Items where Author is "Cionita, Tezara"

Article

Deni Fajar Fitriyana, . and Rifky, Ismail and Bayuseno, Athanasius Priharyoto and Siregar, Januar Parlaungan and Cionita, Tezara (2024) Characterization of hydroxyapatite extracted from crab shell using the hydrothermal method with varying holding times. Journal of Renewable Materials, 12 (6). pp. 1145-1163. ISSN 2164-6325. (Published)

Teuku Rihayat, . and Nurhanifa, . and Isra Adelya, Izzati and Sabila Yasara, Sa and Adi Saputra, Ismy and Sariadi, . and Muhammad Yunus, . and Irwan, . and Harunsyah, . and Alfian, Putra and Siregar, Januar Parlaungan and Cionita, Tezara (2024) Investigation of polyurethane primer coating paint based on local palm oil with antimicrobial and anticorrotion agent formula bentonite-chitosan. Chelo Journal of Technology for Community Service (CETICS), 1 (2). pp. 75-87. ISSN 3026-3336. (Published)

Dewi, Rozanna and Sylvia, Novi and Zulnazri, , and Riza, Medyan and Siregar, Januar Parlaungan and Cionita, Tezara and Kusuma, Budhi Santri (2024) Characterization of sago starch-based degradable plastic with agricultural waste cellulose fiber as filler. AIMS Environmental Science, 11 (2). pp. 304-323. ISSN 2372-0352. (Published)

Wan Zateel Aqmaer, Wan Ab Halim and Ramli, Junid and Norazlianie, Sazali and Siregar, Januar Parlaungan and Jeefferie, Abd Razak and Deni Fajar Fitriyana, . and Cionita, Tezara and Jamiluddin, Jaafar (2024) Enhancement of flexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80. Journal of Engineering and Applied Sciences, 71 (69). pp. 1-14. ISSN 1816-949X. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Jamiluddin, Jaafar and Taqriban, Rilo Berdin and Jehadus, Emilianus and Manalu, Janviter (2024) Influence of Post-Heat Treatment on the Characteristics of FeCrBMnSi Coating on Stainless Steel 304 Substrate Prepared by Twin Wire Arc Spray (TWAS) Method at Various Stand-off Distance. Jordan Journal of Mechanical and Industrial Engineering, 18 (2). pp. 1-11. ISSN 1995-6665. (Published)

Cionita, Tezara and Mohammad Hazim, Mohamad Hamdan and Siregar, Januar Parlaungan and Fitriyana, Deni Fajar and Ramli, Junid and Wong, Lingshing and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Jehadus, Emilianus (2024) Overview of jute fibre as thermoplastic matrix polymer reinforcement. Journal of Renewable Materials, 12 (3). pp. 457-483. ISSN 2164-6325. (Published)

Cionita, Tezara and Jamiluddin, Jaafar and Wong, Ling-Shing and Siregar, Januar Parlaungan and Al Emran, Ismail and Mohamad Farid, Sies and Irawan, Agustinus Purna and Hadi, Agung Efriyo and Fitriyana, Deni Fajar and Teuku Rihayat, . (2024) A brief review on the utilization of biopolymers in the manufacturing of natural fiber composites. Journal of Engineering Science and Technology, 19 (1). 52 -66. ISSN 1823-4690. (Published)

Rahmad Doni, Widodo and Rusiyanto, . and Wahyudi, . and Melisa Kartika Sari, . and Deni Fajar Fitriyana, . and Siregar, Januar Parlaungan and Cionita, Tezara and Da Silva Guterres, Natalino Fonseca and Da Silva, Mateus De Sousa and Jamiluddin, Jaafar (2023) Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications. AIMS Materials Science, 10 (6). pp. 1105-1120. ISSN 2372-0484. (Published)

Luqman Hakim, Alias and Jamiluddin, Jaafar and Siregar, Januar Parlaungan and Cionita, Tezara and Mohd Bijarimi, Mat Piah and Agustinus Purna, Irawan and Hamidon, Salleh and Oumer, Ahmed Nurye (2023) Influence of dammar gum application on the mechanical properties of pineapple leaf fiber reinforced tapioca biopolymer composites. Polymer Composites, 45 (3). 2858 -2868. ISSN 1548-0569. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk, Al2O3, and Fe2O3 on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Widodo, Rahmat Doni and Rusiyanto, R. and Athoillah, A. and Setiadi, Rizki and Bahatmaka, Aldias and Darsono, Febri Budi and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Ismail, Rifky and Bayuseno, Athanasius P. and Irawan, Agustinus Purna and Guterres, N. F.D.S. (2023) Investigating the effect of molasses concentrations on the characterization of evaporation boat waste for crucible materials candidate. ARPN Journal of Engineering and Applied Sciences, 18 (12). pp. 1354-1364. ISSN 1819-6608. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) biocomposites prepared via cold isostatic pressing. Polymers, 15 (559). pp. 1-17. ISSN 2073-4360. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Inn, Lai Qit and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Numerical Analysis of Battery Thermal Management System of Electric Vehicle. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 106-114. ISSN 2735-0142. (Published)

Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi and Fitriyana, Deni Fajar and Widodo, Rahmat Doni and Ismail, Rifky and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Nur Hidayah, Ismail (2023) A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3. Automotive Experiences, 6 (2). pp. 303-319. ISSN 2615-6202. (Published)

Fitriyana, Deni Fajar and Irawan, Agustinus Purna and Bahatmaka, Aldias and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Muhamadin, Rilo Chandra and Cionita, Tezara and Siregar, Januar Parlaungan and Jehadus, Emilianus and Baskara, Gregorius Dimas and Laksmidewi, Dwinita and da Silva Guterres, Natalino Fonseca (2023) The effect of temperature on the hydrothermal synthesis of carbonated apatite from calcium carbonate obtained from green mussels shells. ARPN Journal of Engineering and Applied Sciences, 18 (11). pp. 1215-1224. ISSN 1819-6608. (Published)

Ismail, Rifky and Cionita, Tezara and Lai, Yinling and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Bayuseno, Athanasius Priharyoto and Nugraha, Fariz Wisda and Muhamadin, Rilo Chandra and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) Characterization of PLA/PCL/green mussel shells Hydroxyapatite (HA) biocomposites prepared by chemical blending methods. Materials, 15 (8641). pp. 1-17. ISSN 1996-1944. (Published)

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2022) Investigating the effect of pcl concentrations on the characterization of pla polymeric blends for biomaterial applications. Materials, 15 (7396). pp. 1-13. ISSN 1996-1944. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Nugroho, Sri and Fitriyana, Deni Fajar and Ismail, Rifky and Nurcholis, Thesar Aditya and Cionita, Tezara and Siregar, Januar Parlaungan (2022) The effect of surface hardening on the HQ 705 steel camshaft using static induction hardening and tempering method. Automotive Experiences, 5 (3). pp. 343-354. ISSN 2615-6202. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Fitriyana, Deni Fajar and Doni Widodo, Rahmat and Kriswanto, Kriswanto and Athoillah, Ahmad and Prasetyo, Ares Yudi and Alrasyid, Mochamad Dzaki and Aripin, Muhammad Bustanul and Dimyati, Saeful and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Ismail, Rifky and Bayuseno, Athanasius Priharyoto (2022) Addition Rice Husk on the Density and Impact Strength of Non-Asbestos Brake Pad Composites Prepared by The Hand Layup Method. Jurnal Penerapan Teknologi dan Pembelajaran, 20 (1). pp. 20-28. ISSN 2527-6964. (Published)

Teuku, Rihayat and Agung Efriyo, Hadi and Nurhanifa, Aidy and Aida, Safitri and Siregar, J. P. and Cionita, Tezara and Agustinus Purna, Irawan and Mohammad Hazim, Mohamad Hamdan and Deni Fajar, Fitriyana (2021) Biodegradation of polylactic acid-based bio composites reinforced with chitosan and essential oils as anti-microbial material for food packaging. Polymers, 13 (22). pp. 1-24. ISSN 2073-4360. (Published)

Agung, E. H. and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Bachtiar, Dandi and Cionita, Tezara and Jamiluddin, Jaafar (2018) Water Absorption Behaviour and Mechanical Performance of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Mohd Bijarimi, Mat Piah and Cionita, Tezara and Sharmiza, Adnan and Teuku, Rihayat (2018) Influence of selected treatment on tensile properties of short pineapple leaf fiber reinforced tapioca resin biopolymer composites. Journal of Polymers and the Environment, 26 (11). pp. 4271-4281. ISSN 1566-2543 (Print); 1572-8919 (Online). (Published)

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Siregar, J. P. and Cionita, Tezara and Bachtiar, Dandi and M. R. M., Rejab (2015) Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482. (Published)

Siregar, J. P. and Cionita, Tezara and Nor Mariah, Adam and Juliana, Jalaludin and Mariani, Mansor (2014) Measurement of Indoor Air Quality Parameters in Daycare Centres in Kuala Lumpur Malaysia. Applied Mechanics and Materials, 564. pp. 245-249. ISSN 1662-7482. (Published)

Book Chapter

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Cionita, Tezara (2019) Mechanical properties of mengkuang leave fibre reinforced low density polyethylene composites. In: Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites: Development, Characterization and Applications. Woodhead Publishing Series, 6 (2018). Woodhead Publishing Series, Sawston‎, ‎Cambridge, pp. 181-196. (Unpublished)

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Cionita, Tezara (2017) The Mechanical Properties of Alkaline Treated Pineapple Leaf Fibre to Reinforce Tapioca based Bioplastic Resin Composite. In: Manufacturing Sciences and Technologies VII. Trans Tech Publications Ltd, pp. 66-70. ISBN 9783038357322

Conference or Workshop Item

Cionita, Tezara and Siregar, Januar Parlaungan and Mohammad Hazim, Mohamad Hamdan and Rihayat, Teuku and Bachtiar, Dandi and Fitriyana, Deni Fajar and Prayitno, P. (2021) Influence of layering sequences on tensile properties of hybrid woven Jute/Ramie fibre reinforced polyester composites. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1836-1841., 48. ISSN 2214-7853 (Published)

Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012042). ISSN 1757-8981 (Published)

Safitri, Nelly and Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Jazuli, Muhammad and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Efficiency of photovoltaic technology for Citronella oil distillation. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012079). ISSN 1757-8981 (Published)

Rihayat, Teuku and Suryani, Suryani and Hasanah, Uswatun and Nurhanifa, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012028). ISSN 1757-8981 (Published)

Rihayat, Teuku and Suryani, Salim and Fitriyani, C. N. and Aidy, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Synthesis and characterization of PLA-Chitosan-ZnO composite for packaging biofilms. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-9., 788 (012045). ISSN 1757-8981 (Published)

Siregar, J. P. and M. R. M., Rejab and Jamiluddin, Jaafar and Zalinawati, Muhamad and Cionita, Tezara and Mawarnie, Ismail and M.H.M., Hamdan (2020) Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 1729-1734., 46. ISSN 2214-7853 (Published)

M. H. M., Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Mahendran, Samykano and E. H., Agung and Cionita, Tezara and Jamiluddin, Jaafar (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (1). ISSN 1757-8981 (Published)