Items where Author is "Azmir, Azhari"

Qutaba, Syed and Azmir, Azhari and Mebrahitom, Asmelash (2024) Effect Of Surface Topography Of 8090 Al-Li Alloy During Abrasive Waterjet Peening Process. In: AIP Conference Proceedings. 5th International Conference on Automotive Innovation & Green Energy Vehicle (AiGEV2022) , 5 – 6 December 2022 , Langkawi, Kedah. pp. 1-7., 2998 (060005). ISBN 978-0-7354-4793-6 (Published)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Azmir, Azhari (2024) Investigation on optimum waterjet cleaning parameters for minimum surface impact during paint removal from mild steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (2). pp. 11-28. ISSN 2289-7879. (Published)

Qutaba, Syed and Asmelash, Mebrahitom and Azmir, Azhari (2023) Investigation on the multiple plies structure of aluminum-lithium alloy and glass fiber composite with respect to deformation failure. Materials Research Express, 10 (016507). pp. 1-17. ISSN 2053-1591. (Published)

Nur Aziera, Nur Aziera and Mebrahitom, A. and Azmir, Azhari and Saptaji, Kushendarsyah (2023) Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 657-663.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

Nazrin, Mokhtar and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2023) Surface Roughness Analysis on Sheet Metals During AWJ Machining Using Low Pressure. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 59-64.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

Syed, Qutaba and Azmir, Azhari and Gebremariam, Mebrahitom Asmelash and Yadav, Aman and Lusi, Nuraini (2022) Development of fiber metal laminate composite with different glass fiber gsm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. ISSN 2214-7853 (In Press / Online First) (In Press / Online First)

Tariq, Syed Qutoba and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2022) A review on peening processes and its effect on surfaces. The International Journal of Advanced Manufacturing Technology. pp. 4233-4270. ISSN 0268-3768 (Printed), 1433-3015 (online). (Published)

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Nur Khadijah, Mazlan and Nazrin, Mokhtar and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Nur Khadijah, Mazlan and Nazrin, Mokhtar and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Alao, Abdur-Rasheed and Azmir, Azhari (2021) Investigation of indentation size effect and R-curve behaviour of Li2O–SiO2 and Li2O–2SiO2 glass ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 124 (104842). pp. 1-13. ISSN 1751-6161. (Published)

Nurul Najihaha, . and Gebremariam, M. A. and Azmir, Azhari and Mulubrhan, Freselam (2021) Simulation modeling of a manufacturing process using Tecnomatix plant simulation software. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 56-62. ISSN 2636-9575. (Published)

Efendee, A. M. and Azmir, Azhari and Hasnain, A. R. and Zainal Ariffin, S. and Mukhtar, M. (2021) Investigation of magnetic field effect on MRR, EWR and surface roughness during EDM of AISI420 tool Steel. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-11., 1068 (1). ISSN 1757-899X (Published)

Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853 (Published)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2021) Optimisation of paint removal operation using waterjet cleaning process. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. Lecture Notes in Mechanical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 485-494., 46. ISBN 978-981-15-9505-9 (Published)

Nur Amalina, Sabuan and Mebrahitom, A. and Azmir, Azhari and Mulubrhan, Freselam and Alemu, Tamiru (2020) Investigation on the electrical conductivity of Al2O3-Ti ceramic composites using a pressureless sintering process. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (Published)

Suraidah, S. and Muhamad Ridzuwan, . and Gebremariam, M. A. and Azmir, Azhari and Kassa, Freselam Mulubrhan (2020) End milling finite element method for cutting force prediction and material removal analysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8., 788 (012020). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0 (Published)

Fatin Hakimah, Sharifuddin and Kassa, Freselam Mulubrhan and Gebremariam, M. A. and Azmir, Azhari and Alemu, Tamiru (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC) , 13 - 14 December 2019 , Melaka. pp. 76-79. (9067991). ISBN 978-172811826-0 (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853 (Published)

Saptaji, Kushendarsyah and Mebrahitom, A. and Azmir, Azhari (2018) Machining of biocompatible materials: a review. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2255-2292. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981 (Published)

A. M., Efendee and M., Saifuldin and Gebremariam, M.A. and Azmir, Azhari (2018) Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981 (Published)

Mebrahitom, A. and Nur Amalina, Sabuan and Azmir, Azhari and Zamzuri, Hamedon and Tamiru Alemu, Lemma (2018) Microstructural and process characterization on the electrical conductivity and electrical discharge machinability of Al2O3-based ceramic composites. In: Advanced Energy Materials (AEM2018) Conference , 10 - 12 September 2018 , University of Surrey, England. p. 1.. (Unpublished) (Unpublished)

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Zamzuri, Hamedon and Shea, Cheng Kuang and Hasnulhadi, Jaafar and Azmir, Azhari (2018) Optimization of surface roughness and wall thickness in dieless incremental forming of aluminum sheet using taguchi. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 17578981 (Published)

M., Murugan and Mebrahitom, A. and Azmir, Azhari and Zamzuri, Hamedon (2018) Performance analysis of abrasive waterjet machining process at low pressure. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981 (Published)

Zamzuri, Hamedon and Azmir, Azhari and A. R., Yusoff (2018) In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System. Journal of Advanced Manufacturing Technology, 12 (1). pp. 513-524. ISSN 2289-8107. (Published)

Nur Amalina, Sabuan and Nurfatini, Zolkafli and Mebrahitom, A. and Azmir, Azhari and Othman, Mamat (2018) The development of Zirconia and Copper toughened Alumina ceramic insert. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-8., 342 (012106). ISSN 1757-899X (Published)

Naqib Hakim, Kamarudin and Mebrahitom, A. and Azmir, Azhari (2017) Assembly meshing of abrasive waterjet nozzle erosion simulation. In: IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017) , 8-9 August 2017 , Kuala Lumpur, Malaysia. pp. 1-8., 290 (012069). ISSN 1757-899X (Published)

Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished) (Unpublished)

Mebrahitom, A. and Seow , Xiang and Azmir, Azhari and Tamiru, A. (2017) Remaining Tool Life Prediction Based On Force Sensors Signals During End Milling Of Stavax ESR Tool Steel. In: International Mechanical Engineering Congress and Exposition (IMECE) , 3-9 November 2017 , Swiss Garden Hotel, Balok, Kuantan, Pahang. pp. 1-7.. ISBN 9780791858356 (Published)

Azmir, Azhari and Zamzuri, Hamedon and Mebrahitom, A. (2017) A study on Wire Breakage in Electrical Discharge Machining of Polyurethane Foam. In: Materials Today: Proceedings, 6th International Conference of Materials Processing and Characterization (ICMPC 2016) , 5-7 December 2016 , Hyderabad, India. pp. 5222-5227., 4 (4). ISSN 2214-7853 (Published)

Mebrahitom, A. and Rizuan, D. and Azmir, Azhari and M., Nassif (2016) Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 757-8981 (print); 1757-899X (online) (Published)

Naqib Hakim, Kamarudin and A. K., Prasada Rao and Azmir, Azhari (2016) CFD based erosion modelling of abrasive waterjet nozzle using discrete phase method. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (012016). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Azmir, Azhari and S., Sulaiman and A. K., Prasada Rao (2016) A Review on the Application of Peening Processes for Surface Treatment. IOP Conference Series: Materials Science and Engineering, 114 (012002). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

A. S. A., Sani and F. J. P., Sousa and Zamzuri, Hamedon and Azmir, Azhari (2016) Contact Pressure Distribution During the Polishing Process of Ceramic Tiles: A Laboratory Investigation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-19., 114 (012008). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2016) Effect of Multiple Passes Treatment in Waterjet Peening on Fatigue Performance. Applied Surface Science. pp. 1-7. ISSN 0169-4332. (Published)

Zamzuri, Hamedon and Razemi, M. N. I. and Azmir, Azhari and A. R., Yusoff (2016) In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System. In: 5th International Conference On Design And Concurrent Engineering (IDECON 2016) , 18-21 September 2016 , Langkawi, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)

Marini, C. D. and Fatchurrohman, Nanang and Azmir, Azhari and Suraya, Sulaiman (2016) Product Development using QFD, MCDM and the Combination of these Two Methods. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Syazwani, H. and Mebrahitom, A. and Azmir, Azhari (2016) A Review on Nozzle Wear in Abrasive Water Jet Machining Application. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114. ISSN 1757-899X (Published)

Das, S. and Ain, W. Q. and Azmir, Azhari and A. K., Prasada Rao (2016) Temperature Gradient Field Theory of Nucleation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2015) Effect of Multiple Jet Passes Treatment in Waterjet Peening on Fatigue Performance. In: 1st International Conference on Applied Surface Science (ICASS 2015) , 27-30 July 2015 , Shanghai, China. pp. 1-20.. (Unpublished) (Unpublished)

Azmir, Azhari and Schindler, Christian and Hilbert, K. and Godardb, C. and Kerscher, Eberhard (2014) Influence of Waterjet Peening and Smoothing on the Material Surface and Properties of Stainless Steel 304. Surface and Coatings Technology, 258 (Nov.). pp. 1176-1182. ISSN 0257-8972. (Published)

Mebrahitom, A. and Azmir, Azhari (2014) Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM. Advanced Materials Research, 1133. pp. 339-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Azmir, Azhari and Schindler, Christian and Nkoumbou, Jhislain and Kerscher, Eberhard (2014) Surface Erosion of Carbon Steel 1045 During Waterjet Peening. Journal of Materials Engineering and Performance, 23 (5). pp. 1870-1880. ISSN 1059-9495. (Published)

Mohamed Reza Zalani, Mohamed Suffian and M. A., Hamdi and Azmir, Azhari (2010) Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . ISBN 978-967-5080-9501 (Published)

Azmir, Azhari and A. A., Aziz and M. M., Noor (2007) Optimization Of Abrasive Waterjet Machining Process Parameters Using Orthoganalarray With Grey Relational Analysis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. pp. 21-30.. (Published)