Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660 . pp. 452-456. ISSN 1662-7482

Full text not available from this repository.

Official URL: http://www.scientific.net/AMM.660.452

Abstract

Modelling the compression ignition engine mostly depends on fuel characteristics. The proses involve a model of the real system and carry out experiment as a mean of comparison to understand the behaviour of the system. The diesel engine nowadays operated with different kind of alternative fuels such as natural gas and biofuel. The aim of this article is to study the combustion characteristic occurred in an engine cylinder of a diesel engine when using biofuel. The one-dimensional numerical analysis using GT-Power software is used to simulate the diesel engine. The engine operated at full engine load and difference speed. The methanol fuel used in the simulation is derived from the conventional methanol fuel properties. The analysis of simulations includes the cylinder pressure, combustion temperature and rate of heat release. The simulation result shows that in-cylinder pressure for methanol is slightly higher than diesel fuel in any speed of the engine. It also found that the combustion characteristic on methanol temperature is higher at all crank angle degree of diesel fuel. Mass fraction burns of methanol are much lower than diesel fuel, but burns faster than diesel fuel.

Item Type:Article
Uncontrolled Keywords:Combustion, Methanol, One-Dimensional Simulation
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:9498
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:19 Aug 2015 12:29
Last Modified:30 Jan 2018 08:03

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my