Investigation of Intake Flow Rate and Swirl Motion of Sl engine

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Shafiq, Suhaimi and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Nik Rosli, Abdullah (2014) Investigation of Intake Flow Rate and Swirl Motion of Sl engine. Applied Mechanics and Materials, 465-46 . pp. 409-417. ISSN 1662-7482

[img]
Preview
PDF
36Kb

Official URL: http://www.scientific.net/AMM.465-466.409

Abstract

In the process of producing an optimized air intake system design, detailed understanding of the airflow motion is required. To reach such understanding, this paper aims to investigate the flow rate and swirl motion of an engines inlet system at different pressures and different conditions. Using a commercial steady flow bench and a swirl meter, the different parameters, the flow rate and swirl coefficient, is obtained at different valve lifts. The inlet system will then be tested in different pressures and at different engine configurations. Since the tested inlet system has two valves in its intake port, both valves are tested separately as well as tested together. It is found that the flow rate pattern mirrors the swirl pattern where the value increases as the valve lift increases but decreases and levels after a certain valve lift. Increase in pressure from 5kPa to 10kPa exhibits a 43% increase in flow rate and 90% increase in swirl coefficient and by removing the manifold, the flow rate only increase by 4% but the swirl coefficient changes by 30%. Theses findings show the main factors that affects the intake process and the results will be used as a baseline to improve the intake system.

Item Type:Article
Uncontrolled Keywords:Airflow, Intake System, Intake Turbulence, Naturally Aspirated Engine
Subjects:T Technology > TJ Mechanical engineering and machinery
ID Code:5373
Deposited By: mira
Deposited On:27 Apr 2015 14:47
Last Modified:30 Jan 2018 15:36

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my