Items where Author is "Nuruzzaman, D. M."

Article

Iqbal, A. K. M. Asif and Sakib, Nazmus and Iqbal, A. K. M. Parvez and Nuruzzaman, D. M. (2020) Graphene-based nanocomposites and their fabrication, mechanical properties and applications. Materialia, 12 (100815). pp. 1-22. ISSN 2589-1529. (Published)

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Wear and mechanical characterization of Mg-Gr self-lubricating composite fabricated by mechanical alloying. Journal of Magnesium and Alloys, 7 (2). pp. 283-290. ISSN 2213-9567. (Published)

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996. (Published)

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite. Russian Journal of Non-Ferrous Metals, 60 (3). pp. 274-281. ISSN 1934-970X (Online). (Published)

Chowdhury, M. A. and Debnath, U. K. and Nuruzzaman, D. M. and Islam, Monirul (2017) Erosion of Mild Steel for Engineering Design and Applications. Journal of Bio- and Tribo-Corrosion, 3 (3). pp. 1-17. ISSN 2198-4220(print); 2198-4239(online). (Published)

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2017) The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 45 (3). pp. 773-787. ISSN 0090-3973. (Published)

Chowdhury, M. A. and Debnath, U. K. and Mia, M. S. and Nuruzzaman, D. M. (2017) Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix. International Journal of Materials Engineering Innovation, 8 (3-4). pp. 159-172. ISSN 1757-2754. (Published)

Mia, Md. Shahin and Chowdhury, Mohammad Asaduzzaman and Rahaman, Mohammad Lutfar and Nuruzzaman, D. M. and Das, Suman and Debnath, Uttam Kumar (2017) Friction and Wear of Non-Ferrous Materials Under Artificially Created Vibration for Machine Design. International Journal of Materials Engineering Innovation, 8 (2). pp. 96-121. ISSN 1757-2754. (Published)

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam Kumar and Nuruzzaman, D. M. and Islam, Md. Monirul (2017) Study of Erosive Surface Characterization of Copper Alloys under Different Test Conditions. Surfaces and Interfaces, 9. pp. 245-259. ISSN 2468-0230. (Published)

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2016) Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers. Materials Performance and Characterization, 5 (1). pp. 312-329. ISSN 2165-3992 . (Published)

M. M., Rahman and Chowdhury, M. A. and Nuruzzaman, D. M. and Debnath, U. K. and Kowser, M. A. and Roy, B. K. (2016) Deposition Rates on Stainless Steel Substrates of Different Surface Roughnesses Under Different Operating Conditions using Thermal CVD. International Journal of Surface Science and Engineering, 10 (3). pp. 282-302. ISSN 1749-7868. (Published)

Nuruzzaman, D. M. and Farah Fazira, Kamaruzaman and NasrahAzmi, Mohd Azmi (2016) Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials. International Journal of Engineering Materials and Manufacture, 1 (2). pp. 59-64. ISSN 0128-1852. (Published)

Iqbal, AKM Asif and Nuruzzaman, D. M. (2016) Effect of the Reinforcement on the Mechanical Properties of Aluminium Matrix Composite: A Review. International Journal of Applied Engineering Research, 11 (21). pp. 10408-10413. ISSN 0973-4562. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. (2016) Erosive Wear Characteristics of Multi-Fiber Reinforced Polyester under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. (Published)

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam K. and Nuruzzaman, D. M. and Islam, Md. Monirul (2016) Experimental Analysis of Aluminum Alloy under Solid Particle Erosion Process. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230 (12). pp. 1516-1541. ISSN 2041-305X. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and A. N., Oumer and Ismail, N. M. and Basri, S. (2016) Experimental Investigation on the Mechanical Properties of Glass Fiber Reinforced Nylon. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, M. L. and A. N., Oumer (2016) Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. (2016) Investigation of Thin Film Deposition on Stainless Steel 304 Substrates Under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Kamaruzaman, F. F. B. (2016) Processing and Mechanical Properties of Aluminium-Silicon Carbide Metal Matrix Composites. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Debnath, U. K. and Islam, M. M. (2015) Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle. Advances in Tribology, 2015. pp. 1-31. ISSN 1687-5915. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman and Basri, S. and Nur Amira Mardian, Zulkifli (2015) Fabrication and Mechanical Properties of Aluminium-Aluminium Oxide Metal Matrix Composites. International Journal of Mechanical and Mechatronics Engineering (IJMME), 15 (6). pp. 68-75. ISSN 2227-2771 (Print); 2077-124X (Online). (Published)

Latiff, M. I. A. and Jamaludin, S. N. S. and Basri, S. and Hussain, A. and Alothmany, D. S. and Mustapha, F. and Nuruzzaman, D. M. and Ismail, N. M. and Ismail, I. (2014) Effect of Sintering Temperature on Functionally Graded Nickel/Alumina Plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Nuruzzaman, D. M. and Rahaman, Mohammad Lutfar and Chowdhury, M. A. (2014) Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding Against Different Counterface Materials. Advanced Materials Research, 903. pp. 90-95. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Chowdhury, M. A. K. and Roy, B. K. (2014) Experimental Study of Friction Coefficient and Wear Rate of Turned and Ground Mild Steel Surfaces Sliding Against Smooth and Rough SS304 Counterfaces. Australian Journal of Mechanical Engineering, 12 (3). pp. 291-304. ISSN 1448-4846. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Roy, B. K. and Sorker, N. Ch. and Karim, R. and Hasan, M. and Mia, S. (2014) Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials. Journal of the Balkan Tribological Association, 20 (2). pp. 169-183. ISSN 1310-4772. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, A. and Rahman, M. and Roy, B. K. and Chakraborty, S. and Hossen, S. and Uddin, I. and Hossain, S. (2014) Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces. Middle-East Journal of Scientific Research, 21 (3). pp. 477-486. ISSN 1990-9233. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, Mohammad Lutfar (2014) Frictional Characteristics of Steel Materials Sliding against Mild Steel. Advanced Materials Research, 903. pp. 33-38. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, M. A. and M. M., Rahman and Roy, B. K. and Chakraborty, S. and Islam, M. D. and Aktaruzzaman, M. and Mohammad, N. (2014) Sliding Friction of Steel Combinations. The Open Mechanical Engineering Journal, 8. pp. 364-369. ISSN 1874-155X. (Published)

Siti Nur Sakinah, Jamaludin and Shah Nor, Basri and Hussain, Ahmad and Al-Othmany, Dheya Shujaa and F., Mustapha and Nuruzzaman, D. M. (2014) Three-Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate. Mathematical Problems in Engineering, 2014. pp. 1-20. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952. (Published)

Chowdhury, M. A. and Nuruzzaman, D. M. and Roy, Biplov Kumar (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 304 Sliding against Smooth and Rough Mild Steel Counterfaces. Gazi University Journal of Science, 26 (4). pp. 597-609. (Published)

Chowdhury, Mohammad Asaduzzaman and Nuruzzaman, D. M. and Roy, Biplov Kumar and Rahman, Muhammad Mahmudur and Azad, Md. Abul Kalam and Rahman, Md.Mijanur and Bhumik, Shazib (2013) Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces. Journal of American Science, 9 (5). pp. 361-368. ISSN 1545-1003 (Print); 2375-7264 (Online). (Published)

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Faizal, Mustapha and Shah Nor, Basri (2013) A Review on the Fabrication Techniques of Functionally Graded Ceramic-Metallic Materials in Advanced Composites. Scientific Research and Essay , 8 (21). pp. 828-840. ISSN 1992-2248. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. (2012) Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies , 4 (1). pp. 29-40. ISSN 2228-9860(print); 1906-9642(online). (Published)

Conference or Workshop Item

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6 (Published)

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Fabrication and characterization of Al2O3 nanoparticle reinforced aluminium matrix composite via powder metallurgy. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 190-195., 29 (1). ISSN 2214-7853 (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853 (Published)

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Suriati, Ghazali and Nuruzzaman, D. M. (2018) Thermal properties of polyethylene reinforced with recycled– poly (ethylene terephthalate) flakes. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 17578981 (Published)

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Nuraini, Abdullah and Noor Mazni, Ismail and Nuruzzaman, D. M. (2018) Preparation of tin oxide (SnO2) thin films using thermal oxidation. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Chowdhury, M. A. and Rahman, N. A. N. A. and Oumer, A. N. and Fatchurrohman, Nanang and Iqbal, A. K. M. A. and N. M., Ismail (2018) Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

Iqbal, AKM Asif and Mei, Jing Lim and Nuruzzaman, D. M. (2017) Effect of compaction load and sintering temperature on the mechanical properties of the Al-SiC nano-composite materials. In: AIP Conference Proceedings: Advanced materials for sustainability and growth: Proceedings of the 3rd Advanced Materials Conference (AMC2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-8., 1901 (030006). ISSN 1551-7616 ISBN 978-0-7354-1589-8 (Published)

Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Faizal, Mustapha and Nuruzzaman, D. M. and Muhammad Ihsan, Abdul Latiff and Noor Mazni, Ismail (2017) Phase Contamination Characterization of Stepwise-built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. In: 5th International Conference on Engineering and Innovative Materials, ICEIM 2016 , 10 - 12 September 2016 , Kuala Lumpur, Malaysia. pp. 90-96., 889. ISSN 0255-5476 (Published)