Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11 . pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online)

PDF - Published Version
Available under License Creative Commons Attribution.


Official URL: http://ijame.ump.edu.my/images/Volume_11%20June%20...


This study presents flank wear optimization with minimum quantity lubricant (MQL) for the end milling for the machining of aluminum alloy 6061-T6. Process parameters including the cutting speed, depth of cut, feed rate and MQL flow rate are selected for study to develop an optimization model for flank wear based on the genetic algorithm. The experiments are conducted based on the central composite design method. Three types of tools are used in this experiment, namely, uncoated carbide tools and two coated carbide tools. The study is conducted to perform the experimental investigation of the effects of minimum quantity lubricant (MQL) for the end milling of aluminum alloy 6061-T6, to investigate the relationships of feed rate, axial depth of cut, cutting speed and minimum quantity lubricant flow rate with respect to tool wear for MQL and to perform the optimization of the machining parameters for flank wear. The results of the study show that inserts coated with TiAlN and TiAlN+TiN show higher flank wear on account of the brittleness of the coatings. Uncoated carbide insert shows lower flank wear but the edge integrity is not maintained, so the resultant surface roughness is the worst among the three tools. In order to perform multi-objective optimization, the surface roughness and material removal rate are also measured along with flank wear. Optimization is performed using a genetic algorithm and the optimized designs are obtained in the form of Pareto optimal designs. The best compromised Pareto designs are selected using multi-criteria decision-making.

Item Type:Article
Uncontrolled Keywords:Minimum quantity lubrication; genetic algorithm; multi-objective optimization; aluminum alloy; machining; tool wear.
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:9872
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:30 Nov 2015 16:01
Last Modified:30 Jan 2018 08:27

Repository Staff Only: item control page








An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.

Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my