Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online)

[img] PDF
Restricted to Repository staff only

4Mb
[img]
Preview
PDF
1392Kb

Official URL: http://dx.doi.org/10.1080/2374068X.2015.1111698

Abstract

In hot stamping process, similar die is used as in cold stamping process but with additional cooling channels. The cooling channel systems are integrated into the die design to control the cooling rate for quenching process of hot blanks. During quenching process, the die is effectively cooled to achieve the optimum cooling rate and homogeneous temperature distribution on hot blanks. In this paper, heuristic method with finite element analysis (FEA) of statis analysis and thermal analysis are applied to determine the cooling channel size, pitch size between channels and channel distance to the blanks surface. This static analysis identifies either the tool able to stand the pressure applied or not, while the thermal analysis is to ensure the die obtains the high cooling efficiency with homogenous temperature distribution. In this heuristic method, each parameter of the cooling channels inside the die are optimized and benchmarked with traditional Taguchi method. The results showed that the heuristic method coincides with Taguchi method even better and achieved the acceptance error between FEA in temperature distributions.

Item Type:Article
Uncontrolled Keywords:Hot stamping process, cooling channel design, design of experiment (DOE), finite element method (FEA)heuristic method and Taguchi method
Subjects:T Technology > TS Manufactures
T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Manufacturing Engineering
Faculty of Mechanical Engineering
ID Code:8566
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:17 Feb 2015 12:26
Last Modified:29 Sep 2016 09:12

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my