Items where Author is "Mohd Adnin, Hamidi"

Article

Wan Muhammad Noor Sarbani, Mat Daud and Mohd Adnin, Hamidi and Rizalman, Mamat and Daing Mohamad Nafiz, Daing Idris (2023) A prediction of graphene nanoplatelets addition effects on diesel engine emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10758-10766. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhamad Norkhizan, Abdullah and Ahmad Fitri, Yusop and Rizalman, Mamat and Mohd Adnin, Hamidi and Sudhakar, Kumarasamy and Yusaf, Talal (2023) Sustainable biofuels from first three alcohol families : A critical review. Energies, 16 (648). pp. 1-21. ISSN 1996-1073. (Published)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) A Review of fuel additives' effects and predictions on internal combustion engine performance and emissions. AIMS Energy. (In Press / Online First) (In Press / Online First)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on The Effect of Alcohol Usage as A Fuel Additive in Internal Combustion Engine. International Journal of Advanced Trends in Computer Science and Engineering, 10 (6). pp. 3165-3172. ISSN ISSN 2278-3091. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Hammid, Ali Thaeer and I. M., Yusri and Mohd Adnin, Hamidi and Humada, Ali Mahmood and Ahmad Fitri, Yusop (2018) Overview of the oxygenated fuels in spark ignition engine: Environmental and performance. Renewable and Sustainable Energy Reviews, 91. pp. 394-408. ISSN 1364-0321. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ali, Obed Majeed and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and I. M., Yusri and Rasul, Muhammad (2017) Study of Diesel-biodiesel Fuel Properties and Wavelet Analysis on Cyclic Variations in a Diesel Engine. Energy Procedia, 110. pp. 498-503. ISSN 1876-6102 . (Published)

Conference or Workshop Item

Norkhizan, A. M. and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi (2023) Experimental investigation of a diesel engine using waste plastic oil blends. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 133-143.. ISSN 2195-4356 ISBN 978-981191456-0

M., Jamil and Mohd Adnin, Hamidi and Ahmad Fitri, Yusop and M. F., Zakiyuddin and Mohd Nadzeri, Omar (2023) Study of engine performance, emission and combustion of reactivity controlled compression ignition (RCCI) mode engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 51-63.. ISSN 2195-4356 ISBN 978-981191456-0

Muhammad Azri, Muhammed Nor and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Reliability, availability, maintainability and safety (rams) in railway’s assurance system and implementation challenges : A Review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 148..

Nik Mohd Azrin, Nik Aziz and Daing Mohamad Nafiz, Daing Idris and Saiful Anwar, Che Ghani and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and Muhammad Hanif, Abd. Rasid (2022) Stability analysis of multirotor drone with water jet payload. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 77..

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Response Surface Methodology to Predict the Effects of Graphene Nanoplatelets Addition to Diesel Engine Performance. In: International Conference on Alternative Fuels and Electric Vehicles 2021 , 9-10 December 2021 , Pune, India (Virtual). .

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on Graphene Application: Focus on Application as Additive in Internal Combustion Engine. In: International Conference on Technical and Vocational Education and Training (IConTVET 2021) , 4-5 February 2021 , Langkawi (Virtual Mode). . (Unpublished)

Izuan, Izzudin and Ahmad Fitri, Yusop and Syazwana, Sapee and Mohd Adnin, Hamidi and I. M., Yusri and R., Mamat and E., Erdiwansyah (2020) Experimental studies of engine single cylinder run on diesel-biodiesel-butanol blends. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

Muthanna, Jamil and Mohd Adnin, Hamidi and Ahmad Fitri, Yusop and Muhammad Anas, Abdul Aziz and Mohamad Fathin, Hamidi and Tatchineswaranpillai, Sundram (2020) Simulation of the ignition mechanisms of low and high octane number blended fuels in HCCI engine. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-11., 788 (012058). ISSN 1757-899X

Hairul, Bakri and Mohd Adnin, Hamidi and Mohd Shukri, Yob (2019) Finite Element Analysis on critical relative slippage of bolted joint under transverse loading. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 172-173.. ISBN 978-967-2145-65-3 (online)

Haslizam, Abdullah and Mohd Adnin, Hamidi and Saiful Anwar, Che Ghani (2019) Process improvement of multiple agarwood oil extractions using low-cost multi-channel temperature data logger. In: International Conference On Advances In Mechanical Engineering And Nanotechnology (ICAMEN 2019) , 6 - 11 March 2019 , Manipal University Jaipur India. pp. 1-6.. (Unpublished)

Nurziana Kong, Johan Kong and R. A., Bakar and Lim Yi, Leang and Mohd Adnin, Hamidi (2019) The analysis of wind blade on the performance of vertical axis wind turbine (VAWT). In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M. A. A., Aziz and Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and Mohd Adnin, Hamidi and Azri, Alias and H., Hussin and S., Hamri (2017) Study of alcohol fuel of butanol and ethanol effect on the compression ignition (CI) engine performance, combustion and emission characteristic. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-13., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Thesis

Mohd Adnin, Hamidi (2016) Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Adnin, Hamidi (2013) Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).