Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Hamada, Khalaf I. and M. M., Rahman and A. Rashid, A. Aziz (2013) Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 0360-3199

[img]
Preview
PDF
45Kb

Official URL: http://dx.doi.org/10.1016/j.ijhydene.2013.07.051

Abstract

This paper presents a parametric study on instantaneous heat transfer of a direct-injection hydrogen-fueled engine using a multidimensional model. A simplified single-step mechanism was considered for estimating the reaction rate of hydrogen oxidation. The modified wall-function was used for resolving the near-wall transport. An arbitrary Lagrangian–Eulerian algorithm was adopted for solving the governing equations. Experimental measurements were implemented to verify the developed model. They show that the instantaneous heat-transfer model is sufficiently accurate. The influence of engine speed, equivalence ratio, and the start of injection timing were investigated. The flow fields appeared to have greater size vectors and coarser distribution with an increase of engine speed. A heterogeneous distribution was obtained for an ultra-lean mixture condition (φ ≤ 0.5), which decreased with an increase of equivalence ratio. There was no pronounced influence of the start of injection on the flow field pattern and mixture homogeneity. Thermal field analysis was used to demonstrate trends in the instantaneous heat transfer. It was observed that there was a crucial distinction between the lean and ultra-lean mixtures as well as the engine speed. Furthermore, a non-uniform behavior was found for the impact of the equivalence ratio on temperature distribution. It is clear that the developed models are powerful tools for estimating the heat transfer of the hydrogen-fueled engine. The developed predictive correlation is highly accurate in predicting the heat transfer of the hydrogen-fueled engine, focusing on the equivalence ratio as a governing variable.

Item Type:Article
Uncontrolled Keywords:Heat transfer correlation; Hydrogen; Direct injection; Injection timing; Equivalence ratio
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Automotive Engineering Centre
Faculty of Mechanical Engineering
ID Code:6290
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:04 Mar 2016 11:26
Last Modified:09 Aug 2017 12:37

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my