Development of single phase PWM inverter for UPS application

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Yaakob, Mohammad Ariff (2007) Development of single phase PWM inverter for UPS application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

[img]
Preview
PDF
8Mb

Official URL: http://iportal.ump.edu.my/lib/item?id=chamo:25581&...

Abstract

This project is to develop an inverter circuit for Uninterruptable Power Supply (UPS) application. Inverters are circuit that convert DC to AC. The function of inverter is to create an AC voltage by using a DC voltage source and in UPS system, the voltage source that used DC voltage commonly batteries. Pulse-width modulation (PWM) technique is use in this project because with PWM, the amplitude of the output voltage can be controlled with the modulating waveforms. In this project, Metal Oxide Field Effect Transistor (MOSFET) is used as switch in the full bridge inverter circuit design. For alternated control purpose, sequential switching is designed for PWM get-way through the MOSFET driver. The function of the driver is to control the ON/OFF of the MOSFET. Driver of the MOSFET is essential in the inverter circuit because the driver use to interface between control circuits (low voltage) and inverter circuit (high voltage). The objective of this project is to develop single phase PWM Inverter for UPS application and to design the circuit, simulate and analyze the switching characteristic of single phase PWM inverter. The simulation of full-bridge single phase inverter for this project has been done by using Unipolar scheme and the output waveform is successfully generated. The switching process in hardware is control by PIC 16F877a and the MOSFET driver is using IR2110. At the end of this project, the results from simulation were compared with hardware.

Item Type:Undergraduates Project Papers
Uncontrolled Keywords:Electric circuits -- Alternating current , Electric circuits -- Direct current
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Faculty/Division:Faculty of Electrical & Electronic Engineering
ID Code:87
Deposited By: Rosfadilla Mohamad Zainun
Deposited On:01 Mar 2010 14:50
Last Modified:03 Mar 2015 14:01

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my