November 2014 , Taiwan. . (Unpublished)

Khan, Maksudur Rahman and E., Baranitharan and D. M. R., Prasad and Cheng, Chin Kui (2016) Fast Biofilm Formation and Its Role on Power Generation in Palm Oil Mill Effluent Fed Microbial Fuel Cell. MATEC Web of Conferences, 62 (04002). pp. 1-6.

Khan, Muhammad and Azhari, H. Nour and N. H., Abdurahman and Elhussein, Salah A. A. (2013) Non-edible Part of Capsicum annuum-novel Source of Acetylcholinesterase Inhibition: Molecular Docking and in Vitro Enzymatic Studies. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Khim, Tan Weng (2013) Dynamic modelling of crude distillation unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khomathan, Valayetham (2009) Development of spray dried sugar cane powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khoo, Choon Gek (2012) Production of virgin coconut oil via water soluble materials and centrifugation method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khoo, Sue Ann (2012) Enhancement of flow in pipeline transportation for crude oil emulsion. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kien Chung, Bert Chin (2012) Dynamic modeling of a reactive distillation column. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kim, Hoong Ng and C. K., Cheng (2015) A Novel Photomineralization of POME over UV-responsive TiO2 Photocatalyst: Kinetics of POME Degradation and Gaseous Product Formations. RSC Advances, 5 (65). pp. 53100-53110. ISSN 2046-2069

Kim, Hoong Ng and C. K., Cheng (2017) Photocatalytic Degradation of Palm Oil Mill Effluent Over Ultraviolet-Responsive Titania: Successive Assessments of Significance Factors and Process Optimization. Journal of Cleaner Production, 142 (4). pp. 2073-2083. ISSN 0959-6526 (print), 1879-1786 (online)

Kioh, Shin Fang (2010) Protein denaturation in pilot scale spray dryer. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Kishore, Kannan (2010) Preparation of synthetic polymer from plastic waste using sulphur dioxide. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kogulan, AL M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kogulan, M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Kong, Pu Wei (2013) Evaluation of tensile properties of natural sand particle reinforced polymer composite. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Kong, Zi Ling (2015) Enzymatic conversion of cassava starch to flour. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kong, Zi Ying (2015) Application of CuFe2O4 for photocatalytic fenton degradation of glycerol. Masters thesis, Universiti Malaysia Pahang.

Kong, Zi Ying and Wong, Nyap Xiang and C. K., Cheng and Maksudur, R. Khan (2014) The Application Of Magnesium Ferrite Photocatalyst For Photo Treatment Of Methylene Blue. In: Proceedings of the 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) In Conjuction with 21st Regional Synposium on Chemical Engineering (RSCE 2014), 29-30 October 2014 , Taylor's University Lakeside Campus, Subang Jaya. .

Kor, Yue Kim (2010) Investigating the effect of solid powder particle type on the turbulent multiphase flow in pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Krishnan, Jagan Rao (2008) Development of spray dried strawberry juice powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang .

Kritiga Shankar, Murugesan (2012) A comparison between the modern hydro distillation technique and microwave extractor in extracting lignans from phyllanthus niruri. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kwo Wei, Teh (2015) Study on the valorization of rice waste by using torrefaction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

L

Lai, Si Ying (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software : swimming google. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lakhveer, Singh (2013) Biohydrogen production from palm oil mill effluent using polyethylene glycol immobilized cells in upflow anaerobic sludge blanket reactor. Masters thesis, Universiti Malaysia Pahang.

Lakhveer, Singh and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and A. M. M., Sakinah (2013) Application of Immobilized Upflow Anaerobic Sludge Blanket Reactor Using Clostridium LS2 for Enhanced Biohydrogen Production and Treatment Efficiency of Palm Oil Mill Effluent. Biochemical Engineering Journal, 70 . pp. 158-165. ISSN 1369-703X

Latifah, Abu Bakar (2012) Miscibility study of gaharu essential oil in water and organic solvents. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Latifah Sakinah, Ismail (2013) Thermodynamic analysis of glycerol dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Kun Lu (2015) Continuous transesterification for tubular reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau Chin Yee, Cindy (2015) Reusability and leakage of immobilized laccase enzyme. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Law, Woon Phui and Jolius, Gimbun (2015) Influence of Nozzle Design on the Performance of a Partial Combustion Lance: A CFD Study. Chemical Engineering Research and Design, 104 . 558 - 570. ISSN 0263-8762

Law, Woon Phui and Wan Hanisah, Wan Ibrahim and Jolius, Gimbun (2016) Modeling of Methyl Methacrylate Polymerization Using MATLAB. Chemical Product and Process Modeling, 11 (3). pp. 185-196. ISSN 1934-2659

Lawanya, K. Ramu (2015) Optimization of bioethanol production using oil palm frond juice. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Leakath, Muhammad Zafran (2011) Characterization of pysio-chemical properties of novel one stop chemical method in preparations of copper nanofluids and possible explanations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Qiao Hui (2009) Total phenolic content and total flavonoid of H.Polyrhizus waste extract by using ultrasonic solvents extraction. Universiti Malaysia Pahang, Faculty of Chemical & Natural Resources Engineering.

Lee, Cheng Yee (2015) Water desorption characteristic of red gypsum. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leong, Choon Wei (2010) Inoculums development for the production of monoclonal antibody against congenital adrenal hyperplasia(cah). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Leong, Nguk Foong (2008) A Study on microwave - assisted extraction of patchouli essential oil : effect of hexane as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Letchmanan, Kumaran (2010) Formulation new flow improver in aqueous using natural mucilage extracted from aloe vera. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Li Mei, Tan (2014) Modeling plastics injection molding operation using simulation. Faculty of Industrial Management, Universiti Malaysia Pahang.

Liang, Yong Yeow (2012) Development of block-oriented model for reactive distillation column: MTBE synthesis. Masters thesis, Universiti Malaysia Pahang .

Liang, Yong Yeow (2015) Concentration polarisation minimisation in membrane channels through electro-osmotic mixing. PhD thesis, Universiti of New South Wales.

Liew, Shi Yan (2014) Evaluation of the performance of wax inhibitors on wax deposition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Meow Suan (2009) The effect of pipe length on the percentage drag reduction for water flowing into pipes with different diameters. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Rwi Hau (2009) Fabrication and characterization of biodegradable composite film from banana stem. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Lim, Beng Seng (2013) Production and characterization of chitosan from shrimp shells. Faculty of Chemical & Natural Resources Engineerig, Universiti Malaysia Pahang.

Lim, Jia Han (2014) Simultaneous power generation and wastewater treatment by using air-cathode single chamber microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Ting Chin (2006) Screening of xylanase producer from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lin, Choo Quan (2013) Simultaneous power generation and waste water treatment using microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lin, Tan Ban (2014) Production of the high quality torrefied oil palm biomass for efficient energy application. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling, Yeu Shin (2013) Study on the effect of processing parameters in the adsorption of xylose from glucose-xylose mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling, Yeu Shin (2013) Study on the effect of processing parameters in the adsorption of xylose from glucose-xylose mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling Wang Ming, Fiona (2015) Drag reduction in microfluidic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Linggang, Diana (2012) Biomass gasification of sugarcane bagasse and empty fruit bunch the effect of operating temperature and particle. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Liyana, Amer Shah (2010) Production of biodiesel from jatropha c. oil using koh and lipase candida r. in an airlift reactor. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Liyana, Amer Shah (2014) Microwave assisted enzymatic transesterification of waste cooking oil & rubber seed oil. Masters thesis, Universiti Malaysia Pahang.

Liyana, M. S. and N. H., Abdurahman and Rizauddin, D. and Jolius, Gimbun (2014) Stabilization And Characterization Of Heavy Crude Oilin-Water (O/W) Emulsions. International Journal of Research in Engineering and Technology (IJRET), 3 (2). pp. 489-496. ISSN 2321-7308 (print); 2319-1163 (online)

Liyana Nadirah, Mat Suli (2014) Oil-in-water emulsion enhancement for viscious crude oil flow in pipeline. Masters thesis, Universiti Malaysia Pahang.

Logapriya, Logamaintan (2015) Adsorption of natural dye on bamboo yarn. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Loh, Wee Keat (2014) A study of the curing kinetics of polyester resin from palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Loo, Mei Soon (2014) Synthesis of bio-lubricant through the esterification of oleic acid and trimethylolpropane catalysed by sulfated tin (ii) oxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Low, Wai Mun and I. S. M., Rafiqul and A. M. M., Sakinah and A. W., Zularisam (2016) Purification of Bioxylitol by Liquid–Liquid Extraction from Enzymatic Reaction Mixture. Separation Science and Technology , 51 (14). pp. 2369-2377. ISSN 0149-6395 (Print); 1520-5754 (Online)

Lyna Liyana, Johar (2010) The effect of vacuum pressure on the flammability limits of natural gas (NG). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

M

M., Nasir and Gupta, Arun and M. D. H., Beg and Chua, Gek Kee and A., Kumar (2014) Physical and Mechanical Properties of Mediumdensity Fibreboards Using Soy-Lignin Adhesives. Journal of Tropical Forest Science, 26 (1). pp. 41-49.

M., Shakaib and Iqbal, Ahmad and M. Y., Rosli and M. Z., Noor (2014) Preparation and Characterization of Modified Nylon 66 Membrane for Blood Purification. International Journal of Polymeric Materials and Polymeric Biomaterials, 63 (2). pp. 80-85. ISSN 0091-4037(Print); 1563-535X(Online)

M., Shakaib and Iqbal, Ahmad and M. Y., Rosli and Mohd Zulkifli, Mohamad Noor (2013) Preparation and Characterization of Modified Nylon 66 Membrane for Blood Purification. International Journal of Polymeric Materials and Polymeric Biomaterials, 63 . pp. 80-85. ISSN 0091-4037(Print); 1563-535X(Online)

M., Shakaib and M. Y., Rosli (2011) Effect of Permeation Velocity on Flow Behavior and Pressure Drop in Feed Channels of Membranes. In: ASEAN Conference on Scientific and Social Science Research (ACSSSR2011), 01 Jul 2011 . . (Unpublished)

M. A., Alaa and K., Yusoh and S. F., Hasany (2015) Pure Polyurethane and Castor Oil Based Polyurethane: Synthesis and Characterization. Journal of Mechanical Engineering and Sciences (JMES) , 8 . pp. 1507-1515. ISSN 2289-4659 (print); 2231-8380 (online)

M. A., Alaa and Kamal, Yusoh and S. F., Hasany (2015) Synthesis and Characterization of Polyurethane– Organoclay Nanocomposites Based on Renewable Castor Oil Polyols. Polymer Bulletin, 72 (1). pp. 1-17. ISSN 0170-0839

M. A., Faiz and Iqbal, Ahmed and Zulkafli, Hassan (2009) A Review of Mixed Matrix Membranes in Gas Separation. In: The Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 114-122..

M. A., Mohd Ali and R. M., Yunus and C. K., Cheng and Jolius, Gimbun (2015) Successive Optimisation of Waste Cooking Oil Transesterification in a Continuous Microwave Assisted Reactor. RSC Advances, 5 (94). pp. 76743-76751. ISSN 2046-2069

M. D. H., Beg and Zaman, Haydar U. (2014) Effect Of CaCO3 Contents On The Properties Of Polyethylene Nanocomposites Sheets. Fibers and Polymers, 15 (4). pp. 839-846. ISSN 1229-9197 (Print); 1875-0052 (Online)

M. D. H., Beg and Zaman, Haydar U. (2014) Effect of Coir Fiber Content and Compatibilizer on the Properties of Unidirectional Coir Fiber/Polypropylene Composites. Fibers and Polymers, 15 (4). pp. 831-838. ISSN 1229-9197 (Print); 1875-0052 (Online)

M. D. H., Beg and Zaman, Haydar U. (2014) Effect of Processing Parameters on the Properties of Rigid PVC/Organoclay Nanocomposites. Journal of Polymer Materials, 31 (1). ISSN 0973-8622 (print); 0970-0838 (online)

M. D. H., Beg and Zaman, Haydar U. (2014) Influence Of Two Novel Compatibilizers On The Properties Of LDPE/Organoclay Nanocomposites. Journal of Polymer Engineering, 34 (1). pp. 75-83. ISSN 2191-0340

M. D. H., Beg and Zaman, Haydar U. (2014) Mechanical, Thermal, And Rheological Properties of Nano-Calcium Carbonate/Polypropylene Composites Modified Bymethacrylic Acid. Journal of Thermoplastic Composite Materials . ISSN 1530-7980 (print); 0892-7057 (online)

M. D. H., Beg and A. K. M., Moshiul Alam and M. F., Mina and A. A., Mamun and A. K., Bledzki and Q. T. H., Shubhra (2014) Thermo-Mechanical and Morphological Properties of Short Natural Fiber Reinforced Poly (Lactic Acid) Biocomposite: Effect of Fiber Treatment. Fibers and Polymers, 15 (6). pp. 1303-1309. ISSN 1229-9197 (Print); 1875-0052 (Online)

M. D. H., Beg and Akindoyo, John Olabode and Suriati, Ghazali and Abdullah, A. Mamun (2015) Impact Modified Oil Palm Empty Fruit Bunch Fiber/Poly(Lactic) Acid Composite. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 165-170.

M. D. H., Beg and Akindoyo, John Olabode and Suriati, Ghazali and Nitthiyah, Jeyaratnam (2016) Synthesis and Characterization of Hydroxyapatite from Biowaste for Potential Medical Application. In: 18th International Conference on Materials Processing and Metallurgical Fundamentals, 5-6 September 2016 , Narita Tobu Hotel Airport Japan, Tokyo, Japan. . (Unpublished)

M. D. H., Beg and Alam, A. K. M. Moshiul and M. Y., Rosli and Mina, M. F. (2015) Improvement of Interaction between Pre-dispersed Multi Walled Carbon Nanotubes and Unsaturated Polyester Resin. Journal of Nanoparticle Research, 17 (1). p. 53. ISSN 1388-0764 (print), 1572-896X (online)

M. D. H., Beg and Alam, A. K. M. Moshiul and Mina, M. F. and Mamun, A. A. and Bledzki, A. K. (2014) Degradation And Stability Of Green Composites Fabricated From Oil Palm Empty Fruit Bunch Fiber And Polylactic Acid: Effect Of Fiber Length. Journal of Composite Materials . ISSN 0021-9983 (print); 1530-793X (online)

M. D. H., Beg and K. S., Ching and Y. C., Ching and C. A., Ng and N., Ishenny (2014) Effect of Polyurethane/Nanosilica Composite Coating on Water Resistance of Paper Substrate. Materials Research Innovations, 18 (S6). pp. 368-371. ISSN 1432-8917 (print); 1433-075X (online)

M. D. H., Beg and Kormin, S. and Mohd Bijarimi, Mat Piah and Zaman, Haydar U. (2016) Preparation and Characterization of Low-density Polyethylene/Thermoplastic Starch Composites. Advances in Polymer Technology, 35 (1). p. 21521. ISSN 1098-2329

M. D. H., Beg and M. R., Islam (2013) Characterization of Laccase-Treated Kenaf Fibre Reinforced Recycled Polypropylene Composites. BioResources, 8 (3). pp. 3753-3770. ISSN 1930-2126 (print); 1930-2126 (online)

M. D. H., Beg and M. R., Islam and Gupta, Arun and Rivai, M. (2015) Characterization Of Ultrasound-Treated Oil Palm Empty Fruit Bunch-Glass Fiber-Recycled Polypropylene Hybrid Composites. Journal of Polymer Engineering, 35 (2). pp. 135-143. ISSN 2191-0340

M. D. H., Beg and M. R., Islam and Saidatul Shima, Jamari (2014) Development Of Vegetable-Oil-Based Polymers. Journal of Applied Polymer Science, 131 (18). pp. 1-13. ISSN 1097-4628

M. D. H., Beg and M. Y., Rosli and Ridzuan, Ramli and Norhafzan, Junadi (2015) Microcrystalline Cellulose (MCC) from Oil Palm Empty Fruit Bunch (EFB) Fiber via Simultaneous Ultrasonic and Alkali Treatment. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 8-11. ISSN 2010-3778

M. D. H., Beg and Maksudur, R. Khan and Chowdhury, M. N. K. and Mina, M. F. and Ismail, A. F. (2015) Copper Nanoparticle In Cationized Palm Oil Fibres: Physico-Chemical Investigation. Colloid and Polymer Science, 293 (3). pp. 777-786. ISSN 0303-402X

M. D. H., Beg and Rivai, M. and Gupta, Arun and M. R., Islam (2014) Characterization of Oil Palm Empty Fruit Bunch and Glass Fibre Reinforced Recycled Polypropylene Hybrid Composites. Fibers and Polymers, 15 (7). pp. 1523-1530. ISSN 1229-9197 (Print); 1875-0052 (Online)

M. D. H., Beg and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Effects of Different Starch Types on the Physico-Mechanical and Morphological Properties of Low Density Polyethylene Composites. Journal of Polymer Engineering, 35 (8). pp. 793-804. ISSN 2191-0340

M. D. H., Beg and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Environmentally Degradable Sago Starch Filled Low-density Polyethylene. Journal of Polymer Engineering, 35 (6). pp. 551-563. ISSN 2191-0340

M. D. H., Beg and Zaman, Haydar U. (2016) Banana Fiber Strands–Reinforced Polymer Matrix Composites. Composite Interfaces, 23 (4). pp. 281-295. ISSN 0927-6440 (print); 1568-5543 (online)

M. D. H., Beg and Zaman, Haydar U. (2015) Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation. Radiation Physics and Chemistry, 109 . pp. 73-82. ISSN 0969-806X

M. F., Mina and M. D. H., Beg and M. R., Islam and A., Nizam and A. K. M. M., Alam and M. Y., Rosli (2014) Structures and Properties of Injection-Molded Biodegradable Poly(Lactic Acid) Nanocomposites Prepared with Untreated and Treated Multiwalled Carbon Nanotubes. Polymer Engineering & Science, 54 (2). pp. 317-326. ISSN 0032-3888

M. Fakhrur Azhar, Tukiman (2009) Studying the effect on the properties of fume silica percent formulated grease. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

M. Ilyas, Zubir (2009) Esterification of oleic acid with ethanol using tungstated zirconia : kinetic and modelling study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

M. N., Nasharudin and S. K., Kamarudin and U. A., Hasran and M. S., Masdar (2014) Mass Transfer and Performance of Membrane-Less Micro Fuel Cell: A Review. International Journal of Hydrogen Energy, 39 (2). pp. 1039-1055. ISSN 0360-3199

M. N. K., Chowdury and M. D. H., Beg and M. R., Khan and M. F., Mina and A. F., Ismail (2014) Copper Nanoparticle in Cationized Palm Oil Fibres: Physic-Chemical Investigation. Colloid and Polymer Science, 293 (3). pp. 777-786. ISSN 0303-402X

M. R., Islam (2010) Effect Of Coupling Agent On Mechanical Properties Of Composite From Kenaf And Recycled Polypropylene. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. . ISBN 978-967-0120-04-1

M. R., Islam and Gupta, Arun and M., Rivai and M. D. H., Beg (2015) Characterization of Microwave-Treated Oil Palm Empty Fruit Bunch/Glass Fibre/Polypropylene Composites. Journal of Thermoplastic Composite Materials . ISSN 1530-7980 (print); 0892-7057 (online)

M. R., Islam and Gupta, Arun and Rivai, M. and M. D. H., Beg and Mina, Md. Forhad (2016) Effects of Fiber-surface Treatment on the Properties of Hybrid Composites Prepared from Oil Palm Empty Fruit Bunch Fibers, Glass Fibers, and Recycled Polypropylene. Journal of Applied Polymer Science, 133 (11). p. 43049. ISSN 1097-4628

M. R., Islam and M. D. H., Beg and Saidatul Shima, Jamari (2015) Characterization of Multiwalled Carbon Nanotube Filled, Palm-Oil-Based Polyalkyds: Effects of Loading and In Situ Reaction. Journal of Applied Polymer Science, 133 (5). p. 42934. ISSN 1097-4628

M. R., Islam and M. D. H., Beg and Saidatul Shima, Jamari (2016) Dispersion of Montmorillonite Nanoclays and Their Effects on the Thermomechanical, Structural and Drying Properties of Palm Oil Based Coating. Progress in Organic Coatings, 91 . pp. 17-24. ISSN 0300-9440

M. R., Islam and M. D. H., Beg and Saidatul Shima, Jamari (2015) The Effects of Increasing Unsaturation in Palm Oil and Incorporation of Carbon Nanotubes on Resinous Properties. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (3). pp. 475-480.

M. R., Kamaruzaman and S. Y., Chin (2014) Synthesis and Characterization of Zirconium Phosphate as a Solid Catalyst for Esterification of Wastewater Containing Acrylic Acid. Journal of Applied Sciences , 14 (12). pp. 1339-1342. ISSN 1812-5654 (print); 1812-5662 (online)

M. R., Sazegar and A. A., Jalil and S., Triwahyono and R. R., Mukti and M., Aziz and M. A. A., Aziz and Setiabudi, H. D. and N. H. N., Kamarudin (2014) Protonation of Al-Grafted Mesostructured Silica Nanoparticles (MSN): Acidity and Catalytic Activity for Cumene Conversion. Chemical Engineering Journal, 240 . pp. 352-361. ISSN 1385-8947

M. R. M., Rejab and M. M., Rahman and K., Kadirgama and M. M., Noor (2008) Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19 , Kuching Sarawak, Malaysia. .

M. Rahim, Uddin and Maksudur, R. Khan and M. Wasikur, Rahman and C. K., Cheng and Abu, Yousuf (2015) Photocatalytic Conversion Of C02 Into Methanol: Significant Enhancement Of The Methanol Yield Over BI2S3/CDS Photocatalyst. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-5. ISSN 2289-697X

M. Rahim, Uddin and Maksudur, R. Khan and Md. Wasikur, Rahman and C. K., Cheng and Abu, Yousuf (2015) Photocatalytic Conversion of CO2 into Methanol: Significant Enhancement of the Methanol Yield over Bi2S3/CdS Photocatalyst. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-5. ISSN 2289-697X

M. S., Abdul Wahab and Sunarti, Abd Rahman (2016) Role of PEBAX 1657 On TFC Membranes for Biogas Separation: Biomethane Purification for Sustainable Energy. In: National Congress on Membrane Technology, 24-25 August 2016 , Pulai Spring Resort, Johor Bahru. . (Unpublished)

M. Said, Farhan and Brooks, John and Chisti, Yusuf (2014) Optimal C:N ratio for the production of red pigments by Monascus ruber. World J Microbiol Biotechnol, 30 . pp. 2471-2479.

M. T. S., Syaima and K. H., Ong and Ishenny, Mohd Noor and M. I. M., Zamratul and S. A., Brahim and M. M., Hafizul (2015) The Synthesis of Bio-Lubricant Based Oil by Hydrolysis and Non-Catalytic of Palm Oil Mill Effluent (Pome) Using Lipase. Renewable and Sustainable Energy Reviews, 44 . pp. 669-675. ISSN 1364-0321

M. Z., Muzzakar and S., Ahmad and M. A., Yarmo and A., Jalar and Mohd Bijarimi, Mat Piah (2013) Shear Strength of Single Lap Joint Aluminium-Thermoplastic Natural Rubber (Al-TPNR) Laminated Composite. Journal of Physics: Conference Series, 423 . pp. 1-6. ISSN 1742-6588

MUTUN, JESSICO (2010) Effects of coagulation medium on asymmetric polyethersulfone membrane for carbon dioxide and methane separation. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ma Umaira Suhaddha, Zainal Abidin (2012) Solvent production from palm oil mill effluent (POME) by clostridium beijerinckii. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Maa Ajmalaisyatu Illani, Mohd Nawi (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of lemon grass essential oil. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mackenzie, Banyeng (2008) Treatment of POME via chitosan based flocculation : a studies of agitation speed and oil concentration in POME. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mah, Kah Hong and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and Nurul Ain , Jalanni and N., Zainol (2014) Study on Factors Affecting Separation of Xylose From Glucose By Nanofiltration Using Composite Membrane Developed From Triethanolamine (Teoa) And Trimesoyl Chloride (TMC). In: Proceedings of the 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) In Conjuction with 21st Regional Synposium on Chemical Engineering (RSCE 2014), 29-30 October 2014 , Taylor's University Lakeside Campus, Subang Jaya. pp. 1-10..

Mah, Kah Hong (2016) Optimization of interfacial polymerization thin film composite membrane for separation of xylose from glucose. Masters thesis, Universiti Malaysia Pahang.

Mahadi, B. Bahari and Goo, Boon Chin and Pham, Thong L. M. and Tan, Ji Siang and Danh, Huong T. and Nurul, Ainirazali and Vo, Dai-Viet N. (2016) Hydrogen-rich Syngas Production from Ethanol Dry Reforming on La-doped Ni/Al2O3 Catalysts: Effect of Promoter Loading. Procedia Engineering, 148 . pp. 654-661. ISSN 1877-7058

Mahadi, Bahari (2014) Cfd simulation study on the effect of leak size towards oil leakage from submarine pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mahadi, Bahari and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N. (2015) Ethanol Dry Reforming for H2-Rich Syngas Production Over Ce-Ni/Al2O3 Catalyst. In: 5th International Conference on Environment 2015, 18-19 August 2015 , Penang, Malaysia. . (Unpublished)

Mahadi, Bahari and Phuc, Nguyen Huu Huy and Bawadi, Abdullah and Alenazey, Feraih and Vo, Dai-Viet N. (2016) Ethanol Dry Reforming for Syngas Production Over Ce-promoted Ni/Al2O3 Catalyst. Journal of Environmental Chemical Engineering . ISSN 2213-3437 (In Press)

Mahadi, Bahari and Vo, Dai-Viet N. and Nguyen, Huu Huy Phuc and Nurul Aini, Razali (2015) Catalytic Performance of La-Ni/Al2O3 Catalyst for CO2 Reforming of Ethanol. In: The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), 15-20 December 2015 , Hawaii, US. pp. 1-6.. (Unpublished)

Mahathir, Kaddir (2009) Permeability and selectivity study of natural gas with CO2, N2, and O2 using polyacrylonitrile (PAN) membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mahfuzah, Mansor (2009) Preparation of biodiesel from waste cooking oil and refines bleached deodorized oil using single step batch transesterification process with the aid of KOH as the catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maksudur, R. Khan and Amin, M. S. A. and Sarker, S. and Ferdaus, K. (2012) Design and Fabrication of Membrane Less Microbial Fuel Cell (ML-MFC) using Food Industries Wastewater for Power Generation. Journal of Chemical Engineering, 27 (2). pp. 55-59. ISSN 2221-7436

Maksudur, R. Khan and Baranitharan, E. and C. K., Cheng and Yousuf, Abu and Wee, Fei Aaron Teo and Tan, Geok Yuan Annie (2015) Enhanced Power Generation Using Controlled Inoculum From Palm Oil Mill Effluent Fed Microbial Fuel Cell. Fuel, 143 . pp. 72-79. ISSN 0016-2361

Maksudur, R. Khan and Batcha, Abeed Fatima Mohidin and Prasad, D. M. Reddy and Hamidah, Abdullah (2014) Biosynthesis of Poly(3-hydroxybutyrate) (PHB) by Cupriavidus Necator H16 from Jatropha Oil as Carbon Source. Bioprocess and Biosystems Engineering, 37 (5). pp. 943-951. ISSN 1615-7591 (print); 1615-7605 (online)

Maksudur, R. Khan and E., Baranitharan and D. M. R., Prasad (2013) Treatment of Palm Oil Mill Effluent in Microbial Fuel Cell Using Polyacrylonitrile Carbon Felt as Electrode. Journal of Medical and Bioengineering, 2 (4). pp. 252-256. ISSN 2301-3796

Maksudur, R. Khan and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Aphanamixis Polystachya: A Potential Non-Edible Source of Biodiesel in Bangladesh. Journal of Chemical Engineering, 28 (1). pp. 45-49. ISSN 2221-7436

Maksudur, R. Khan and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Higher FFA Containing Castor Oil. International Journal of Scientific & Engineering Research, 4 (12). pp. 401-406. ISSN 2229-5518

Maksudur, R. Khan and Ferdous, Kaniz and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Soybean Oil by using Heterogeneous Catalyst. International Journal of Energy and Environment (IJEE), 4 (2). pp. 243-252. ISSN 2076-2895 (Print); 2076-2909 (Online)

Maksudur, R. Khan and Ganasen, Ponnarasy and Kalam, M. Abdul and Mohd Sabri, Mahmud (2014) Effect of Visible Light on Catalytic Hydrolysis of P-Nitrophenyl Palmitate by the Pseudomonas Cepacia Lipase Immobilized on Sol-Gel Support. Bioprocess and Biosystems Engineering, 2014 . pp. 1-7. ISSN 1615-7591 (print); 1615-7605 (online)

Maksudur, R. Khan and Huei, Ruey Ong and Yousuf, Abu and Chowdhury, M. N. K. and C. K., Cheng (2014) Synthesis and Characterization of CuO/C Catalyst for the Esterification of Free Fatty Acid in Rubber Seed Oil. Fuel, 120 . pp. 195-201. ISSN 0016-2361, ESSN: 1873-7153

Maksudur, R. Khan and Huei, Ruey Ong and Yousuf, Abu and Nitthiyah, Jeyaratnam and Prasad, D. M. Reddy (2015) Effect of Waste Rubber Powder as Filler for Plywood Application. Polish Journal of Chemical Technology, 17 (1). pp. 41-47. ISSN 1899-4741

Maksudur, R. Khan and Kar, Min Chan and Huei, Ruey Ong and C. K., Cheng and Wasikur, Rahman (2015) Nanostructured Pt/MnO2 Catalysts and Their Performance for Oxygen Reduction Reaction in Air Cathode Microbial Fuel Cell. International Journal of Electrical, Computer, Electronics and Communication Engineering, 9 (3). pp. 270-276.

Maksudur, R. Khan and M. Z. B., Mukhlish and M. S. I., Mazumder and Ferdous, Kaniz and D. M. R., Prasad and Z., Hassan (2014) Uptake of Indosol Dark-blue GL Dye from Aqueous Solution by Water Hyacinth Roots Powder: Adsorption and Desorption Study. International Journal of Environmental Science and Technology, 11 (4). pp. 1027-1034. ISSN 1735-1472(Print); 1735-2630(Online)

Maksudur, R. Khan and Mozumder, Salatul Islam and Islam, Akhtarul and Prasad, D. M. Reddy and Alam, M. Mohibul (2012) Methylene Blue Adsorption onto Water Hyacinth: Batch and Column Study. Water, Air and Soil Pollution , 223 . pp. 2943-2953. ISSN 0049-6979 (print); 1573-2932 (online)

Maksudur, R. Khan and Nor Amalina, Hussain and C. K., Cheng (2014) Synthesis and Characterization of Photocatalyst for Conversion of CO2 to Methanol under Visible Light Irradiation. In: International Conference on Chemical and Biological Engineering (ICCBE 2014), 11-12 September 2014 , Singapore. . (Unpublished)

Maksudur, R. Khan and Ong, Huei Ruey and Ridzuan, Ramli and M. Y., Rosli (2014) Synthesis of Copper Nanoparticles at Room Temperature Using Hydrazine in Glycerol. Applied Mechanics and Materials, 481 . pp. 21-26. ISSN 1662-7482

Maksudur, R. Khan and Reddy Prasad, D. M. and Hamidah, Abdullah and Mohidin Batcha, Abeed Fatima (2013) Kinetic Analysis on Cell Growth and Biosynthesis of Poly (3-Hydroxybutyrate) (PHB) in Cupriavidus Necator H16. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 516-519. ISSN 2010-3638

Maksudur, R. Khan and Saha, Pradip and Alam, Md. Fakhrul and Baishnab, Ajit Chandra and Islam, M. A. (2014) Fermentable Sugar Production and Separation from Water Hyacinth Using Enzymatic Hydrolysis. Sustainable Energy, 2 (1). pp. 20-24. ISSN 2372-2134

Maksudur, R. Khan and Saha, Pradip and Dep, T. K. and Sony, S. Y. and Baishnab, Ajit Chandra (2012) Treatment of Textile Dyes by Bio-chemical Process in Stirred Tank Sequencing Batch Bioreactor. Journal of Chemical Engineering, 27 (2). pp. 83-87. ISSN 2221-7436

Maksudur, R. Khan and Saha, Pradip and Fakhrul Alam, Md. and Baishnab, Ajit Chandra and Islam, M. A. (2014) Production of Bio-fuel (Bio-Ethanol) from Biomass (Pteris) by Fermentation Process with Yeast. Sustainable Energy , 2 (1). pp. 25-28. ISSN 2164-9219 (print); 2164-9065 (online)

Maksudur, R. Khan and Saha, Pradip and Sony, Shamima Yesmin and Mazumder, Sraboni and Deb, Tanmoy Kanti and Islam, Akhtarul (2013) Kinematic Study of Reducing Sugar Production From Rice Straw by Raw Woodrotting Enzyme Strain. Journal of Chemical Engineering, 28 (1). pp. 32-35. ISSN 2221-7436

Maksudur, R. Khan and Salam, M. A. and Pondith, Paritush Chandra and Islam, Ariful and Uddin, Mohammad Rakib and M. A., Islam (2013) Conversion of Cellulosic Waste into Fermentable Sugar: Process Optimization. Journal of Chemical Engineering, 28 (1). pp. 27-31. ISSN 2221-7436

Maksudur, R. Khan and Tan, Wooi Chuan and Abu, Yousuf and Chowdhury, M. N. K. and C. K., Cheng (2015) Schottky Barrier and Surface Plasmonic Resonance Phenomena Towards the Photocatalytic Reaction: Study of Their Mechanisms to Enhance the Photocatalytic Activity. Catalysis Science & Technology, 2015 (5). pp. 2522-2531. ISSN 2044-4753 (printed); 2044-4761 (online)

Malek, Mohd Firdaus Sonicated sol-gel preparation of nanoparticulate ZnO thin films with various deposition speeds: The highly preferredc-axis(0 0 2) orientation enhances the final properties. Journal of Alloys and Compounds . ISSN 0925-8388 (print), 1873-4669 (online)

Malyanah, Mohd Taib and Akbar, Majid Majeed and Thanapalan, Murugesan (2014) Physical and Excess Properties of Ternary Mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate + monoethanolamine + water at temperature from (303.15 to 353.15)K. Journal of Molecular Liquids, 190 . pp. 23-29. ISSN 0167-7322

Manoharan, M Nerranjini (2012) Improving the gas oil flow in pipelines by designing new floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Manpreet Kaur, Paramjit Singh (2014) Adsorption study of betacyanin on fibre. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Manpreet Kaur, Paramjit Singh and A. M. M., Sakinah and A. W., Zularisam (2016) Adsorption Study of Betacyanin on Fibre. In: 18th International Conference on Textile Engineering (ICTE 2016), 24-25 March 2016 , Miami, USA. pp. 1-8.. ISSN 2010-3778 (In Press)

Mardhiana, Ismail (2010) Development of asymmetric polyethersulfone (PES) membrane for O/N Separation by using difference technique of membrane formation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mardhiana, Ismail and Ghazi Faisal, Najmuldeen and Wan Mohd Hafizuddin, Wan Yussof (2015) Exploring the Transesterification of Castor Oil to Produce Second Generation Biodiesel using a Novel Catalyst. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 289-293. ISSN 2278-0181

Mariah, Che Mamat (2015) Development of natural product based flocculant agent to treat petroleum refinery industry wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maryam, Ismail (2010) Modelling of batch biopolymer fermentation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Maryani, Basri (2014) Potential study of regenerating waste dialyzer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Maryudi, M. (2012) Degradation of high density polyethylene containing manganese carboxylates as pro-degradant additives under artificial and natural weathering. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Maryudi, M. and Anwaruddin, Hisyam and M. Y., Rosli and M. D. H., Beg (2013) Thermo-oxidative Degradation of High Density Polyethylene Containing Manganese Carboxylate. International Journal of Engineering Research and Applications (IJERA), 3 (2). pp. 1156-1165. ISSN 2248-9622

Masduki, Mohammad Syafiq (2006) Fabrication of polysulfone membrane : the effect of cooling process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mashaida, Md Sharif (2009) Bioconversion of agricultural solid waste (banana tree stem) by mixed culture for use as carbon source for fermentation medium. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Masita, Md Isa (2010) The extraction of papain enzymes from papaya leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maskhairiah, Ismail (2010) Comparison the nutrients in soybean products between primary analysis and NIR analysis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mattei, G. and S. N., Aqida (2016) Optical Properties of Surface Layers Enhanced Raman Scattering. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-11. ISBN 978-0-12-803581-8

Mazia, Awang (2010) Optimization of biopolymer production in shake flask using oil palm trunk sap medium. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mazlan, Sadri (2010) Degradation of methyl orange using ultrasonic irradiation: enhanced with adsorption using newspaper. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mazni, Ismail (2013) Model development and validation of samaria doped ceria (SDC) based solid oxide fuel cell operating with practical fuels. PhD thesis, University of Waterloo.

Mazrul Nizam, Abu Seman and L. M., Kei and M. A., Yusoff (2015) Synthesis and Performance of Polyamide Forward Osmosis Membrane for Natural Organic Matter (NOM) Removal. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (2). pp. 368-371. ISSN 2010-3778

Mazrul Nizam, Abu Seman and Nidal, Hilal and M., Khayet (2013) UV-Photografting Modification of NF Membrane Surface for NOM wfouling Reduction. Desalination and Water Treatment, 51 (25-27). pp. 4855-4861. ISSN 1944-3994

Mazrul Nizam, Abu Seman and Ryan Yeo, Whye Seong (2014) Effect of Draw Solution on the Treatment of Humic Acid in Forward Osmosis Process. In: 8th Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014), 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-5..

Mazza, A. S. and N. H., Abdurahman and Said, N. and N., Zainol and Mohamed, B. S. (2014) Optimization of Ultrasonicated Membrane Anaerobic System for Sewage Sludge Treatment Using Response Surface Methodology (RSM). International Journal of Research in Engineering and Technology (IJRET), 3 (2). pp. 1-5. ISSN 2321-7308 (print); 2319-1163 (online)

Md Shaarani, S. and Md Jahim, J. and A. Rahman, R. and Md Illias, R. (2014) Immobilization Strategy of Recombinant Xylanase from Trichoderma reesei by Cross-linked Enzyme Aggregates. In: International Conference on Bioengineering (ICBE 2014), 19-20 June 2014 , Venice, Italy. .

Md. Noor, Arifin (2012) 35 sukarelawan FKKSA timba pengalaman jayakan persidangan gas sedunia 2012. CREATE . p. 32. ISSN 1823-7487

Md. Noor, Arifin 35 volunteers from Faculty of Chemical & Natural Resources Engineering gained valuable experience from 2012 World Gas Conference. Pekan Review, 6 . pp. 38-39. ISSN 2180-3099

Md. Rahim, Uddin (2016) Development of Tio2 loaded Cufe2o4 photocatalyst for CO2 conversion into methanol under visible light irradiation. Masters thesis, Universiti Malaysia Pahang.

Megat Ahmad Faiz, Abdul Aziz (2010) The extraction of fish oil from eel by using microwave extractor. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mei, Charlotte Kho Sui (2013) Investigating oil mixture flow characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mei, Irene Lock Sow and Lock, S. S. M. and Vo, Dai-Viet N. and Bawadi, Abdullah (2016) Thermo-Catalytic Methane Decomposition for Hydrogen Production: Effect of Palladium Promoter on Ni-based Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 191-199. ISSN 1978-2993

Mei Kei, Lai (2015) Characterization of cellulose tri acetate (CTA) forward osmosis membrane for nom removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Meng, Liu (2011) Identification and partial characterisation of locally isolated lipolytic bacteria. Masters thesis, Universiti Malaysia Pahang.

Meor Mohd Dhiya, Mior Zahidi (2009) Upgrading low quality natural gas with Co2 selective polymers membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mimi Sakinah, Abdul Munaim (2010) Sustainable production of sorbitol from biomass using green technology approach. Quest, 6 (3). p. 19. ISSN 1985-8159

Mior Ahmad Khushairi, Mohd Zahari (2013) Scaling up of poly (3-hydroxybutyrate) production from oil palm frond juice by Cupriavidus necator (CCUG52238T). Research Journal of Chemistry and Environment, 17 (7 ). pp. 18-24. ISSN 0972-0626 (Print), 2278-4527 (online)

Mior Ahmad Khushairi, Mohd Zahari and Ahmad Muhaimin, Roslan and Mohd Ali, Hassan and Shirai, Yoshihito (2014) Investigation of Oil Palm Frond Properties for Use as Biomaterials and Biofuels. Tropical Agriculture and Development, 58 (1). pp. 26-29. ISSN 1882-8450

Mior Ahmad Khushairi, Mohd Zahari and Dhiyatul Ridhwan, Md Nasarudin (2013) Potential Evaluation of Oil Palm Frond Juice for The Production of Bioethanol. In: Conference on Industrial Academia Initiative in Biotechnology (CIA:Biotech 2013), 5-7 December 2013 , Equatorial Cameron Highlands,Pahang. .

Mior Ahmad Khushairi, Mohd Zahari and Hidayah, Ariffin and Mohd Ali, Hassan (2014) Enhanced Poly(3-hydroxybutyrate) Production from Oil Palm Frond Juice by Cupriavidus necator NCIMB 11599. In: AFOB Regional Symposium 2014 (ARS 2014), 9-11 February 2014 , Seri Pacific Hotel, Kuala Lumpur. p. 1.. (Unpublished)

Mior Ahmad Khushairi, Mohd Zahari and Jailani, Salihon (2012) Factors Affecting Poly(3-hydroxybutyrate) Product Ion from Oil Palm Frond Juice by Cupriavidus Necator (CCUG52238T). Journal of Biomedicine and Biotechnology, 2012 .

Mior Ahmad Khushairi, Mohd Zahari and Jailani, Salihon (2012) Renewable Sugars From Oil Palm Frond Juice as an Alternative Novel Fermentation Feedstock for Value-Added Products. Bioresource Technology, 110 (April ). pp. 566-571. ISSN 0960-8524

Universiti Putra Malaysia (2013) Renewable Sugars From Oil Palm Wastes. WO/2013/043036.

Mior Ahmad Khushairi, Mohd Zahari and Mohd Noriznan, Mokhtar and Hidayah, Ariffin and Shirai, Yoshihito and Mohd Ali, Hassan (2014) Case Study for a Palm Biomass Biorefinery Utilizing Renewable Sufars from Oil Palm Frond for the Production of Poly(3-hydroxybutyrate) Bioplastic. In: 13th International Symposium on Bioplastics, Biocomposites & Biorefining (ISBBB 2014), Guelph, Ontario, Canada , 19-24 May 2014. .

Mior Ahmad Khushairi, Mohd Zahari and Sharifah Soplah, Syed Abdullah and Ahmad Muhaimin, Roslan and Hidayah, Ariffin and Shirai, Yoshihito and Mohd Ali, Hassan (2014) Efficient Utilization of Oil Palm Frond for Bio-Based Products and Biorefinery. Journal of Cleaner Production, 5 . pp. 252-260. ISSN 0959-6526 (print), 1879-1786 (online)

Mior Ahmad Khushairi, Mohd Zahari and Mohd Rahimi, Zakaria Mamat and Hidayah, Ariffin and Mohd Ali, Hassan (2014) Bio-based Production of Crotonic Acid by Pyrolysis of poly(3-hydroxybutyrate) Inclusions. Journal of Cleaner Production, 83 . pp. 463-472. ISSN 0959-6526 (print), 1879-1786 (online)

Mior Ahmad Khushairi, Mohd Zahari and Nur Falia Syazana Manja, Farid and Hidayah, Ariffin and Mohd Rahimi, Zakaria Mamat and Mohd Ali, Hassan (2015) Non-Solvent Pretreatment of Poly(3-Hydroxybutyrate) for Improved Bio-Based Crotonic Acid Production. RSC Advances, 5 (42). pp. 33546-33553. ISSN 2046-2069

Mishra, Puranjan and Singh, Lakhveer and A. W., Zularisam (2016) Influence of Nano Nickel Oxide (NNO) Particles on Hydrogen Production in Dark Fermentation of Palm Oil Mill Effluent. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 783-787..

Mohamad Afis, Adnan (2010) Recovery and separation of cellulose from sawdust wood hydrolysates using membrane creator: effect of transmembrane pressure (TMP) and cross flow velocity (CFV). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Al Amin, Razali and Farhan, M. Said (2015) Preliminary Study on Solid State Fermentation of Monascus Purpureus for Pigment Production in 2.3 L Stirred Drum Bioreactor. In: 5th International Conference on Advancement in Science and Technology (ICAST 2015), 10-12 Aug 2015 , Cherating, Kuantan. . (Unpublished)

Mohamad Al Rassid, Mohamad Borhanudin (2012) A new material supply mechanism for plunger type injection molding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Amirul, Anuar (2015) Biomethanation of sugarcane wastewater by ultrasonic membrane anaerobic system (UMAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Atif, Suleiman (2006) To convert bitumen powder to bitumen emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Azamudin, Ishak (2010) Effects of temperature on vapor liquid equilibrium of MTBE-methanol mixtures. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Fakhrol Radzi, Zulkefli (2014) Prediction of pressure drop of slug flow in vertical pipes using mechanistic model. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Fariz, Ahmad (2009) Production of virgin coconut oil via centrifugation and oven methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Fikhri, Burhanuddin (2010) Study of cod removal by anaerobic digestion using mixed culture from sewage. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Firdaus, Mohamad Ghazali (2012) Synthesis and characterization of cobalt supported TiO2 with Mn/Zn/Zr promoters for fischer tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohamad Hadi, Tairin (2013) Development of polyethersulfone–poly vinylidenefluoride (PES-PVDF) thin film composite membrane FOR CO2/N2 gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Hafiz Zulkarnain, Azman (2015) Molecular simulation studies of 1, 6 hexamethylenediamine (HMDA) absorption process for co2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Ikwan, Zakaria (2010) Development of nonlinear model for continuous stirred tank reactor (CSTR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Irsyad, Mohamad Mazuki (2012) Effect of Different Mesostructured Material Based On Silica (Tio2, Sba-15 And Cab-O-Sil) As Cobalt Supports For Fischer-Tropsch Synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Irsyad, Othman (2014) Carbon dioxide (CO2) reforming of methane to syngas over NI/SBA-15 catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Izhar, Mohd Samin (2012) Cultivating conditions influence invertase production by Aspergillus Niger in submerged culture. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohamad Muzakkir, Tajuddin and Muhammad Hasbullah, Patulla and Asmida, Ideris and Mazni, Ismail (2017) Self-combustion Synthesis of Ni Catalysts Modified with La and Ce using Glycine–Nitrate Process (GNP). Malaysian Journal of Catalysis, 2 (1). pp. 8-11. ISSN 0128-2581

Mohamad Nadzrie, Lary (2014) Characterisation of biodiesel produced from castor oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Naquib Fitri, Mohd Nadzri (2010) Biopetrol syhthesized from stearic acid - heterogeneous catalytic cracking by zeolite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Norahiman, Abdurahman (2012) Adsorption Studies of Synthetic Batik Dye Using Granular Activated Carbon in Continuous System. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Redzuan, Bujang (2010) An experimental study of conversion of carbon dioxide into hydrocarbon fuel by using photocatalytic method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Rizza, Othman and Mohamad Wijayanuddin, Ali and Mohd Zaki, Kamsah (2007) Process Fault Detection Using Hierarchical Artificial Neural Network Diagnostic Strategy. Jurnal Teknologi (Sciences and Engineering), 46 . pp. 11-26. ISSN 0127-9696 (print); 2180-3722 (online)

Mohamad Rizza, Othman and Rosshila, Idris and Mimi Haryani, Hassim and Wan Hanisah, Wan Ibrahim (2016) Prioritizing HAZOP Analysis using Analytic Hierarchy Process (AHP). Clean Technologies and Environmental Policy, 18 (5). pp. 1345-1360. ISSN 1618-954X

Mohamad Rizza, Othman and Umarul Imran, Amran and Gade Padu, Rangaiah (2015) Process Optimization of DWC for Fatty Acid Fractionation using Taguchi Methods of Experimental Design. Chemical Engineering Transactions, 45 . pp. 925-930. ISSN 2283-9216

Mohamad Salihi, Ramli (2015) Microcrystalline cellulose from biomass-palm oil frond. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Sazwan, Ismail (2013) Extraction of beta-carotene from carrot via soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Z., Nordin and Mohamad R., Othman and Mohd K. A., Hamid (2015) Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems. Chemical Engineering Transactions, 45 . pp. 211-216. ISSN 2283-9216

Mohamad Zaidi, Yahaya (2013) Study on factors affecting extraction of carotene from carrot by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamed Afizal, Mohamed Amin (2009) Process monitoring on AFPT pilot plant by using statistical process control. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamed Asshafie, Mohamed Sharif (2013) Solid phase transformation of carbamazepine-fumaric acid cocrystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamed Fareez, Jafri (2012) Synthesis of biopetrol from rubber seed oil using zeolite catalyst using cracking process. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohammad, Nasir and Gupta, Arun and M. D. H., Beg and Chua, Gek Kee and Jawaid, Mohammad and Kumar, Anuj and Ahmed Khan, Tanveer (2013) Fabricating Eco-friendly Binderless Fiberboard from Laccase-treated Rubber Wood Fiber. BioResources, 8 (3). pp. 3599-3608. ISSN 1930-2126 (print); 1930-2126 (online)

Mohammad Aizzat, Nawi (2013) Separation of xylose from glucose-xylose solution using ion exchange resins. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Aizzat, Nawi (2013) Separation of xylose from glucose-xylose solution using ion exchange resins. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Amirul, Mohd Yusof (2014) Synthesis and performances of polyamide forward osmosis membrane for humic acid removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Amirul, Mohd Yusof and Mazrul Nizam, Abu Seman (2015) Polymide Forward Osmosis Membrane: Synthesis, Characterization, and its Performances for Humic Acid Removal. In: 5th International Conference on Environment 2015, 18-19 August 2015 , Penang, Malaysia. pp. 1-10.. (Unpublished)

Mohammad Amirul, Mohd Yusoff and Mazrul Nizam, Abu Seman and Nidal, Hilal (2016) Development of Polyamide Forward Osmosis Membrane for Humic Acid Removal. Desalination and Water Treatment, 57 (60). pp. 29113-29117. ISSN 1944-3986

Mohammad Fairuz, Mohammad Naffekyudin (2010) Preparation & characterization of co/zn catalyst, SBA-15 supported for fisher tropsch synthesis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohammad Farhan, Othman (2012) Analysis and prediction of micro injection molding part using moldflow simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Firdaus, Sahda (2015) Development of equilibrium model of vacuum distillation for benzene/toluene separation using mosaic software. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Hafizezazmi, Ajamain (2015) Pressure drop of different flow pattern in multiphase flow system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Hafizuddin, Mohd Yusoff (2015) Biomass thermal pre-treatment for co gasification: CO2 torrefaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Khairulnizam, Ibrahim (2013) Development of the small scale piston type briquetting tool. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammad Razif, Abdul Rahman (2011) Investigating the effect of solid powder particle size on the turbulent multi-phase flow in pipelines. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohammad Zuhaili, Yahya and Norhayati, Abdullah (2016) Development of Hypercrosslinked Hydrophilic Polymer using Dispersion Polymerization Technique for Separation Process. Journal of Malaysian Critical Metals, 1 . pp. 31-39. ISSN 0128-2557

Mohammad Zulhilmi, Jamal (2010) Accelerate the reduction of palm oil mill effluent critical parameters with biological treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammed, Ausama A. and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physico-chemical Study of Eco-friendly Sugar Palm Fiber Thermoplastic Polyurethane Composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online)

Mohammed, Nasir and Gupta, Arun and M. D. H., Beg and Chua, Gek Kee and Kumar, Anuj (2013) Fabrication of Medium Density Fibreboard from Enzyme Treated Rubber Wood (Hevea brasiliensis) Fibre and Modified Organosolv Lignin. International Journal of Adhesion & Adhesives, 44 . pp. 99-104. ISSN 0143-7496

Mohammed, Nasir and Gupta, Arun and M. D. H., Beg and Chua, Gek Kee and Mohd, Asim (2014) Laccase Application in Medium Density Fibreboard to prepare a Bio-composite. RSC Advances . ISSN 2046-2069

Mohammed, Nasir and Othman, Sulaiman and Rokiah, Hashim and Hossain, Kaizar and Gupta, Arun and Mohd, Asim (2015) Rubberwood Fiber Treatment by Laccase Enzyme and Its Application in Medium Density Fiberboard. Journal of Pure and Applied Microbiology, 9 (3). pp. 2095-2100. ISSN 0973-7510

Mohana, Muniapan (2013) Effect of Enzyme Concentration and Temperature on Viscosity and Betacyanin Content From Pitaya Waste Extract. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd 'Afif, Abd Aziz (2010) Optimization of molding parameter effect to warpage and shrinkage of laboratory goggle based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Addli, Suhaimi (2009) Concentration of biopetrol synthesized from palmitic acid through catalytic cracking using zeolite as catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aedlan, Nur Ahmad (2012) Esterification of Acrylic Acid With 2-Ethyl Hexanol Over Sulfated Ferum Promoted Zirconia. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Affandi, Mohd Ali and Jolius, Gimbun and C. K., Cheng and M. Y., Rosli (2015) Optimization of Waste Cooking Oil Transesterification in a Continuous Microwave Assisted Reactor. Chemical Engineering Transactions, 45 . pp. 1279-1284. ISSN 2283-9216

Mohd Affandi, Mohd Ali and Jolius, Gimbun and C. K., Cheng and M. Y., Rosli (2015) Waste Cooking Oil Transesterification using Continuous Microwave Assisted Reactor (CMAR). In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 269-273. ISBN 978-967-0257-53-2

Mohd Afiq, Mohd Salleh (2008) Functional group characterisation and comparative study of natural herbs extraction oil aleurites moluccana, cinnamon zeylinicum, myristica fragrans, piper nigrum with zea mays, and elaeis guineensis jacq. oil. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Aizuddin, Ab Razak (2010) Modification of coir fiber as polymer reinforcement. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Aizudin, Abd Aziz (2006) Extraction of nigella sativa using modern hydrodistillation technique. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Mohd Alias, Ahmad (2012) Synthesis, characterization and catalytic activity of Ni supported on bleaching clay. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Aliff, Mohd Radzi (2009) Design and analysis of two plate mold insert for dog bone specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amin, Adrah (2010) Simultaneous removal of copper and lead from an aqueous solution using low-cost adsorbents. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Amirul Asyraf, Ahmad (2010) Production of biogas from poultry manure. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Amirul Asyraf, Ahmad (2014) Chemical equilibrium and kinetic study of the esterification of pure and deluted acrylic acid with 2 ethyl hexanol catalysed by amberlyst 15. Masters thesis, Universiti Malaysia Pahang.

Mohd Amirul Hafiza, Che Adul Aziz (2006) Solvent extraction of oleoresins from vanilla plant (vanilla planifolia andrews) bu using soxhlet extractor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aqiel, Mohd Hashim (2014) Esterification of free fatty acids in simulated cooking oil using sulphuric acids as catalyst: - pre-treatment of feedstock for biodiesel production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ariff, Kamali (2010) Removal of Heavy Metal from Industrial Wastewater Using Ultrasonic Assisted By Tea Waste As Adsorbent. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Ariff, Mohd Nor (2009) Influence of reaction temperature and mixing intensity on fructo-oligosaccharides production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ashraf, Che Mat (2010) Recovery of silver from photographic waste: electrolysis behavior. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Asyrak, Deraman (2012) Banana peels as an alternative source of sugar production. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Azim, Abdul Rahman (2008) Partial purification of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. TS1-1. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad (2008) Batch ethanol fermentation using glucose derived from tapioca flour starch by Saccharomyces Cerevisiae for effect of temperature and agitation rate. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad (2012) Investigating the Performance of OKRA - Natural Mucilage Compounds as Flow Improver in Pipelines Carrying Liquid – Solid Solution. Masters thesis, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad and Norazura , Ismail and Mohamad Rizza, Othman (2016) An Analysis of Dust Explosion Incidents in Industries and Mitigation Best Practices within Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 483-489..

Mohd Azlan, Mat Ali (2008) Monitoring of quallity of essential oil from Etlingera SP.5 (Zingeberaceae) by GC/MS &GC - FID. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azri, Ahmad (2010) Measure color stability of red cabbage using different solvents. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Azwan, Mohd Saderi (2012) Biopetrol synthesized from rubber seed oil by zeolites catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Azzarudin, Zailani (2010) Development and characterization of sulfonated polyethersulfone membrane for proton exchange membrane fuel cell application. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2012) Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/ Epoxidized Natural Rubber Blends. Journal of Elastomers & Plastics, 46 (4). pp. 338-354. ISSN 0095-2443 (print); 1530-8006 (online)

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2014) Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/Natural Rubber Nanocomposites. Journal of Reinforced Plastics and Composites, 32 (21). pp. 1656-1667. ISSN 0731-6844 (print); 1530-7964 (online)

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2014) Melt Blends of Poly(lactic acid)/Natural Rubber and Liquid Epoxidised Natural Rubber. Journal of Rubber Research, 17 (2). pp. 57-68. ISSN 1511-1768

Mohd Dzulkiflee, Hamzah (2012) Study on Compatibilization of Recycled Polypropylene/ Polyethylene Terephthalate Blend From Coastal Plastic Waste Using Maleic Anhydride. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fadli, Abdullah (2006) The production of extracellular protease using bacillus subtilis : effect of temperature and agitation speed. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fadzli, Yaaccob (2010) Effects of process parameters on recovery of base oil from spent lubricants using solvent extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Fairuz, Mohd Jais (2010) Energy conservation & economic analysis for production of 50 000 mt/annum isobutylene plant using pinch analysis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Faisal, Ahmad Shafawi (2010) Effect of carbon black loading on the mechanical properties of rubber vulcanizates. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faiz, A. Razak (2013) Influence of biodiesel formulation and blending to fuel properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Ali (2015) Development of mucoadhesive biopolymers for food formulation. PhD thesis, University of Birmingham.

Mohd Faizan, Jamaluddin (2009) Fabrication and characterization of composite biodegradable films from chitosan and corn silk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizan, Jamaluddin (2013) Isolation and identification of acetic acid producer from soil using banana stem waste as a substrate. Masters thesis, Universiti Malaysia Pahang.

Mohd Faizan, Jamaluddin and Jailani, Salihon and N., Zainol (2011) Factorial Analysis on Acetic Acid Production Using Banana Stem Waste. International Journal of Chemical and Environmental Engineering .

Mohd Faizan, Jamaluddin and N., Zainol (2012) Isolation and Identification of Acetic Acid Producer from Mixed Culture of Soil and Banana Stem Waste in Anaerobic Condition. International Journal of Chemical and Environmental Engineering, 3 (2). pp. 15-18. ISSN 2078-0737

Mohd Farid, Ishak (2008) Isolation, characterization and identification of microbes in biofertilizer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faridhwan, Mohamad Zulkapli (2013) Dynamic model of co2 removal using aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faris, Mustafa and Noor Asma Fazli, Abdul Samad and Kamarul, Asri Ibrahim and Norzana, Ibrahim and Mohd Kamaruddin, Abd Hamid (2014) Energy Efficient Distillation Columns Design For Retrofit NGLs Fractionation Process. INTERNATIONAL CONFERENCE ON GLOBAL SUSTAINABILITY AND CHEMICAL ENGINEERING (ICGSE) 2014 .

Mohd Faris, Mustafa and Noor Asma Fazli, Abdul Samad and Kamarul Asri, Ibrahim and Mohd Kamaruddin, Abd Hamid (2014) Methodology Development for Designing Energy Efficient Distillation Column Systems. Energy Procedia, 61 . pp. 2550-2553. ISSN 1876-6102

Mohd Faris, Mustafa and Noor Asma Fazli, Abdul Samad and Norazana, Ibrahim and Kamarul Asri, Ibrahim and Mohd Kamaruddin, Abd Hamid (2014) Optimal Synthesis of Energy Efficient Distillation Columns Sequence of Natural Gas Liquids. In: Regional Conference on Chemical Engineering 2014, 2-3 December 2014 , Yogyakarta, Indonesia. pp. 1-11..

Mohd Fathi, Muhammad (2009) Zn3(btc)2 as adsorbent for gas carbon dioxide and methane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fazwan, Ishak (2012) Analysis of diesel spray characteristic using single hole SAC nozzle and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Che Ismail (2010) Enhancement of carbon dioxcide (CO2) removal process in liquefied natural gas (LNG) production system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mustakim (2009) Soxhlet extraction of ascorbic acid from guava. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Sudeerman (2010) Degradation of nickle from electroplating wastewater by using ultrasonic assisted extraction in addition of HCL. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Firdaus, Hashim (2010) Effects of variables on bipolymer production in 20l batch stirred tank fermentations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang .

Mohd Fouzzi, Mohd Jabar (2010) Characterization and antimicrobial analysis of rice starch-chitosan blend biodegradable film with addition of cinnamon essential oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fuad, Che Nordin (2010) Heat integration analysis of gas to liquid (GTL) process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Ghadafi, Ismail (2008) Biodiesel production from waste cooking oil via single steps tranesterification process with the aid of sodium methoxide as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Ab Majid @ Aziz (2011) Glucose production from oil palm trunk. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hafiz, Kamaludin @ Yusof (2009) Preparation of biodiesel from RBD palm oil and WCO via alkaline transesterification process with the aid of NaOH as catalyst by batch process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Mohd Azlan (2009) Effect of size particle on palm oil waste for production of bio oil through batch pyrolysis processing. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin (2012) Characterization of biodiesel as a fuel in a compression ignition (CI) engine with additives. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53 . pp. 701-706. ISSN 1877-7058

Mohd Hafizuddin, Shahrin (2010) The effect of char particle size on the efficiency of solid-vapor separation in a fast pyrolysis cyclone system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hafizuddin, Zahari (2012) Production and separation of glucose from cellulose hydrolysates using membrane reactor. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hafizul, Md Jais (2010) Effect of carbon dioxide (CO2) suppression on explosive limits of methane. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hafizul, Md Jais (2010) Effect of carbon dioxide (CO2) suppression on explosive limits of methane. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hanafi, Sulaiman (2009) Gas dehydration using glycol solution in absorption and adsorption unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Mohd Said (2010) Removal of heavy metal from industrial wastewater by precipitation,coagulation and flocculation processes. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hasbi, Ab. Rahim and Forde, Michael M. and Hammond, Ceri and Jenkins, Robert L. and Dimitratos, Nikolaos and Lopez-Sanchez, Jose Antonio and Carley, Albert F. and Taylor, Stuart H. and Willock , David J. and Hutchings, Graham J. (2013) Systematic Study of the Oxidation of Methane Using Supported Gold Palladium Nanoparticles Under Mild Aqueous Conditions. Topics In Catalysis, 56 . pp. 1843-1857. ISSN 1572-9028

Mohd Hasbi, Ab. Rahim and Forde, Michael M. and Jenkins, Robert L. and Hammond, Ceri and He, Qian and Dimitratos, Nikolaos and Lopez-Sanchez, Jose Antonio and Carley, Albert F. and Taylor, Stuart H. and Willock, David J. and Murphy, Damien M. and Kiely, Christopher J. and Hutchings, Graham J. (2012) Oxidation of Methane to Methanol with Hydrogen Peroxide Using Supported Gold–Palladium Alloy Nanoparticles. Angewandte Chemie International Edition, 52 (4). pp. 1280-1284. ISSN 1521-3773

Mohd Hasbi, Ab. Rahim and Paroo Indran, Vidhyaa and Zuhaimi, Nor Ain Syuhada and Deraman, Mohd Asyrak and Mashitah, M. Y. and Gaanty Pragas, Maniam and Taufiq Yap, Yun-Hin (2014) An accelerated route of glycerol carbonate formation from glycerol using waste boiler ash as catalyst. RSC Advances, 4 . pp. 25257-25267.

Mohd Hasrul, Yaakob (2012) The effects of process parameters on concentration of pineapple fruit juice via freeze concentration technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hassan, Mohd Shuib (2006) The effect of pH and biomass concentration on cadmium (Cd) uptake by saccharomyces cerevisiae from simulated waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hazwan, Mohamad Shayuti (2010) Removal of phenol from aqueous solution by dried water hyacinth(Eichhornia Crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hidayat, Hashim (2010) Biopetrol synthesized from palmitic acid-heterogeneous catalytic cracking by granular metal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hilmi, Jaafar (2010) Determination of heavy metal accumulation in ipomoea aquatica using wet destruction method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hishafi, Husin (2009) Scale up of biopolymer (PHB) fermentation from shake flask to 10L stirred tank fermenter and optimization of levels of variables at 10L. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hisyam, Yusop (2006) Production of bio-ethanol from biomass waste (sugarcane). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Iezany, Rosli (2013) Enhancing the efficiency process for separation of dry shell and palm kernel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ikhwan, Mohd Rasid (2010) Production of biodiesel from jatropha oil using phase boundary catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Izwan, Mohd (2009) Permeability and selectivity of hybrid membrane (PES/PSU) for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Izwan, Zaman (2010) Effect of Ipomoea aquatic/ Ipomoea reptans (kangkung) on wastewater quality from oil palm production. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Izzat Fida'iy, Mohamed (2010) Production of virgin coconut oil (VCO) via water soluble and centrifugation methods. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Khairi Azri, Shapie (2013) The study of laser drilling of polymeric material. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Khairof Fais, Abd Raop (2007) Polypropylene (PP) reinforced with recycle polyethylene terephthalate (PET) as an alternative material for new plastic product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul, Anwar Mamat (2012) Effect of different inorganic filler on development of polyethersulfone mixed matrix membranes for 02/N2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Afizan, Harun (2009) Separation of fructosyltransferase using ultrafiltration membrane : effect of pH and ionic strength on flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Anwar, Md Nor (2013) Extraction of bioactive compound from pulp and roots of benincasa hispida a.k.a. kundur. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Nizam, Baharudin (2012) Study the Reaction Mechanism of The Production of Novel Biopolymer [Poly (3-Hydroxybutyrate) (PHB)] from the Palm Oil Seed. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Madzuan, Abdullah (2010) Biodegradable behavior of coconut husk (coir) fiber reinforced starch bio-composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Mazlan, Mohamed (2010) Isolation Of ß-Lactoglobulin and a-Lactalbumin from whey. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Mizuan, Omar (2013) An investigation of using moringa oleifera seeds oil as lubricant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Najib, Razali (2011) Adsorption treatment of monoethanolamine (MEA) wastewater from oil and gas industry. Masters thesis, Universiti Malaysia Pahang .

Mohd Najib, Razali and N. Adilah, Salehan and Said, Nurdin and Yvain, Chong Hon (2014) Development of Emulsified Wastewater Treatment System. In: International Conference on Advanced Technology and Sciences 2014, 12-15 August 2014 , Anatalya, Turkey. .

Mohd Najib, Razali and Siti Zulaikha, Isa (2014) Kinetic Study on Adsorption of Monoethanolamine (MEA) Wastewater Treatment Using Activated Carbon, Chitosan and Rice Husk via Batch Process. In: International Conference on Chemistry and Environmental Science Research (ICCESR 2014), 17-18 September 2014 , Penang. . (Unpublished)

Mohd Najib, Razali (2006) The extraction of orthosiphon stamineus using hydro distillation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Najib, Razali and M. Luqman Hakim, M. Effendi and Musfafikri, Musa and M. Y., Rosli (2015) Formulation of Bitumen from Industrial Waste. In: 17th International Conference on Chemical Engineering (ICCE 2015), 27-28 October 2015 , Yogyakarta, Indonesia. . (Unpublished)

Mohd Najib, Razali and Mohammad Hafizuddin, Hambali and M. Y., Rosli (2016) Recovery of Base Oil from Waste Sludge Using Ultrasonic Solvent Extraction Method. In: The 5th International Renewable Energy and Environment Conference (IREEC-2016), 11-13 July 2016 , Madrid, Spain. pp. 1-7.. (Unpublished)

Mohd Najib, Razali and Muhamed Yusuf, Shahul Hamid and Abd. Aziz, Mohd Azoddein (2016) Recovery of Mineral Oil from Waste Emulsion using Electrocoagulation Method. MATEC Web of Conferences, 38 (03005). pp. 1-7. ISSN 2261-236X

Mohd Nashriq, Nasharudin (2008) Patchoili oil extraction using ultrasonic extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nasri, Md Salim (2009) Effect of dimensional parameters on warpage of injection-molded plastic part using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohd Nasrul, Yaakop (2008) Preparation of biodiesel from RBD palm oil via single step transesterification process with the aid of ultrasonic irradiation and (NaOh) as catalyst. Faculty of Chemical and Natural Resources Engineering , University Malaysia Pahang .

Mohd Nasrul Mahmudi, Mahmud (2009) Optimization of molding parameter effect to warpage of car bumper based on plastic flow simulation software. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Nazri, Ismail (2009) Effects of materials selection on injection moulding parameters using moldflow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazri, Noordin (2009) Sink marks defect on injection molding using different raw materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazri, Hassan (2006) The extraction of antioxidant from soybean. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nor Firdaus, Mohd Salleh (2008) Studying the effect of mixing miscible hydrocarbon components on the multi-stage distillation operation compared with single component distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Norawi, Mohd Azrul Hisyam (2006) Adsorption separation of heavy metals from simulated waste water using orange waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Norhafizi, Rohaizat (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software: handphone casing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qamaruddin, Ahmad (2009) Catalytic conversion of RBD palm oil to fuel : the effect of silica-alumina ratio in ZSM-5. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Rozihad (2008) Ultrasonically-assisted production of biodiesel from waste cooking oil (WCO). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Rashidi, Maarof (2015) Effect of magnesium addition on the microstructure and properties of ductile Ni-resist alloy using in-mould magnesium treatment method. PhD thesis, Universiti Teknologi Malaysia.

Mohd Rasidi, Rasol (2012) Screening of factors for biodelignification of oil palm trunk using pleurotus ostreatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Razman, Fadzil (2010) Comparative study on the extraction of β-carotene in the flesh and peel of papaya. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Ridhwan, Md Deros (2008) Production and characterization of extraction oil from natural spices : a comparison study with functional group content of Zea May and Elaeis Guineensis jacq. oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ridzuan, Azis (2012) Synthesis and Characterization of Sba-15 and Cu/Sba-15 Catalysts for Photoreduction of Carbon Dioxide. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Rizauddin, Deraman (2015) Synthesis and characterization of platinum doped titania and silver doped titania for photo-catalytic degradation of pre-treated palm oil mill effluent. Masters thesis, Universiti Malaysia Pahang.

Mohd Rizuwan, Abd Wahab (2010) Designing of manifold system for LPG and industrial gas at FKKSA'S laboratory. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Rohaizam, Mohd Sidek (2012) Solid Phase Transformation and Stability of Carbamazepine-adipic Acid Co-Crystal. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Roslan, Maarof (2010) A removal of impurities using hybrid membrane from POME (palm oil mill effluent). Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Mohd Rusllim, Mohamed and Hamzah, Ahmad and Mazrul Nizam, Abu Seman (2013) Estimating the State-of-Charge of All-Vanadium Redox Flow Battery using a Divided, Open-circuit Potentiometric Cell. Electronics and Electrical Engineering = Elektronika ir Elektrotechnika, 19 (3). pp. 37-42. ISSN 1392-1215 (print); 2029-5731 (online)

Mohd Ruzaini, Ariffin (2012) Ultrasonic assisted transesterification of palm oil with methanol using barium oxide as catalyst. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Sabri, Mahmud and Parthiban, Sandaray and Said, Nurdin and Zahira, Yaakob (2015) Flooding Possibility in Two-Immiscible-Liquid System of Enzymatic Biodiesel Synthesis. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology, 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 370-373..

Mohd Saifol, Ishak (2008) Determination of explosion parameters of LPG-air mixtures in the closed vessel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Saifulnizam, Awang Jaafar (2010) Reduction of Fe(ii) and Zn(ii) using fresh eichhornia crassipes. Faculty of Chemical Engineering & Natural Resources , Universiti Malaysia Pahang .

Mohd Shafiq, Mohd Sueb (2012) Efficient cultivation of Kluyveromyces Lactis in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia.

Mohd Shafiq Azrul, Azmi (2013) A study of dynamic characteristics for crack identification. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahimie, Selamat (2010) Modelling of hydrodynamics in heterogeneous bubble column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Mustafa@Sulaiman (2010) Optimization of sugar production from cassava residue using response surface methodology. Faculty of Chemical Engineering and Natural Resource, Universiti Malaysia Pahang.

Mohd Shaifol, Hamid (2010) Mechanical properties of poly (lactic acid) (PLA)/clay nanocomposite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Shaiful Azman, Abdul Rahim (2010) Screening and optimisation study on antioxidant extracts from selected lamiaceae plants. Masters thesis, Universiti Malaysia Pahang.

Mohd Shaiful Zaidi, Mat Desa and Azman, Hasan and Agus, Arsad and Nor Nisa, Mohammad (2014) Mechanical and Thermal Properties of Rubber Toughened Poly(lactic Acid)/ Multiwalled Carbon Nanotubes Nanocomposite. In: The 2nd International Conference on Bio-Based Polymers and Composites, 24-28 August 2014 , Visegrád, Hungary. .

Mohd Shaiful Zaidi, Mat Desa and Azman, Hassan and Agus, Arsad and Reza, Arjmandi and Nor Nisa Balqis, Mohammad (2016) Influence of Rubber Content on Mechanical, Thermal, and Morphological Behavior of Natural Rubber Toughened Poly(Lactic Acid)-Multiwalled Carbon Nanotube Nanocomposites. Journal of Applied Polymer Science, 133 (48). p. 1. ISSN 1097-4628

Mohd Shariff, Azmi and Abdul Aziz, Hanida and Abdul Majid, Noor Diana (2016) Way Forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14 . pp. 56-60. ISSN 2211-3398

Mohd Suhaimi, Mohd Noor (2010) Optimization of xylose production from rice straw using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Sukairi, Mas Hassan (2008) Batch ethanol fermentation using glucose desired from tapioca flour starch by Saccharomyces cerevisiea effect of inoculum age and agitation speed. Faculty of Chemical Engineering and Natural Resource , University Malaysia Pahang .

Mohd Syahmi, Mohd Nong (2013) A new material supply mechanism for plunger type injection molding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Syahmi Hafizi, Ghani (2015) Development of hot melt ethylene vinyl acetate (EVA) adhesive for packaging industry. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syahrul Ridhwan, Abdullah (2011) Optimization of glycerol recovery on effect of waste volume and ph using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Syakirin, Zulkarnain (2013) Simulation and Environmental Assessment of Biodiesel Using Supercritical Methanol. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syazali, Mohd Arif (2013) Process improvement on fish cleaning in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Syazwan, Zulkipli (2012) Development of a new type of sprayer head of a water mist system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufik, Dailami (2009) Production of dragon fruit powder using spray drying method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Taufik, Mohamd Tahir (2009) The production of bio oil through batch pyrolsis process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Rasdi (2013) Scale up study on production of biodiesel from Jatropha crude oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Thorik Firdaus, Abdul Kadir (2010) Extraction of mangrove component for isolation of triterpenoid saponins via ultrasonic extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Usman, Mohd Junaidi (2010) Simulation of reactive distillation for biodiesel production from Jatropha Curcas seed oil. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Waqiyuddin, Mohd Salleh (2010) The effect of carbon black loadings on tensile strength of rubber vulcanizates. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Yusnizam, Yusof (2008) Effects of ph in mercury nitrate treatment using membrane system with biological pretreatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Zahiruddin, Azri (2009) Optimization of molding parameter effect to warpage of car dashboard based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohd Zairie, Mohd Yusuff (2010) Industrial detergent wastewater treatment via fenton reagent. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Zamri, Zainuddin (2009) Biosorption of chromium (VI) from aqueous solution by dried water hyacinth (Eichhornia crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Zoehdi, Ramli (2009) Adsorption of natural gas and hydrogen on Cu3(btc)2. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Mohd Zulkifli, Mohamad Noor and Iqbal, Ahmed and M. Y., Rosli Hybrid Blo-Membrane Contractori For Refinery Waste Water Treatment. Hybrid Blo-Membrane Contractori For Refinery Waste Water Treatment . (Unpublished)

Mohd. Faisal, Sulong@A Rashid (2006) Extraction of essential oils from jasmine flower using solvent extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Hafiz, Mohamed (2009) The effect of inorganic solid particles on water and crude oil emulsion stability. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Kamirul Nizam, Ngah@Omar (2006) The effect of pH and biomass concentration on lead (Pb) adsorption by Saccharomyces cerevisiae from simulated waste water. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Mohd. Khairi, Kamarudin (2010) The effect of adsorbent additive on clay based adsorbent to the removal of a single dye system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd. Nazip, Kassebullah (2006) Production of cellulase enzyme from Aspergillus terreues SUK-1 using sugar cane waste : the effect of substrate concentration and assay temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Rosli, Ramly (2006) Extraction of gaharu essential oil using microwave assisted extraction (MAE). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Saiful , Mohd. Sahak (2010) Symbion dedah kesedaran bioteknologi. Utusan Malaysia .

Mohd.Khairul Anuar, Samsudin (2010) Elucidation of the mechanism of enzymatic browning inhibition of the sap from oil palm trunk by chemical method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd.Raflie , Maslih (2010) Selective recognition of bovine serum albumin (BSA) using molecular imprinting polymer technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohib Reza, Kazimi and Saidatul Shima, Jamari and C. K. M., Faizal and Tahir, Shah (2014) Characterization of Functionalized Low Density Polyethylene/Polyaniline Nano Fiber Composite. Journal of Medical and Bioengineering, 3 (4). pp. 306-310. ISSN 2301-3796

Morina, Mohd Selih (2012) Optimization of statin (Simvastatin) by monascus Purpureus FTC 5356 in solid-state fermentation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mughirah, Abdullah (2008) Biodiesel fuel from waste cooking oil & RBD palm oil via transesterification reaction with the aid of sodium methoxide, methanol, and ultrasonic reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad, N. and Mashitah, M. Y. and Jolius, Gimbun (2015) Thermal Degradation Kinetics of Nicotinic Acid, Pantothenic Acid and Catechin Derived from Averrhoa bilimbi Fruits. RSC Advances, 5 (90). pp. 74132-74137. ISSN 2046-2069

Muhamad Akmal, Muhamad Yusuf (2013) 3D design of heterogeneous catalytic biodiesel reactor and its plant using Aveva PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Aliff, Ramli (2012) Purification of fructosyltransferase (FTase) from Aspergillus Niger to enhance production of Fructooligosaccharides (FOS) as a food additive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Azhar, Azman (2010) Elimination of H2S from chicken manure by reaction with H2O2 & titrating with KMnO4. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhamad Faruqi, Zahari and M. S., Najib and Kamarul Hawari, Ghazali and Fathimah, Abdul Halim and Abd. Aziz, Mohd Azoddein (2016) Classification of Ammonia in water for Oil and Gas Industry using Case Based Reasoning (CBR). Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (7). pp. 34-37. ISSN 2462-2303

Muhamad Fridy Nizam, Harun (2007) Investigation and analysis of finding the injection molding gate by using moldflow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hadi, Sulaiman (2013) Solvent screening study of carbamazepine crystal polymorph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Hafiz, Halim (2010) Biosorption of ferrum (II) from industrial wastewater by using water spinach (Ipomoea aquatica). Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Muhamad Hisyam, Zakaria (2015) Methane dry reforming over Ce-promoted Ni/Al2O3 catalyst : kinetic studies. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Hisyamuddin, Jaffar (2013) Analysis on the performances of autoclaved aerated concretes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Kahfi, Abdullah (2008) Extraction of gaharu oil using enzymatic hydrodistillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Naim, Saad (2015) Comparison of moringa oliefera seed oil characterization produced by chemical and mechanical method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Moza, Muhamad Mohtar (2012) Maximizing Paper Fibre Recovery Using Property Cascade Analysis Technique. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Shahir, Hasan (2010) Synthesis and swelling behavior of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhamad Syafiq Eidham, Ab Rashid (2012) Production of extracellular tannase enyzme by Aspergillus Niger. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Syukri, Shalihuddin (2010) Experemental study of hydrogen peroxide/methane combustion. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhamad Yasin, Ismail (2009) Biological nutrient removal using sequencing batch bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Zahrul, Ghazali (2012) Transesterification of palm oil with methanol using barium oxide. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Zulhelmi, Mohamad Fithol (2009) Application of experimental design for photodegradation of rose bengal (acid red 94). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad khuzaifah, Mustakim (2008) Patchouli oil extraction by using hydro distillation (lab scale). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad, Khan and Norasyidah, Harun and Azhari, H. Nour and Elhussein, Salah A. A. (2013) In Vitro Antioxidant Evaluation of Extracts of Three Wild Malaysian Plants. Procedia Engineering, 53 . pp. 29-36. ISSN 1877-7058

Muhammad, Shahid Ali Wafa and Jolius, Gimbun and C. K., Cheng and Said, N. (2013) Enhancement of Biodiesel Yield from High FFA Malaysian Rubber Seed Oil with Sodium Methoxide Treated Limestone. Journal of Engineering and Technology, 4 (1). pp. 123-132. ISSN 2180-3811

Muhammad , Khan (2015) Antioxidant and anti-acetylcholinesterase potential from waste of selected solanaceous plants: isolation and identification of the active compound. PhD thesis, Universiti Malaysia Pahang.

Muhammad 'Afif, Mohamed Azmi (2013) A wavelet analysis for crack location detection on cantilever beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad 'Ammar Shakir, Ishar (2011) Study characteristic of oil-water emulsion fuel for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Affiq Saufi, Nordin (2010) Optimization of extraction of antioxidants from lamiaceae sp. by boiling. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Afiq, Ariffin (2010) Design, construction and commisioning of bioreactor experimental rig to measure kLa of oxigen in newtonian fluid. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Arif, Ismail (2010) Potential natural gas pipe line at Universiti Malaysia Pahang laboratory and residential college unit for future development. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Arshad, Zainol Abidin (2007) Analysis of filling stage for injection molding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Asraf, Abd Rahim (2009) Estimation on gas density internal model control (IMC) controller using partial least squares. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Asyraf, Jusoh (2013) A study on production of emulsified biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Asyraq, Arifin (2009) Experimental study on acid gas removal using absorption-adsorption unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Azlan, Nazeri (2012) Optimization of bacterial cellulose production by using response surface methodology(RSM)effect of PH,temperature and concentration of fermentation medium. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Bilal, Muslim (2014) Extraction of antioxidant from kundur plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Bilal, Muslim and Suriyati, Saleh and Tuan Amran, Tuan Abdullah and Arshad, Ahmad and Noor Asma Fazli, Abdul Samad (2016) Performance Comparison on Biomass Gasification Reactor for Hydrogen Production. In: The 7th International Symposium on Design, Operation and Control of Chemical Processes (PSE ASIA 2016) , 24-27 July 2016 , University of Tokyo, Japan. pp. 1-6.. (Unpublished)

Muhammad Danial, Mazelan (2012) Synthesis and swelling behaviour of bentonite based superabsorbent polymer composite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Daniel, Selamat (2010) Extraction of green pigment from Pandanus Odorus. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Fadhlul Hanin, Ismail (2012) Optimization of Biodiesel Production from Cooking Palm Oil Using Response Surface Methodology (RSM) Approaces. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fais, Haron (2013) Kinetic modeling of transesterification of refined palm oil to produce biodiesel using Strontium Oxide(SrO)as a heterogeneous catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Faisal, Siddiqui (2012) The Anti-Biofouling Effect of Piper Betle Extract on Membrane Biofouling in Bioreactor for Batik Wastewater Treatment. PhD thesis, Universiti Malaysia Pahang.

Muhammad Faizal, Zainal Abidin (2006) The development of home made appratus for the production of biodiesel from new cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fakhrullah, Mohd Nor (2010) Effect of ionic strength on whey protein separation in high performance tangential flow filtration. Faculty of Chemical and Natural Resource Engineering , Universiti Malaysia Pahang.

Muhammad Farhan, Adnan (2013) The effect of temperature on polymethyl methacrylate acrylic (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fauzi, Ibrahim (2009) Production of bioethanol from tapioca starch using Saccharomyces cerevisiae : effects of temperature and agitation speed. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Muhammad Fawwaz, Abdul Wahab (2015) Oil-in-water emulsion technique enhancement for viscous crude oil flow in pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fikri Afiq, Abdul Mutalib (2010) The effect of microwave radiation on biodiesel production. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Firdauz, Ali Sibramulisi (2012) Study on Production of Peg-Pvdf Membrane for Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fitri, Ismail (2010) Pretreatment and separation of crude glycerol from glycerol residue using membrane reactor on effect of trans membrane pressure and cross flow velocity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Haidar, Hussien (2010) Proposed the new design new air and deionized water piping system at FKKSA"s laboratory. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Hairynizam, Muhd Taib and Jolius, Gimbun (2012) Mixing of EFB Fibre - Liquid in Stirred Tank Using Intermig Impellers. In: National Conference on Postgraduate Research (NCON-PGR) 2012 , 8-9 September 2012 , Universiti Malaysia Pahang. .

Muhammad Hanafi , Samihono (2010) Biodiesel production from Jatropha oil by using heterogeneous hydrophobic modified zirconia. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Hashrul Tahpiz, Ibrahim (2015) Formulation, characterisation, and optimization of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hidayat, Musa (2010) Effect of zeolite concentration on development of polyethersulfone mixed matrix membranes (MMMs) for o2/n2 separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Idzwan, Latif (2013) Design and development of mould calculation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Ilham, Miskon (2010) Polypropylene clay nanocomposite :a study of mechanical properties. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Kamal, Jamali (2013) Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Khazrattul, Bani (2008) Design anf development of small DC refrigerator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Lukman, Manshor (2009) The energy recovery from decanter cakes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Mutammimul Ula, W. Abd. Latif (2012) Fixed bed adsorption for wastewater treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Mu’izzuddin, Abd Malek (2015) Optimization of polyphenols encapsulation from Orthosiphon Stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Noor Azreen, Mohd Khairu (2013) Study on Continuous Adsorption Process for Monoethanolamine (MEA) Wastewater Treatment Using Granular Activated Carbon and Sugarcane Bagasse. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Nor Ridzuan, M. Taifor (2013) Development of emulsion fuel mixer system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Norazan , Abu Hassan (2013) Fatty acid of moringa oleifera oil at different sample condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Rashdan, Mohammad Rohizat (2014) Case Study on CFD investigation of dense phase pneumatic conveying at a pipeline enlargement. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Remanul, Islam (2012) Effect of fibre surface treatment on kenaf filled recycled polypropylene composite. Masters thesis, Universiti Malaysia Pahang.

Muhammad Remanul, Islam (2015) Preparation and characterization of palm oil based polyalkyd films and composites with multi-walled carbon nanotubes. PhD thesis, Universiti Malaysia Pahang.

Muhammad Ridhwan, Salman (2015) Estimation of solubility parameter using small and fedors method for ionic liquids. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ridzuan, Kamaruzaman (2011) Isolation of microorganism from oil palm-sap. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Muhammad Ridzuan, Mamat (2013) Utilizing multiple linear regression technique for interential measure of continuous-based process monitoring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Rozainei, Mat Saat (2012) Al2O3 supported alkali metal oxides (LINO3) for transesterification of palm oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Rusydi, Robaie (2012) Production of Polymer Blend from Algae and Polyethylene Blend. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Saad, Khan and Zulkafli, Hassan and Iqbal, Ahmed (2009) Influence of Hydrogen Peroxide On Liquefied Petroleum Gas (LPG) Performance. In: The Proceeding of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 107-133..

Muhammad Safwan, Taharim (2012) Modeling of crude distillation unit (CDU). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Saifuddin, Idris (2008) Extraction of essential oils from jasmine flower using solvent extraction based on petal condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Shahairie, Abdul Razak (2009) Ultrasonic extraction of antioxidant compound from red pitaya. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man (2012) Effect of promoters (Mn, Zn and ZrO2) on the characterization of SBA-15 supported cobalt catalyst for fischer-tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man (2013) Production of Bio-Oil from Empty Fruitbunch (EFB) via Pyrolysis Process. Masters thesis, Universiti Malaysia Pahang.

Muhammad Syadda, Zainol (2010) Microwave assisted extraction of Ceriops Decandra SP. Leaves for hypoglycemic active compounds. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Syafiq, Khirrudin (2012) Production of bacterial cellulose effect of different mediums and modes of operation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syazuwan, Nordin (2015) A CFD simulation study on the effect of velocity and pressure distributions in wet gas metering using slotted orifice flow. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Zaidi, Othman (2010) Effect of fermentation time on butanol and ethanol production from palm mill oil effluent by clostridium acetobutylicum. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Zakwan, A. Razak (2010) Preparation and characterization of cobalt- zinc catalyst SBA 15 supported for fischer-tropsch synthesis: effect on zinc loading. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Zulhilmi, Mohd Ithnin (2012) Feasibility study on the usage of natural gas for electricity supply at Universiti Malaysia Pahang Gambang campus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhd Abd Mursyid, W. Mohd. Saberi (2010) Comparison between mehod of one-factor-at-a-time (OFAT) & design of experiment (DOE) in screening of immunoglobulin production stimulatesing factors. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhd Bashori, Abu Bakar (2008) Production of bioethanol from tapioca starch using saccharomyces serevisiae : effect of inoculum concentration and temperature. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Muhd Zahiruddin, Shukor (2008) Extraction of essential oils from patchouli leaves using ultrasonic - assisted solvent extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mukhlish, M. Zobayer and Khan, M.M.R. and Islam, A.R. and Akanda, A.N.M.S. (2016) Removal of Reactive Dye from Aqueous Solution Using Coagulation–Flocculation Coupled with Adsorption on Papaya Leaf. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1884-1894. ISSN 2289-4659 (print); 2231-8380 (online)

Muna Suhaili, Zakaria (2008) Production of bioethanol from tapioca starch using Saccharomyces cerevisiae : effects of pH and air flow rate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Munirah Ezzah, Tuan Zakaria and Norlirabiatuladawiyah, Che Ani and Saidatul Shima, Jamari and Suriati, Ghazali and Khan, Tanveer Ahmed and Mohd Faizal, Ali (2016) Effect of Mixing towards the Production of Carbonaceous Kenaf Fiber via Hydrothermal Carbonization Process. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 122-127. ISSN 1991-8178

Mupit, Datusahlan (2015) Isolation and identification of lipolytic bacteria from galing river water kuantan to degrade waste cooking oil. Masters thesis, Universiti Malaysia Pahang.

Musfafikri, Musa (2010) Optimization of amylase reaction through design of experiments(DOE). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Musliha, Mohamed (2010) Sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

N

N., Zainol (2011) Screening of Factors Affecting Biological Delignification Process of Oil Palm Trunk Using Local Oyster Mushroom (Pleurotus Ostretus). International Journal of Chemical and Environmental Engineering , 2 (4). ISSN 20780737

N., Zainol and Mohd Faizan, Jamaluddin and Aizawati, Abd. Rahman (2014) Kinetic Study Of Acetic Acid Production From Banana Stem Waste Using Wild Strain Bacillus Thuringiensis Bmb171. Asian Journal of Microbiology, Biotechnology & Environmental Sciences, 16 (3). pp. 529-538. ISSN 0972-3005

N., Zainol and Mohd Faizan, Jamaluddin and R., Abdul-Rahman and N. F., Abdul-Ghaffar and Jailani, Salihon (2014) Comparison Of Anaerobic Lignin Degradation Of Banana Stem Waste Using Mixed Culture From Malaysian Soil And Pure Strains From Soil Culture. Asian Journal of Microbiology, Biotechnology & Environmental Sciences, 16 (3). pp. 551-560. ISSN 0972-3005

N., Zainol and Nina Farhana, Mohd Jamaludin (2014) Factors Analysis on Biomethanation of Poultry Manure Wastewater. International Journal of Applied Environmental Sciences (IJAES), 9 (4). pp. 1663-1672. ISSN 0973-6077 (print); 0974-0260 (online)

N., Zainol and S. N., Ismail (2014) Factorial Analysis of Ferulic Acid Extraction from Banana Stem Waste. International Journal of Applied Engineering Research (IJAER), 9 (20). pp. 6823-6833. ISSN 0973-4562 (print); 1087-1090 (online)

N., Zainol and S. N., Ismail (2014) Optimization Of Ferulic Acid Extraction From Banana Stem Waste. Asian Journal of Microbiology, Biotechnology & Environmental Sciences, 16 (3). pp. 479-484. ISSN 0972-3005

N., Zainol and Sumaiya, Zainal Abidin and Noraziah, Abu Yazid (2014) Industry Involvement In Undergraduate Research Project For Chemical Engineering (Biotechnology) Programme. In: 2014 International Conference on Teaching and Learning in Computing and Engineering, 11-13 April 2014 , Kuching. pp. 196-200..

N., Zainol and Suryati, Mohd Mokhtar (2014) Kinetic Study on Ammonia-N Removal using Soil Mixed Culture. International Journal of Applied Environmental Sciences (IJAES), 9 (4). pp. 1297-1304. ISSN 0973-6077 (print); 0974-0260 (online)

N., Mat Zain and Stapley, A. G. F. and Shama, G. (2014) Green Synthesis of Silver and Copper Nanoparticles Using Ascorbic Acid and Chitosan for Antimicrobial Application. Carbohydrate Polymers, 112 . pp. 195-202. ISSN 0144-8617

N., Shamsinar and Syed Mohd Saufi, Tuan Chik (2015) Adsorptive Cation Exchanger Mixed Matrix Membrane Chromatography for the Isolation of Lysozyme from Chicken Egg White. Arabian Journal for Science and Engineering . pp. 1-7. ISSN 1319-8025 (print); 2191-4281 (online)

N., Zainol and Emine, Seydametova and Jailani, Salihon and Convey, Peter (2015) Mangrove Rhizosphere Soils: A Unique Natural Source of Pravastatin-Producing Penicillium Microfungi. International Journal of Extensive Research, 5 . pp. 79-87. ISSN 2394-0301

N., Zainol and N., Masngut and S. N., Ismail (2016) Effect of Pre-treatment Processes to Ferulic Acid Extraction from Banana Stem Waste. In: The 3rd International Conference on Agricultural and Food Engineering (CAFEI2016), 23-25 August 2016 , The Seri Pacific Hotel Kuala Lumpur. pp. 332-337.. ISBN 978-967-960-401-6

N., Zainol and Nanthienie, Thangaperumal and N. H., Aziz (2016) Kinetic Study on Flooded Soil Recovery Using Soil Containing Arbuscular Mycorrhizal Fungi. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 1-2 May 2016 , Phuket, Thailand. pp. 1-7., 78 (01087). ISSN 2261-236X

N., Zainol and Nanthienie, Thangaperumal and Nur Hanisah, Zahari and Nor Hazwani, Aziz (2016) Factorial Analysis on Flooded Soil Recovery using Soil Containing Arbuscular Mycorrhizal Fungi. In: The 2nd Electronic and Green Materials International Conference (EGM 2016), 1-2 May 2016 , Phuket, Thailand. . (Unpublished)

N. A., Jalanni and M. N., Abu Seman and C. K. M., Faizal (2013) Investigation of New Polyester Nanofiltration (NF) Membrane Fouling with Humic Acid Solution. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 69-72. ISSN 0127-9696 (print); 2180-3722 (online)

N. F. A., Shafie and J. M., Uloi and A. M., Som and N. H., Abdurahman and Zulkafli, Hassan and R. M., Yunus and A., Yahya (2016) The Performance Study of Ultrasonic-Assisted Membrane Anaerobic System (UMAS) in Palm Oil Mill Effluent (POME) Treatment. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 20-26. ISSN 1991-8178

N. Fatihah, M. Roli and Wan Mohd Hafizuddin, Wan Yussof and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman and Abdul W., Mohammad (2015) Synthesis of Nanofiltration Membrane Developed from Different Concentration of Triethanolamine (TEOA) for Separation of Xylose from Glucose. In: International Conference on Environment 2015 (ICENV 2015), 18-19 August 2015 , Eastin Hotel, Pulau Pinang. pp. 1-10.. (Unpublished)

N. H., Abdurahman and Azhari, H. Nour (2013) Performance of Ultrasonic Membrane Anaerobic System (UMAS) in Membrane Fouling Control. International Journal of Engineering Science and Innovative Technology (IJESIT), 2 (6). pp. 480-491. ISSN 2319-5967

N. H., Abdurahman and M., Ghada and Eltohami, M. S. and Mudawi, Mahmoud M. E. (2014) In Vitro Study Of The Effect Of Corn Silk On Glucose Uptake By Isolated Rat Hemi-Diaphragm. World Journal of Pharmaceutical Research (WJPR), 3 (4). pp. 2190-2195. ISSN 2277 – 7105

N. H., Abdurahman and M. Y., Rosli and Azhari, H. Nour (2016) Membrane Anaerobic System (MAS) for Palm Oil Mill Effluent (POME) Treatment. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 11-19. ISSN 1991-8178

N. H., Abdurahman and M. Y., Rosli and Azhari, H. Nour (2016) The Potential of Ultrasonic Membrane Anaerobic System (UMAS) in Treating Slaughterhouse Wastewater. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2653-2659. ISSN 1819-6608

N. H., Abdurahman and M. Y., Rosli and Azhari, H. Nour (2015) Ultrasonic Membrane Anaerobic System (UMAS) Applications Intreating Slaughterhouse Wastewater. Australian Journal of Basic and Applied Sciences, 9 (31). pp. 79-89. ISSN 1991-8178

N. H., Abdurahman and M. Y., Rosli and Azhari, H. Nour and Abdul Adam, Abdullah (2016) The Potential of a Water-in-Diesel Emulsion for Increased Engine Performance and as an Environmentally Friendly Fuel. In: MATEC Web of Conferences: The 3rd International Conference on Manufacturing and Industrial Technologies, 16-18 April 2016 , Bangkok, Thailand. pp. 1-5., 70 (01003). ISSN 2261-236X

N. H., Abdurahman and M. Y., Rosli and Azhari, H. Nour and Hayder A., Abdul Bari (2015) The Potential of Ultrasonic Membrane Anaerobic Systems in Treating Slaughterhouse Wastewater. Journal of Water Reuse and Desalination, 5 (3). pp. 293-300. ISSN 2220-1319

N. H., Abdurahman and M. Y., Rosli and H., Anwaruddin (2007) Water-in-Crude Oil Emulsions: Its Stabilization and Demulsification. Journal of Applied Sciences , 7 (22). pp. 3512-3517. ISSN 1812-5654

N. H., Abdurahman and M. Y., Rosli and Zulkifly, Jemaat (2008) Demulsificaton (Breaking) Of Water-In-Crude Oil Emulsion via Microwave Heating Technology. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 37-46. ISSN 1985-5176

N. H., Abdurahman and Mohd Amirul, Anuar (2015) Biomethanation of Sugarcane Wastewater by Ultrasonic Membrane Anaerobic System (UMAS) to Produce Methane Gas. International Journal of Engineering Sciences & Research Technology , 4 (2). pp. 413-419. ISSN 2277-9655

N. H., Abdurahman and Nitthiyah, Jeyaratnam and Manal, S. Omer (2016) The Potential of Rhizophoramucronata in Extracting the Chemical Composition and Biological Activities as Mangrove Plants: A Review. Australian Journal of Basic and Applied Sciences, 10 (4). pp. 114-139. ISSN 1991-8178

N. H., Abdurahman and O. A., Olalere (2016) Taguchi-Based Optimization Technique in Reflux Microwave Extraction of Piperine from Black Pepper (Black Pepper (Piper nigrum). Australian Journal of Basic and Applied Sciences, 10 (9). pp. 293-299. ISSN 1991-8178

N. H., Abdurahman and Olalere, O. A. (2016) A Comparative Review Of Conventional And Microwave Assisted Extraction In Capsaicin Isolation From Chili Pepper. Australian Journal of Basic and Applied Sciences, 10 (10). pp. 263-275. ISSN 1991-8178

N. H., Abdurahman and Priya Dharshini, Chandra (2015) Biomethanation of Palm Oil Mill Effluent (POME) by Ultrasonic-Assisted Membrane Anaerobic System (UMAS). International Journal of Engineering Sciences & Research Technology , 4 (2). pp. 1-9. ISSN 2277-9655

N. H., Abdurahman and Ranitha, Mathialagan and Azhari, H. Nour and Ahmad Ziad, Sulaiman (2013) Extraction and Characterization of Essential Oil From Lemongrass (Cymbopogon Citratus) by Microwave-Assisted Hydrodistillation. In: Proceedings of International Conference on Enviromental Protection and Renewable Energy, 6-10 September 2013 , Pattaya, Thailand. pp. 175-161..

N. I. A.A, Nordin and H., Ariffin and M. A., Hasan and N. A., Ibrahim and Yoshihito, Shirai and Y., Andou (2015) Effects of Milling Methods on Tensile Properties of Polypropylene/ Oil Palm Mesocarp Fibre Biocomposite. Pertanika Journal of Science & Technology (JST), 23 (2). pp. 325-337. ISSN 0128-7680

N. Nor, Azaini and N., Masngut (2015) Biobutanol Production in a Mixed Culture System of Clostridium Acteobutylicum ATCC 824 and Bacillus Subtilis DSM 4451. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015), 25-27 Nov 2015 , Langkawi, Kedah. . (Unpublished)

N. S., Nasri and Siti Noraishah, Ismail and U. D., Hamza and M. M., Hamed (2013) Study on the Use and Modification of a Sustainable Solid Waste Material for Carbon Dioxide Capturing. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 555-571..

N. S., Nasri and U. D., Hamza and A., Abdulkadir and Siti Noraishah, Ismail and M. M., Hamed (2013) Utilization of Sustainable Palm Empty Fruit Bunch Sorbents for Carbon dioxide Capture. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 582-587..

Nabilah, Omor (2010) Characterization and antimicrobial analysis of cassava starch- chitosan blend biodegradable film with addition of black cumin oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadarajan, Ramanan (2013) Title production and characterization of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadia, Salleh (2012) Extraction performance study of gaharu using microwave extraction method. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nadia Aida, Che Mustapa (2012) Effect of Cobalt and Zinc Precursor Loading on the Catalyst Activity of Fischertropsch Synthesis. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nadiah, Zainuldin (2010) Selective separation of phenolic compound using molecular imprinting technique for solid phase extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nadiah, Zainuldin (2010) Selective separation of phenolic compound using molecular imprinting technique for solid phase extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nadira Atiliya, Abdul Rahim (2014) Synthesis and characterization of forward osmosis membrane for drinking water application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadzirah, Yahya (2010) Transesterification of palm oil using tungstated zirconia. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nadzirah Nadia, Mohd Razif (2009) Lignin degradation of banana stem waste using Streptomyces badius. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nafsiah , Hussain (2008) Factor analysis of fermentation for the production of biopolymer in shake-flasks. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nahdiyyah, Rosslan (2013) Inoculum development in 2L stirred tank fermenter for production of PHB biopolymer in a 20 L stirred tank fermentation on a medium of oil palm frond juice (OPFJ). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Najmuldeen, Ghazi Faisal and Al Ezzi, Ali Abdul Rahman (2015) Application of a Novel Design for Air Lift Reactor In Waste Water Treatment. International Journal of Scientific Research in Science, Engineering and Technology, 1 (1). pp. 1-7. ISSN 2395-1990

Najmuldeen, Ghazi Faisal and G. G., Faisal and S. M., Zakaria (2015) In Vitro Antibacterial Activity of Eurycoma Longifolia Jack (Tongkat Ali) Root Extract. The International Medical Journal Malaysia, 14 (1). pp. 77-81.

Najwa, Mohd Nor (2008) Preparation of biodiesel from waste cooking oil using single step batch catalyst with the aid of KOH as a catalyst. Faculty of Chemical & Natural resources Engineering, Universiti Malaysia Pahang.

Nallappan, Madana Leela (2011) Development of virgin polypropylene composite by sugarcane bagasse reinforcement. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nasobah, Ahmad (2010) Biodegradable poly (lactic acid)clay nanocomposite by melt intercalation :a study of mechanical properties. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nasratun, Masngot (2013) A study of butanol production in a batch oscillatory baffled bioreactor. PhD thesis, Newcastle University.

Nasuha, Jalil (2010) Cellulose recovery from sawdust : optimization of concentration, pretreatment time and temperature by using response surface methodology. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nawwar Ayuni, Razali (2012) Synthesis of amorphous silica from sugar cane leaf by chemical extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nazrul Shafeeq, Shahadan (2012) Solid phase transformation and stability of carbamazepine-saccharin co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nedunjeliyan, Dinesh Varma (2010) Batch solvent extraction of caffeine from MCBC2. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nedunjeliyan, Dinesh Varma (2010) Batch solvent extraction of caffeine from MCBC2. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Neeta L., Lala and Rajan, Jose and Mashitah, M. Y. and Seeram, Ramakrishna (2012) Continuous Tubular Nanofibers of Vanadium Pentoxide by Electrospinning for Energy Storage Devices. Journal of Nanoparticle Research, 14 . p. 1201. ISSN 1388-0764 (print), 1572-896X (online)

Nezille Izzie, Anak Lahu (2010) Effect of tyoe of solvents on asymmetric polyethersulfone PES) membrane for CO2/H4 separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ng, Wei Chet (2009) Total phenolic and total flavonoids content of pitaya peelss by water extraction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Kim Hoong and C. K., Cheng (2016) Photo-polishing of POME into CH4-Lean Biogas over The UV-Responsive ZnO Photocatalyst. Chemical Engineering Journal . ISSN 1385-8947 (In Press)

Ng, Kim Hoong and Cheng, Yoke Wang and Maksudur, R. Khan and C. K., Cheng (2016) Optimization of Photocatalytic Degradation of Palm Oil Mill Effluent in UV/ZnO system based on Response Surface Methodology. Journal of Environmental Management, 184 (Pt. 3). pp. 487-493. ISSN 0301-4797

Ng, Kim Hoong and Lee, Chea Hui and Maksudur, R. Khan and C. K., Cheng (2016) Photocatalytic Degradation of Recalcitrant POME Waste by using Silver Doped Titania: Photokinetics and Scavenging Studies. Chemical Engineering Journal, 286 . pp. 282-290. ISSN 1385-8947

Ng Wei, Yee (2013) Effect of Sawdust Species and Particle Size on Glucose Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ng Yit Hui, Alicia (2014) Preparation of adhesive using soy protein and lignin. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng,, Ziet Hong (2009) Development of engine management system for modified diesel engine fuelled by compressed natural gas (CNG). Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Ngu Ming, Tiong (2012) Development of an Extractive Reactor Block in the Aspen Plus Simulator. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nguang, Suok Ling and Yeong, Yi Ling and Pang, Sook Fun and Jolius, Gimbun (2017) Ultrasonic Assisted Extraction on Phenolic and Flavonoid Content from Phyllanthus niruri Plant. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Nik Az Amin, Nik Abdul Aziz (2006) Effect of different shear rate on membrane performance on pes asymmetric membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fatihaf, Nek Kamarzaman (2012) Photocatalytic Reduction of Co2 Using Zns Pillaring on Kaolin Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fatima, Nek Kamarzaman (2013) Ultrasonic extraction of Clinacanthus nutans and its antioxidant activity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fazdrul, Nik Hussin (2012) Study on gas flow network analysis at Shah Alam Industrial area by using Cox's method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nik Muhamad Hafizan, Nik Muhamad Zawawi (2010) The effect of carbon black loading on the tensile strength of rubber compound. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nik Nor Aziati, Abd Aziz (2010) Effect of substrate concentration and ph on succinic acid production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Nor Aziati, Abd Aziz (2013) Optimization of pre-treatment process of glycerol residue for succinic acid production. Masters thesis, Universiti Malaysia Pahang.

Nik Nor Aziati, Abdul Aziz and A. M. M., Sakinah (2016) Characterization Of Raw Material (Glycerol Residue) And Escherichia Coli In Immobilized Cell For Succinic Acid Production. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 902-907..

Nik Nor Aziati, Abdul Aziz and A. M. M., Sakinah (2016) Optimization of Succinic Acid from Fermentation Process by Using Immobiized Escherichia Coli Cells Via Anaerobic Fermentation. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 908-912..

Nik Nor Aziati, Nik Abd Aziz and A. M. M., Sakinah and Noraziah, Abu Yazid (2012) Review: Glycerol Residue And Pitch Recovered From Oleo Chemical And Biodiesel Waste Industries. In: 2nd International Conference on Chemical, Biological and Environment Sciences (ICCEBS'2012), 30 June-1 July 2012 , Bali Indonesia. . (Unpublished)

Nik Nur Zanaryah, Nik Hassan (2012) The effect of different coupling agent on zeolite modification for development of polyetehersulfone mmms for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nik Nurul Ilani , N Redzauddin (2012) A study on effect of 4% total solid for biogas production from wastewater in anaerobic digestion at Indah Water Konsortium (IWK) treatment plant. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nik Rohani, Nik Mustapa (2012) Synthesis and characterization of ZSM-5 zeolite as catalyst in Claisen-Schmidt condensation reaction. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nik Rozaimah, Salim (2010) Simulation study of reactive distillation using Aspen plus for the production of MTBE. Faculty of Chemical and Natural Resource Engineering, Universiti Malaysia Pahang.

Nik Syahira, Nik Alias (2014) Effect of the time taken on the performance of fabricated gas–solid fluidized bed column for the separation of rare earth elements. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nina Farhana, Mohd Jamaludin (2010) Study on bioethanol production from oil palm trunk (OPT) SAP by using saccharomyces cerevisiae kyokai no.7 (ATCC 26422). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nina Farhana, Mohd Jamaludin (2016) Biogas production from poultry manure wastewater using soil mixed culture. Masters thesis, Universiti Malaysia Pahang.

Nitthiyah, Jeyaratnam (2013) Optimization and Characterization of Melamine Urea Formaldehyde (MUF) Based Adhesive With Waste Rubber Powder (WRP) as Filler. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nitthiyah, Jeyaratnam and N. H., Abdurahman and Akindoyo, John Olabode (2016) Comparative Study between Hydrodistillation and Microwave-assisted Hydrodistillation for Extraction of Cinnamomum Cassia Oil. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2647-2652. ISSN 1819-6608

Nitthiyah, Jeyaratnam and N. H., Abdurahman and Akindoyo, John Olabode (2016) The Potential of Microwave Assisted Hydrodistillation in Extraction of Essential Oil from Cinnamomum Cassia (cinnamon). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2179-2183. ISSN 1819-6608

Nitthiyah, Jeyaratnam and N. H., Abdurahman and K., Ramesh and Azhari, H. Nour and A. R., Yuvaraj and Akindoyo, John Olabode (2016) Essential Oil from Cinnamomum Cassia Bark Through Hydrodistillation and Advanced Microwave Assisted Hydrodistillation. Industrial Crops and Products, 92 . pp. 57-66. ISSN 0926-6690

Noor Adila, Zulkepa (2010) Energy conservation for production of 100,000 mt/a isobutylene plant and effect to the plant economic. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Adilah, Md Salehan and Mohd Najib, Razali and Nurul Asmawati, Roslan (2014) Dynamic Flow Treatment of Monoethanolamine (MEA) Wastewater Using Activated Carbon, Chitosan and Rice Husk. In: International Conference on Chemistry and Environmental Sciences Research (ICCESR 2014), 17-18 September 2014 , Penang. . (Unpublished)

Noor Adilah, Md Salehan and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Temperature and Sonication on The Extraction of Gallic Acid from Labisia Pumila (Kacip Fatimah). In: FLUIDSCHE 2015, 25-27 November 2015 , Langkawi, Kedah. . (Unpublished)

Noor Afiqah, Sharifmuddin (2015) Integrated glycerol processor and proton exchange membrane fuel cell (PEMFC) systems for stationary applications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Aishah, Yumasir (2009) Runge Kutta 4th order method and matlab in modeling of biomass growth and product formation in batch fermentation using differential equations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Amiza, Amiril (2006) Optimization of essential oil extraction from zingiber officinale. Facutly Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Ashikin, Ohyanuddin (2012) Investigating the effect of gas flow on the drag reduction performance in multiphase flow system. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Noor Ashila, Ramle (2012) Possibility of using waste tire composites reinforced with oil palm frond as construction materials. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Ashila, Ramle and Syarifah, Abd Rahim and Omar, El-Hadad and Nornizar, Anuar (2014) Solubility of Carbamazepine-Succinic Co-Crystal in Ethanolic Solvent System. In: International Conference On Global Sustainability And Chemical Engineering (ICGSCE 2014), 20-22 August 2014 , Kuala Lumpur. pp. 1-6..

Noor Asikin, Ahmad Safri (2012) Study on extraction kinetics and formulation of natural mosquito repellent solution from marigold flower extracts. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Asikin, Ibrahim (2015) Extraction of thorns of ceiba petandra for phytochemicals studies. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Asma Fazli, Abdul Samad and Arshad, Ahmad (2006) Comparison Product Optimization Performance of Fed-batch Fermentation Processes for Penicillin G Production. In: Proceedings of the 1 st International Conference on Natural Resources Engineering & Technology 2006, 24-25 July 2014 , Putrajaya. pp. 562-575..

Noor Asma Fazli, Abdul Samad and Arshad, Ahmad and Mohd Kamaruddin, Abd Hamid (2007) Product Optimization of a Fed-batch Fermentation Process. In: Proceedings of European Congress of Chemical Engineering (ECCE-6) , 16-20 September 2007 , Copenhagen. pp. 1-17..

Noor Asma Fazli, Abdul Samad and Mohd Faris, Mustafa and Norazana, Ibrahim and Kamarul, Asri Ibrahim and Mohd Kamaruddin, Abd Hamid (2014) Design of Energy Efficient Distillation Columns for Separation of Oxygenates Process. In: Proceedings of the 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) In Conjuction with 21st Regional Synposium on Chemical Engineering (RSCE 2014), 29-30 October 2014 , Taylor's University Lakeside Campus, Subang Jaya. pp. 1-8., 1.

Noor Asma Fazli, Abdul Samad and Mohd Faris, Mustafa and Kamarul, Asri Ibrahim and Norzana, Ibrahim and Mohd Kamaruddin, Abd Hamid (2014) Design of Energy Efficient Distillation Columns Systems. In: Proceedings of International Symposium on Green Manufacturing and Applications, 24-28 June 2014 , Busan, Korea. pp. 66-69..

Noor Asyida , Mohamed (2014) Effect of reducing agents types - on the synthesis of silver nanoparticles. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Asyikin, Ahmad Shuhaimi (2010) Hybrid membrane to remove impurities in waste water. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Atikah, Mohd Badruddin (2012) Separation of oil and water using sugarcane bagasse. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Atikah, Mohd Badruddin (2013) Zeolites catalyst from oil palm ash for petrochemical industries. Masters thesis, Universiti Malaysia Pahang.

Noor Azlinna, Abu Bakar (2013) A Comparative Study on the Carbon Products from Hydrothermal Carbonization and Torrefaction Process Using Wood Fiber Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Noor Azuani, Suliman (2013) Influence of orifice nozzle geometry on flow and spray characteristics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Azwani, Azhar (2014) Production of lactic acid from banana stem waste using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Fadilah, Mohd Sabri and Syed, M. Saufi (2013) Screening of Cation Resins for the Preparation of Cation Exchanger Mixed Matrix Membranes for Copper Ion Removal. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. .

Noor Faridatul Akhamar, Simbun (2010) Fabrication of bacterial cellulose, chitosan and essential oil biocomposite for antimicrobial effect. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Fauzani, Ayop (2013) Enzyme hydrolysis of old newspaper to produce simple sugar for fermentation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Fiza Asiqin, Mohd Ramlan (2013) Biogas Production from Benincasa Hispida Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hana , Md Yusof (2013) Pyrolysis of agricultural waste: effect of temperature and heating rate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hariah , Wahab (2013) Temperature effect on polymerization kinetics of poly methyl methacrylate (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hazira, Abu Bakar (2006) Study on mechanical pretreatment process of palm oil mill effluent (POME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Ida Amalina, Ahamad Nordin and Hidayah, Ariffin and Yoshito, Andou and Mohd Ali, Hassan and Yoshihito, Shirai and Haruo, Nashida and Wan Md Zin, Wan Yunus and Subbian, Karuppuchamy and Nor Azowa, Ibrahim (2013) Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment. Molecules, 18 . pp. 9132-9146. ISSN 1420-3049 (print); 1420-3049 (online)

Noor Intan Shafinas, Muhammad (2011) Computational fluid dynamics of industrial scale spray dryer. Masters thesis, Universiti Malaysia Pahang.

Noor Intan Shafinas, Muhammad and Jolius, Gimbun (2013) Detached Eddy Simulation (DES) of Co-Current Spray Dryer. International Journal of Technology Management , 2 . pp. 17-22. ISSN 2289-2753

Noor Izyannisa, Sarjuni (2010) The fabrication of antibacterial composite from bacterial cellulose and betel leaves. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Sabrina, Ahmad Mutamim and Zainura, Zainon Noor and Mohd Ariff, Abu Hassan and Yuniarto, Adhi and Olsson, Gustaf (2013) Membrane Bioreactor: Applications and Limitations in Treating High Strength Industrial Wastewater. Chemical Engineering Journal, 225 . pp. 109-119. ISSN 1385-8947

Noor Sabrina, Ahmad Mutamim and Chin, Hong Neoh and Zainura, Zainon Noor and Chi, Kim Lim (2016) Green technology in Wastewater Treatment Technologies: Integration of Membrane Bioreactor with Various Wastewater Treatment Systems. Chemical Engineering Journal, 283 . pp. 582-594. ISSN 1385-8947

Noor Safiah, Sohame @ Suhaimi (2012) Fluoride and organic matter removal from groundwater using nanofiltration membrane. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Shahira, Saripa (2013) Study on the effect of ultrasound on oxygen uptake rate (gas-liquid mass transfer) of saccharomyces cerevisae fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Shahirah, Shamsul (2010) The effect of hydrogen enrichment on explosive limits in liquefied petroleum gas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Suzana, Bakar (2012) Characterization and process optimization of Collocalia Fuciphaga extract. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Suzana, Bakar and A. M. M., Sakinah (2015) Resistance in Series Model for Ultrafiltration Xylose Reductase from Product Mixtures. Journal of Applied Science and Agriculture, 10 (5 Sp.). pp. 222-227. ISSN 1816-9112

Noor Syahirah, Othman (2015) Synthesis and characterization of hypercrosslinked polymer : effect of reaction time. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Zariyati, Mohammad (2008) Concentration of biopetrol from palmitic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Zulia, Bahaudin (2012) Sustainability considerations in modeling and improvement of acid gas removal unit in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noordiana , Ariffin (2015) Production of ethanol by immobilized saccharomyces cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noorhidayah, Khamis (2010) Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Noorliana, Mohd Dahari (2010) Production of biodiesel from jatropha curcas L using sodium hydroxide and amano lipase M catalyst in an airlift reactor. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noorlin, Mohd Ali and Siti Zanariah, Satari and Noorhuzaimi@Karimah, Mohd Noor and Lee, Hooi Yeoh (2007) Evaluating The Development of Diabetes Risk Using Probability Technique. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007), 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Noorlin, Mohd Ali and Tsuboi, Ryo and Matsumoto, Yuta and Koishi, Daisuke and Inoue, Kentaro and Maeda, Kazuhiro and Kurata, Hiroyuki (2016) Web Application for Genetic Modification Flux with Database to Estimate Metabolic Fluxes of Genetic Mutants. Journal of Bioscience and Bioengineering, 122 (1). pp. 111-116. ISSN 1389-1723

Noorlisa, Harun and Douglas, P. L. and Croiset, E. and Sandoval, L. A. (2013) Dynamic Simulation and Control of MEA Absorption Process for CO2 Capture from Power Plants. In: Proceedings of the 6th Conference on Process Systems Engineering (PSE ASIA 2013), 25-27 June 2013 , Putra World Trade Centre (PWTC), Kuala Lumpur. pp. 1-6.. (Unpublished)

Noormazlinah, Ahmad (2010) Production of fructo-oligosaccharides from the enzymatic conversion of coconut sugar catalyzed by fructosyltransferase in a batch reactor. Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Noorsakinah, Shafie (2008) Simulation development, design and test of handset casing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Adila, Said (2012) Feasibility Study for Biodiesel Production From Crude Palm Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Aini, Ahmad (2010) Stability of stevioside in Stevia extraction. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Aini, Md Rudin (2012) Design and operation of reactive distillation for biodiesel production case study. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Ashikin , Abdul Hamid (2013) Natural dye products business plan. Masters thesis, Universiti Malaysia Pahang.

Nor Ashikin , Abdul Hamid (2010) Optimization of encapsulation of natural dye by cyclodextrin using response surface methodology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Atikah, Mat Yusoff (2011) Comparison of supercritical fluid extraction and hydrodistillation method for determination of agarwood essential oil. Faculty of Industrial Sciences And Tecnology, Universiti Malaysia Pahang.

Nor Atikah, Mohd (2015) Characterization of polyvinylidene fluoride (PVDF) hollow fiber membrane on different lithium chloride (LICL) loading for carbon dioxide (CO2) removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Azlina, Mohd Ali (2010) Production of high temperature grease using spent bleaching earth (SBE). Faculty of Chemical and Natural Resources Engineering , University Malaysia Pahang.

Nor Aznirah, Abdullah (2010) Removal of ferrum (II) from industrial wastewater using water hyacinth (Eichhornia Crassipes). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Emma Erwina, Wahab and C. K. M., Faizal (2013) Enhancement of Gas Separation performance of Carbon Nanotubes Mixed Matrix Membranes with Acid and Alkali Treatment. In: Conference on Membrane Science and Technology, 27-28 August 2013 , Hotel MS Garden,Kuantan. pp. 1-7.. (Unpublished)

Nor Farhana, Hamid and Farhan, Mohd Said (2015) Screening of Significant Factors for Red Pigment Production by Monascus Purpureus FTC 5356 under Solid State Fermentation using Factorial Design. In: 5th International Conference on Advancement in Science and Technology (ICAST 2015), 10-12 Aug 2015 , Cherating, Kuantan. . (Unpublished)

Nor Hafiza, Hamidon (2009) Fabrication and characterization of biodegradable films from sawdust. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hazlila, Basiran (2006) Extraction of alpha-tocopherol from corn. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hazwani, Rosley (2010) Energy conservation for production of 50000 MT/A Isobutylene by using pinch analysis and effect to the plant economic. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Hazwani Syuhada, Azmi (2013) Adsorption Study of Fructosyltransferase Immobilization By Using Various Adsorbent. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hidawati, Hj Elias (2012) Production of succinic acid from glycerol and glycerol waste. Masters thesis, Universiti Malaysia Pahang.

Nor Hidayah, Ahmad Nordin (2012) Adsorption of Cu(II), Zn(II) and Fe(II) using Chengal sawdust. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Ilia Anisa, Aris (2011) Demulsification of water-in- oil (W/O) emulsion by microwave heating technology. Masters thesis, Universiti Malaysia Pahang .

Nor Ilia Anisa, Aris (2008) Study on pretrreatment of gaharu oil extraction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Izzatiey, Mohammad Usolli (2011) The effect of adsorbent additive on clay based adsorbent to the removal of multidye system. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Khonisah, Daud and B. H., Hameed and Nurul Sa'aadah, Sulaiman (2011) Fenton-like oxidation of reactive black 5 solution using Fe-rice husk ash catalyst. In: - . . (Unpublished)

Nor Nadiah, Mohamad (2015) Isolation of lignin from oil palm empty fruit bunch (OPEFB) by using organosolv method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Rashidah, Ahmed (2012) Removal of acrylic acid from process water by using activated carbon based coconut shell. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Salwani, Ismail (2013) Study on wax deposition of heavy crude oil in pipeline transportation by using oil in water emulsion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shafiza, Ghazali (2012) Synthesis of ZnS-Kaolin as an application of photoreduction of CO2. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Shahida, Hamdan (2014) Carbon dioxide sequestration by algae in pome medium. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shahirah, Mohd Nasir (2010) Removal of heavy metals from industrial wastewater using activated carbon. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Shahirah, Mohd Nasir and Ayodele, Bamidele V. and Jolius, Gimbun and C. K., Cheng (2016) Samarium Promoted Ni/Al2O3 Catalysts for Syngas Production from Glycerol Pyrolysis. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 238-244. ISSN 1978-2993

Nor Shahirah, Mohd Nasir and Ayodele, Bamidele V. and Jolius, Gimbun and Lam, Su Shiung and C. K., Cheng (2016) Renewable Syngas Production from Thermal Cracking of Glycerol over Praseodymium-Promoted Ni/Al2O3 Catalyst. Applied Thermal Engineering, 112 . pp. 871-880. ISSN 1359-4311

Nor Shahirah, Mohd Nasir and Jolius, Gimbun and Asmida, Ideris and Maksudur, R. Khan and C. K., Cheng (2017) Catalytic Pyrolysis of Glycerol into Syngas over Ceria-Promoted Ni/a-Al2O3 Catalyst. Renewable Energy, 107 . pp. 223-234. ISSN 0960-1481

Nor Shahirah, Mohd Nasir and Sureena, Abdullah and Jolius, Gimbun and Ng, Yun Hau and C. K., Cheng (2016) A Study on the Kinetics of Syngas Production from Glycerol over Alumina-Supported Samarium-Nickel Catalyst. International Journal of Hydrogen Energy, 41 (25). pp. 10568-10577. ISSN 0360-3199

Nor Shahroon , Hameed Sultan (2015) Esterification of highly acidified oil using waste cooking oil and ionic liquid supported by divinyl benzene as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shuhada, Shoberi (2010) The role of pH, temperature and catalyst type in caramel manufacturing process. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Syafarah, Zakariya (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using rice straw as substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Syafarah, Zakariya (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using rice straw as substrate. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Zawani, Zainuddin (2013) Studying the delignification of wood fibers using laccase enzymes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor' Aqilah, Norahzan (2012) Investigating the effect of gas flow rate on the drag reduction performance in gas oil-solid gas flow system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nora'asheera, Mohd Nazif (2011) Composites from polypropylene (PP) reinforced with oil palm empty fruit bunch (OPENFB) fibre. Faculty of Chemical and Natural Resources Engineering , University Malaysia Pahang.

Noradlinnaini, Muhamad (2013) Study on the Adsorption Process of Monoethanolamine (MEA) Wastewater Using Activated Carbon and Treated Rice Husk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norafliza, Zainol (2008) Extraction of patchouli oil using hydro distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noraini, Ghazali (2015) Transformation of carbamazepine dihydrate to anhydrous carbamazepine. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norashazrin, Yusof (2010) Study of Cymbopogon citratus (lemongrass) essential oil extraction technique. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norashikin, Mohd Hatta (2010) Development of heterogeneous base catalyst for transesterification reaction. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norashikin, Mat Zain (2014) Development of antimicrobial fabrics based on silver and copper nanoparticles. PhD thesis, Loughborough University.

Norashikin, Mat Zain (2009) The potential of natural waste for production of environmental friendly biodegradable films. Quest, 5 (2). p. 14. ISSN 1985-8159

Norasiha, Hamid and A. M. M., Sakinah and Mazrul Nizam, Abu Seman (2016) Langmuir and Freundlich Isotherm Model for Adsorption of Betacyanin Pigment onto Spun Silk and Acrylic Yarns. In: 1st International Congress on Technology - Engineering & Science, 13-14 February 2016 , Kuala Lumpur, Malaysia. pp. 1-8..

Norasiha, Hamid and A. M. M., Sakinah and Mazrul Nizam, Abu Seman (2016) Regression Analysis for the Adsorption Isotherms of Betacyanin Extracts from the Dragon Fruit Peel onto the Spun Silk Yarn. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 44-53. ISSN 2289-697X

Norasiha, Hamid and A. M. M., Sakinah and Mazrul Nizam, Abu Seman (2016) Screening of Factors Influencing Dyeing Uptake Exhaustion of Betacyanin Extracted onto Spun Silk using Fractional Factorial Design. In: 1st International Congress on Technology - Engineering & Science, 13-14 February 2016 , Kuala Lumpur, Malaysia. pp. 1-8..

Norasmah, Othman (2009) Production of grease from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norasyikin, Che Pi (2009) Ultrasonic extraction of fish oil from eel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noraya, Mohd Kadir (2010) The effect of nitrogen dilution on flammability limits of LPG. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norayuni, Azizi (2012) Biodegradable behaviour of polylactic acid nanocomposite based on modified nanoclay. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norayuni, Azizi (2016) Study on thermal, water barrier and mechanical properties of polyurethane clay nanocomposite prepared by solution intercalation method. Masters thesis, Universiti Malaysia Pahang.

Noraziah, Abu Yazid and Nurul Izyani, A.M. (2012) Influence of Carbon Source and Culture Condition on Arachidonic Acid Production by Candida Krusei in Submerged Culture. In: ISAET Proceedings: 2nd International Conference on Chemical, Biological and Environment Sciences 2012, 30 June - 1 July 2012 , Bali, Indonesia. pp. 1-4..

Noraziah, Abu Yazid and Theng, C. C (2013) Production of Food Grade Thickener from Benincasa Hispida. In: 4th International Conference on Biotechnology and Food Science/Journal of Bioscience,Biochemistry and Bioinformative, 21 - 22 April 2013 , Jinma Hotel, Beijing China. pp. 1-5.. (Unpublished)

Norazimah, Harun and Jolius, Gimbun and Mohammad Tazli, Azizan and Sumaiya, Zainal Abidin (2016) Characterization of Ag-promoted Ni/SiO2 Catalysts for Syngas Production via Carbon Dioxide (CO2) Dry Reforming of Glycerol. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 220-229. ISSN 1978-2993

Norazlina, Hasyim and Kamal, Yusof (2015) Supercritical Carbon Dioxide-Assisted Process In Synthesis of Polymer/Clay Melt. Macromolecular Research, 23 (5). pp. 403-417. ISSN 1598-5032

Norazlinda, Hanen (2013) Colour removal of raw carrageenan by using sodium hypochlorite as bleaching agent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norazma, Mukhtar (2010) The effect of vacuum pressure on the flammability limits of liquefied petroleum gas (LPG). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norazura, Abd Jalil (2009) Adsorption characteristics of lead from aqueous solution by pyrolysed used bleaching clay. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norazwina, Zainol and Anis Sakinah, Lokman Hakim (2014) Optimization of Biological pH Treatment for Acidic Palm Oil Mill Effluent. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014 , Turkey. . (Unpublished)

Norazwina, Zainol and Siti Mazlifah, Ismail (2015) The Study on Biological PH Treatment of Acidic Palm Oil Mill Effluent. Jurnal Teknologi (Sciences and Engineering), 76 (1). pp. 139-146. ISSN 0127-9696 (print); 2180-3722 (online)

Norfatin Sahira, Saidi (2013) Physical Characterization on Hydrothermal Carbonization and Torrefaction Product from Wood Fibre Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhafzan, Junadi (2010) Removal of lead from waste oil using ultrasound assisted with rice bran. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norhalmy, Mohd Nor (2006) Production of cellulose enzyme from aspergillus niger using sugarcane bagasse; the effect of substrate concentration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhamizah, Johari (2012) Batch extraction of 1,3,7-trymethylxanthine from KKM22 cocoa seeds. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norhaniza, Mat Saad (2012) Production and Characterization of Insulator Material From Oil Palm Empty Fruit Bunch (EFB). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhartini, Kassim (2012) Extractive Reaction of Biodiesel Synthesis Using Ethanol as a Solvent : a Conversion Study. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhassimah, Hassim (2009) Influence of polyaniline deposited on Mg towards sensitivity to LPG and CO2. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhaszjana, Awang Hasan (2012) Preparation and characterization of alumina loaded titania in the photoreduction of CO2. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norhayati, Abd Raub (2008) Purification clove oil via typical batch distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhayati, Abdullah and Cormack, Peter A. G. (2016) Non-Aqueous Dispersion (NAD) Polymerisation-Based Synthetic Route to Hypercrosslinked Polymer with High Specific Surface Areas. Advanced Materials Research, 1134 . pp. 198-202. ISSN 1022-6680 (print), 1662-8985 (online)

Norhayati, Abu Bakar (2006) The treatment of oil palm empty fruit bunch fiber for subsequent use as substrate for cellulase production by aspergillus terreus suk-1. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Norhazimah, Abdul Halim (2012) Identification and optimization of process parameters for the production of bioethanol from the fermentation of oil palm trunks SAP. Masters thesis, Universiti Malaysia Pahang.

Norhazwani, Mat Sudin (2012) Synthesis and swelling behaviour of oil palm empty fruit bunch based superabsorbent polymer composite. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norhidaya, Summah (2012) Production of PDMS/PVDF thin film composite membrane for CO2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norhidayah, Saat (2009) Extraction of antioxidant, phenolic content and minerals of coleus blumei leaves by boiling. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhidayu, Aliman (2010) Production of glucose from banana stem waste by using Strain B. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norida, Ridzuan and Muhammad Hidayat, Musa (2012) Comparison Between Treated and Untreated Zeolite Towards the Performance of Polyethersulfone Mixed Matrix Membranes (MMMs) for O2/N2 Gas Separation. Advanced Materials Research, 550-55 . pp. 728-735. ISSN 1022-6680

Norida, Ridzuan and Zulkefli, Yaacob and Fatmawati, Adam (2014) Evaluation on the Effect of Inhibitor Ratio to the Wax Deposition of Local Malaysian Crude. In: International Conference On Global Sustainability And Chemical Engineering (ICGSCE 2014), 20-22 August 2014 , Kuala Lumpur. pp. 1-6..

Norida, Ridzuan (2016) Experimental investigation and modelling of wax deposition inhibition in pipeline transportation of crude oil. PhD thesis, Universiti Malaysia Pahang.

Norida, Ridzuan and F., Adam and Z., Yaacob (2016) Evaluation on the Inhibitor Selection on Wax Deposition for Malaysian Crude Oil. Petroleum Science and Technology, 34 (4). pp. 366-371. ISSN 1091-6466 (Print), 1532-2459 (Online)

Norida, Ridzuan and Fatmawati, Adam (2014) Molecular Recognition of Wax Inhibitor Through Pour Point Depressant Type Inhibitor. In: Proceedings of the International Petroleum Technology Conference (IPTC), 10-12 December 2014 , KLCC, Kuala Lumpur. pp. 1-9..

Norida, Ridzuan and Fatmawati, Adam and Zulkefli, Yaacob (2015) Effects of Shear Rate and Inhibitors on Wax Deposition of Malaysian Crude Oil. Oriental Journal of Chemistry, 31 (4). pp. 1999-2004. ISSN 0970-020X (print); 2231-5039 (online)

Norida, Ridzuan and Fatmawati, Adam and Zulkefli, Yaacob (2016) Screening of Factor Influencing Wax Deposition Using Full Factorial Experimental Design. Petroleum Science and Technology, 34 (1). pp. 84-90. ISSN 1091-6466 (Print), 1532-2459 (Online)

Noridah, Abdullah (2010) Removal of methyl red from aqueous solution using dried water hyacinth (Eichhornia crassipes). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Noriedah, Sofian (2008) Treatment of POME via chitosan based flocculation : a study on variable ph and temperature. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norleen, Isa (2012) Computational Fluid Dynamics of Advanced Gas Dispersion: Deep Hollow Blade Turbine. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norlia, Muhamad and Siti Aishah, Muhmed and Jolius, Gimbun and Mashitah, M. Y. (2014) Influence of Solvent on Extraction of Antioxidant, Flavonoids and Phenolic Content from Averrhoa bilimbi. Journal of Food Science and Engineering, 4 (2014). pp. 255-260. ISSN 2159-5828

Norlia, Muhamad and Siti Aishah, Muhmed and Mashitah, M. Y. and Jolius, Gimbun (2014) Influence of Solvent Polarity and Conditions on Extraction of Antioxidant, Flavonoids and Phenolic Content from Averrhoa bilimbi. Journal of Food Science and Engineering, 4 . pp. 255-260. ISSN 2159-5828

Norlia , Che Saad (2010) A novel process for demulsification of coconut oil milk emulsions by microwave radiation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norlirabiatuladawiyah, Che Ani and Saidatul Shima, Jamari and Khan, Tanveer Ahmed (2015) Investigation of the Elemental Analysis of Carbonaceous Kenaf Fiber from HTC Process. In: National Conference on Postgraduate Studies (NCON-PGR 2015), 24-25 January 2015 , Kuantan, Pahang. pp. 1-5..

Norlista, Saliman (2010) The effect of nitrogen dilution on the flammability limits of hydrogen enriched natural gas. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norliyana, Erain and Woon, Phui Law and Noram Irwan, Ramli and Siew, Choo Chin and Jolius, Gimbun (2017) Understanding the Effect of Surface Terrain on Pollution Transport around Gebeng Industrial Area. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Norliza, Ishak (2012) Formulation of melamine urea formaldehyde (MUF) resin by using various types of filler. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norliza, Ishak (2015) Development of multivariate statistical process monitoring using combination MLR-PCA method. Masters thesis, Universiti Malaysia Pahang.

Norliza Zafira, Razali (2013) An analysis on reducing defect rate in moulding process of phone casing. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Normardhati, Mustafa (2012) Study on the Effect of Processing Parameters on the Extraction of Stevioside Using Soxhlet Extractor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nornabilah, Mohd Hamdan (2010) Color stability of natural colorant on blue pea flowers. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norsalita, Abd Talib (2010) Optimization of pullulanase activity through design of experiment (DOE). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norseri, Mohd Mustaffa (2010) Oil pipeline wax deposition inhibition using chemical methods. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norshafika, Yahya (2010) Effect of cobalt carboxylate on thermal degradation of polyethylene (HDPE). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norshahida, Rahman (2011) Feasibility study of LNG pre � cooling system using carbon Dioxide as a refrigerant. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norshahira, Mohd Nor (2010) Permeability and selectivity study of polyethersulfone membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norsuzieana, Ab Latif (2009) Analysis volatile compound of gaharu oil composition via solid phase micro extraction (SPME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norsyahida , Mohammad (2010) Producing hydrogen from seawater electrolysis. Masters thesis, RMIT University.

Norul Afwan, Kamarudin (2016) Molecular dynamic simulation of patchoulol biotransformation. Masters thesis, Universiti Malaysia Pahang.

Norul Diyana, Mohd Ghazali (2014) Study on sodium nitrate as alternative admixture for opc based binder. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norulshahida, Che Din (2006) Extraction of essential oils from jasmine flower using supercritical co2 co-solvent extraction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norzaini, Abd. Rahim (2013) Physicochemical characterization of Ni-Al2O3 and La-promoted Ni-Al2O3 catalyst for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norzaini, Abd. Rahim (2013) Physicochemical characterization of Ni-Al2O3 and La-promoted Ni-Al2O3 catalyst for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nugroho, Dewayanto and M. Z., Sahad and Mohd Ridzuan, Nordin (2009) Waste to Valuable By-product: Palm Oil Mill Decanter Cake and its Ability to Remove Cd, Cu and Pb Ions. In: International Conference on the Recent Advances in Materials, Mineral and Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP '09), 1-3 June 2009 , Penang, Malaysia. pp. 1-8.. (Unpublished)

Nugroho, Dewayanto and Ruzinah, Isha and Mohd Ridzuan, Nordin (2013) Catalytic Pyrolysis of Palm Oil Decanter Cake using CaO and γ-Al2O3 in Vacuum Fixed Bed Reactor to Produce Bio-oil. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28-29 August 2013 , Kuantan, Pahang. pp. 1-8..

Nugroho , Dewayanto (2010) Waste to valuable by product - utilization of carbonised decanter cake from palm oil milling plant as an effective adsorbent for heavy metal ions in aqueous solution. Masters thesis, Universiti Malaysia Pahang.

Nugroho , Dewayanto and Ruzinah, Isha and Mohd Ridzuan, Nordin (2014) Kinetic Study on the Catalytic Pyrolysis of Decanter Cake from Palm Oil Milling Plant by using Thermogravimetry Data. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 65-69. ISSN 0127-9696 (print); 2180-3722 (online)

Nugroho , Dewayanto (2015) Utilisation of decanter cake from palm oil milling plant as new substrate for the production of bio-oil through catalytic vacuum pyrolysis. PhD thesis, Universiti Malaysia Pahang.

Nur Adiba, Mohd Noor (2012) Troubleshooting on Scale-Up Process of Microalgae Growth from Flask to Photobioreactor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Adillah, Abdul Razak (2010) Effect of CO2 on production of jatropha oil methyl ester via sub/supercritical methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aida, Zakiriah (2013) Solid phase transformation of Carbamazepine-Saccharin (CBZ-SAC) co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aimi Syairah, Mohd Abdul Alim and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound on the Extraction of Ficus Deltoidea Leaves. In: FLUIDSCHE 2015, 25-27 November 2015 , Langkawi, Kedah. p. 1.. (Unpublished)

Nur Aimi Syairah , Mohd Abdul Alim and Ahmad Ziad, Sulaiman and Azilah, Ajit (2016) Application of Ultrasound on the Extraction of Vitexin from Ficus Deltoidea Leaves. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2199-2204. ISSN 1819-6608

Nur Ain, Sukri (2012) Effect of different types of solvent on extraction of phenolic compounds from cosmos caudatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Aini Liyana, Zakaria (2009) Concentration of biopetrol synthesized from stearic acid through catalytic cracking using zeolites as catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Aishah Amalin, Ramjis (2012) Preparation of cation-exchange membrane chromatography through modification of polyamide membrane by grafting of acrylic acid monomer. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Akmalina, Azeman (2013) Production of abe (acetone-butanol-ethanol) from pome by clostridium beijerinckii. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Alia Adnin, Zainol Abidin (2015) Molecular simulation studies of AMP/MDEA absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aminatulmimi, Ismail and Jamil, Roslan and Hafizah, Ramli and Sharifah Fathiyah, Sy Mohamad (2014) Study of Essential Oil from Malaysian Curry Leaves. In: International Conference on Biological, Chemical and Environmental Sciences (BCES-2014), 21-22 January 2014 , Patong Beach, Phuket Thailand. pp. 1-4.. (Unpublished)

Nur Amira, Abdullah (2010) Effect of different type of polymer concentration on asymmetri polysulfone membrane for CO2/CH4 separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nur Amira, Maarof (2014) Production of poly (3-hydroxybutyrate) from pineapple waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Amirah , Mohammad Ammar (2014) Study of chemical oxygen demand and oil-grease reduction for spent caustic from kerosene treating unit in petroleum industry wastewater treatment plant. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Amirul Mukmin, Endut (2009) Stanum dioxide (SnO2) doped polyaniline (n-C6H5NH2) thin film as the materials for liquefied petroleum gas (LPG) and hydrogen (H2) gas sensor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Anis, Saarani (2012) Screening and optimising metal salt concentration for marine microalgae harvesting by flocculation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Ariffah, Md Sani (2010) Nitrogen (N2) removal in gas separation using polysulfone membrane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Athirah, Hassan (2010) Color stability of natural colorant in turmeric. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Athirah, Mohamad Khalil (2015) Equilibria of the triglycerides + faee + ethanol system and extraction of two immiscible liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Athirah, Sabarudin (2014) Purification of sorbitol using reverse osmosis membrane : effect of cross flow velocity and transmembrane pressure. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Athirah, Sabarudin and A. M. M., Sakinah and A. W., Zularisam (2016) Effect of pH on Natural Pigment Betacyanin Extraction from Bougainvillea Bracts. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 599-563..

Nur Atiah, Azmi (2010) Extraction of antioxidant activity, phenolic content and minerals in banana peel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atikah, Che Embee (2013) Development of Polysulfone-Polydimethylsiloxane (Psf Pdms) Thin Film Composite (Tfc) Membrane for Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nur Atikah , Ali (2010) Preparation and characterisation of physicochemical properties of aluminium oxide (Al2O3)water nanofluids using two step methods. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Atiqah , Mohamad (2015) Synthesis and characterization of gel-type polymers via aqueous dispersion polymerization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atiqah , Ramlan (2015) A study on diesel engine performance using biodiesel from waste cooking oil (WCO). Masters thesis, Universiti Malaysia Pahang.

Nur Atteya, Aidilfitri (2010) Design, construction and commissioning of photobioreactor for production of microalgae for biodiesel. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Azhar, Saari (2009) Optimization of temperature and agitation rate on expression of recombinant xylanase in Kluyveromyces lactics using response surfacemethodology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Bashirah, Azli (2013) Biodegradable films from poly (lactic acid) (PLA)-chitosan-silver nanoparticles : preparation and characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Daniati, Zulkifli (2010) Extraction of Zingiber officinale oil by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Dianaty, Nordin (2010) The extraction of papain from papaya leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fahriza , Mohd Ali (2013) Biohydrogen production from palm oil mill effluent (POME) using immobilized mixed culture (SLUDGE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Faizah , Yousof (2015) Physical properties, characterizations & solubility study between calcium sulphate and glutamic acid, n, n-diacetic acid, tetrasodium salt. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farah Azura, Ab Rahim (2010) Adsorption of methylene blue and ferrous ion from aqueos solution using coconut husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Farah Hanim, Rahmat (2014) Characterisation of coal & biomass mixture for co-gasifications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farahain, Khusnun (2013) Jatropha oil based bio-adhesive for plywood application. Masters thesis, Universiti Malaysia Pahang.

Nur Farahain, Khusnun (2012) Mixed-mode interaction membrane chromatography for protein fractionation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur Farahin, Ishak and Noor Intan Shafinas, Muhammad and Nuraini, Mohd Yusoff and Sook, Fun Pang and Mohd Arman, Abd Kadir and Sazwani, Suhaimi and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Jolius, Gimbun (2014) Phenolic Content, Antioxidant Capacity, and Antimicrobial Activity of Essential Oil from Habbatus sauda Seed. Journal of Pure and Applied Microbiology, 8 (6). pp. 1-2. ISSN 0973-7510

Nur Farahin, Ishak and Sook, Fun Pang and Noor Intan Shafinas, Muhammad and Nuraini, Mohd Yusoff and Mohd Arman, Abd Kadir and Sazwani, Suhaimi and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Jolius, Gimbun (2013) Extraction of Antioxidant, Flavonoids and Phenolic content from N. Sativa. In: International Conference of Chemical Engineering and Industrial Biotechnology, 28-29 August 2013 , Kuantan, Pahang. pp. 1-2..

Nur Farahin, Mohd Razlan (2012) Extraction of caffeine from PBC123. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Farhana, Jasney (2010) The use of design of experiment in modeling the bioethanol production from oil palm trunk sap. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Farhana, Ghazali (2006) Study of vanilla essential oil extraction : comparison through heat and wave principles. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farhana, Mhd Razaki (2014) Experimental work on the different conditions of jasmine flowers on the composition of jasmine absolute. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farhanim , Mustaffa (2013) Pyrolysis of agricultural waste: effect of catalyst application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farzana, Omar (2012) Production of Biodiesel from Castor Oil Using Egg Shell Waste as Solid Catalysts. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatihah, Hanafi (2015) The extraction of asystasia gangetica using ethyl lactate solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatin, Muhammad (2015) Screening of factors affecting the enzymatic hydrolysis of fiber pressed palm frond (FPOPF). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatin Nadiah, Fauzi (2015) Screening on the factor affecting the alkaline pretreatment of fiber pressed oil palm frond. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fitriah, Mohd Jaafar (2012) Effects of carbon dioxide on flammability limits of acetylene. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Hafizah, Hussin (2013) Demulsification of Crude Oil Emulsions via Microwave Assisted Chemicals (Environmental Friendly). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hayati, Zulkefli (2011) Preparation and characterization of cobalt based and zinc promoted catalyst fro fisher tropsch synthesis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazila, Mohamad Azmi (2010) The extraction of amino acids from papaya leaves using supercritical carbon dioxide with water. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Hazirah Huda, Mohd Harun and Noor Asma Fazli, Abdul Samad and Suriyati, Saleh (2016) Development of Kinetics Model for Torrefaction of Logging Residue and Palm Oil Waste. In: 7th International Symposium On Design, Operation and Control Of Chemical Processes (PSE ASIA 2016), 24-27 July 2016 , The University of Tokyo, Japan. pp. 1-6.. (Unpublished)

Nur Hazwani, Rosli (2010) Comparison between primary method analysis in determination of nutrient content in tempeh. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Hidayah, Maslam (2010) Effects of substrate concentration and agitation rate on butanol production from palm oil mill effluent using clostridium acetobutylicum. Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Nur Hidayah, Mat Yasin (2014) Membrane technology in microalgae harvesting for biofuel production. PhD thesis, Universiti Sains Malaysia.

Nur Husna, Baharuddin (2009) Delignification of banana stem waste in anaerobic conditions by using Bacillus cereus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Idayu, Nirda Ismail (2012) Production of bio-oil from sawdust and oil palm fronds biomass uaing gas fired pyrolysis system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Ismayuslini, Saberi (2010) Degradation of phenol by ultrasonic irradiation in addition of salt. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Izdiharr, Zainol (2010) Biosorption of iron (II) and methylene blue using tea waste. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nur Izni, Mohd Khir (2014) Performance of wall panels with grouted sleeve connector under shear and bending. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Izzati , Khairuddin (2012) Performance of diesel engine using hydrogen as a fuel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Izzatie Hannah, Razman and Salasiah, Endud and Izan Izwan, Misnon and Zainab, Ramli (2016) Electrochemical Performance Of Ordered Mesoporous Carbon Modified By Oxidative Treatment With Aqueous Nitric Acid. Jurnal Teknologi (Sciences and Engineering), 78 (3-2). pp. 1-6. ISSN 0127-9696 (print); 2180-3722 (online)

Nur Laili, Muhammad Lokman (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of clove essential oils. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Liyana, Nasrudin (2010) Biopetrol synthesized from rubber seed's fatty acid using fuller's earth as catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Madieha, Md Yusof (2012) Thermal behaviour of polylactic acid (PLA) nanocomposite based on modified nanoclay. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Mahirah, Hibrahim (2014) Determination of energy usage and potential environment impact (pei) of a multi effect distillation system for production of water for injection (wfi) in pharmaceutical industries. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Munirah, Abd Wahab (2009) Antibiotic purification by using zeolites adsorbent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Nabillah, Mohd Arif (2014) Extraction and isolation of kappa carrageenan from red seaweeds. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Najwa, Nazaruddin (2014) Synthesis and characterization of gel-type polymers via non-aqueous dispersion polymerization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Nazirah, Zulkafli (2014) Production of bioplastic from agricultural waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Putih Ikhram Ilani, Alias (2013) Production of xylitol by candida krusei using xylose from oil palm empty fruit bunch (opefb) as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Putih Ikhram Ilani, Alias (2013) Production of xylitol by candida krusei using xylose from oil palm empty fruit bunch (opefb) as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Sakinah, Abd Aziz (2012) Synthesis and swelling behaviour of bentonite based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Sara Syuhada, Baharudin (2014) Irradiated films via nuclear technology for food packaging purposes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Shafira, Kamar (2014) Potential study of treated effluent organic matter (EFOM) as fertilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Shafiza Afzan , Sharif (2015) Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling. PhD thesis, Universiti Malaysia Pahang.

Nur Sharlinawati, Md. Said (2008) Separation of lysozyme using ultrafiltration membrane, effect of ph and ionic strength on flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Shazwani, Nadzri (2012) The optimization of red pigment by monascus purpureus FTC 5356 in solid state fermentation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur Suhada, Sulaiman (2009) Biosorption of copper (II) from aqueous solution by using dried water hyacinth (Eicchornia Crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Suhada, Amran (2014) The effect of catalyst composition for palm oil waste gasification: thermal gravimetric analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syamiera Nabila , Masri (2012) The effect of drying temperature towards quantity and quality of palm oil extracted from dried decanter cake. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Syazana, Hamzah (2010) Newton loop-node analysis study on gas pipeline network. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Syazana, Md Nazri (2014) Production of bio resin from palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syazana, Muhd Nasrah and Mior Ahmad Khushairi, Mohd Zahari and Nasratun, Masngut (2016) Biobutanol Production by Clostridium acetobutylicum ATCC 824 Using Oil Palm Frond (OPF) Juice. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 34-38..

Nur Syazwani, Ghazali (2011) Extraction of Pandanus Amaryllifolius essential oil from pandan leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syuhada, Mohd Shokri (2009) The effect flammability limit in conventional combustion of hydrogen enrichment in natural gas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syuhada, Omar (2011) Removal of heavy metal in medical institutional wastewater using ultrasonic assisted various leaching solution. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Syuhada, Ramli (2010) Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Zainaim, Mohamed Nawi (2010) Degradation of Azoic congo red dye by using ultrasonic irradiation with additive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur `Afifah, Mohd Mansor (2012) Solvent and temperature effect in the polymorphism study of 2,6-dihydroxybenzoic acid crystal. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur ‘Adilah, Ismail (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of ginger essential oil. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur'atiqah, Norhalim (2010) Optimization of xylose production from rice straw using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nuradibah, Hussin (2010) Batch extraction of caffeine from cocoa MCBC 1. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nuradibah , Hussin and C. K., Cheng and Anwaruddin, Hisyam (2014) Study of Important Operating Parameters for the Adsorption of Acrylic Acid from Wastewater Using Palm Ash. Journal of Applied Sciences , 14 (13). pp. 1385-1390. ISSN 1812-5654 (print); 1812-5662 (online)

Nurain, Mansor (2008) Fabrication of chitosan and poly (vinyl alcohol) blend membranes with different concentration of chitosan. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuraini, Mohd Yusoff and Jolius, Gimbun and Mashitah, M. Y. (2013) Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, US, pp. 151-157. ISBN 978-1-4614-6207-1, 978-1-4614-6208-8 (online)

Nurasyikin, Jusoh (2012) Synthesis of Polyester Nanofiltration Membrane for Removal of Natural Organic Matter. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nuratiqah, Ismail (2014) Formulation of biogrease from castor waste. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurdiyana, Abu Bakar Sidik (2008) Comparison of gaharu (Aquilaria Malaccensis) essential oil composition between each country. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuredah Aisyah , Nor Azman (2015) Bio-surfactant synthesis from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfani Ekawati, Musthafa (2010) Removal of acid blue 25 dye by using dried water hyacinth from aqueos solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurfarah Aaina, Mohd Zulkifli (2009) Process simulation and improvement of industrial acid gas removal unit (AGRU). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurfarahin, Harun (2013) Microwave Assisted Extraction (MAE) of Castor Oil From Castor Bean. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfariha, Kamaruddin (2013) Development of PVDF/PEG Thin Film Composite Membrane For CO2/N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfariha Fathmi, Zakaria (2013) Application of ultrasound technique for Steviol Glycosides separation from mixtures of S.Rebaudiana stems and leaves using methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhafizah, Abdul Malik (2014) Effect of substrate concentration on production of sorbitol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhafizah , Abdul Razak (2012) Formulation of lubricating grease from castor bean. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurhafizah Izzati, Kasim (2014) Study on the effect of cellulose loading and ph on water absorbency of superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhamizah, Ahmad Zaini (2013) Formulation of Anti-Aging Cream from Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nurhamizah, Ibrahim (2013) Effects of drying methods on the antioxidant activities on Benincasa Hispida seed extracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhana, Shafiee (2010) Effect of different types of coagulation medium on asymmetric polysulfone membrane for CO2/CH4 gas separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurhasiken, Raman (2010) Production of glucose from banana stem waste using Strain A. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nuri ‘Adilah Nashrulmillah, Idris (2014) Biomethanation of palm oil mill effluent (pome) by ultrasonic membrane anaerobic system (umas) using pome as substrate. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurkhalida, Shahari (2013) Investigating the Effect of Nonionic Surfactant Molecular Weight on Its Drag Reduction Performance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurlaila, Ismail and Mohd Hezri, Fazalul Rahiman and Mod Nasir, Taib and Nor Azah, Mohd Ali and Mailina, Jamil and Saiful Nizam, Tajuddin (2013) Analysis of Chemical Compounds of Agarwood Oil based on Headspace-Solid Phase Microextraction combined with Gas Chromatography Mass-Spectrometry. In: IEEE 9th International Colloquium on Signal Processing and its Applications, 8-10 March 2013 , Kuala Lumpur. pp. 215-218..

Nurlaila, Ismail and Mohd Hezri Fazalul, Rahiman and Mohd Nasir, Taib and Nor Azah, Mohd Ali and Mailina, Jamil and Saiful Nizam, Tajuddin (2013) Classification of the Quality of Agarwood Oils from Malaysia using Z-Score Technique. In: IEEE 3rd International Conference on System Engineering and Technology (ICSET 2013), 19-20 August 2013 , Shah Alam, Malaysia. pp. 78-82..

Nurlin, Abu Samah (2012) Determination of Stevioside and Rebaudioside A in Stevia Rebaudiana Leaves via preparative High Performance Liquid Chromatography (prep-HPLC). International Journal of Chemical and Environmental Engineering . ISSN 2078-0737

Nurlin Fatin, Mohd Tahirun (2014) Preparation of nanofiltration hollow fiber membrane for acetic acid removal from synthetic hydrolysate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurliyana, Masiran and Vo, Dai-Viet N. and Md. Abdus, Salam and Bawadi, Abdullah (2016) Improvement on Coke Formation of CaO-Ni/Al2O3 Catalysts in Ethylene Production via Dehydration of Ethanol. Procedia Engineering, 148 . pp. 1289-1294. ISSN 1877-7058

Nurshakirin, Roslee (2014) Production of succinic acid from bread waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nursofia , Mohd Yunus (2015) Carbon dioxide (CO2) dry reforming of glycerol for hydrogen production using Ni/La2O3 and Co/La2O3. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nursofia , Mohd Yunus and Nurul Asmawati, Roslan and S. Y., Chin and Sumaiya, Zainal Abidin (2016) Esterification of Free Fatty Acid in Used Cooking Oil Using Gelular Exchange Resin as Catalysts. Procedia Engineering, 148 . pp. 1274-1281. ISSN 1877-7058

Nursyilla, Mohd Fauzi (2012) Effects of carbon dioxide gas on flammability limits of LPG. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul 'Adilah, Rosnan (2015) Combination of mussel shell and potassium hydroxide as solid waste basic catalyst (SWBC) for fatty acid methyl ester (FAME) synthesis from castor oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul 'Izzati, Ab Rahim (2012) Study on Ageing Process of Polymer Modified Bitumen. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Afida, Makhtar (2010) Effect of ph and glycerol waste amount on the glycerol recovery. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Aida, Jamaluddin (2012) Computational fluid dynamics of flooding, loading and fully dispersed regime in gas-liquid stirred tank. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Hamdan Abd. Khalek (2012) A study on ultrasonic assisted extraction and formulate natural hair shampoo from sapindus emarginatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Jalanni (2010) Study on bioethanol production from oil palm trunk SAP. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Ramli (2009) Process debottlenecking of small scale liquefied natural gas (LNG) plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Ain, Ibrahim (2015) Adsorption of betacyanin on yarns. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Ain, Jalanni (2015) Synthesis,characterization and performance of triethanolamine-based thin film composite nanofiltration membrane. Masters thesis, Universiti Malaysia Pahang.

Nurul Ain, Jumri (2014) Effect of extraction conditions on protein concentration during edible bird’s nest alkaline hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Ain, Mohamed Razali (2014) Synthesis, characterization and catalytic performance of Cu/ZnO/SBA-15 for hydrogen of carbon dioxide to methanol. PhD thesis, Universiti Malaysia Pahang.

Nurul Ain , Jalanni (2010) Study on bioethanol production from oil palm trunk SAP. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain , Jalanni and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2015) New Polyester Nanofiltration (NF) Membrane for Humic Acid Removal. Advanced Materials Research, 1107 . pp. 383-388. ISSN 1022-6680 (print), 1662-8985 (online)

Nurul Aini, Mohd Azman and Segovia, Francisco and Martínez-Farré, Xavier and Gil, Emilio and Almajano, María Pilar (2014) Screening of Antioxidant Activity of Gentian Lutea Root and Its Application in Oil-in-Water Emulsions. Antioxidants, 3 (2). pp. 455-471. ISSN 2076-3921

Nurul Aini, Mohd Azman and Gallego, Maria Gabriela and Julia, Luis and Fajari, Lluis and Almajano, María Pilar (2015) The Effect of Convolvulus arvensis Dried Extract as a Potential Antioxidant in Food Models. Antioxidants, 4 (1). pp. 170-184. ISSN 2076-3921

Nurul Aini, Mohd Azman and Peiro, Sara and Fajari, Lluis and Julia, Luis and Almajano, María Pilar (2014) Radical Scavenging of White Tea and Its Flavonoid Constituents by Electron Paramagnetic Resonance (EPR) Spectroscopy. Journal of Agricultural and Food Chemistry, 62 (25). pp. 5743-5748. ISSN 0021-8561 (print); 1520-5118 (online)

Nurul Aini, Mohd Azman and Skowyra, Monika and Muhammad, Kwenstan and Gallego, Maria Gabriela and Almajano, Maria Pilar (2017) Evaluation of the Antioxidant Activity of Betula pendula Leaves Extract and its Effects on Model Foods. Pharmaceutical Biology, 55 (1). pp. 912-919. ISSN 1744-5116

Nurul Aini, Rosli (2014) Carbamazepine-ibuprofen co-crystal screening using non-stoichiometric method. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Akma, Aliyah (2012) Adsorption of lead using rice husk. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nurul Akma , Reduan (2013) Study on optimum condition in ph solution of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurul Alia, Khalil (2012) Preparation of cation-exchange membrane chromatography by modification of polyamide membrane through grafting of methacrylic acid monomer. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Amalina, Alias (2014) Kinetic study on poly(3-hydroxybutyrate) production from oil palm frond juice in batch fermentation. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Arpah, Abd Malek (2015) Furfural separation from palm empty fruit bunch (pefb) using solid waste catalyst (SWC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Asmawati, Roslan and Mohammad Haniff, Che Hasnan and Norhayati, Abdullah and Syamsul Bahari, Abdullah and Sumaiya, Zainal Abidin (2016) A Preliminary Study: Esterification of Free Fatty Acids (FFA) in Artificially Modified Feedstock Using Ionic Liquids as Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 182-191. ISSN 1978-2993

Nurul Atikah, Mohd Rodzri (2015) Factorial screening of ferulic acid production from fiber pressed oil palm frond using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Atikah, Mohd Rodzri and Zulsyazwan, Ahmad Khushairi and Wan Mohd Hafizuddin, Wan Yussof and N., Zainol and Rozaimi, Abu Samah (2015) Main Factor Contribution in Factorial Screening for Ferulic Acid Production from Fibre-Pressed Oil Palm Frond (FPOPF) Using Mixed Culture. In: Asian Congress on Biotechnology 2015 (ACB2015), 15-19 November 2015 , Kuala Lumpur. , 11. ISSN 1985-9325(Print); 2180-1606 (Online)

Nurul Atiqah, Abdul Hamid (2014) Synthesis of molecularly imprinted polymer for glucose binding. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Basyirah, Samat (2010) Effect of coating on permeability and selectivity of polysulfone membrane for CO2/CH4 separation. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Bazlinda, Bazalan (2012) Study the effect of pressure on flammability limits of acetylene. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Fahana, Abdul Pattah (2013) Extraction of Lantana Camara for Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Farha, Abdul Rashid (2008) Biodiesel production via single - step alkali catalyst in batch process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Farhana, Alias (2012) Novel method of preparation of blue crude copper phthalocyanine having the grennish shade. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nurul Farhana, Mohamed Basri (2012) Cation exchanger mixed matrix membrane (MMM) for lead (II) removal from wastewater. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Farhanah, Che Bahar (2010) Development of asymmetric polyethersulfone (PES) mixed Matrix membrane for O2/N2 separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Farhanah, Rosli (2013) Analysis and prediction of injected parts by using mould filling simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Fatehah, Abdul Ghafar (2012) Pencirian pencilan bakteria anaerob selulolitik dan ligninolitik dalam biodegradasi sisa batang pisang. Faculty of Industrial Sciences And Tecnology, Universiti Malaysia Pahang.

Nurul Fatihah, Mahamad Roli (2014) Kinetic study of esterification of fatty acids over calcium ferrite catalyst. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fatimah, Abdul Basir (2013) Investigating the Effect of Polymer Molecular Weight on Drag Reduction Performance Using Rotating Disk Apparatus (RDA). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fatin Shazwani, Suhaimi (2012) Bio-oil Production from Pyrolysis of Palm Oil Wastes. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Hafiza, Norden (2014) Flow enhancement in pipeline transportation for heavy crude oil emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Haizan, Ahmad (2010) Studies on flow performance of crude palm oil in transportation handling using different type of mechanisms. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Hamizah, Baharan (2006) Analysis of partial least square estimation process and control of distillation column process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Hanim, Mat Noor (2010) Production of poly-hydroxy butyrate (PHB) by Bacilius Cereus using banana stem as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Haslin, Adnan (2013) Business Plan for the Production of Fructo-Oligosaccharide. Masters thesis, Universiti Malaysia Pahang.

Nurul Hidayah, Muhamad (2010) Foulant analysis in cross-flow filtration using resistancein-series model. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Hidayah, Muhamad @ Ghazali (2015) Development of limestone based catalyst for biodiesel production from waste cooking oil. Masters thesis, Universiti Malaysia Pahang.

Nurul Hidayah, Muhamad Ghazali and Jolius, Gimbun and Said, N. (2014) Transesterification of Waste Cooking Oil using Chemically Treated Catalyst. Journal of Applied Sciences , 14 (13). pp. 1425-1429. ISSN 1812-5654

Nurul Ika Amira, Zakaria (2015) Liquid detergent from palm oil and palm kernel oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Ilyana, Ali (2010) Application of local biomass as an adsorbent for removal of phenol from aquoeus solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Izwanie, Rasli (2010) Optimization of xylose production from sugarcane bagasse using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Izwanie, Rasli (2015) Fabrication of chromatographic membrane via surface-grafted membrane for protein separation. Masters thesis, Universiti Malaysia Pahang.

Nurul Izyatulikma, Yusoff (2012) A pre-study on the potential plants to treat heavy metals in contaminated soil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Kalyisah, Abd Khar (2012) The molecular dynamics simulation of 2,6-dihydroxybenzoic acid crytal in ethanol, methanol and p-xylene at 20°c using compass force field. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Mimi Suziana , Abdul Aziz (2013) Investigating the potential of using moringa oleifera husks for bioethanol production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Nadia, Samin (2012) Reduction of Fe(II), Zn(II) and Cd(II) using rice husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Nadia Ummira, Abu Bakar (2011) Isolation of microorganism from oil palm sap. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Nadiah, Manap (2009) Screening of variables relevant to biomass yield and biopolymer yield in shake-flask fermentation for biopolymer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Nadiah, Md Aini (2010) Biodegradable biocomposite starch based films blended with chitosan and gelatin. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Noramelya, Zulkefli (2014) The effect of low sulphur wax residue (lswr) surfactant in stabilization of crude oil emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Shamsinar, Shahirin (2015) Development of multiple interactions mixed matrix membrane chromatography for protein fractionation in chicken egg white. Masters thesis, Universiti Malaysia Pahang.

Nurul Shamsinar, Shahirin (2008) Purification of clove oil via middle vessel batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Shareena Aqmar, Mohd Sharif (2009) Biosorption of methylene blue from aqueous solution using dried water hyacinth (Eichornia crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia pahang.

Nurul'ain , Othman (2013) Effectiveness Magnesium ammonium phospate (MAP) precipitation and filtration method in treatment of palm oil mill effluent (POME). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

NurulHidayah, Zarani (2014) Effect of pressure on the performance of gas-solid fluidized bed for the separation of rare earth elements. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuruldiyanah, Kamarudin (2010) Modelling of wood resin interaction. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurulhaida, Luhid (2008) Comparing the removal performance of CO2 gas using adsorption and absorption techniques. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulhidayah, Rosli (2013) Simulation on the effect of temperature on forward osmosis process across membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulhuda, Kasim (2009) Separation technique of crude palm oil at clarification area via optimum parameters. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulhuda, Md. Noh (2008) Fabrication of chitosan membrane : the effects of different chitosan compositions on membrane performance in treating oily wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuruliana, Ismail (2012) Enhancement production biogas from palm oil mill effluent (POME). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurulilliani , Mohd Shukri (2013) Chemical characteristics of carbon nanoparticle converts from wood fiber waste via subcritical liquid and pyrolysis conditions. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang.

Nuruljannah, Samidi (2012) Development of cement kiln dust (CKD) based catalyst for biodiesel production from waste cooking oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurulsuriani, Awang (2015) Production of lactic acid using facultative anaerobic bacteria : optimization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurzahida, Mohd Zaid (2010) Visualization of intracellular ice crystal formation using x-ray micro-computed tomography /. Masters thesis, Faculty of Chemical and Natural Resource Engineering .

Nur’amirah, Abdul Ghafar (2015) Effect of organic and inorganic additives in membrane composition on the properties and performance of nanofiltration membrane for xylose and glucose separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

O

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Effects of Diethyl Ether Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. International Journal of Advanced Science and Technology (IJAST), 52 . pp. 111-120. ISSN 2005-4238

Olalere, Olusegun Abayomi and Abdurahman, H. Nour and Alara, Oluwaseun Ruth and Mani Malam, Ahmad (2016) The Impact of Pepper Production on Malaysian Economic and the Need for Nutraceutical Diversification. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 453-457..

Omar, El-Hadad and Gregory, T. Russell (2014) Effect of Cyclodextrin on the g-radiolysis Initiated Emulsion Polymerization of Styrene. Polymer, 55 . pp. 4447-4458. ISSN 0032-3861

Omar, El-Hadad and Ruo, Cai and Abdul-Fattah, A. Asfour (2014) Densities and Kinematic Viscosities of a Quinary Regular Liquid System and Its Five Quaternary Subsystems at 293.15 K and 298.15 K. International Journal of Thermophysics . ISSN 0195-928X (Print); 1572-9567 (Online)

Omar Syah Jehan, Elham (2010) Biopetrol synthesized from oleic acid heterogenous Catalytic cracking by using granular metal as catalyst. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Omoregbe, Osaze and Danh, Huong T. and Abidin, S. Z. and Setiabudi, H. D. and Bawadi, Abdullah and Vu, Khanh B. and Vo, Dai-Viet N. (2016) Influence of Lanthanide Promoters on Ni/SBA-15 Catalysts for Syngas Production by Methane Dry Reforming. Procedia Engineering, 148 . pp. 1388-1395. ISSN 1877-7058

Omoregbe, Osaze and Tan, Ji Siang and Danh, Huong T. and Setiabudi, H. D. and Abidin, S. Z. and Vo, Dai-Viet N. (2016) Syngas Production from Methane Dry Reforming over Ni/SBA-15 Catalyst: Effect of Operating Parameters. In: 251st American Chemical Society National Meeting & Exposition, 13-17 March, 2016 , San Diego, California. .

Ong, Hui Fong (2012) Extraction of essential oil from orange peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ong, Chen Loong (2014) Lanthanum promoted cobalt catalyst for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ong, Huei Ruey (2016) Tailoring the preparation of palm oil based alkyd/epoxy resin composite through copper oxide nanoparticle. PhD thesis, Universiti Malaysia Pahang.

Ong, Huei Ruey and Maksudur, R. Khan and Ridzuan, Ramli and M. Y., Rosli (2015) Effect of CuO Nanoparticle on Mechanical and Thermal Properties of Palm Oil Based Alkyd/Epoxy Resin Blend. Procedia Chemistry, 16 . pp. 623-631. ISSN 18766196

Ong, Huei Ruey and Maksudur, R. Khan and Ridzuan, Ramli and Rahman, Md. Wasikur and M. Y., Rosli (2015) Tailoring Base Catalyzed Synthesis of Palm Oil Based Alkyd Resin Through CuO Nanoparticles. RSC Advances, 5 (116). pp. 95894-95902. ISSN 2046-2069

Ong, Huei Ruey and Ramli, Ridzuan and Maksudur, R. Khan and M. Y., Rosli (2016) The Influence of CuO Nanoparticle on Non-edible Rubber Seed Oil based Alkyd Resin Preparation and its Antimicrobial Activity. Progress in Organic Coatings, 101 . pp. 245-252. ISSN 0300-9440

Ong, Huei Ruey and Reddy Prasad, D. M. and Maksudur, R. Khan (2016) Optimization of Preparation Conditions for Melamine Urea Formaldehyde Based Adhesive for Plywood Application using Response Surface Methodology. Indian Journal of Chemical Technology (IJCT), 23 (1). pp. 39-46.

Osazuwa, Osarieme U. and C. K., Cheng (2017) Catalytic Conversion of Methane and Carbon Dioxide (Greenhouse Gases) into Syngas over Samarium-Cobalt-Trioxides Perovskite Catalyst. Journal of Cleaner Production, 148 . pp. 202-211. ISSN 0959-6526 (print), 1879-1786 (online)

Osazuwa, Osarieme U. and C. K., Cheng (2017) Stoichiometric Effects of Feed Ratio on Syngas Production from CO2 Reforming of Methane over SmCoO3 Perovskite Catalyst. Malaysian Journal of Catalysis, 2 (1). pp. 12-17. ISSN 0128-2581

Osazuwa, Osarieme U. and Setiabudi, H. D. and Ruwaida, Abdul Rashid and C. K., Cheng (2017) Syngas Production via Methane Dry Reforming: A Novel Application of SmCoO3 Perovskite Catalyst. Journal of Natural Gas Science and Engineering, 37 . pp. 435-448. ISSN 1875-5100

Osazuwa, Osarieme Uyi and C. K., Cheng (2016) A Review on Perovskite as a Catalyst. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 577-581..

P

Pachiapan, Murugesan (2008) Fabrication of chitosan membrane : the effect of evaporation times on membrane performance in oily waste water treatment. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Pang, Zee Yee (2015) Effect of densified oil palm empty fruit bunch towards the torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Patrick, Albrecht Raphael (2010) . Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Paveswari, Sithambaranathan (2011) Production of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pei Chin, Tan (2014) Temperature regulation for hydrodistillation of essential oil extraction process from garcinia mangostana linn (GML) pericarp. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Perumal, Devendran Pillai (2009) Cassification of breast tumor based on ultrasound images. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Pettrus, Akun (2006) The effect of biosurfactant in solving of petrochemical industry wastewater treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Phui, Law Woon (2013) Optimization of solution polymerization of methyl methacrylate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pillai Ganasekaram, Regupathi Raja (2012) Biopetrol synthesized from rubber seed oil by zeolite catalyst :effect of ethanol in solvent extraction of rubber seeds. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Poddar, Pradeep Kumar and Gupta, Arun and Saidatul Shima, Jamari and Ng, Siew Kim and Khan, Tanveer Ahmed and Sharma, Swati and Mohd Aizudin, Abd Aziz (2015) Synthesis of Nanocellulose from Rubberwood Fibers Via Ultrasonication Combined with Enzymatic and Chemical Pretreatments. Asian Journal of Applied Sciences, 3 (5). pp. 520-527. ISSN 2321–0893

Ponnarasy, Ganasen and Maksudur, R. Khan and M., Abul Kalam and Mohd Sabri, Mahmud (2014) Effect of Visible Light on Catalytic Hydrolysis of P-nitrophenyl Palmitate by the Pseudomonas Cepacia Lipase Immobilized on Sol–Gel Support. Bioprocess and Biosystems Engineering, 37 (11). pp. 2353-2359. ISSN 1615-7591 (print); 1615-7605 (online)

Pooi Yee, Liew (2014) Study on the effect of hydrodistillation on yield and limonene composition of various citrus essential oil and its application as natural aromatic gel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pourjavaheri, Firoozeh and Mohaddes, Farzad and Shanks, Robert A. and Czajka, Michael and Gupta, Arun (2014) Effects of Different Purification Methods on Chicken Feather Keratin. Advanced Materials Research, 941-94 . pp. 1184-1187. ISSN 1022-6680 (print), 1662-8985 (online)

Prakash, Gunah (2011) Optimization of xylose production from sugarcane bagasse using response surface methodology (RSM). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Prakash, Nagasvara Ravo (2014) Enzymatic production of cassava flour using pectinase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pravina, Ashok Kumar (2008) Application of solid phase microextraction in gaharu essential oil analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Priyaah, Kumaran (2014) Formulation of wound healing hydrogel based on keratin derived from chicken feather. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pushpaa, Rajakumaran (2014) Optimization study on amine absorption process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Q

Qusyairi, Ali (2008) Preparation of Pt / Al2O3 for preheating system on autothermal reformer for fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

R

R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended. Journal of Mechanical Engineering and Sciences (JMES) , 2 . 226 -236. ISSN 2231-8380

R., Ramesh and Anwaruddin, Hisyam and K., Ramesh (2014) Measurement and Prediction of Thermo Physical Properties of Binary Liquid Mixtures at Various Temperatures Using McAllister Model. The International Journal Of Engineering And Science (IJES), 3 (3). pp. 68-74. ISSN 2319–1805 (print); 2319–1813 (online)

R., Ramesh and K., Ramesh and K., Yusoh (2014) Application of Redlich-Kister Model to Measure and Predict Thermo Physical Properties of Binary Liquid Mixtures at Various Temperatures. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 29-35. ISSN 2289-697X

R., Ramesh and K., Ramesh and K., Yusoh (2014) Measurement and Prediction of Thermo Physical Properties to Study Intermolecular Interactions of Binary Liquid Mixtures at Various Temperatures by Using McAllister Model. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 18-23. ISSN 2289-697X

R., Ramesh and M. Y. M., Yunus and K., Ramesh (2015) Applications of Nonlinear Models to Measure and Predict Thermo Physical Properties of Binary Liquid Mixture1, 4 Dioxane with Bromo benzene at Various Temperatures. In: International Conference on Chemical Engineering and Technology, 20-21 August 2015 , London, United Kingdom. . (Unpublished)

R., Ramesh and T. K., Thanusha and K., Ramesh and M. Y. M., Yunus (2016) Comparative Analysis of Experimental and Numerical Investigation on Thermophysicalproperties in Hydro Carbon Mixtures using Jouyban-Acree Model at Various Temperatures. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1673-1680. ISSN 1819-6608

R., Ramesh and T. K., Thanusha and M. Y. M., Yunus and K., Ramesh (2015) Experimental and Numerical Investigation on Thermophysical Properties of Hydrocarbon Liquid Mixtures using Krishnan-Laddha and Jouyban-Acree Models at Various Temperatures. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015, 11-13 October 2015 , Johor Bahru, Johor, Malaysia. . (In Press)

R., Ridzuan and M. D. H., Beg and M. Y., Rosli and S., Samahani and M. H., Rohaya and A. A., Astimar and I., Zawawi (2013) Effects of Coupling Agent and Flame Retardant on the Performances of Oil Palm Empty Fruit Bunch Fiber Reinforced Polypropylene Composites. World Academy of Science, Engineering and Technology, 7 (6). pp. 1962-1970. ISSN 2010-3778

Rabiatul Arbiyah, Ruslan (2015) Calibrating a HEC-RAS model of V-Notch weir as inline structure using open channel flume flow method and its application for sediment transport. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Rafidah, Rahim (2012) Performance of biodiesel blends on compression ignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rafiqa Liyana, Rahimi (2013) To study optimum parameters in the soap production derived from palm kernel oil and palm oil by saponification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ragini , Mahendran (2014) Study the effect of using ultrasonic membrane anaerobic system (umas) in treating sugarcane waste and methane gas production. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rahimah, Abd Rahim (2012) Optimization Of Phenolic Content From Tulsi Plant (Ocimum Sanctum) By Ultrasonic-Assisted Extraction: Comparison With Conventional Soxhlet Extraction Method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rahman, Abdul Haziq Abdul and Abdullah, Bawadi and Vo, Dai-Viet N. (2014) Modelling of Carbon Dioxide Leakage in Abandon Wells using Computational Fluid Dynamics. Applied Mechanics and Materials, 625 . pp. 780-783. ISSN 1662-7482

Rahman, Md. Mostafizur and Khan, Md. Maksudur Rahman and Uddin, Md. Tamez and Islam, Akhtarul (2016) Textile Effluent Treatment Plant Sludge: Characterization and Utilization in Building Materials. Arabian Journal for Science and Engineering . pp. 1-8. ISSN 2193-567X (Print); 2191-4281 (Online)

Rahman, Md. Wasikur and Alam, Jahangir and Maksudur, R. Khan (2016) Investigation of Polymer Degradation by Adding Magnesium. International Journal of Polymer Analysis and Characterization, 21 (2). pp. 156-162. ISSN 1023-666X

Rahman, Md. Wasikur and Alam, Md. Jahangir and Maksudur, R. Khan (2015) Investigation of Polymer Degradation by Addition of Magnesium. International Journal of Polymer Analysis and Characterization, 21 (2). pp. 156-162. ISSN 1023-666X (print); 1563-5341 (online)

Rais Hanizam, Madon (2008) Fabrication and characterization of chitosan (CS) and chitosan (CS) blended polyvinyl alcohol (PVA) membrane with polyethylene glycol (PEG) 600 as additive. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Raja Hartieni, Raja Muhamad Tamrin (2013) Optimization of biohydrogen from palm oil mill effluent (POME) using immobilized biomass. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Raja Nur Nadhirah, Raja Othman (2012) Solubility study of 2,6- dihydroxybenzoic acid in o-xylene, methanol and acetonitrile using HPLC method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Rajan, Jose (2016) Nanostructured Materials: Less is More. Technical Report. Penerbit Universiti Malaysia Pahang , Kuantan.

Rajan, Jose and P. S., Archana and A., Le Viet and E., Naveen Kumar and Mashitah, M. Y. and S., Ramakrishna (2011) Tailoring Electron Diffusion thriugh Metal Oxide Nanostructures for Dye-sensitized Solar Cells. In: Tech Connect World 2011 Summit, Conference & Expo, 13-16 June 2011 , Hynes Convention Center, Boston, Massachusetts, USA. pp. 775-778..

Rajanderan, R Sothilakshmi (2010) Demulsification of water-in-crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Rajandran, Kanagaraj (2013) Bioethanol production from cassava by fermentation process using Saccharomyces Cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ramakrishnan, Ramprasath and Jolius, Gimbun and Fahmi, Samsuri and Vigneswaran, Narayanamurthy and Gajendran, Natarajan and Lakshmi, Yamini Sudha and Stranska, Denisa and Ranganathan, Balu (2016) Needleless Electrospinning Technology - An Entrepreneurial Perspective. Indian Journal of Science and Technology, 9 (15). pp. 1-11. ISSN 0974-6846 (Print); 0974-5645 (Online)

Raman, Dinesh Kumar (2013) Optimization and characterization of glycolysis of waste polyethylene terephthalate (PET) with polyethylene glycol (PEG). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ramanan, Perumal (2010) Production of natural protein using chicken feather. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ramanathan, Geetha (2012) Investigating the effect of magnetic force on the flow behavior of pipeline. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ranitha, Mathialagan (2012) Extraction and characterization of essential oil from ginger (Zingiber Officinale Roscoe) and lemongrass (Cymbopogon Citratus) by microwave-assisted hydrodistillation (MAHD). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ranitha, Mathialagan (2014) Identification and optimization of lemongrass essential oils extracted by hydrodistillation and microwave assisted hydrodistillation methods. Masters thesis, Universiti Malaysia Pahang.

Ranitha, Mathialagan and Abdurahman, H. Nour and Ahmad Ziad, Sulaiman and Azhari, H. Nour and Thana, Raj S. (2014) A Comparative Study of Lemongrass (Cymbopogon Citratus) Essential Oil Extracted by Microwave-Assisted Hydrodistillation (MAHD) and Conventional Hydrodistillation (HD) Method. International Journal of Chemical Engineering and Applications (IJCEA), 5 (2). pp. 104-108. ISSN 2010-0221

Ranitha, Mathialagan and N. H., Abdurahman and Ziad, A.S and Azhari, H. Nour and Thana, Raj. S. (2014) Comparison of Essential Oil of Lemongrass (Cymbopogon Citratus) Extracted with Microwave-Assisted Hydrodistillation (MAHD) and Conventional Hydrodistillation (HD) Method. Australian Journal of Basic and Applied Sciences, 8 (19). pp. 72-76. ISSN 1991-8178

Rasha, Mohammed Abd (2015) Emulsification and demulsification of water-in-crude oil emulsion via microwave-assisted chemical treatment. PhD thesis, Universiti Malaysia Pahang.

Rashed, K. Musaab and Hayder A., Abdul Bari and Mohamad Amran, Mohd Salleh and M. Halim Shah, Ismail (2016) Rotating Disk Apparatus: Types, Developments and Future Applications. Modern Applied Science, 10 (8). pp. 198-229. ISSN 1913-1844 (printed), 1913-1852 (online)

Rashed, Musaab K. and Hayder A., Abdul Bari and Mohamad Amran, Mohd Salleh and M Halim Shah, Ismail (2017) Effect of Structure Height on the Drag Reduction Performance using Rotating Disk Apparatus. Fluid Dynamics Research, 49 (015507). pp. 1-13. ISSN 1873-7005

Rashid, Khalid T. and Sunarti, Abd Rahman (2016) Enhancement the Flux of VDF-co-HFP Hollow Fiber Membranes for Direct Contact Membrane Distillation Applications. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2189-2192. ISSN 1819-6608

Rashid, Khalid T. and Sunarti, Abd Rahman and Alsalhy, Qusay (2016) Optimum Operating Parameters for Hollow Fiber Membranes in Direct Contact Membrane Distillation. Arabian Journal for Science and Engineering, 41 (7). pp. 2647-2658. ISSN 1319-8025 (print); 2191-4281 (online)

Rashid, Shah Samiur and Ishmael, Ukaegbu Chinonso and Chibuike, Ukaegbu Benjamin and Basheer, Esmail Abdullah Mohammed (2014) Effects of Pregnancy on Serum Calcium, Magnesium and Inorganic Phosphate Ions in Relation to Osteo-Diseases. Journal of Biotechnology Science Research (JBSR) , 1 (2). pp. 22-29. ISSN 2328-3505

Rassem, Hesham H. A. and N. H., Abdurahman and R. M., Yunus (2016) Techniques For Extraction of Essential Oils From Plants: A Review. Australian Journal of Basic and Applied Sciences, 10 (16). pp. 117-127. ISSN 1991-8178

Rassem, Hesham H.A. and N. H., Abdurahman (2016) Synthesis, Spectral Characterization and Crystal Structure of (E)-4- Hydroxy-N -(2-methoxybenzylidene) benzohydrazide. Australian Journal of Basic and Applied Sciences, 10 (1). pp. 513-516. ISSN 1991-8178

Ravinder, Kumar and Singh, Lakhveer and A. W., Zularisam (2016) Exoelectrogens: Recent Advances in Molecular Drivers Involved in Extracellular Electron Transfer and Strategies used to Improve it for Microbial Fuel Cell Applications. Renewable and Sustainable Energy Reviews, 56 . pp. 1322-1336. ISSN 1364-0321

Rebecca, Stephen (2015) Treatment of industrial oleochemical wastewater by electrocoagulation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Redza Shah, Azmeer Hasanudin (2009) Concentration of biopetrol synthesized from palmitic acid through catalytic craking using granular metal as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rehan, Zainol Abidin and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim (2016) Impregnation of K+ Over Deoiled Spent Bleaching Clay (SBC) as a Catalyst in Transesterification. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 1-5..

Riduan, Abd. Ghani (2006) Effects of temperature in reactive distillation of vapor from catalytic pentaerythritol tetradodecanoate (petd) reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ridwan, Yusman (2010) Concentration of biopetrol synthesized from oleic acid through heterogeneous catalytic cracking using zeolite as catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ridzuan, Ramli and Maksudur, R. Khan and Chowdhury, Najmul Kabir and M. D. H., Beg and Rohaya, Mohamed Halim and Astimar, Abdul Aziz and Zawawi, Ibrahim and Nahrul Hayawin, Zainal (2013) Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite. Advances in Nanoparticles, 2 . pp. 358-365.

Ridzuan, Ramli and Maksudur, R. Khan and M. Y., Rosli and Ruey Ong, Huei and Rohaya, Mohamed Halim and Astimar, Abdul Aziz and Zawari, Ibrahim and Nahrul Hayawin, Zainal (2014) In-Situ Impregnation of Copper Nanoparticles on Palm Empty Fruit Bunch Powder. Advances in Nanoparticles, 3 (3). pp. 65-71. ISSN 2169-0510 (print); 2169-0529 (online)

Rihab Hussein , Jawad (2010) Production of biosurfactant from locally isolated bacteria. Masters thesis, UNIVERSITI MALAYSIA PAHANG.

Ritu, Gupta and Norrozila, Sulaiman and Arun, Gupta and M. D. H., Beg (2014) WPC Soft: Prototype Simulation Software to Predict the Internal Changes During Hot Pressing of Wood Plastic Composites. Chemical Product and Process Modeling, 9 (1). pp. 45-57. ISSN 2194-6159 (print); 1934-2659 (online)

Robiatun Ain, Maidin (2013) Extraction and characterization of gelatine from chicken skin. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rodianah, Alias (2013) An Inexpensive & Safe Method for Preparation of Caryophyllene Oxide. Masters thesis, Universiti Malaysia Pahang.

Rodianah, Alias (2009) The effect of substrate and enzyme concentration to the fructooligosaccharides (FOS) production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rohaida, Che Man and Ahmad Fauzi, Ismail and Nazlee Faisal, Ghazali and Rosli, Md Illias (2014) Improvement of Cyclodextrin Glucanotranferase (CGTase) Secretion by Recombinant Escherichia Coli Immobilized on Hollow Fiber Membrane Using Full Factorial Design. In: International Symposium on Green Manufacturing and Applications, 24-28th June 2014 , Busan, Korea. .

Rohaida, Che Man and Ahmad Fauzi, Ismail and Nazlee Faisal, Ghazali and Siti Fatimah Zaharah, Mohd Fuzi and Rosli, Md Illias (2015) Effects of the Immobilization of Recombinant Escherichia Coli on Cyclodextrin Glucanotransferase (CGTase) Excretion and Cell Viability. Biochemical Engineering Journal, 98 . pp. 91-98. ISSN 1369-703X

Rohaida, Che Man and Ahmad Fauzi, Ismail and Siti Fatima Zaharah, Mohd Fuzi and Nazlee Faisal, Ghazali and Rosli, Md Illias (2016) Effects of Culture Conditions of Immobilized Recombinant Escherichia coli on Cyclodextrin Glucanotransferase (CGTase) Excretion and Cell Stability. Process Biochemistry, 51 (4). pp. 474-483. ISSN 1359-5113

Rohana, Abu and Woodley, John M. (2015) Application of Enzyme Coupling Reactions to Shift Thermodynamically Limited Biocatalytic Reactions. ChemCatChem, 7 (19). pp. 3094-3105. ISSN 1867-3899

Rohayu, Jusoh (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Malaysia Pahang.

Roshaiza, Muhamad (2012) Improvement of the Cold Flow Property of Biodiesel from Palm Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Roslina, Sapuan (2008) Simulation & data validation of small-scale LNG system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosmainiza, Ibrahimi Husaimi (2008) Development and characterization of sulfonated olyethersulfone membrane as a potential material for direct methanol fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosmawati, Naim and Khulbe, K.C. and A. Fauzi, Ismail and T., Matsuura (2013) Characterization of PVDF Hollow Fiber Membrane for CO2 Stripping by Atomic Force Microscopy Analysis. Separation and Purification Technology, 109 . pp. 98-106. ISSN 1383-5866

Rosmawati, Naim and A. Fauzi, Ismail (2013) Effect of Polymer Concentration on the Structure and Performance of PEI Hollow Fiber Membrane Contactor for CO2 Stripping. Journal of Hazardous Materials, 250-25 . pp. 354-361. ISSN 0304-3894

Rosmawati, Naim and Ahmad Fauzi, Ismail and Mansourizadeh, A. (2012) Effect of Non-Solvent Additives on the Structure and Performance of PVDF Hollow Fiber Membrane Contactor for CO2 Stripping. Journal of Membrane Science, 423-42 . pp. 503-513. ISSN 0376-7388

Rosmawati, Naim and Ahmad Fauzi, Ismail and Mansourizadeh, A. (2012) Preparation of Microporous PVDF Hollow Fiber Membrane Contactors for CO2 Stripping from Diethanolamine Solution. Journal of Membrane Science, 392-393 . pp. 29-37. ISSN 0376-7388

Rosmawati, Naim and Ahmad Fauzi, Ismail and N. B., Cheer and M. S., Abdullah (2013) Polyvinylidene Fluoride and Polyetherimide Hollow Fiber Membranes for CO2 Stripping in Membrane Contactor. Chemical Engineering Research and Design, 92 (7). pp. 1391-1398. ISSN 0263-8762

Rosmawati, Naim and Sureena, Abdullah and N., Zulkifli (2016) Characterization Study of PVDF/ Cloisite Hollow Fiber Membrane in Aqueous Diethanolamine. Journal Applied Membrane Science & Technology, 18 . pp. 9-14.

Rossyuhaida, Mohd Zakria (2015) Improved bioethanol production from oil palm trunk sap. Masters thesis, Universiti Malaysia Pahang.

Rossyuhaida, Mohd Zakria and Chua, Gek Kee and Jolius, Gimbun and Nor Shahirah, Mohd Nasir and Sook, Fun Pang and Farida Asras, Mohd Fazli and C. K., Cheng and Ahmad Ziad, Sulaiman (2015) Optimisation of Bioethanol Yield from Oil Palm Trunk Sap. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 340-346. ISBN 978-967-0257-53-2

Rossyuhaida, Mohd Zakria and Jolius, Gimbun and Mohd Fazli Farida, Asras and Chua, Gek Kee (2016) Magnesium Sulphate and β-alanine Enhanced the Ability of Kluyveromyces Marxianus Producing Bioethanol using Oil Palm Trunk Sap. Biofuels . pp. 1-9. ISSN 1759-7269(Print); 1759-7277(Online)

Roswani, Shaimi (2010) Extraction of papain enzyme from papaya leaves using enzyme assisted method. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Roy, Partha Catalyst-free synthesis of carbon nanospheres for potential biomedical applications: waste to wealth approach†. RSC Advances, 5 . pp. 24528-24533. ISSN 2046-2069

Rozialfi, Alwaner (2010) Dilute sulfuric acid pretreatment for cellulose recovery from sawdust. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Rubaiyi, M. Zaid and A. W., Zularisam and A. M. M., Sakinah (2016) Ultrasound-assisted Extraction and Characterizations of Pectins from Dragon Fruit (Hylocereus polyrhizus) Peels in Various Acid Solution: A Preliminary Study. In: International Conference in Organic Chemistry (ICOS2016), 21-24 August 2016 , Kuching, Sarawak, Malaysia. pp. 1-7..

Rubyatul Jannah, Ismail (2012) Cation exchanger mixed matrix membrane for copper removal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Rumana, Ghufran (2012) Enhanced Anaerobic Degradation Of Palm Oil Mill Effluent Using Butyrate, Cao-Ckd And Denitrifying Sulfide Removal. PhD thesis, Universiti Malaysia Pahang.

Ruwaida, Awang (2010) Removal of malachite green from aqueous solution by using dried water hyacith (Eichhornia crassipes). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ruwaida, Abdul Rashid and Kevin, J. Hughes and Peter, J. Heggs and Mohamed, Pourkashanian (2014) Evaluation of Biomass Introduction Methods in Coal Co-Gasification. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 8 (12). pp. 1267-1270.

Ruwaida, Abdul Rashid and Mohammad Hafizuddin, Mohd Yusoff (2016) The Potential Of Co2 Torrefaction As Biomass Pretreatment Method. In: European Conference on Renewable Energy Systems, 28-31 August 2016 , Yildiz Technical University Convention Center. . (Unpublished)

Ruzinah, Isha and Nurul Hariyah, Abd Majid (2014) Hybrid Ti02 in Photocatalytic Seawater Desalination : Effect of Operating Time. In: International Conference On Global Sustainability And Chemical Engineering (ICGSCE 2014), 20-22 August 2014 , Kuala Lumpur. .

Ruzinah, Isha (2015) 10 pelajar FKKSA tempa kejayaan dalam Simposium Kejuruteraan Kimia. CREATE . p. 9. ISSN 1823-7487

Ruzinah, Isha and Mohd Ridzuan, Nordin and Dewayanto, Nugroho (2014) Use of Palm Oil Decanter Cake as a New Substrate for the Production of Bio-oil by Vacuum Pyrolysis. Energy Conversion and Management, 86 . pp. 226-232. ISSN 0196-8904

S

S Muhammad Al-Hafiz, Muhammad (2009) A study on microwave-assisted extraction of zingiber aromaticum. Universiti Malaysia Pahang, Faculty of Chemical & Natural Resources Engineering.

S. I., Rani and B. A., Aziz and Jolius, Gimbun (2015) Analysis of Dust Distribution in Silo During Axial Filling using Computational Fluid Dynamic. Process Safety And Environmental Protection, 96 . pp. 14-21. ISSN 0957-5820

S. M., Rafiqul Islam and A. M. M., Sakinah (2014) Biochemical Properties of Xylose Reductase Prepared from Adapted Strain of Candida tropicalis. Applied Biochemistry and Biotechnology . ISSN 0273-2289

S. M., Rafiqul Islam and A. M. M., Sakinah (2014) Production Of Xylose Reductase From Adapted Candida Tropicalis Grown In Sawdust Hydrolysate. Biocatalysis and Agricultural Biotechnology, 3 . pp. 227-235. ISSN 1878-8181

S. M., Rafiqul Islam and A. M. M., Sakinah and A. W., Zularisam (2015) Enzymatic Production of Bioxylitol from Sawdust Hydrolysate: Screening of Process Parameters. Applied Biochemistry and Biotechnology, 176 (4). pp. 1071-1083. ISSN 1559-0291

S. M., Rafiqul Islam and A. M. M., Sakinah and A. W., Zularisam (2015) Evaluation of Sawdust Hemicellulosic Hydrolysate for Bioproduction of Xylitol by Enzyme Xylose Reductase. Food and Bioproducts Processing, 94 . pp. 82-89. ISSN 0960-3085

S. M., Rafiqul Islam and A. M. M., Sakinah and A. W., Zularisam (2014) Inhibition By Toxic Compounds In The Hemicellulosic Hydrolysates On The Activity Of Xylose Reductase From Candida Tropicalis. Biotechnology Letters, 37 (1). pp. 191-196. ISSN 1573-6776

S. M., Rafiqul Islam and A. M. M., Sakinah and M. R., Karim (2014) Production of Xylose from Meranti Wood Sawdust by Dilute Acid Hydrolysis. Applied Biochemistry and Biotechnology, 174 (2). pp. 542-555. ISSN 1559-0291

S. S., Mahmood and M. S., Mat Shayuti and Z., Hassan and Hazlina, Husin (2016) A Review on the Cords & Plies Reinforcement of Elastomeric Polymer Matrix. IOP Conference Series: Earth and Environmental Science, 36 . pp. 1-7. ISSN 1755-1315

S. Y., Chin and Haniif, Prasetiawan and Anwaruddin, Hisyam and Abdullah, Azahari and Ikmal Hisham, Maharon (2014) Customised Simulation Tool For The Industrial Propane Dehydrogenation Reactor. In: 2nd National Conference Knowledge Transfer Programme (KTP02), 9-11 September 2014 , Putrajaya Marriot Hotel, Sepang . pp. 1-12..

S. Y., Chin (2011) Kinetic Model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor. World Academy of Science, Engineering and Technology, 76 (34). ISSN 2010-3778

S. Y., Chin and Anwaruddin, Hisyam and Norul Shahida, Che Din and Haniif, Prasetiawan and Abdullah, Azahari and Ikmal Hisham, Maharon (2013) Reactor Modeling and Simulation for Intensifying The Propylene Production In A Petrochemical Plant. In: 1st National Conference on Knowledge Transfer (KTP 01), 21 - 23 August 2013 , Hotel Equatorial Bangi, Selangor. pp. 1-10.. (Unpublished)

S. Y., Chin and Haniif, Prasetiawan and Anwaruddin, Hisyam and Abdullah, Azahari and Ikmal Hisham, Maharon (2015) Sensitivity Study of the Propane Dehydrogenation Process in an Industrial Radial Moving Bed Reactor. Journal of Engineering Science and Technology, 2 (1). pp. 62-74. ISSN 1823-4690

S. Y., Chin and M. A. A., Ahmad and M. R., Kamaruzaman and C. K., Cheng (2015) Kinetic Studies of the Esterification of Pure and Dilute Acrylic Acid with 2-ethyl Hexanol Catalysed by Amberlyst 15. Chemical Engineering Science, 129 . p. 116. ISSN 0009-2509

S. Y., Chin and M. R., Kamaruzaman (2014) Esterification of Acrylic Acid with Butanol to Butyl Acrylate over Sulfonated Polystyrene. In: Proceedings: Tailoring Sustainability through Chemical Reaction Engineering, 7-10 September 2014 , Bangkok Convention Centre, Thailand. pp. 442-443..

S. Y., Chin and M. R., Kamaruzaman and M. A. A., Ahmad (2016) Synthesis and Characterization of Dealuminated Ultra-Stable Zeolite Y Supported Cesium Salt of Phosphotungstic Acid for the Esterification of Acrylic Acid with Butanol. Chemical Engineering Communications, 203 (11). pp. 1515-1521. ISSN 0098-6445 (print); 1563-5201 (online)

S. Y., Chin and Mohd Amirul Asyraf, Ahmad and Muhammad Ridzuan, Kamaruzaman (2014) New Method For Acrylic Acid Recovery From Industrial Waste Water Via Esterification With 2-Ethyl Hexanol. Process Safety And Environmental Protection, 92 (6). pp. 522-531. ISSN 0957-5820

S. Z., Sulaiman and R. M., Kasmani and A., Mustafa (2015) Effects Of Obstacles On Premixed Hydrogen-Air Mixtures Explosion In Closed Pipe. Jurnal Teknologi (Sciences and Engineering), 75 (6). pp. 109-113. ISSN 0127-9696 (print); 2180-3722 (online)

S.M, Saufi and A.F., Ismail and M.S, Abdullah (2004) Polyacrylonitrile (PAN)-based Carbon Hollow Fiber Membrane For O2/N2 Gas Separation. In: . S. M. Saufi. Paper presented at Regional Symposium on Membrane Science and Technology 2004 (MST 2004), 2004 , Puteri Pan Pacific, Johor Bahru. . (Unpublished)

S.M, Saufi and Conan, J.Fee (2010) Batch Adsorption of Whey Protein onto Anion Exchange Mixed Matrix Membrane Chromatography. In: 2010 2nd International Conference on Chemical, Biological and Environmental Engineering , 2-4 November 2010 , Cairo, Egypt. .

S.M., Saufi and A.F., Ismail (2004) Formation of Carbon Membrane from Polyacrylonitrile (PAN) Hollow Fiber Membrane for Gas Separation. In: Symposium: 4th Seminar NSF 2004, 20-21 December 2004 , Hotel Vistana Penang. , Vol.42. (Unpublished)

S.S, Suradi and M. Y., Rosli (2009) Influence Pre-Treatment On The Properties Of Lignocellulose Based Biocomposite. In: The Proceeding of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. .

Sabreen, Ramzi Alfarra (2015) Biosorption of Cd (II), Cu (II), Fe (III) And Pb (II) from water system using moringa oleifera leaves. Masters thesis, Universiti Malaysia Pahang.

Sabtu, Rahimah (2012) Removal of acrylic acid (AA) from process water by using alumina. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Saha, Pradip and Maksudur, R. Khan and Deb, T. K. and Majumdar, S. and Alam, F. and Sarker, N. C. (2012) Enzymatic Hydrolysis of Rice Straw to Fermentable Sugar: Kinetic Study. Journal of Chemical Engineering, 27 (2). pp. 20-24. ISSN 2221-7436

Said, N. and Ahmad Shahroom, Mohd Shah and Malar V., Sivaguru and Syafiqah , A. Khairuddin and Hajar Athirah, M. Sukri and Aina A., Rahman (2016) Precious Nickel Recovery from Palm Oil Mill Fuel Ash Waste (NiPOMFAW) Using Acidic Leaching Extraction (ALE). Key Engineering Materials, 705 . pp. 374-379. ISSN 1013-9826 (print); 1662-9795 (online)

Said, N. and Fatimah A., Misebah and M. Y., Rosli and Mohd S., Mahmud and Ahmad Z., Sulaiman (2014) Conversion of Jatropha curcas Oil to Ester Biolubricant Using Solid Catalyst Derived from Saltwater Clam Shell Waste (SCSW). International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 8 (9). pp. 1023-1029. ISSN 1307-6892

Said, N. and Fatimah A., Misebah and Siti F., Haron and Nur S., Ghazali and M. Y., Rosli and Jolius, Gimbun (2014) Activated Paphia undulate Shells Waste (APSW): A Cost-Effective Catalyst for Biodiesel Synthesis from Rubber and Jatropha curcas Seeds Oil (RSOME & JSOME). International Journal of Chemical Engineering and Applications (IJCEA), 5 (6). pp. 483-488. ISSN 2010-0221

Said, N. and M. Y., Rosli and Azhari, H. Nour and Jolius, Gimbun and N. A. N., Azman and M. V., Sivaguru (2016) Restoration of Waste Cooking Oil (WCO) Using Alkaline Hydrolysis Technique (ALHYT) for Future Biodetergent. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6405-6410. ISSN 1819-6608

Said, N. and M. Y., Rosli and Azoddein, Abdul Aziz M. and Syafiqah, A. Khairuddin and Hajar Athirah, M. Sukri and Chuah, C. Wooi (2015) Green Palm Oil Mill Fuel Ash Zeolites (G-POMFAZ) Using Hydrothermal-Alkaline-Ultrasound Technique (HAUT). In: International Conference on Knowledge Transfer 2015, 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. . (Unpublished)

Said, N. and M. Y., Rosli and Azoddein, Abdul Aziz M. and Syafiqah , A. Khairuddin and Hajar Athirah, M. Sukri and Chuah, C. Wooi (2016) Synthesis of Green Palm Oil Mill Fuel Ash Zeolites (G-POMFAZ) Using Hydrothermal-Alkaline-Ultrasound Technique (HAUT). In: Proceedings of International Conference on Knowledge Transfer (ICKT'15), 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 198-205.. ISBN 978-967-394-255-8

Said, N. and Nurul A., Rosnan and Nur S., Ghazali and Jolius, Gimbun and N. H., Abdurahman and Siti F., Haron (2015) Economical Biodiesel Fuel Synthesis from Castor Oil Using Mussel Shell-Base Catalyst (MS-BC). Energy Procedia, 79 . 576 - 583. ISSN 1876-6102

Said, N. and Zulkarnain, Jema'at and Nurfariha F., Zakaria and Ahmad Z., Sulaiman (2013) Mixtures of S.rebaudiana Leaves and Stems Waste for Steviol g. (Steviosides) Synthesis Using Ethanol-Water Solvents. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Said, N. and Zulkarnain, Jema'at and Nurfariha Fathmi, Zakaria and Siti Farhana, Haron and N. S., Ghazali and Fatimah A., Misebah (2014) Mixtures of S. Rebaudiana Leaves and Stems Waste for Steviosides Synthesis Using Ethanol-Water Solvents. Journal of Engineering and Technology, 5 (2). pp. 51-62. ISSN 2180-3811

Said, Nurdin and Amalina, Roslan and Mazza Seddiq, A. Abbakar and Syafiqah , A. Khairuddin and Hajar Atirah, M. Sukri (2015) Rock Melon Activated Carbon (RMAC) for Removal of Cd(II), Ni(II) and Cu(II) from Wastewater: Kinetics and Adsorption Equilibrium. International Journal of Chemical Engineering and Applications (IJCEA), 6 (2). pp. 105-110. ISSN 2010-0221

Said, Nurdin and Nurul A., Rosnan and Nur S., Ghazali and Jolius, Gimbun and Abdurahman, H. Nour and Siti F., Haron (2015) Economical biodiesel fuel synthesis from castor oil using mussel shell-base catalyst (MS-BC). Energy Procedia . ISSN 1876-6102

Saidatul S., Jamari and Jonathan R., Howse (2012) The Effect of the Hydrothermal Carbonization Process on Palm Oil Empty Fruit Bunch. Biomass and Bioenergy, 47 . pp. 82-90. ISSN 0961-9534

Saidatul Shima, Jamari and Howse, Jonathan R. and Azlinna, A. Bakar (2013) A Morphological Study on the Carbon Particles from Wood Fiber Waste via Hydrothermal Carbonization Process. International Journal of Chemical Engineering and Applications (IJCEA), 4 (3). pp. 149-152. ISSN 2010-0221

Saidatul Shima, Jamari and Jonathan, H. R. and Sharifah Fathiyah, Sy Mohamad and Tanveer, K. A. (2014) Solid Biofuels from Hydrothermal Carbonization: A Comparative Study on Woody and Non-woody Biomass Material. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 823-828. ISSN 1991-8178

Saidatul Shima, Jamari and Kwo Wei, Teh (2016) Study on the Valorization of Rice Waste via Torrefaction Method. In: 5th International Conference on Chemical and Process Engineering (ICCPE 2016), 23-25 May 2016 , Jeju Island, South Korea. pp. 1-5.. (Unpublished)

Saidatul Shima, Jamari and Suriati, Ghazali and Wan Siti Nadiah, Wan Yaacob (2015) Effect of Superabsorbent Polymer Composite Filled Carbon Fiber Towards the Germination of Abelmoschus Esculentus. Journal of Advanced Agricultural Technologies , 2 (2). pp. 156-159. ISSN 2373-423X (Print); 2301-3737 (Online)

Saifuddin, Seth (2009) Analysis of bio-oil from palm oil wastes through batch pyrolysis process. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Saifuddin , Baharuddin (2013) Investigation on the hybridoma cell requirement of glucose and glutamine concentration for growth. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saima, Said and Abdullah, Ibrahim and Omme, Asma and Muhammad Saad, Khan and Junaid, Akhter (2013) Prince2 Methodology: An Innovative Way for Improving Performance of Malaysian Automotive Industry. Journal of Technology Management and Technopreneurship, 1 (1). pp. 101-116. ISSN 2231-7996

Saipolbarin , Ramli and Sumaiya, Zainal Abidin and Ahmad Fikri, Husin Biodiesel in Holy Quran: Among The Review of The Arabic Lexicography and Modern Science. Mediterranean Journal of Social Sciences, 6 (1). pp. 1-8. ISSN 2239 - 978X

Sakina, Shahabudin (2013) Epitope mapping and functional characterization of monoclonal antibodies against the tip-localized adhesions of CFA/I, CS17 and CS2 class 5 fimbriae of enterotoxigenic Escherichia coli. Masters thesis, The Pennsylvania State University.

Saleeza Azura , Sulaiman (2013) Extraction of essential oil from Cinnamomum Zeylanicum by various methods as a perfume oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Salina, Ahmad Safii (2015) Extraction kinetics of fatty acids ethyl esters (FAEE) from oil phase using aqueous ethanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sandanasamy, Jessinta and Azhari, H. Nour and Saiful Nizam, Tajuddin and N. H., Abdurahman (2014) Impact Of Geographic Variation On Physicochemical Properties Of Neem (Azadirachta Indica) Seed Oil. International Journal of Pharmaceutical Sciences and Research , 5 (10). pp. 4406-4413. ISSN 2320-5148 (print); 0975-8232 (online)

Sandaray, Parthiban (2013) Flooding phenomena in two immiscible liquids system : conceptual approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sandra Diana, Md Zin (2010) Production and characterization of bio oil from wood sawdust via fast pyrolysis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Sangeeeta, Manogaran (2014) Modeling of hydrogen and methane dispersion process in pipeline using computational fluid dynamic (cfd). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sanggie, Florence Wednna (2011) Process modeling and comparison study of acid gas removal unit by using different aqueous amines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Sanisah, Arsat (2008) Enzymatic - enhanced production of gaharu oil : effects of shaking speed and water/ gaharu ratio. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Sanmugam, Kumanan (2013) Charecterisation of Palm Oil Empty Fruit Bunch (POEFB) fiber via enzyme treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Santhana, Krishnan and A. W., Zularisam and Singh, Lakhveer and A. M. M., Sakinah (2016) Production of Biodiesel Using Tannery Fleshing as a Feedstock: An Investigation of Feedstock Pre-Treatment Via Solid-State Fermentation. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7354-7357. ISSN 1819-6608

Santhana, Krishnan and Singh, Lakhveer and A. M. M., Sakinah and Thakur, Sveta and A. W., Zularisam and Ghrayeb, Omar A. (2016) Role of Organic Loading Rate in Bioenergy Generation from Palm Oil Mill Effluent in a Two-Stage Up-Flow Anaerobic Sludge Blanket Continuous-Stirred Tank Reactor. Journal of Cleaner Production . pp. 1-6. ISSN 0959-6526 (print), 1879-1786 (online) (In Press)

Santhana, Krishnan and Singh, Lakhveer and A. M. M., Sakinah and Thakur, Sveta and A. W., Zularisam and Johan, Sohaili (2016) Effect of Organic Loading Rate on Hydrogen (H2) and Methane (CH4) Production in Two-stage Fermentation under Thermophilic Conditions using Palm Oil Mill Effluent (POME). Energy for Sustainable Development, 34 . pp. 130-138. ISSN 0973-0826

Saodah, Ali (2010) Production of plastic from sea algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saparudin, Wasimin (2010) Antibiotic purification by using metal ion affinity zeolite adsorbent. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Sapiyah , Mohd Sukri (2015) Physical properties, characterization and interaction mechanism study between barium sulphate and diethylenetriaminepentaacetic acid pentapotassium salt. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sathiappriya, Ramasamy (2014) Study the effect of ultrasonic membrane anaerobic system (umas) in treating landfill leachate and methane gas production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saw, Chin Hooi (2010) Turbulence slapping technique effect on the multiphase flow behavior in pipeline. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Saw, Wen Qi (2014) Study on fouling index of humic acid removal by polyethersulfone ultrafiltration membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Senthilnathan, B. and Maheswaran, A. and Gopalasatheeskumar, K. and Masilamani, K. and Raihana Z., Edros (2016) Formulation and Evaluation of Pregabalin Loaded Eudragit S100 Nanoparticles. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 64-70. ISSN 2289-697X

Ser Er, Chang (2012) Separation of crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Setiabudi, H. D. and Nurul, Ainirazali and S. F. R. M., Suhaimi and Fatin Nadia, Pauzi and K. H., Lim and S. Y., Chin (2015) CO2 reforming of CH4 over Ni/SBA-15 catalyst: Effect of Nickel Loading. In: 4th Conference on Emerging Energy and Process Technology (CONCEPT2015), 15-16 December 2015 , Melaka. . (Unpublished)

Setiabudi, H. D. and Rahimah, Jusoh@Awang and S. F. R. M., Suhaimi and S. F., Masrur (2016) Adsorption of Methylene Blue onto Oil Palm (Elaeis guineensis) Leaves: Process Optimization, Isotherm, Kinetics and Thermodynamic Studies. Journal of the Taiwan Institute of Chemical Engineers, 63 . pp. 363-370. ISSN 1876-1070

Seydametova, Emine and Jailani, Salihon and Norazwina, Zainol and Convey, Peter (2012) Production of Lovastatin by Penicillium spp. Soil Microfungi. International Journal of Chemical Engineering and Applications (IJCEA), 3 (5). pp. 337-339. ISSN 2010-0221

Seydametova, Emine (2015) Novel Pravastatin-Producing Penicillium janthinellum Strain Isolated from Soil. International Journal of Bioscience, Biochemistry and Bioinformatics, 5 (2). pp. 80-90. ISSN 2010-3638

Shabirah, Ezan (2014) Esterification of free fatty acids in simulated waste oil using novel solid acidic ionic liquid as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahabaldin, Rezania and Mohd Fadhil, Md Din and Siti Fatimah, Kamaruddin and Shazwin, Mat Taib and Singh, Lakhveer and Ee, Ling Yong and Farrah Aini, Dahalan (2016) Evaluation of Water Hyacinth (Eichhornia crassipes) as a Potential Raw Material Source for Briquette Production. Energy Procedia, 111 . pp. 768-773. ISSN 1876-6102

Shahaidah, Shariff (2010) Fabrication and antimicrobial analysis of composite biodegradable film from breadfruit. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Shahaidah , Shariff and C. K. M., Faizal and Shareena, Mohd Sharif (2014) Characterization of Bisphenol a MIP (BPA-MIP) Synthesizing. Journal of Applied Sciences, 14 (13). pp. 1455-1459. ISSN 1812-5654 (print); 1812-5662 (online)

Shaharin Anwar, Sulaiman and Guangul, Fiseha Mekonnen and Konda, Ramzy E. and Atnaw, Samson M. and Mohamad Nazmi, Moni (2016) Estimation of Moisture Content of Oil Palm Fronds through Correlation with Density for the Process of Gasification. BioResources, 11 (4). pp. 8941-8952. ISSN 1930-2126

Shaharuddin , Kormin (2012) Development and characterization of biodegradable blends of low density polyethylene (LDPE) incorperated with thermoplastic sago starch. Masters thesis, Universiti Malaysia Pahang.

Shahbudin, Sobki (2006) Crystallization characteristic of pentaerythritol tetralaurate (PETD). Faculty of Chemical Engineering & Natural Resources , Universiti Malaysia Pahang.

Shahid , Ali (2013) Activated cement clinker catalyst development for biodiesel production. Masters thesis, Universiti Malaysia Pahang.

Shahidatul Nadiah, Mhd Said (2008) Salt-added method for breaking azeotrope of binary IPA-water system : using aspen plus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahril, Mohamad (2006) Optimization of hydro distillation conditions for the production of essential oil from Alpinia galanga. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahrul Anuar, Abd Rahman (2010) Reinforcement of plastic using empty fruit bunch (EFB) of palm oil waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahrulnizam, Jamen (2006) Effects of temperature in reactive distillation of vapor from non-catalytic pentaerythritol tetradodecanoate (petd) reactor. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Shaik Ismail, Mohamed Ali (2014) Biogas reformation over pr-promoted ni/mgo. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shajaratuldur, Ismail (2009) Lignin degradation of banana stem wastes using aerobic Bacillus cereus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shalyda, Md Shaaran and Jamaliah, Md Jahim and Roshanida, A. Rahman and Ani, Idris and Abdul Munir, Abdul Murad and Rosli, Md Illias (2016) Silanized Maghemite for Cross-linked Enzyme Aggregates of Recombinant Xylanase from Trichoderma reesei. Journal of Molecular Catalysis B: Enzymatic, 133 . pp. 65-76. ISSN 1381-1177

Shamini, Gunaseelan (2014) Barrier, thermal and mechanical properties of polyurethane-modified clay nanocomposites for thermal insulation material. Masters thesis, Universiti Malaysia Pahang.

Shamini, Vesaya Kumaran (2014) Development of new method for dispersing nanofillers in polycaprolactone (pcl) nanocomposite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shamugam, Shanker (2012) Biopetrol synthesized from rubber seed oil using zeolite as catalyst:effect of hexane in solvent extraction of rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sharifah Ainun Nor, Khaidzi (2010) Effect of different type of solvents on asymmetric polysulfone membrane for co2/ch separation. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Sharifah Fathiyah, Sy Mohamad and Shahril, Mohamad and Azila, Abdul Aziz (2013) The Susceptibility of Aphids, Aphis gossypii Glover to Lauric Acid Based Natural Pesticide. Procedia Engineering, 53 . pp. 20-28. ISSN 1877-7058

Sharifah Nhatasha, Syed Jaafar (2006) Adsorption study - dye removal using clay. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharifah Nurnazihah, Syed Farman Syah (2009) Spray drying of a nanas comosus and physical properties of its powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharifah Rafidah, Syed Hamid (2010) A study on the effect of injection moulding process parameters to the properties of injected parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharifah Rahimah, Wan Mahdi (2012) Gas flow network analysis in putrajaya residential area using cox method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sharifah Shufiza Khaziri, Tuan Hadi (2013) Performance of red pigment production by Monascus purpureus at different extraction methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharifah Zureehan, Syed Othman (2011) An experimental study on LPG/H2O2 mixture for combustion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharma, Swati and Arun, Gupta and Syed Mohd Saufi, Tuan Chik and Chua, Gek Kee and Pradeep Kumar , Podde and Jayshree , Thraisingam and Malini, Subramaniam (2016) Extraction and Characterization of Keratin from Chicken Feather Waste Biomass: a study. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 693-699..

Sharmilla, Arumugam (2010) Development of heterogeneous base catayst for transesterification reaction. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Shazmier Shah, Dilbar Shah (2013) Improvement of drying process in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Shu Yin, Oh (2014) Modeling and simulation of crude distillation unit (CDU). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siddique, Md. Nurul Islam and A. M. M., Sakinah and A. W., Zularisam (2015) Feasibility Analysis of Anaerobic Co-Digestion of Activated Manure and Petrochemical Wastewater in Kuantan (Malaysia). Journal of Cleaner Production, 106 . pp. 380-388. ISSN 0959-6526 (print), 1879-1786 (online)

Siddique, Md. Nurul Islam and A. M. M., Sakinah and A. W., Zularisam (2014) Mesophilic and Thermophilic Biomethane Production by Co-Digesting Pretreated Petrochemical Wastewater With Beef and Dairy Cattle Manure. Journal of Industrial and Engineering Chemistry, 20 (1). pp. 331-337. ISSN 1226-086X

Siddique, Md. Nurul Islam and A. M. M., Sakinah and A. W., Zularisam (2013) Role of Hydrogen Peroxide (H2O2) Enhanced Anaerobic Co-digestion of Petrochemical Wastewater on Cycle Time Minimization During Biomethanation. Scientific Research and Essay , 8 (22). pp. 996-1009. ISSN 1992-2248

Siddique, Md. Nurul Islam and A. W., Zularisam and A. M. M., Sakinah (2015) Influence of Flow Rate Variation On Bio-Energy Generation During Anaerobic Co-Digestion. Journal of Industrial and Engineering Chemistry, 27 . pp. 44-49. ISSN 1226-086X

Siew, Kah Weng and C. K., Cheng and Jolius, Gimbun (2013) Glycerol Dry Reforming Over Alumina-Supported Nickel Catalysts. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Sin Wan, Lum (2015) A study into photocatalytic degradation of methylene blue and glycerol aqueous solution over copper ferrite catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Singanathan, Jayabalan (2010) Production of methane from palm oil mill effluent using membrane anaerobic system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Singh, Lakhveer and A. W., Zularisam and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and A. M. M., Sakinah (2013) Application of Immobilized Upflow Anaerobic Sludge Blanket Reactor Using Clostridium LS2 For Enhanced Biohydrogen Production and Treatment Efficiency of Palm Oil Mill Effluent. International Journal of Hydrogen Energy, 38 (5). pp. 2221-2229. ISSN 0360-3199

Singh, Lakhveer and A. W., Zularisam and Siddique, Md. Nurul Islam and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and A. M. M., Sakinah (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Clostridium Butyricum EB6 in Polyethylene Glycol. Process Biochemistry, 48 (2). pp. 294-298. ISSN 1359-5113

Singh, Lakhveer and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and A. M. M., Sakinah and A. W., Zularisam (2013) Application of Polyethylene Glycol Immobilized Clostridium sp. LS2 for Continuous Hydrogen Production From Palm Oil Mill Effluent in Upflow Anaerobic Sludge Blanket Reactor. Biochemical Engineering Journal, 70 . pp. 158-165. ISSN 1369-703X

Singh, Lakhveer and Siddiqui, Muhammad Faisal and Ahmad, Anwer and Mohd Hasbi, Ab. Rahim and A. M. M., Sakinah and A. W., Zularisam (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Mixed Culture. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 659-664. ISSN 1226-086X

Singh, Sharanjit and Omoregbe, Osaze and Tan, Ji Siang and Fahim, Fayaz and Dai-Viet, N. Vo (2016) A Short Review on Mesoporous Silica-Supported Catalysts for Methane Dry Reforming. In: National Conference For Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 238-242..

Singh, Sharanjit and Vo, Dai-Viet N. (2016) Bi-reforming of Methane with Steam and CO2 over Ni/La-SBA-15 Catalyst for Synthesis Gas Production. In: International Conference on Catalysis (iCAT 2016), 20-21 September 2016 , Johor Bahru. .

Sinnathamby, Guganeswaran (2010) Biodiesel production from Jatropha curcas via two-steps catalyzed process. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Sinnathamby, Guganeswaran (2010) Biodiesel production from jatropha curcas via two-steps catalyzed process. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Siow Yi, Sam (2012) Polymer nanocomposites based on functionalized carbon nanotubes. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Sita Fitriana, (2011) Efficient direct regeneration of true-to-type Pogostemon cablin benth from leaf explant and profile of essential oils. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Aisah, Jamil (2010) The effect of polymer concentration on the development of polysulfone (PSU) membrane for carbon dioxide(CO2)and methane (CH4) separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Aishah, Abd Wahid (2009) Biosorption of lead (II) from aqueous solutions by dried water hyacinth (Eichhornia Crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aishah, Mustafa (2006) Comparative studies on the purification process of bioethanol from rice husks. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aisyah, Yahya (2010) Spray drying of Ati-ati plant boiling extract. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Aisyah Radhiah, Mohamed (2012) Adsorption of methylene blue by using activated carbon from empty fruit bunch and palm press fiber. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Aisyah Radhiah, Mohamed @ Ayub (2013) Production of beta-keratin from chicken feathers. Masters thesis, Universiti Malaysia Pahang.

Siti Aminah, Sharif Babu (2009) Biosorption of zinc (II) from aqueous solution by using dried water hyacinth (Eichhornia crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aminah, Zakaria and Mohd Jufri, Zakaria and Mohamad Rizza, Othman and Mohd Kamaruddin, Abd Hamid (2014) 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. In: International Conference on Global Sustainability and Chemical Engineering (ICGSE) 2014, 20-22 August 2014 , Kuala Lumpur. .

Siti Amirah, Nor Effendi (2013) Permeability & characterization study of (polylactic acid) PLA-modified NA+ nanocomposites for packaging application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Amirah, Nal (2014) Heat transfer computation for crude oil flow along pipeline. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Amni Husna , Roslan (2013) The effect of recycled – high density polyethylene (hdpe) mixing ratio on the tensile strength of high density polyethylene (hdpe) polymer. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Badriah, Harun (2010) Development of hybrid membrane (polysulfone and zeolites) for gas separation application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fairun Annisha, Hassan (2013) Absorption study of bis phenol a using molecular imprinted membrane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Siti Faiznur, Daud (2013) Environmental Assessment of Alkali-Catalysed Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Farah Amirah, Ahmed (2015) Study effect of additive on PVDF membrane for CO2/N2 gas separation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Farhana, Haron (2012) To study the production viability of bio-briquette from oil palm decanter cake. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Faridah, Ab Rahman (2009) Analysis of agarwood oil composition via preparative thin layer chromatography. Universiti Malaysia Pahang, Faculty of Chemical & Natural Resources Engineering.

Siti Fatimah, Arifin (2009) Production of biodiesel from waste cooking oil and RBD palm oil using batch transesterification process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fatimah, Mohamad Ali (2010) Spray dried durian powder. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Fatin Raihanah , Mohd Suhaimi (2015) Potential of oil palm leaves as an adsorbent for the removal of methylene blue from aqueous solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fitriana, Alang Ahmat (2015) Modelling simultaneous nitritation and p-nitrophenol removal using aerobic granular biomass in a continuous airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Haizan , Mohd Mukhtar Affandi (2015) Optimization of bleaching earth and extraction of free fatty acid (FFA) in palm oil refinery process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Haizum , Abu Hassan (2013) Moringa oleifera a possible source of biodiesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hajar, Abdul Halim (2010) Biopetrol synthesized from rubber seed oil through heterogeneous catalytic cracking using kaolinite as catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Hajar, Mustafar (2012) Study on the effect of different preparation methods of dope solution on development of polyethersulfone MMMs for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Hajar, Mustapa (2008) Treatment of palm oil mill effluent via chitosan based on flocculation : a study of different concentration of solid and liquid chitosan. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hajar, Mat Zani and Mior Ahmad Khushairi, Mohd Zahari and Nina Suhaity, Azmi (2015) Optimization of Parameters Affecting Bioethanol Production from Oil Palm Frond Juice by Saccharomyces cerevisiae. In: Asian Congress on Biotechnology (ACB 2015), 15-19 November 2015 , Kuala Lumpur. . (Unpublished)

Siti Hajar, Mat Zani and Mior Ahmad Khushairi, Mohd Zahari and Nina Suhaity, Azmi (2015) Utilization of Oil Palm Frond (OPF) Juice for the Production of Bioethanol. In: National Postgraduate Conference 2015, 24-25 January 2015 , Universiti Malaysia Pahang. . (Unpublished)

Siti Hana, Abu Bakar (2014) Molecular interaction of patchouli extraction process using molecular dynamic simulation approach. PhD thesis, Universiti Malaysia Pahang.

Siti Hashimah, Mohd Hanif (2008) Fabrication of chitosan membrane : the effetcs of different polyethylene glycol compositions on membrane performance in oily wastewater treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hatijah, Mortan and Wan Ruhayu, Wan Ramli (2013) Preliminary Study on Factors that Enhanced the Production of Uricase by Aspergillus Flavus. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 513-515. ISSN 2010-3638

Siti Hazriah, Hamzah (2010) Effect of time and temperature on butanol production from palm oil mill effluent (POME) by anaerobic fermentation using clostridium beijerinckii. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Hazwani, Tahir (2010) Effect of pH on whey protein separation using high performance tangential flow filtration. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Ilyani, Rani and Jolius, Gimbun and B. A., Aziz (2013) Modeling of Gas-Solid Turbulence Flow in Silo. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 784-798..

Siti Ilyani, Rani and Jolius, Gimbun and Badhrulhisham, Abdul Aziz (2014) Prediction of Particles-Air Movement in Silo during Filling Operation. Open Journal of Inorganic Non-metallic Materials, 4 . pp. 21-27.

Siti Ilyani, Rani and B. A., Aziz and Jolius, Gimbun (2015) Analysis of Dust Distribution in Silo during Axial Filling using Computational Fluid Dynamics: Assessment on Dust Explosion Likelihood. Process Safety And Environmental Protection, 96 . pp. 14-21. ISSN 0957-5820

Siti Ilyani, Rani and Jolius, Gimbun and Badhrulhisham, Abdul Aziz (2014) CFD Simulation of Dust Cloud Formation in Silo. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 521-527. ISSN 1991-8178

Siti Irhith Bushrah , Noor Mahadi (2015) Palm oil-based polyol for coatings. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Khadijah, Ghazali (2010) Chemical modification and characterization of kenaf fiber. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Khadijah, Md Esa (2012) Production of PDMS/PEG-PVDF thin film composite membrane for CO2/N2 separation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Khairunnisa, Daud (2012) Production of extracellular protease enzyme by aspergillus niger. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Kholijah, Abdul Mudalip and M. R., Abu Bakar and Fatmawati, Adam and Parveen, Jamal and Z., Alam (2015) Investigating the Role of Molecular Interactions in Polymorphism of Mefenamic Acid in Ethyl Acetate Solution. In: 228th Symposium Of Malaysian Chemical Engineers (SOMCHE 2015), 21-22 October 2015 , Putrajaya. pp. 1-10.. (Unpublished)

Siti Kholijah, Abdul Mudalip and Mohd R., Abu Bakar and Parveen, Jamal and Fatmawati, Adam (2013) Solubility and Dissolution Thermodynamic Data of Mefenamic Acid Crystals in Different Classes of Organic Solvents. Journal of Chemical & Engineering Data, 58 (12). pp. 3447-3452. ISSN 0021-9568

Siti Mahira, Ahmad (2014) Extraction of kappa carrageenan from local edible seaweed. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Marni, Aziz (2008) Role of electrokinetic parameters on asymmetric ultrafiltration membrane flux and rejection during separation of bovine serum albumin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Murni, Mohamad Khadri (2010) Production of lignocelluloses from palm oil empty fruit bunch. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nabihah, Abdul Latif (2014) Determination of energy usage and potential environment impact (pei) of a vapor compression distillation system for production of water for injection (wfi) in pharmaceutical industries. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nadiah, Mustafa Kamal (2010) Effect of fermentation time and temperature on butanol production from palm oil mill effluent (POME) by using Clostridium Acebutylicum. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Nadirah, Md Zaini (2009) Production of mangifera indica powder using spray dryer and the effects of drying on its physical properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nafsiah, Mohamed Omar (2013) Production of Xylose from Oil Palm Trunk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Najibah, Abd Rahman (2013) Comparison of chemical solvent for co2 removal from power plant using amine scrubbing process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Natrah, Ismail (2012) Fabrication of bio composite from bacterial cellulose/starch. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Natrah , Ismail (2012) Fabrication of bio composite from bacterial cellulose. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Nazriah, Hamdan (2015) Catalyst deactivation study of the esterification of dilute acrylic acid with different concentration catalyzed by ion exchange resin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Noor Fahimah, Jusoh (2014) Identification of chemical constituents of agarwood (aquilaria malaccencis) oil extracted by supercritical fluid and hydrodistillation method. Masters thesis, Universiti Malaysia Pahang.

Siti Nor Ainda, Mazlan (2014) Mixed matrix membrane chromatography based on lewatit mp500 anion exchanger resin and lewatit cnp105 cation exchanger resin for whey protein fractionation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nor Azira , Mahmood @ Che Mood (2013) Treatment of fish wastewater by using water spinach (ipomoea aquatica) in an aquaponic system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Nor Fadhilah, Yasim (2015) Study on thermal decomposition and characterization of palm oil waste and forestry residues. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nor Fazruaini, Rusli (2011) Extraction and characterization of Malaysia pandan leaves by soxhlet method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Nor Shadila, Alias (2009) Effects of pH and temperature on glucose production from tapioca starch using enzymatic hydrolysis : a statistical approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Noraishah, Ismail and Usman D., Hamzah and Noor S., Nasri and Murtala M., Ahmed and Rahman, Mohsin (2014) Assessment of Porous Carbons Derived from Sustainable Palm Solid Waste for Carbon Dioxide Capture. Journal of Cleaner Production, 71 . pp. 148-157. ISSN 0959-6526 (print); 1879-1786 (online)

Siti Noraishah, Ismail and Norazwina, Zainol (2014) Factorial Analysis of Ferulic Acid Extraction from Banana Stem Waste. International Journal of Applied Engineering Research, 9 (20). pp. 6823-6833. ISSN 0973-4562

Siti Noraishah, Masoum Raman and Nur Aminatulmimi , Ismail and Saidatul Shima, Jamari (2016) Preparation and Characterization of Impregnated Commercial Rice Husks Activated Carbon with Piperazine for Carbon Dioxide (CO2) Capture. In: Proceedings of the 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016, 1-3 December 2016 , Miri, Sarawak, Malaysia. pp. 1-7..

Siti Norazimah, Mohamad Aziz and A. M. M., Sakinah (2016) Mixed Reverse Micellar Systems (MRMS) for Extraction of Erythromycin: Effect of Surfactant Concentration on Forward Extraction Step. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 927-932..

Siti Norazizah, Jamil (2010) Removal of iron (ii) using various activated sludge. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Norhaslina, Halim (2013) Synthesis on Bio Reaction Kinetics of Biodiesel Production from Rubber Seed Oil Using Lipase as the Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Siti Norhidayah, Abd Rahman (2014) Bioethanol production using oil palm trunk sap (opts) by kluyveromyces marxianus - effect of temperature and ph. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Norizat, Shikh Abdul Jalil (2016) UMP terima anugerah emas MSOSH 2015. Utusan Malaysia . p. 32.

Siti Normunira, Ramli (2014) Fabrication of nanofiltration hollow-fiber membrane for the separation of xylose-glucose. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Norsita, Mohd Rawi (2013) Regeneration and recycling hemodialysis membrane dialyzer. Masters thesis, Universiti Malaysia Pahang.

Siti Nudra Shafinie, Ab Aziz and El Hadad, Omar and Syarifah, Abd Rahim and Chew, Few Ne (2016) Solar Still: Water for the Future. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6411-6414. ISSN 1819-6608

Siti Nur Farahana, Ismail (2010) Fabrication and antimicrobial analysis of composite biodegradable film from yam starch. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Nur Khairunisa, Mohd Amir (2012) Development of bio-medical & cosmetic products from keratin protein:the production of anti aging cream with UV protection from chicken feathers. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Nur Khairunisa, Mohd Amir and Gupta, Arun and Syed Mohd Saufi, Tuan Chik and Kausar, Ahmad (2014) Development of Anti-Ageing Cream from Chicken Feathers. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (6). pp. 389-393. ISSN 0975-8585

Siti Nuraffini , Kamarulizam (2012) Formulation a dual effect natural drag reduction agent. Masters thesis, Universiti Malaysia Pahang.

Siti Nurul Aishah, Ahmad Nordin (2012) Effect of sulphuric acid concentration on oil palm empty fruit bunch (EFB) to produce advanced carbon product. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nuurul Huda, Mohammad Azmin (2009) Separation of crude oil emulsion via microwave heating technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Roseha, Mohd Hamzah (2012) Study on design and modelling of paper fibre recovery network. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Salasiah, Mohd Khalid (2014) Screening of carbamazepine-ibuprofen (cbz-ibu) co-crystal formation using stoichiometric method. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Salbiah, Mutalib (2013) Production of Bioethanol from Kundur [Benincisa Hispida (Thunb) Cogn]. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Sarah , Abdullah (2013) Optimization of enzymatic extraction of stevioside from stevia rebaudiana leaves by using cellulase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Suhaila, Mohd Rohani (2009) Natural gas dehydration using silicagel : fabrication of dehydration unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Umairah, Mokhtar and Chin, S. T. and Kee, C. L. and Low, M. Y. and Drummer, O. H. and Marriott, P. J. (2016) Rapid Determination of Sildenafil and Its Analogues in Dietary Supplements Using Gas Chromatography–Triple Quadrupole Mass Spectrometry. Journal of Pharmaceutical and Biomedical Analysis, 121 . pp. 188-196. ISSN 0731-7085

Siti Umairah , Mokhtar (2011) Application of dispersive liquid-liquid microextraction based on solidification of floating organic droplet in the analysis of anti-depressant drugs. Masters thesis, Universiti Teknologi Malaysia .

Siti Z., Sulaiman and Rafiziana, M. Kasman and Miss Kiah, H. M. and Kamarizan, Kidam and Mimi H., Hassim and Norazana, Ibrahim and Roshafima, R. Ali (2014) The Influence of 90 Degree Bends in Closed Pipe System on the Explosion Properties Using Hydrogen-Enriched Methane. Chemical Engineering Transactions, 36 . pp. 271-276. ISSN 2283-9216

Siti Zaleha, Abdullah (2009) Separation of crude oil emulsion via ultrasonic technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Zubaidah, Sulaiman and R. M., Kasmani and A., Mustafa (2014) Investigation on Premixed Hydrogen/air Explosion in Closed Pipeline. In: 10th International Symposium on Hazard, Prevention & Mitigation of Industrial Explosion, 10-13 June 2014 , Bergen, Norway. pp. 1-10..

Siti Zubaidah, Sulaiman (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia.

Siti Zubaidah, Sulaiman and R. M., Kasmani and A., Mustafa and Miss Hasimawaty, Mat Kiah (2015) Experimental and Simulation Study on Gas Explosion in Confined Pipe. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015), 25-27 November 2015 , Langkawi, Kedah. pp. 1-13.. (Unpublished)

Siti Zuhaila, Zulkepeli (2012) Formulation of natural non-toxic mouthwash lotion from extraction of jathropa curcas latex. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Zuulaika, Rejal (2010) Extraction of antioxidant, phenolic content and mineral content from guava peel. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Sivalingam, Narendran (2010) Studying the effect of carbon powder addition on the performance of natural mucilage dra flowing in aqueous media. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Sivanesan, Shanmugam (2008) Monitoring essential oil quality of Etilingera SP1 GC and GC-MS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Soh, Jiah Chee and Chong, Soo Ling and S. Y., Chin and C. K., Cheng (2017) Catalytic Performance of Commercial Zeolites Y as Catalyst for Ethylene Production from Ethanol Dehydration. Malaysian Journal of Catalysis, 2 . pp. 1-7. ISSN 0128-2581

Sook, Fun Pang and Jolius, Gimbun and Mashitah, M. Y. and Luqman Chuah, Abdullah (2015) Microencapsulation of Polyphenols from Orthosiphon stamineus Leaves Extracts using Polysaccharide and Protein. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology, 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 352-358..

Sook, Fun Pang and Mei, Zhu Lau and Mashitah, M. Y. and Jolius, Gimbun (2014) Extraction and Microencapsulation of Polyphenols from Orthosiphon Stamineus Leaves. Journal of Mechanical Engineering and Sciences (JMES) , 7 . pp. 1033-1041. ISSN 2289-4659 (print); 2231-8380 (online)

Souleyman, Ahmat Issaka (2012) Application of microwave and ultrasonic demulsification techniques on petroleum based emulsions. PhD thesis, Universiti Malaysia Pahang.

Sreejon, Das and Abu, Yousuf and Md. Nasir, Uddin and Maksudur, R. Khan and Ahmed Nazmus, Sakib (2014) Generation of Electricity from Whey: An Electrochemical Process. International Journal of Renewable Energy Research, 4 (3). pp. 784-790. ISSN 1309-0127

Sri Murni, Astuti (2011) Optimization process of binahong extraction and characterization study. Masters thesis, Universiti Malaysia Pahang.

Steaphnie Saiful, Ahmad Savaran (2012) Formulation and production of facial cream from papaya. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Su, Shiung Lam and Rock, Kee Liew and C. K., Cheng and Chase, Howard A. (2015) Catalytic Microwave Pyrolysis of Waste Engine Oil using Metallic Pyrolysis Char. Applied Catalysis B: Environmental, 176 . pp. 601-617. ISSN 0926-3373

Su, Shiung Lam and Wan Adibah, Wan Mahari and C. K., Cheng and Rozita, Omar and Cheng, Tung Chong and Chase, Howard A. (2016) Recovery of Diesel-Like Fuel from Waste Palm Oil by Pyrolysis using a Microwave Heated Bed of Activated Carbon. Energy, 115 . pp. 791-799. ISSN 0360-5442 (Print), 1873-6785 (Online)

Su Najwa, Mohamed (2010) Protein purification by using immobilized metal ions affinity zeolite adsorbent. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Subramaniam, Vissaliny (2010) Sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Sufinah, Yussof (2010) Development and characterization between polyethersulfone/polysulfone (PES/PSF) micible blend with primary polymer (PES and PSF) membrane for O2/N2 separation. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Suguna , Jeganathan (2015) Formulation of hair straightening cream from keratin protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Suhaimi, Mohd Sukri (2010) Modeling and simulation of the supersonic jet nozzle for oxygen injection system at electric arc furnace. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Suharti, Md Ishak (2012) Effect of sawdust species and particle size on xylose production. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sulaiman, S. Z. and Kasmani, R. M. and Mustafa, A. and Mohsin, R. (2013) Effect of Obstacle on Deflagration to Detonation Transition (DDT) in Closed Pipe or Channel–An Overview. Jurnal Teknologi, 66 (1). pp. 49-52. ISSN 2180-3722

Sumaiya, Zainal Abidin and Haigh, Kathleen F. and Vladisavljević, Goran T. and Saha, Basudeb (2013) Comparison Of Novozyme 435 And Purolite D5081 As Heterogeneous Catalysts For The Pretreatment Of Used Cooking Oil For Biodiesel Production. Fuel, 111 . pp. 186-193. ISSN 0016-2361

Sumaiya, Zainal Abidin and A., Luqman Chuah and Koay, Gregory F. L. and Salmiah, A. and P., Siwayanan and Choonga, Thomas S. Y. (2010) Effect of Solvent Concentration and Cooling Modes on Morphology, Particle Size Distribution, and Yield of Dihydroxystearic Acid (DHSA) Crystals. Particulate Science and Technology, 28 (3). pp. 236-246. ISSN 0272-6351 (Print); 1548-0046 (Online)

Sumaiya, Zainal Abidin and Vladisavljević, Goran T. and Saha, Basudeb (2014) Kinetics of Free Fatty Acid Esterification in Used Cooking Oil Using Ion Exchange Resin as Catalyst. In: International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2014), 15-16 Sepember 2014 , Paris, France. pp. 24-28.. (In Press)

Sumathi, S. and Anwaruddin, Hisyam and K., Ramesh (2014) Adsorption of Acrylic Acid from Process Water Using Activated Carbon Adsorption Equilibrium Study. In: International Conference on Global Sustainability and Chemical Engineering (ICGSE) 2014, 20-22 August 2014 , Kuala Lumpur. .

Sumi, Sumaia Aktar and Rahman, Md. Wasikur and Alam, Jahangir and Dafader, Nirmal Chandra and Manir, Serajum and Maksudur, R. Khan (2016) Irradiated Sodium–alginate/poly(ethylene oxide) Blend Films Improved by Methyl Acrylate Monomer. Journal of Applied Polymer Science, 133 (26). pp. 1-10. ISSN 1097-4628

Sunarti, Abd Rahman and A. L., Ahmad (2013) Optimization Studies on TFC Membrane for Membrane Gas Absorption (MGA) Application. IOP Conference Series: Materials Science and Engineering, 46 (1). pp. 1-15. ISSN 1757-8981 (Print), 1757-899X (Online)

Sunarti, Abd Rahman and A. L., Ahmad (2015) Performances of Automated Control System of Membrane Gas Absorption: Optimization Study. In: World Virtual Conference on Applied Sciences and Engineering Applications (WVCASEA 2015), 27- 29 March 2015 , Johor Bharu. , 8 (1). ISSN 1978-2993 (Unpublished)

Sunarti, Abd Rahman and Ahmad, A. L. (2015) Evaluation of Membrane Gas Absorption Performance by Using Various of Liquid Absorbents. International Journal of Engineering and Innovative Technology (IJEIT), 4 (8). pp. 10-12. ISSN 2277-3754

Sunarti, Abd Rahman and M. S., Abdul Wahab (2015) Development of PEBAX Based Membrane for Gas Separation: A Review. International Journal of Membrane Science and Technology, 2 . pp. 78-84. ISSN 2410 -1869

Sureena, Abdullah (2014) Hydrogen production via simultaneous methane reforming and water splitting processes using membrane reactor. PhD thesis, Newcastle University.

Surenthran, K Sundar (2014) Cellulose extraction via acid digester and alkaline digester from empty fruit bunch (efb) and banana trunk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Suria, Mahmud (2012) Analytical quantification method of protein denaturation in spray drying. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Suriati, Ghazali and Mariatti, Jaafar and Azizan, Aziz (2014) Synthesis of Silver Nanoparticles By Chemical Reduction Method: Effect of Reducing Agent and Surfactant Concentration. International Journal of Automotive and Mechanical Engineering (IJAME), 105 . pp. 1920-1927. ISSN 2229-8649 (Print); 2180-1606 (Online)

Suriati, Ghazali and Mariatti, Jaafar and Azizan, Aziz (2013) Synthesis of Silver Nanoparticles by Chemical Reduction Method and a Comparison Study of Silver-filled Epoxy Thin Film Composites. In: 3rd International Conference on the Advancement of Materials and Nanotechnology 2013 (ICAMN 2013), 19-22 November 2013 , Penang. pp. 1-5..

Suriati, Ghazali and Nurul F., Salim (2015) Green Synthesis of Silver Nanoparticle: Effect of Reaction PH and Temperature. In: International Conference on Chemistry and Chemical Engineering (ICCCE 2015), 14-15 May 2015 , Amsterdam, The Netherlands. .

Suriati, Ghazali and S., Jamari and N., Noordin and K. M., Tan (2016) Pyrolysis of Carbonaceous Particles and Properties of Carbonaceous-g-Poly(acrylic acid) Superabsorbent Polymer for Agricultural Applications. In: MATEC Web of Conferences: 5th International Conference on Chemical and Process Engineering (ICCPE 2016), 23-25 May 2016 , Jeju Island, Republic of Korea. pp. 1-6., 69 (06001). ISSN 2261-236X

Suriati, Ghazali and S., Jamari and Tan, Kui May (2016) Pyrolysis of Carbonaceous Particles and Properties of Carbonaceous-g-Poly (acrylic acid-co-acrylamide) Superabsorbent Polymer for Agricultural Applications. In: 5th International Conference on Chemical and Process Engineering (ICCPE 2016), 23-25 May 2016 , Jeju Island, South Korea. pp. 1-6., 69 (06001).

Suriyati, Saleh and Flensborg, Julie Pauline and Shoulaifar, Tooran Khazraie and Sarossy, Zsuzsa and Hansen, Brian Brun and Egsgaard, Helge and DeMartini, Nikolai and Jensen, Peter Arendt and Glarborg, Peter and Dam-Johansen, Kim (2014) Release of Chlorine and Sulfur during Biomass Torrefaction and Pyrolysis. Energy & Fuels, 28 (6). pp. 3738-3746. ISSN 0887-0624

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Efficient Fuel Pretreatment: Simultaneous Torrefaction and Grinding of Biomass. Energy and Fuels, 27 (12). pp. 7531-7540. ISSN 0887-0624 (Print); 1520-5029 (Online)

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Influence of Biomass Chemical Properties on Torrefaction Characteristics. Energy & Fuels, 27 (12). pp. 7541-7548. ISSN 0887-0624

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online)

Swee Leong, Lee (2012) Potential application derived from the essential oil of pandan leaves (Pandanus Amaryllifolis Roxb.). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sweeta, Akbari (2016) Formation of water in crude oil emulsions and microwave-assisted chemical demulsification. Masters thesis, Universiti Malaysia Pahang.

Syafiqah, Hud (2010) Glucose production from oil palm trunk. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Syaiful Nizam, Hassan and Anis Farina, Mansor and Aizil Haikal, Omar (2008) Biopetrol Production from Acids in Palm Oil Waste. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 12-22. ISSN 1985-5176

Syaimaa Rosman, Andrew (2010) Development of molecular imprinted biosorbent by using orange peel for Pb2+ removal from aqueous solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Syamsul, Abdullah and Z., Man and L., Ismail and M. I., Abdul Mutalib and M. A., Bustam (2014) Solubility Parameters based on Refractive Index Data of Ionic Liquid. Advanced Materials Research, 917 . pp. 45-55. ISSN 1022-6680 (print), 1662-8985 (online)

Syamsul, Abdullah and Z., Man (2016) Extractive Desulphurization on Model Oil using 1-Butyl-3-Methylimidazolium Tricyanomethane. In: International Congress On Natural Sciences and Engineering (ICNSE 2016), 18-22 April 2016 , Jeju Island, South Korea. . (Unpublished)

Syamsul, Abdullah and Z., Man and L., Ismail and A., Maulud and M. A., Bustam (2013) Ionic Liquids Classification for Fuel Desulphurization. International Journal of General Engineering and Technology (IJGET), 2 (2). pp. 29-38. ISSN 2278-9928

Syamsul, Abdullah and Z., Man and M. A., Bustam (2013) Investigation on Aromaticity Index and Double-Bond Equivalent of Aromatic Compounds and Ionic Liquids for Fuel Desulphurization. Journal of Chemistry . pp. 1-7.

Syamsutajri, Syamsol Bahri (2010) Fabrication and antimicrobial analysis of composite biodegradable film from chempedak seeds. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Syamsutajri, Syamsol Bahri (2016) Development of mesoscale oscillatory baffled reactor (MOBR) for bioethanol production. Masters thesis, Universiti Malaysia Pahang.

Syarifah, Abd Rahim and Chou, C. Tan and Noor Ashila, Ramle (2016) Carbamazepine-Fumaric Acid Co-Crystal Screening Using Solution Based Method. MATEC Web of Conferences, 69 . pp. 1-5. ISSN 2261-236X

Syarifah, Abd Rahim and Fatinah, Ab Rahman and Engku N. E. M., Nasir and Noor Ashila, Ramle (2015) Carbamazepine Co-crystal Screening with Dicarboxylic Acids Co-Crystal Formers. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9 (5). pp. 414-417.

Syarifah, Abd Rahim and M. I. E., Azizi (2015) Stirring Speed Effect On Carbamazepine Saccharin (CBZ-SAC) Co-Crystal Crystallization Process. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015), 25-27 November 2015 , Langkawi, Kedah. . (Unpublished)

Syarifah Norsuhaila, Syed Mahmud and Mohd Ashry, Jusoh and Salleh Eesaa, Jasim (2016) A Review: Method of Preparing Palm Oil Based Polyurethane. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 655-662..

Syaza Syafiqah, Muhamad Kamel (2015) Simulation study on forward osmosis desalination process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Syed Ahmad Farhan , Syed Ab Mutalib (2011) Modeling of single mixed refrigerant process for offshore natural gas liquefaction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Syed Mazwan, Syed Abd Rashid (2010) Improving the fluid catalytic cracking unit in term of energy consumption, a simulation study. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Syed Mohd Saufi, Tuan Chik and Fee, Conan J. (2013) Mixed Matrix Membrane Chromatography Based on Hydrophobic Interaction for Whey Protein Fractionation. Journal of Membrane Science, 444 . pp. 157-163. ISSN 0376-7388

Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman and Nurul Izwanie, Rasli (2016) Comparison of Chemical and UV Photo-Grafting Modification on Polyamide Microfiltration Membrane for the Preparation of Membrane Chromatography. Asian Journal of Chemistry , 28 (2). pp. 395-398. ISSN 0970-7077

Sylvia, Philip (2013) Transesterification of Castor Oil to Biodiesel by Using Magnesium Oxide as Solid-Base Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

T

T. K., Thanusha and R., Ramesh and N. A. F. A., Samad and Mohd Yusri, Mohd Yunus and K., Ramesh (2015) Measurement and Prediction of Fuel Oxygenates Mixtures Excess Thermophysical Properties - A Review. In: Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015), 11-13 October 2015 , Johor Bahru. pp. 1-8.. (Unpublished)

Taguchi, S. and Iwata, T. and Abe, H. and Doi, Y. and S. N., Aqida (2016) Poly(hydroxyalkanoate)s. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-28. ISBN 978-0-12-803581-8

Tai, Chan Kong (2015) Ethanol dry reforming for h2 production over lanthanide-group promoted Co/Al2O3 catalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Talhah-Abdullah, Amir (2012) Simulation of Hybrid Induction Heating Distillation for Wateroil Mix in Refinery Pond Utilities. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tam, Siow Fui (2010) Stability and chemical demulsification of water-in-crude oil emulsion (chemical method). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tam, Siow Fui (2009) Stability and chemical demulsification of water-in-crude oil emulsions (chemical method). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tan, Inn Shi (2010) Production of biodiesel through transesterification of sunflower oil using SiO2/50% H2SO4 solid acidic catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Evon (2014) Heat loss analysis of hydrodistillation of mangosteen pericarp. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, See Ying (2013) Microalgae for tertiary treatment of palm oil mill effluent (pome)- effect of light penetration and kinetic study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Suat Hian and Willy Wong, Xiu Fa (2015) Plant Stress Response Towards Different Light Spectrum. In: International Conference on Life Science & Biological Engineering, 4-6 November 2015 , Nagoya, Japan. . (Unpublished)

Tan, Swee Sing (2014) Formulation of grease from industrial waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Wei Jian (2014) Cerium promoted ni/mgo catalyst for glycerol reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan , Kim Pieu (2010) Comparison of microwave-assisted hydrodistillation with the conventional hydrodistillation method in the extraction of essential oil (lemongrass and star anise). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tan Ni, King (2013) Flow Study on Medium Size Pipeline Testing Loop. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tatt, Chan Wei (2013) Kinetic study of catalytic glycolysis of PET wastes with zinc acetate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Taufik, Abu Bakar (2013) Conceptual 3D design of batch distillation column by using AVEVA PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tawfiqullah, Ayoubi (2015) Stochastic modelling of time delay for solvent production by Clostridium Acetobutylicum P262. Masters thesis, Universiti Malaysia Pahang.

Tay, Joo Hui and Syakhsiah, Jaafar and Norhayati, Mohd Tahir (2014) Ionic Composition of Rainwater at Selected Sites of Kuantan, Pahang, Malaysia: A Preliminary Study. Bulletin of Environmental Contamination and Toxicology, 92 (3). pp. 329-333. ISSN 0007-4861

Tay, Hong Luan (2014) Simulation of reactive distillation column for 2-ethyl hexyl acrylate production from dilute acrylic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tea, Lei Kwan (2009) Optimum conditions for sucrose production using ultrasonic treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Teck Huai, Ng (2015) Synthesis of bio-lubricant by esterification of pelargonic acid with 2-ethylhexanol over amberlyst 36. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tee, Chin Chow (2014) Cerium promoted ni/mgo catalyst for biogas dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Teh Ubaidah, Noh (2010) The effectiveness of natural adsorbents for multi dye system. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Telun, Floris (2010) Experimental study of preparing sulfuric acid from sulfur dioxide using catalytic photosynthesis method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tengku Ahmad Firdaus, Tengku Zainal (2009) Effect of solidification time to the wall thickness created on the slush casting product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tengku Khamanur Azma, Tg. Mohd Zamri (2013) Melastoma malabathricum L . natural preservatives business plan. Masters thesis, Universiti Malaysia Pahang.

Tengku Khamanur Azma, Tg. Mohd Zamri and A. M. M., Sakinah and A. W., Zularisam (2016) Extraction Optimization of Natural Dye from Clitoria Ternatea Flower by OFAT. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 721-724..

Tengku Khamanur Azma, Tg. Mohd Zamri and A. M. M., Sakinah and A. W., Zularisam (2016) Optimization of Extraction of Natural Dye from Turmeric. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 571-576..

Tengku Mohd Fadzli, Tengku Amin (2010) A study of nitrogen dilution effect on the flammability limits of methane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tengku Mohd Nurul Naim, Tengku Jaapar (2013) Photo-reduction of Carbon Dioxide Using Zns Supported Kaolin in a Photo Catalytic Batch Reactor System. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Teoh, Tze Siang (2014) Study of the curing kinetics of synthetic and natural polyester blends. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tew, Seow Ting (2012) Phosphorylated orange adsorption gel for removal of selected heavy metals. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tg Farhana, T Kamarulzaman (2009) Optimization condition for palm oil fruit sterilization process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Thanimalay, Dinesh Raj (2012) Biopetrol synthesized from rubber seed oil through heterogeneous catalytic cracking using zeolites catalyst: effect of acetone in solvent extraction of rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Thaomadaran, Ghunavathy (2011) Composite of the recycled polypropylene reinforced with oil palm empty fruit bunch. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Tharmathas, Alagappan (2013) Microwave assisted thermal cracking of castor oil with zeolite as catalyst for possible biofuel production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Thavaselvan A/L, Superamaniam (2008) Extraction of essential oils from jasmine flower using solvent extraction method : a study on feed ratio effects. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Thavasigamani, Loshbinan (2008) Characterization and product indentification of sludge obtained from the recycling of lubricant into base oil. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Thong, Li Mun (2010) Investigation of turbulence slapping technique effect on the flow behavior in pipelines. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Thuraiya, Thaim and Ruwaida, Abdul Rashid (2016) Improvement Empty Fruit Bunch Properties through Torrefaction. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 114-121. ISSN 1991-8178

Thuraiya , Mohammad Thaim (2015) Study on the foaming tendency of ionic liquids of different anion and nmethyldiethanolamine (MDEA) for the removal of carbon dioxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tio, Thiam Boon (2010) Biodiesel production via homogeneous lewis acid catalyzed transesterification. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tiong, Chiong Chii (2013) Investigation of the joining of acrylic by low power CO2 laser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Toh, Ban Sheng (2009) Reverse engineering of mobile phone casing and analysis of weld-line defect. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Tuan Nor Imani, Tuan Yusof (2012) Biosorption of copper using rice husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tuan Rosmina, Tuan Ismail (2010) Biodegradable behavior of palm oil fiber reinforced starch biocomposite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tugau, Juan (2010) The effect of filler loading on the tensile strength of natural rubber compound. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

U

UMP, . (2012) Lynas bukan loji nuklear,hanya kilang kimia. Utusan Malaysia .

UMP, . (2011) MATRES’11 tingkat pemahaman pelajar minat kejuruteraan kimia. CREATE (43). ISSN 1823-7487

UMP, . (2011) Makmal Berpusat rancakkan aktiviti penyelidikan dan pengujian. CREATE (8). ISSN 1823-7487

UMP, . (2011) Penyelidik harumkan nama UMP di BIS 11’. CREATE . p. 26. ISSN 1823-7487

UMP, . (2013) Syarahan UMP berkaitan Lynas dihadiri 500 peserta. Utusan Malaysia .

UMP, . (2011) UMP anjur seminar kejuteraan kimia. Berita Harian .

UMP, . (2010) UMP di tempat kedua dalam NACES 2010. CREATE (35). ISSN 1823-7487

UMP, . (2011) UMP naib juara pertandingan NACES. Utusan Malaysia .

UMP, . (2013) UMP pantau aktiviti perkilangan Lynas. Metro .

UMP, LIB (2016) Banyak kebaikan, ada Omega-3. Sinar Harian . p. 4.

UMP, LIB (2010) Program Symbion tarik minat pelajar tentang bioteknologi. Utusan Malaysia .

UMP, PNC (2013) Kefahaman Sains dan Teknologi terhadap pembangunan industri kimia. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2013) Pelajar FKKSA menang pertandingan Chem-E-Car anjuran IEM. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2015) Pensyarah FKKSA menang Anugerah TESLA IBC Cambridge bagi penerbitan biografi. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2012) Penyelidik cipta nama di INPEX Amerika Syarikat. CREATE . p. 18. ISSN 1823-7487

UMP, PNC Professor Dato' Dr. Rosli shared knowledge on the function of ultrasound in engineering. Pekan Review, 7 . pp. 24-25. ISSN 2180-3099

UMP, PNC UMP Chemital Lab gets international accreditation. Pekan Review, 4 . p. 21. ISSN 2180-3099

UMP, PNC UMP gets second placing in NACES 2010. Pekan Review, 3 . p. 47. ISSN 2180-3099

UMP, PNC (2016) UMP jalin kerjasama dengan Dimension Bid bagi pengkomersilan produk industri minyak dan gas. UMP News . (Unpublished)

UMP, PNC (2014) UMP terima perisian kawalan simulasi minyak dan gas. CREATE . p. 24. ISSN 1823-7487

UMP, PNC Understanding science and technology in the development of a chemical industry. Pekan Review, 9 . p. 40. ISSN 2180-3099

Uddin, M. Rahim and Maksudur, R. Khan and Rahman, M. Wasikur and Yousuf, Abu and C. K., Cheng (2015) Photocatalytic Reduction of CO2 Into Methanol Over CuFe2O4/TiO2 under Visible Light Irradiation. Reaction Kinetics, Mechanisms and Catalysis, 116 (2). pp. 589-604. ISSN 1878-5190

Uddin, M. Rakib and Ferdous, Kaniz and Md. Arifur, Rahman and Anup, K. Roy and Maksudur, R. Khan (2013) Amylatic Activity of Agaricus and Moulds for the Production of Bioethanol. Chemical Engineering and Science, 1 (1). pp. 7-11. ISSN ISSN (Print): 2328-7381 ISSN (Online): 2328-7373

Umi Najwa, Maulad Mohd Noor (2012) Optimize The Production Of Charcoal From Local Bio-Material. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ummi Hajira, Khairuddin (2010) Formulation of medicinal toothpaste from jatropha carcus latex. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ummi Nor Husna, Husin (2009) Partial characterization of cyclodextrin glucanotransferase by Bacillus sp. TS1-1. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

V

Valerian Victor, Kong (2012) Elucidation of Sonochemical Reaction Kinetics of Biodiesel Production from Jatropha Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Veloo Kutty, Rajaletchumy (2010) Evaluation of palm oil mill effluent (POME) by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Veloo Kutty, Rajaletchumy and Chia, Sing Ling and Setyawati, Magdiel I. and Muthu, Madaswamy S. and Feng, Si-Shen and Leong, David Tai (2015) In vivo and ex vivo Proofs of Concept that Cetuximab Conjugated Vitamin E TPGS Micelles Increases Efficacy of Delivered Docetaxel Against Triple Negative Breast Cancer. Biomaterials, 63 . pp. 58-69. ISSN 0142-9612

Veloo Kutty, Rajaletchumy and Feng, Si-Shen (2013) Cetuximab Conjugated Vitamin E TPGS Micelles for Targeted Delivery of Docetaxel for Treatment of Triple Negative Breast Cancers. Biomaterials, 34 (38). pp. 10160-10171. ISSN 0142-9612

Veroneka, Semilin (2014) Production of soap from sesamum indicum (sesame seed). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Vickneswaran, Nagaratnam (2010) Pipe-line transportation of heavy oil-in-water emulsion. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Vidhyaa, Parooindran (2012) Antioxidant activity of different fractions from Tinospora crispa stems extracts. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Vignes, Rasiah (2015) Synthesis of iron based electrocatalyst for air-cathode mircrobial fuel cell (MFC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Vijay, Rajaindran (2010) Halba mucilage as a new drag reducing agent in aqueous media flowing in pipelines. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Vikinesh, Mariappan (2013) Production of Biodiesel From Microalgae Using Ultrasound. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Vo, Dai-Viet N. and Adesina, Adesoji A. (2014) Fischer-Tropsch Synthesis Over Promoted Molybdenum Carbide Catalysts: Catalyst Design And Kinetic Studies Of Fischer-Tropsch Synthesis For Green Fuel Production. Scholars' Press, Germany. ISBN 9783639712346

Vo, Dai-Viet N. and Arcotumapathy, Viswanathan and Alenazey, Feraih and Al-Otaibi, Raja L. and Alotaibi, Faisal M. and Adesina, Adesoji A. (2015) Mechanistic investigation of methane steam reforming over Ce-promoted Ni/SBA-15 catalyst. Appl Petrochem Res, 5 .

Vo, Dai-Viet N. and Selvarajah, Kavineshshen and Nguyen, Huu Huy Phuc and Abdullah, Bawadi and Alenazey, Feraih (2016) Syngas Production from Methane Dry Reforming Over Ni/Al2O3 Catalyst. Research on Chemical Intermediates, 42 (1). pp. 269-288. ISSN 0922-6168 (Print); 1568-5675 (Online)

W

Wafaa, Kamil Mahmood (2014) Elucidation of physio-chemical characterization of ultrasonic chemically demulsified crude oil. PhD thesis, Universiti Malaysia Pahang.

Wafiuddin, Md Ghazali and D. M. N., D. Idris and Azizul Helmi, Sofian and Siregar, J. P. and M. S. S., Edrus (2016) A Review on Failure Characteristics of Polymer Gear. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01029).

Wafiuddin, Md Ghazali and Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Nurazima, Ismail and Azizul Helmi, Sofian (2016) Design and Analysis of Tooth Impact Test Rig for Spur Gear. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015), 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Wahida, Amat Fadzil (2010) Extraction of Zingiber Zerumbet (L) Smith oil by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Wahida, Amat Fadzil and Najmuldeen, Ghazi Faisal (2015) One Layer Experimental Particleboard from Oil Palm Frond Particles and Empty Fruit Bunch Fibers. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 199-202. ISSN 2278-0181

Wahidah, Ab Rahman (2010) Removal of ferrum (II) from industrial waste water by using dried water hyacinth Eichhornia Crassipes. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Wai Kean, Sin (2015) Molecular simulation studies of MDEA absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wai Mun, Yap (2012) Production of methane from palm oil mill effluent by using iltrasonicated membrane anaerobic system (UMAS). Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Wai Mun, Low (2015) Process optimization for xylitol purification using liquid-liquid batch extraction : effect of volume ratios and number of stages. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Ahmad Saiful, Wan Muhamad Sukeri (2007) Development of bottom cavity of 4 liter bottle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Aliuddin, Wan Razdi (2012) Characterization and modification of castor oil extracted from the newly malaysian produced castor beans. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Wan Anis , Wan Azman (2010) Ultrasonic-assisted extraction (UAE) of tannins from stem bark of Jatropa Curcas. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Wan Hairani, Wan Na’aman (2014) Utilizing mlr technique in mspm system. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Jasrina, Wan Abd Ghani (2008) Preparation of biodiesel from waste cooking oil via two step batch catalyzed process with the aid of acid sulfuric and sodium hydroxide as the catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Johari, Wan Hanapi (2008) Room temperature of liquified petroleum gas (LPG) sensor based on p-La2O3/n-Fe2O3. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Mohd Faizal, Wan Ishak and Wan Mohd Hafizuddin, Wan Yussof (2016) Sistem rawatan air mudah alih mesra alam. UMP News . (Unpublished)

Wan Mohd Hafizuddin, Wan Yussof (2012) Ce-405: Evaluation of Quaternary Ammonium Catalysts for Transesterification of Triglycerides. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi, Kedah. .

Wan Mohd Hafizuddin, Wan Yussof (2012) Evaluation of heterogeneous quaternary ammonium catalyst for transesterification of trigycerides. PhD thesis, Newcastle University .

Wan Mohd Hafizuddin, Wan Yussof and Syamsutajri, Syamsol Bahri and Harvey, Adam P. (2015) Kinetic Modeling of Transesterification of Triacetin Using Synthesized Ion Exchange Resin (SIERs). International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 99-103.

Wan Mohd Huzaifi, W Ibrahim (2012) A Study on Temperature Control System For Biomass Gasification Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Muhamad Syafiq , Wan Ismail (2015) Physical properties, characterization & interaction mechanism study between iron (II) sulphate (FeSO4) and glutamic acid, N,N-diacetic acid, tetrasodium (GLDA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Muhammad Azamuddin, Wan Azmi (2014) Study on effects of soil properties towards corrosion of carbon steel pipeline. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Muhammad Syahmi, Wan Muhammad (2012) Design of minimum water network for global water operation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wan Muhd Farid, Wan Hamat (2012) Bioethanol Production from Sugar Cane Molasses. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norain, Awang Long (2013) Production of Methane Gas by Ultrasonic Membrane System (UMAS) Using Palm Oil Mill Effluent (POME) as a Substrate. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norazlinda, Wan Zakaria (2010) Effect to reflux ration on separation of azeotropic mixtures in batch distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norfazilah, Wan Ismail (2016) Sol-Gel Technology for Innovative Fabric Finishing - A Review. Journal of Sol-Gel Science and Technology, 78 (3). pp. 698-707. ISSN 0928-0707(Print); 1573-4846(Online)

Wan Norlinda Roshana, Mohd Nawi and Sharifah Rafidah, Wan Alwi and Zainuddin, Abdul Manan and Klemes, Jiří Jaromír (2016) Pinch Analysis Targeting for CO2 Total Site Planning. Clean Technologies and Environmental Policy, 18 (7). pp. 2227-2240. ISSN 1618-954X

Wan Nur Atikah, Ali (2014) Foaming behaviour of primary, secondary and tertiary aqueous solution of amine for the removal of carbon dioxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur Izzati, Riza (2014) Esterification of free fatty acid from simulated waste cooking oil using ionic liquid as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur Salwani, Wan Jusoh (2010) Synthesized biopetrol from rubber seeds: heterogeneous catalytic cracking by granular copper. Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Wan Nurfarah, Wan Ali (2009) A comparative study on milk protein separation using different technique. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nurmaisarah, Wan Hamaruddin (2012) Study of heat transfer in plate heat exchanger by using CFD simulation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wan Nurul Huda, Wan Zainal and Soon, Huat Tan and Mohd Azmier, Ahmad (2017) Carbon Membranes Prepared from a Polymer Blend of Polyethylene Glycol and Polyetherimide. Chemical Engineering and Technology, 40 (1). pp. 94-102. ISSN 1521-4125

Wan Nurul Najihah, Wan Ghafar (2015) Effect of metal oxide nanoparticle on curing kinetic of bioresin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nurul Zahida, Wan Abdul Jalil (2009) Extraction of antioxidant compounds from red pitaya using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Raimie, Wan Ramli (2008) Screening of xylanase producer from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Siti Atikah, Wan Omar and Ahmad Ziad, Sulaiman and Azilah, Ajit and Yusuf, Chisti and Adam, Leow Thean Chor (2016) Effect of Flow Rate, Duty Cycle, Amplitude and Treatment Time of Ultrasonic Regimens towards Escherichia coii Harbouring Lipase. In: Proceedings of the 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016, 1-3 December 2016 , Miri, Sarawak, Malaysia. pp. 1-5..

Wan Siti Atikah, Wan Omar and Ahmad Ziad, Sulaiman and Azilah, Ajit and Yusuf, Chisti and Mohd Hairul, Ab Rahim and Adam Leow, Thean Chor (2016) Transformation of pTrcHis and pUC8.2-14 into Escherichia coli BL21 (DE3). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 71-76..

Wan Siti Nadiah, Wan Yaacob and Saidatul Shima, Jamari and Suriati, Ghazali (2014) OPEFB Filler from Biomass in Superabsorbent Polymer Composite for Agriculture Application: A Comparative Study. ICGSCE 2014 . pp. 11-17.

Wan Zulaisa Amira, Wan Jusoh (2012) Study on the adsorption of zinc from waste ipa by using granular activated carbon. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman (2014) Preparation Isotactic Polyropylene Hydrophobic Microporous Flat Sheet via Tips for Membrane Contactor. In: International Conference On Global Sustainability And Chemical Engineering ( ICGSE )TY AND CHEMICAL ENGINEERING ( ICGSE ) . . (Unpublished)

Wan Zulaisa Amira, Wan Jusoh (2016) Optimizing isotactic polypropylene membrane preparation condition via tips for carbon dioxide and nitrogen separation. Masters thesis, Universiti Malaysia Pahang.

Weerana, Eh Kan and Jamil, Roslan and Ruzinah, Isha (2016) Effect of Calcination Temperature on Performance of Photocatalytic Reactor System for Seawater Pretreatment. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 230-237. ISSN 1978-2993

Weerana, Eh Kan and Ruzinah, Isha (2016) The Effect of Light Wavelength on Water Quality in Photocatalytic Seawater Pre-treatment. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 89-94..

Wei Chun, Choo (2015) Production of biogas from poultry manure wastewater : optimization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wi, Lihua and Liew, Kong Yong and Salimah, Shafii (2010) Preparation Of Palladium Nanoparticles Stabilized By Cyclodextrins In Aqueous Solution And Their Activity For Hydrogenation Of Palm Oil. In: International Conference On The Advancement Of Material And Nanotechnology Ii, 29 November – 1 December 2010 , The Prince Hotel And Residence, Kuala Lumpur. .

Wi Ven, Lai (2012) Production of methane from poultry manure. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Winetta Arianty, Ariffin (2008) Fabrication of chitosan and polyvinyl alcohol blend membrane with different concentrations PEG 400 as additive. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wong, Pei Wen (2010) Production of virgin coconut oil (VCO) via combination of microwave and centrifugation method. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Wong, Yih Tin (2006) Study of acrylamide formation in coffee during roasting. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wong Jing Zhi, Kelvin (2015) Effects of polyvinylpyrrolidone additive on the performance of hollow fiber ion exchanger mixed matrix membrane for copper removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Woon, Phui Law and Jolius, Gimbun (2015) Retrofits of a Partial Combustion Lance using a Computational Fluid Dynamics. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 320-326. ISBN 978-967-0257-53-2

Woon, Phui Law and Jolius, Gimbun (2015) A CFD Study Of A Partial Combustion Lance. Journal of Engineering Science and Technology, 10 (S. I.). pp. 68-78. ISSN 1823-4690

Woon, Phui Law and Jolius, Gimbun (2015) Evaluation of the Unsteady Turbulence Modelling and Thermal Insulation on the Performance of Partial Combustion Lance. Chemical Engineering Transactions, 45 . pp. 817-822. ISSN 2283-9216

Woon, Phui Law and Jolius, Gimbun (2016) Scale-Adaptive Simulation on the Reactive Turbulent Flow in a Partial Combustion Lance: Assessment of Thermal Insulators. Applied Thermal Engineering, 105 . pp. 887-893. ISSN 1359-4311

Wu, Lihua (2013) Synthesis of polymer-stabilized metallic nanoparticles and their hydrogenation activity for vegetable oil. Masters thesis, Universiti Malaysia Pahang.

Y

Yadav, Sumit Manohar and Kamal, Yusoh (2015) Mechanical And Physical Properties of Wood-Plastic Composites Made of Polypropylene, Wood Flour and Nanoclay. International Journal of Agricultural, Forestry & Plantation (IJAFP), 1 . pp. 1-10. ISSN 2462-1757

Yadav, Sumit Manohar and Kamal, Yusoh (2016) Modification of Pristine Nanoclay and its Application in Wood-Plastic Composite. e-Polymers, 16 (6). pp. 447-461. ISSN 2197-4586 (Print); 1618-7229 (Online)

Yadav, Sumit Manohar and Kamal, Yusoh (2016) Preparation and Characterization of Wood Plastic Composite Reinforced by Organoclay. Journal of the Indian Academy of Wood Science . pp. 1-14. ISSN 0972-172X(Print); 0976-8432(Online) (In Press)

Yana, Nuratri (2015) Assessing storage stability and mercury reduction of freeze-dried pseudomonas putida within different types of lyoprotectant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yee Ket, Chiew (2013) Optimization on acrylic acid plant by using Aspen Plus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yeo, Ryan Whye Seong (2014) Characterization of draw solution in forward osmosis process for the treatment of synthetic river water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yeoh, Teik Loon (2006) Screening of lignin degrader from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yeung, Cheryl Suet Ling (2010) Production of high temperature grease from waste lubricant sludge and silicone oil. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ying, Kong Zi (2013) Thermodynamic analysis of methane dry reforming. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Yok, Loke Kam (2013) Optimization of emulsion polymerization of styrene and methyl methacrylate (MMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yong Ming, Lee (2010) Vapor-liquid equilibria in the systems methyl oleate + methanol & methyl oleate + water. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Yu Xun, Teo (2015) Devolatilization studies of oil palm plantation residues via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yue , Wei Lee and Syed Mohd Saufi, Tuan Chik (2014) Regenerated Cellulose Membrane with Different Spacer Arm Length of Diamine Monomer for Membrane Chromatography. Advances in Environmental Biology, 8 (3). pp. 596-602. ISSN 1995-0756(Print); 1998-1066(Online)

Yuni Khalida, Riazuddin (2010) A comparative study on the extraction of betacyanin in the peel and flesh of dragon fruit. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Z

Za Iskandar, Mohd Dikui (2009) Extraction of essential oil from Murraya Koenigii leaves using ultrasonic-assisted solvent extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zaidatul Akmal, Mohd Mustapha (2010) Optimization of glucose production from sugarcane bagasse using response surface methodology (rsm). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Zainab, Yousif Shnain (2016) Solid-polymer-surfactant complexes for enhancing the flow in pipelines. PhD thesis, Universiti Malaysia Pahang.

Zainab, Yousif Shnain (2016) Solid-polymer-surfactant complexes for enhancing the flow in pipelines. PhD thesis, Universiti Malaysia Pahang.

Zainatul Bahiyah , Handani (2011) A Mixed Integer Linear Programming (MILP) Model for Optimal Design of Water Network. In: 4th International Conference on Modelling, Simulation and Applied Optimization, 19-21 April 2011 , Impiana KLCC Hotel & Spa Kuala Lumpur.. pp. 1-6..

Zaini, Hajar Hadyan Hani (2006) Bioethanol production from empty fruit bunch (EFB) of oil palm. Faculty of Chemical & Natural Reources Engineering, Universiti Malaysia Pahang.

Zainur Azizi, Zakaria (2009) Triton-X amphoteric surfactant as drag reducing agent in aqueous media flowing in pipelines with different pipe diameters. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zaman, Haydar U. and A. Khan, Ruhul and A. Khan, Mubarak and M. D. H., Beg (2013) Physico-Mechanical and Degradation Properties of Biodegradable Photografted Coir Fiber With Acrylic Monomers. Polymer Bulletin, 70 (8). pp. 2277-2290. ISSN 0170-0839(print); 1436-2449(online)

Zaman, Haydar U. and M. D. H., Beg (2014) Effect of CaCO3 Contents on the Properties of Polyethylene Nanocomposites Sheets. Fibers and Polymers, 15 (4). pp. 839-846. ISSN 1229-9197 (Print); 1875-0052 (Online)

Zareen, Seema and Akhtar, Muhammad Nadeem and Norsharina, Ismail and Maznah, Ismail and Syed Adnan, Ali Shah and Nordin, Lajis and Saiful Nizam, Tajuddin (2014) Neuroprotective Effect From Stem Bark Extracts of Knema laurina Against H2O2- and AB1-42-induced Cell Death in Human SH-SY5Y Cells. Natural Product Research: Formerly Natural Product Letters . ISSN 1478-6419 (print); 1478-6427 (online)

Zarifah Nadiah, Mohamad Salleh (2010) To produce the activated carbon from matured palm kernel shell. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Zatul Iffah, Mohd Arshad and Azura, Amid and Faridah, Yusof and Irwandi, Jaswir and Kausar, Ahmad and Loke, Show Pau (2014) Bromelain: an Overview of Industrial Application and Purification Strategies. Applied Microbiology and Biotechnology, 98 (17). pp. 7283-7297. ISSN 0175-7598

Zatul Iffah, Mohd Arshad and Azura, Amid and Muhd. Ezza Faiez, Othman (2015) Comparison of Different Cell Disruption Methods And Cell Extractant Buffers For Recombinant Bromelain Expressed in E.COLI BL21-A1. Jurnal Teknologi (Sciences and Engineering), 77 (24). pp. 83-87. ISSN 0127-9696 (print); 2180-3722 (online)

Zianon Abdin, Zianor Azrina (2010) Whey protein fraction based on Q-sepharose anion exchange chromatography. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Zianor Azrina, Z. A. and M. D. H., Beg and M. Y., Rosli and Ridzuan, Ramli and Norhafzan, Junadi and A. K. M., Moshiul Alam (2017) Spherical Nanocrystalline Cellulose (NCC) from Oil Palm Empty Fruit Bunch Pulp via Ultrasound Assisted Hydrolysis. Carbohydrate Polymers, 162 . pp. 115-120. ISSN 0144-8617

Zubair, Mat Isa (2008) Extraction of gaharu esential oil using ultrasonic assisted hydrodistillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zul Amri, A. Bakar (2008) Benchmarking of the actual injection of the product versus plastic simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulfadhli, Mohd (2012) Design formulation of rabbit feed based on palm kernel cake (PKC) and oil palm frond (OPF). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Zulhazleen, Mohd Zulkipli (2012) Separation Fermentation Products by Using Batch Distillation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zulhelmi, Ismail and Kamal, Yusoh (2016) Facile Method for Liquid-exfoliated Graphene Size Prediction by UV-visible Spectroscopy. AIP Conference Proceedings, 1756 (1). pp. 1-5. ISSN 0094-243X

Zulhilmi, Khamis (2014) Comparison of biodiesel synthesis rates when being intensified with liquid extraction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zulkifly, Jemaat and Tora, Josep Anton and Bartroli, Albert and Carrera, Julian and Perez, Julio (2015) Achievement of High Rate Nitritation with Aerobic Granular Sludge Reactors Enhanced by Sludge Recirculation Events. Frontiers of Environmental Science & Engineering, 9 (3). pp. 528-533. ISSN 2095-2201

Zulsyazwan, Ahmad Khushairi (2013) Optimization of Oil Palm Trunk Core Biodelignification Using Pleurotus Ostreatus. Masters thesis, Universiti Malaysia Pahang.

Zulsyazwan, Ahmad Khushairi (2009) Fabrication and characterization of composite biodegradable film made from empty fruit bunch. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zuraidah, Mohd Ali (2010) Development of pretreatment techniques for high productivity gaharu extraction. Masters thesis, Universiti Malaysia Pahang.

Zuriah, Ismail (2009) Permeability and selectivity study for polyethersulfone membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zuriana, Sidi Ahmad (2013) Production of Sorbitol from Meranti Wood Sawdust Using Solid State Fermentation (SSF) Process. Masters thesis, Universiti Malaysia Pahang.

Zuriana, Sidi Ahmad (2010) Effect of agitation rate on butanol and ethanol production from palm oil mill effluent by Clostridium acetobutylicum. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Zuriana, Sidi Ahmad and A. M. M., Sakinah and Farhan, Mohd Said (2016) Characterization of Meranti wood Sawdust and Removal of Lignin Content using Pre-treatment Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 598-606..

Zuriana, Sidi Ahmad and A. M. M., Sakinah and Farhan, Mohd Said (2016) Optimization Of Sorbitol Production Using Immobilized Of Lactobacillus Plantarum Strain (BAA-793) Via Solid State Fermentation (SSF) Process: Response Surface Methodology (RSM). Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 90-100. ISSN 1991-8178

Zuriana, Sidi Ahmad and A. M. M., Sakinah and Farhan, Mohd Said (2016) Production of Sorbitol from Meranti Wood Sawdust (MWS) using Immobilized Cells via Solid State Fermentation (SSF) Process: OFAT Study. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 591-597..

This list was generated on Tue Mar 28 16:50:24 2017 MYT.

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (noorul@ump.edu.my) OR
Cik Ratna Wilis Haryati (haryati@ump.edu.my)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my