Items where Author is "Abdalla, Ahmed N."
 | Up a level |
Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanofluids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)
Yao, Liu and Mohd Shah, Nurul Izzah and Mohamad, Fazeeda and Cheng, Jack Kie and An, Hong Ki and Abdalla, Ahmed N. (2022) What makes courier service creative?—From managing logistics to managing knowledge. Sustainability, 14 (21). pp. 1-15. ISSN 2071-1050. (Published)
Abdalla, Ahmed N. and Jing, Wang and Nazir, Muhammad Shahzad and Jiang, Mingxing Xin and Tao, Hao (2022) Socio-economic impacts of solar energy technologies for sustainable green energy: A review. Environment, Development and Sustainability, Ahead of print. pp. 1-38. ISSN 1387-585X. (Published)
Abdulbari, Hayder A. and Jaber, Aqeel S. and Shalash, Nadheer A. and Abdalla, Ahmed N. (2020) Garra Rufa‐inspired optimization technique. International Journal of Intelligent Systems, 35 (-). pp. 1831-1856. ISSN 08848173 (Print); 1098-111X (Online). (Published)
Abdalla, Ahmed N. and R. A., Bakar and Tao, Hai and Ramasamy, D. and K., Kadirgama and Fooj, Benedict and Tarlochan, F. and Sivaraos, S. (2020) Effect of swirl at intake manifold on engine performance using ethanol fuel blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (1). pp. 73-88. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)
Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Rifai, Damhuji and Kharudin, Ali and Al-Douri, Y. (2019) Hybrid GMR/IR probe to reduce the effects of lift-off. Measurement and Control, 52 (5-6). pp. 588-598. ISSN 0020-2940. (Published)
Abdalla, Ahmed N. and Awad, Omar I. and Tao, Hai and Ibrahim, Thamir K. and R., Mamat and Hammid, Ali Thaeer (2019) Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (8). pp. 931-947. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)
Abdalla, Ahmed N. and Tao, Hai and Bagaber, Salem Abdullah and Obed M., Ali and Kamil, Mohammed and Ma, Xiao and Awad, Omar I. (2019) Prediction of emissions and performance of a gasoline engine running with fusel oil–gasoline blends using response surface methodology. Fuel, 253. pp. 1-14. ISSN 0016-2361. (Published)
Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. (2018) Hybrid of Eddy Current Probe Based on Permanent Magnet and GMR Sensor. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 7-11. ISSN 2180-1843. (Published)
Abdalla, Ahmed N. and Faraj, Moneer A. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali and Al-Douri, Y. (2018) Challenges in improving the performance of eddy current testing: Review. Measurement and Control. pp. 1-19. ISSN 0020-2940. (In Press / Online First) (In Press / Online First)
Ali, A. and Ruhaizad, Ishak and Abdalla, Ahmed N. (2018) Determination of Critical Overload Transmission Line Using Novel Maximum Power Line Stability Index. International Journal of Engineering & Technology, 7 (4.28). pp. 155-163. ISSN 2227-524X. (Published)
Ali, A. and Abdalla, Ahmed N. and Ruhaizad, Ishak (2018) EFFECT of DG Optimizing on overload Transmission line Stability. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-11., 225 (03023). ISSN 2261-236X (Published)
Ibrahim, Thamir K. and Marwah Noori, Mohammed and Mohammed, Kamil Mohammed and G., Najafi and Nor Azwadi, Che Sidik and F., Basrawi and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118. pp. 832-846. ISSN 0017-9310. (Published)
Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Khairudin, Ali and Al-Douri, Y. (2018) Investigate the effect of lift-off on eddy current signal for carbon steel plate. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (06005). ISSN 2261-236X (Published)
Hammid, Ali Thaeer and M. H., Sulaiman and Abdalla, Ahmed N. (2018) Prediction of small hydropower plant power production in Himreen Lake dam (HLD) using artificial neural network. Alexandria Engineering Journal, 57 (1). pp. 211-221. ISSN 1110-0168. (Published)
Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin, Ali and Al-Douri, Y. (2018) Response Surface Methodology for Optimizing Giant Magneto-Resistive (GMR)-Bobbing Coil Probe for Carbon Steel Pipeline Crack Detection. International Journal of Engineering & Technology, 7 (3.28). pp. 218-226. ISSN 2227-524X. (Published)
Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Awad, Omar I. and Abdalla, Ahmed N. and F., Basrawi and Marwah Noori, Mohammed and G., Najafi and R., Mamat (2018) A comprehensive review on the exergy analysis of combined cycle power plants. Renewable and Sustainable Energy Reviews, 90. pp. 835-850. ISSN 1364-0321. (Published)
Khudhur, Ahmed M. and Hashim, Yasir and Abdalla, Ahmed N. (2017) Development of Neuron Ion Channel Model using Colored Noise Terms in the Conductance. Research Journal of Applied Sciences, Engineering and Technology, 14 (7). pp. 262-270. ISSN 2040-7459. (Published)
Mohammed, Muamer N. and Nahar, Ali Kerem and Abdalla, Ahmed N. (2017) A Novel Rotating Phase Shift Technique based Peak-to-Average Power Ratio Reduction in OFDM System. In: The 17th International Symposium On Communications And Information Technologies (ISCIT2017) , 25-27 September 2017 , Cairns, Queensland, Australia. pp. 1-10.. (Published)
Moneer, A. Faraj and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin, Ali (2017) Adaptive Neuro-Fuzzy Inference System Model Based on the Width and Depth of the Defect in an Eddy Current Signal. Applied Sciences, 7 (7). pp. 1-12. ISSN 2076-3417. (Published)
Kharudin, Ali and Abdalla, Ahmed N. and Damhuji, Rifai (2017) Multi-Excitation Signal for Depth Crack Defect in Eddy Current Testing. In: The International Conference on Fluids and Chemical Engineering (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah. pp. 1-6.. (Unpublished) (Unpublished)
Faraj, Moneer A. and Abdalla, Ahmed N. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali (2017) Investigate of the Effect of Width Defect on Eddy Current Testing Signals Under Different Materials. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)
Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. (2017) Computational Techniques for Assessing the Reliability and Sustainability of Electrical Power Systems: A Review. Renewable and Sustainable Energy Reviews, 80. pp. 1175-1186. ISSN 1364-0321. (Published)
Damhuji, Rifai and Abdalla, Ahmed N. and Ramdan, Razali and Kharudin, Ali and Faraj, Moneer A. (2017) An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design. Sensors, 17 (3). pp. 1-24. ISSN 1424-8220. (Published)
Khudhur, Ahmed M. and Naif, Yasir Hashim and Abdalla, Ahmed N. (2017) Enhancement into the dissipative stochastic mechanics based neuron model under input current pulses. In: 15th International Conference on Researches in Science and Technology (ICRST) , 23-24 June 2017 , Kuala Lumpur, Malaysia. p. 24.. (Published)
Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud (2017) Nonlinear Dynamic Inverse Controller Based In Field Oriented With SVPWM Current Control. Pertanika Journal of Science & Technology (JST), 25 (S.). pp. 37-44. ISSN 0128-7680. (Published)
Abdulla Fairuzullah, Ahmad Tajuddin and Noraziah, Ahmad and Abdalla, Ahmed N. (2017) Overview Between Clustering and Load Balancing. Advanced Science Letters, 23 (11). pp. 11109-11113. ISSN 1936-6612. (Published)
Gupta, Ritu and Noraziah, Ahmad and Gupta, Arun and Abdalla, Ahmed N. (2017) Overview of Simulation in Wood Plastic Composites Manufacturing. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)
Mohammed, Muamer N. and Nahar, Ali Kareem and Abdalla, Ahmed N. and Hammood, Omar A. (2017) Peak-to-average power ratio reduction based on optimized phase shift technique. In: 17th International Symposium on Communications and Information Technologies , 25-27 September 2017 , Cairns, QLD, Australia. pp. 1-6.. ISBN 978-1-5090-6514-1 (Published)
Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. (2017) Reliability Assessment of Power Generation Systems Using Intelligent Search Based on Disparity Theory. Energies, 10 (3). pp. 1-13. ISSN 1996-1073 . (Published)
Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. and Matsukawa, Yoshiaki (2017) Reliability assessment of generating systems with wind power penetration via BPSO. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1248-1254. ISSN 2088-5334. (Published)
Kharudin, Ali and Abdalla, Ahmed N. and Damhuji, Rifai and Faraj, Moneer A. (2017) A Review on System Development in Eddy Current Testing and Technique for Defect Classification and Characterization. IET Circuits, Devices & Systems, 11 (4). pp. 330-343. ISSN 1751-858X. (Published)
Ibrahim, Thamir K. and F., Basrawi and Awad, Omar I. and Abdalla, Ahmed N. and G., Najafi and R., Mamat and Hagos, F. Y. (2017) Thermal Performance of Gas Turbine Power Plant Based on Exergy Analysis. Applied Thermal Engineering, 115. pp. 977-985. ISSN 1359-4311. (Published)
Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin , Ali (2016) Construct coil probe using GMR sensor for eddy current testing. In: 2nd Symposium on Energy Systems (SES 2016) , 22 September 2016 , Pekan, Universiti Malaysia Pahang. pp. 1-5.. (Published)
Damhuji, Rifai and Abdalla, Ahmed N. and Kharudin, Ali (2016) Defect Signal Analysis For Nondestructive Testing Assesment. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2160-2167. ISSN 1819-6608. (Published)
Damhuji, Rifai and Abdalla, Ahmed N. and Kharuldin, Ali and Ramdan, Razali (2016) Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications. Sensors, 16 (3). pp. 298-328. ISSN 1424-8220. (Published)
Abdalla, Ahmed N. and Keream, Settar S. and Ibrahim, Thamir K. and Tao, Hai (2016) Adaptive Dynamic Inverse Controller for Advanced Coupled Tank Liquid Levels System. In: The 5th International Conference on Computer Science and Computational Mathematics (ICCSCM 2016) , 5-6 May 2016 , Langkawi, Malaysia. pp. 1-6.. (Published)
Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud and Koh, Johnny (2016) Dynamic inverse controller with Matrix Converter Drive Feed Three Phase Induction Motor. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang (UMP). pp. 1-15.. (Unpublished) (Unpublished)
Hammid, Ali Thaeer and Hojabri, Mojgan and M. H., Sulaiman and Abdalla, Ahmed N. and Kadhim, Atheer A. (2016) Load Frequency Control for Hydropower Plants using PID Controller. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8 (10). pp. 47-51. ISSN 2180-1843. (Published)
Ali, A. and Abdalla, Ahmed N. and Ruhaizad, Ishak and Jaber, Aqeel S. (2016) Overloaded Transmission Lines Protection Based On Intelligent Control Protection Scheme. Journal of Engineering and Applied Sciences, 11 (2). pp. 192-198. ISSN 1816-949X. (Published)
Damhuji, Rifai and Abdalla, Ahmed N. and Noraznafulsima, Khamshah and Mohd, Aizat and Mohd, Fadzli (2016) Subsurface Defects Evaluation using Eddy Current Testing. Indian Journal of Science and Technology, 9 (9). pp. 1-7. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)
Keream, Settar S. and Abdalla, Ahmed N. and Frayyeh, Hatem Fahad and Mohd Razali, Daud (2016) Three Phase Induction Motor Torque Ripple Minimization Based On a Novel Nonlinear Dynamic Inverse Controller. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 321-329.. (Published)
Jaber, Ali Y. and L. A., Latiff and Norulhusna, Ahmad and Abdalla, Ahmed N. (2015) Joint Clipping and Amplifying Techniques for PAPR Reduction in OFDM Systems. In: 1st International Conference on Telematics and Future Generation Networks (TAFGEN) , 26-28 May 2015 , Kuala Lumpur. pp. 54-58.. ISBN 978-1-4799-7315-6 (Published)
Hussain K., Khaleaf and Kamarul Hawari, Ghazali and Mithaq Na'ma, Raheema and Abdalla, Ahmed N. (2015) A New Approach in a Gray-Level Image Contrast Enhancement by using Fuzzy Logic Technique. International Journal of Scientific Research in Science, Engineering and Technology, 1 (1). pp. 19-23. ISSN 2395-1990. (Published)
Khudhur, Ahmed Mahmood and Abdalla, Ahmed N. (2015) A New Neuron Ion Channel Model with Noisy Input Current. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)
Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud and Ruzlaini, Ghoni and Al Mashhadany, Youssif (2015) Power Factor Control of Matrix Converter Based Induction Motor Drive. Modern Applied Science, 9 (8). pp. 112-120. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)
Noraziah, Ahmad and Sultan, Elrasheed Ismail and Faisal, Alamri and Abdalla, Ahmed N. (2014) Optimized Load Balancing based Task Scheduling in Cloud Environment. International Journal of Computer Applications in Technology, 1 (1). pp. 35-42. ISSN 0952-8091 (print); 1741-5047 (online). (Published)
Keream, Settar S. and Abdalla, Ahmed N. and Ruzlaini, Ghoni and Mohd Razali, Daud and Mashhadany, Youssif Al (2014) Robust Dynamic Inverse Controller for Spacecraft Model. International Journal Of Scientific Research, 3 (5). pp. 113-117. ISSN 2277 - 8179. (Published)
Ruhaizad, Ishak and Azah, Mohamed and Abdalla, Ahmed N. and Mohd Zamri, Che Wanik (2014) Optimal Placement and Sizing of Distributed Generators Based on a Novel MPSI Index. International Journal of Electrical Power & Energy Systems, 60. pp. 389-398. ISSN 0142-0615. (Published)
Ruhaizad, Ishak and Azah, Mohamed and Abdalla, Ahmed N. and Mohd Zamri, Che Wanik (2014) Optimal DG Placement and Sizing for Voltage Stability Improvement Using Backtracking Search Algorithm. In: Proceedings of the International Conference on Artificial Intelligence, Energy and Manufacturing Engineering (ICAEME 2014) , 9-10 June 2014 , Kuala Lumpur. pp. 29-34.. (Published)
Noraziah, Ahmad and Mohd Azhar, Mohd Amer and Abdalla, Ahmed N. and Ainul Azila, Che Fauzi (2014) Prediction of Vehicle Fuel Consumption Model Based on Artificial Neural Network. Applied Mechanics and Materials, 492. pp. 3-6. ISSN 1662-7482. (Published)
Jasni, Mohamad Zain and Tao, Hai and Chongmin, Li and Abdalla, Ahmed N. (2014) Robust Image Watermarking Theories and Techniques: A Review. Journal of Applied Research and Technology, 12 (1). pp. 122-138. ISSN 665-6423. (Published)
M. M., Yusoff and Mehdi, Qasim and Al-Dabbagh, Jinan B. and Abdalla, Ahmed N. and Hegde, Gurumurthy (2013) Radial Basis Function Neural Network Model for Optimizing Thermal Annealing Process Operating Condition. Nano Hybrids , 4. pp. 21-31. ISSN 2234-9871. (Published)
Fakhreldin, Mohammed Adam Ibrahim and Jasni, Mohamad Zain and Abdalla, Ahmed N. and Mohamad Fadli, Zolkipli and Ramdan, Razali (2013) Cloud Computing Model for MyGRANTs Project. In: The 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013) , 20-22 August 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 121. ISSN 03062619 (Unpublished) (Unpublished)
Ramdan, Razali and Mortaza, Mohamed and Abdalla, Ahmed N. and Muhammad, Rauf (2013) Design And Develop Automatic Battery Cyclic Tester. In: Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE) , Konya. pp. 61-65.. (Published)
Liu, Yao and Abdalla, Ahmed N. (2013) Evaluating the Managerial Behavior of Managing Knowledge in Chinese SMEs. Information Technology and Management, 14 (2). pp. 159-165. ISSN 1385-951X(Print); 1573-7667(Online). (Published)
Khleaf, Hussain Kareem and Kamarul Hawari, Ghazali and Abdalla, Ahmed N. (2013) Features Extraction Technique for ECG Recording Paper. In: Proceedings of International Conference on Artificial Intelligence in Computer Science and ICT (AICS 2013) , 25 - 26 November 2013 , Bayview Hotel, Langkawi, Malaysia. pp. 1-6.. (Published)
Beg, Abul Hashem and Noraziah, Ahmad and Abdalla, Ahmed N. and Rabbi, Khandakar Fazley (2013) Framework of Persistence Layer Synchronous Replication to Improve Data Availability into a Heterogeneous System. International Journal of Computer Theory and Engineering, 5 (4). pp. 611-615. ISSN 1793-8201 . (Published)
S. Jaber, Aqeel and Abu Zaharin, Ahmad and Abdalla, Ahmed N. (2013) An Investigation of Scaled-FLC Using PSO for Multi-area Power System Load Frequency Control. Energy and Power Engineering, 5 (4). pp. 458-462. ISSN 1949-243X (print); 1947-3818 (online). (Published)
Noraziah, Ahmad and Abdalla, Ahmed N. and Beg, Abul Hashem (2013) Managing Heterogeneous Database Replication Using Persistence Layer Synchronous Replication (PLSR). Wulfenia Journal, 20 (2). pp. 221-239. ISSN 1561-882X. (Published)
Rashag, Hassan Farhan and Koh, S. P. and Abdalla, Ahmed N. and Nadia M. L., Tan and Chong, K. H. (2013) Modified Direct torque control using algorithm control of stator flux estimation and space vector modulation based on fuzzy logic control for achieving high performance from induction motors. Journal of Power Electronics, 13 (3). pp. 369-380. ISSN 1598-2092. (Published)
Abdalla, Ahmed N. and Mortaza, Mohamed and Ramdan, Razali and Muhammad, Rauf (2013) Response Surface Method In-Cooperating Embedded System For Bus Route Optimization. In: International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE) , 9-11 May 2013 , Konya. pp. 66-71.. (Published)
Mohammed H., Ali and Chakrabarty, C. K. and Abdalla, Ahmed N. and Hock, Goh C. (2013) An optimized 2.4GHz RF power amplifier performance for WLAN system. In: 26th IAHR Symposium on Hydraulic Machinery and Systems , 19-23 August 2012 , Beijing, China. pp. 1-4., 16 (1). ISSN 1755-1307 (Published)
Mr, Handrizal and Mr, Muhammad Zarlis and Noraziah, Ahmad and Abdalla, Ahmed N. (2012) An Improved of Channel Allocation for WLAN Using Vertex Merge Algorithm. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 205-213.. (Published)
Wang, Jing and Muhammad Nubli, Abdul Wahab and Abdalla, Ahmed N. and Gu, Ming and Liu, Yao and Hanisah, Mohd Noor (2012) The Influence of Relaxation with Electromyography and Islamic Prayer Programs for Female Muslim. International Journal of the Physical Sciences, 7 (22). pp. 2897-2904. ISSN 1992-1950. (Published)
Nidzamuddeen, Ishak and Abdalla, Ahmed N. and Noraziah, Ahmad (2012) Sustainable Energy Efficiency Implementation in Building. In: International Conference On Green Technology & Ecosystems for Global Sustainable Development 2012(ICGTEC 2012) , 28-30 May 2012 , University of Tuzla, Tuzla, Bosnia & Herzegovina. . (Published)
Ramdan, Razali and Abdalla, Ahmed N. and Ruzlaini, Ghoni and Venkataseshaiah, C. (2012) Improving Squirrel Cage Induction Motor Efficiency: Technical Review. International Journal of Physical Sciences , 7 (8). pp. 1129-1140. ISSN 1992-1950. (Published)
Rashag, Hassan Farhan and S. P., Koh and Abdalla, Ahmed N. and Nadia M. L., Tan and K. H., Chong and S. K., Tiong (2012) DTC Torque Ripple Minimization Based on PSO-PID Controller. Scientific Research and Essays, 7 (15). pp. 1564-1572. ISSN 1992-2248. (Published)
Fadhilah, Ahmad and Noraziah, Ahmad and Suhailan, Safei and Azrul Amri, Bharun Abidin and Abdalla, Ahmed N. and Aznida Hayati, Zakaria Mohamad (2012) Developmental issues of web-based decision support system. Journal of Applied Sciences, 12 (19). pp. 2059-2064. ISSN 1812-5654. (Published)
Noriyani, Mohd Zin and Noraziah, Ahmad and Abdalla, Ahmed N. and Ainul Azila, Che Fauzi (2012) Solving Two Deadlock Cycles through Neighbor Replication on Grid Deadlock Detection Model. Journal of Computer Science, 8 (2). pp. 265-271. ISSN 1549-3636. (Published)
Jasni, Mohamad Zain and Tao, Hai and Ahmed, M. Masroor and Abdalla, Ahmed N. and Jing, Wang (2012) A Wavelet-Based Particle Swarm Optimization Algorithm for Digital Image Watermarking. Integrated Computer-Aided Engineering, 19 (1). pp. 81-91. ISSN 1069-2509 (print); 1875-8835 (online). (Published)
Noraziah, Ahmad and Noriyani, Mohd Zin and Abdalla, Ahmed N. and Norazaliza, Mohd Jamil (2011) Minimize Network Congestions in Single-Row Networks. Scientific Research and Essays, 6 (11). pp. 2372-2378. ISSN 1992-2248. (Published)
Aryza, Solly and Abdalla, Ahmed N. and Zulkeflee, Khalidin and Zulkarnain, Lubis (2011) Adaptive speed estimation of induction motor based on neural network inverse control. Procedia Engineering, 15. pp. 4188-4193. ISSN 1877-7058. (Published)
Nidzamuddeen, Ishak and Abdalla, Ahmed N. and Noraziah, Ahmad and Tan, Chien Sion and Tao, Hai (2011) Design of smart energy level controller for UMP buildings. In: 1st International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 243-246.. ISBN 978-161284228-8 (Published)
Tao, Hai and Jasni, Mohamad Zain and Abdalla, Ahmed N. and Mohammad Masroor, Ahmed (2011) Hybrid particle swarm optimization for robust digital image watermarking. International Journal of Physical Sciences, 6 (31). pp. 7222-7232. ISSN 1992-1950. (Published)
S. M., Nawi and Abdalla, Ahmed N. and Mohd Syakirin, Ramli (2011) Improved coupled tank liquid levels system based on hybrid genetic-immune adaptive tuning of PI controller. In: 1st International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 247-252.. ISBN 978-1-61284-229-5 (Published)
Ibrahim, Thamir K. and M. M., Rahman and Abdalla, Ahmed N. (2011) Optimum gas turbine configuration for improving the performance of combined cycle power plant. Procedia Engineering, 15. pp. 4216-4223. ISSN 1877-7058. (Published)
Haidar, Ahmed M. A. and Ramdan, Razali and Abdalla, Ahmed N. and Hazizulden, Abdul Aziz and Noman, Khaled M. G. and Al-Jawfi, Rashad A. (2011) Protection of solar electric car DC motor with PIC controller. In: International Conference on Electric and Electronics (EEIC 2011) , 20-22 June 2011 , Nanchang, China. pp. 149-161., 98. ISSN 18761100 ISBN 978-364221764-7 (Published)
Abdalla, Ahmed N. and Ruzlaini, Ghoni and N. F., Zakaria (2011) Simulation model of space vector modulated control matrix converter-fed induction motor. Journal of Applied Sciences, 11 (5). pp. 768-777. ISSN 1812-5654. (Published)
Noraziah, Ahmad and Siang, Lim Cheh and Abdalla, Ahmed N. and Herawan, Tutut and Tze, Wong Ying and Mohd Helmy, Abd Wahab (2011) Sophisticated educational software for dentistry students using dental measurement system (DEMS). Procedia - Social and Behavioral Sciences, 28. pp. 133-138. ISSN 1877-0428, ESSN: 1877-0428. (Published)
Mohamad Azlan, Hussin and Abdalla, Ahmed N. and Ruhaizad, Ishak and Rosmadi, Abdullah and Zailini, Mohd Ali (2011) Study on improving electric vehicle drive range using solar energy. In: 1st International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 373-376.. ISBN 978-1-61284-229-5 (Published)
Beg, A. H. and Noraziah, Abu Yazid and Abdalla, Ahmed N. (2011) A novel design and development of persistence layer for heterogeneous synchronous replication in data grid. Scientific Research and Essays, 6 (28). pp. 5966-5975. ISSN 1992-2248. (Published)
Thamir K., Ibrahim and M. M., Rahman and Abdalla, Ahmed N. (2010) Study on The Effective Parameter of Gas Turbine Model with Intercooled Compression Process. Scientific Research and Essay , 5 (23). pp. 3760-3770. ISSN 1992-2248. (Published)
N. A., Handrizal and Noraziah, Ahmad and Abdalla, Ahmed N. (2009) Spread Spectrum Process Using Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS). In: The Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 18-27.. (Published)
Selvakumar, Raja Saravana Kumar and Nik Mohd Kamil, Nik Yusof and Abdalla, Ahmed N. (2009) A New Development of Multi-application of Micro-controller Through Educational Training Systems. In: Malaysian Technical Universities Conference on Engineering and Technology 2009 (MUCET 2009) , 20 June 2009 , Kuantan, Pahang. pp. 508-511.. (Published)
Muhammad, Rauf and Abdalla, Ahmed N. and Nik M., Kamal and Azher, Fakharuddin (2009) Design of Intelligent Gps Navigation System for Bus Monitoring and Station Reporting. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1-7.. (Published)
Fakharuddin, Azhar and Nik Mohd Kamil, Nik Yusof and Muhammad, Rauf and Abdalla, Ahmed N. (2009) New Energy Management System Based on Intelligent Digital Power Monitoring. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)
Noraznafulsima, Khamshah and Abdalla, Ahmed N. and Badaruddin, Muhammad (2009) Temperature Compensation of a Thermal Flow Sensor by Using Temperature Compensation Network. In: The Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 10-17.. (Published)