UMP Institutional Repository

Composite zinc-fly ash coating on mild steel

Ezree Farhan, Abu Hanipah (2017) Composite zinc-fly ash coating on mild steel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

[img]
Preview
Pdf
Composite zinc-fly ash coating on mild steel - Table of contents.pdf - Accepted Version

Download (306kB) | Preview
[img]
Preview
Pdf
Composite zinc-fly ash coating on mild steel - Abstract.pdf - Accepted Version

Download (92kB) | Preview
[img]
Preview
Pdf
Composite zinc-fly ash coating on mild steel - Chapter 1.pdf - Accepted Version

Download (140kB) | Preview
[img]
Preview
Pdf
Composite zinc-fly ash coating on mild steel - References.pdf - Accepted Version

Download (97kB) | Preview

Abstract

The corrosion was one of the most crucial issues which mankind has been faced. Corrosion naturally impacts our daily life trough chemical reactions that occur on the surface of metal and will impair the function of metal. In addition, the production of waste fly ash from a thermal power plant shows an increasing each year and been disposed at the landfill. One of the solutions to prevent corrosion occurs on metal by coated the surface of metal. Recently, fly ash found that have a potential to work as an anti-corrosion agent because of the composition of fly ash rich in metals such as iron (Fe), aluminium (Al), silicon (Si) and magnesium (Mg). The objectives of this paper were to study the corrosion behaviour and to study the physical properties of anti-corrosion zinc –fly ash coating. Therefore, Zinc-fly ash coatings were deposited on mild steel substrates with used sodium silicate as a binder. Zinc powder and fly ash powder was being sieved first in order to get the fine powder for composite coating and mix with sodium silicate. The surface of mild steel has been coated with zinc-fly ash coating. The physical properties of zinc-fly ash coating were being tested by an adhesion test by the cross-cut method. The corrosion behaviour of coating were being tested by immersion test in 3.5% sodium chloride (NaCl) solution for 30 days and potentiodynamic polarization curve in 3.5% sodium chloride solution. The results form adhesion test found that by the addition of fly ash in composite coating increased the adhesion strength of the coating than without fly ash. The result from immersion test concluded that the addition of fly ash had less rested on the surface of mild steel. The result of potentiodynamic polarization curve show the zinc-fly ash coating exhibits a more protective film than a pure composite zinc coating with 50% compared to pure zinc coating.

Item Type: Undergraduates Project Papers
Additional Information: Project Paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2017, SV: AZIZUL HELMI BIN SUFIAN, NO. CD: 11212
Uncontrolled Keywords: Mild steel; zinc-fly ash
Subjects: Q Science > QD Chemistry
T Technology > TP Chemical technology
Faculty/Division: Faculty of Chemical & Natural Resources Engineering
Depositing User: Mrs. Sufarini Mohd Sudin
Date Deposited: 31 Dec 2018 04:13
Last Modified: 31 Dec 2018 04:13
URI: http://umpir.ump.edu.my/id/eprint/23521
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item