UMP Institutional Repository

Remediation of oil and gas sewage effluents using physical treatments

Mohd Najib, Razali and Amira Ermafiqka, Anuar and Musfafikri, Musa and Najmuddin, Mohd Ramli (2020) Remediation of oil and gas sewage effluents using physical treatments. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 6 (1). pp. 12-19. ISSN 0126-8139

[img]
Preview
Pdf
Remediation of Oil and Gas Sewage Effluents Using Physical Treatments.pdf

Download (402kB) | Preview

Abstract

The industrial effluents from the oil and gas industry contain harmful contaminants that bring detrimental effects to the aquatic life and human population. The primary concerns are the high value of Chemical Oxygen Demand (COD), Total Suspended Solids (TSS), turbidity and heavy metal content such as ferum and copper in the effluents, which did not comply with the Environmental Quality Act (1974) Industrial Effluent (Regulations) 2009 of Malaysian Department of Environment (DOE). This research aims to study the efficiency of natural bio-coagulants in treating the industrial effluent from the oil and gas industry. The industrial effluent sample was treated by using two natural biocoagulants F.A and F.B and three commercial treatment agents (bio-solvent, alum, and poly aluminium chloride (PAC)). Different beakers consisting of 7.5 wt% of each agent were added into 1.5 L of wastewater sample and left for a week without mechanical assistance. For the second stage, only F.A and alum were used during the experiment. By using five different weight percentages: 2.5%, 5.0%, 7.5%, 10.0%, and 12.5%, the treatment agents were added into 100 ml of wastewater and left for a week without any mechanical assistance. Then, the samples were analyzed for each of the five parameters. The results showed F.A is the best agent in COD treatment, with 41% reduction; followed by alum with 36%, PAC with 26% and bio-solvent with 22% reduction, respectively. The obtained results also showed that F.A and alum are at optimum performances at 7.5 wt%. The F.A and alum efficiency are deteriorating when the dosage is below and above 7.5 wt%.

Item Type: Article
Uncontrolled Keywords: environment, COD reduction, Natural bio-coagulants, Industrial effluents, Alum
Subjects: T Technology > TP Chemical technology
Faculty/Division: Institute of Postgraduate Studies
Faculty of Chemical and Process Engineering Technology
Depositing User: Noorul Farina Arifin
Date Deposited: 10 Dec 2020 03:08
Last Modified: 10 Dec 2020 03:08
URI: http://umpir.ump.edu.my/id/eprint/30162
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item