Items where Author is "Quazi, M. M."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 27.

Article

Zul, M. H. and Ishak, M. and Nasir, R. M. and Aiman, M. H. and Quazi, M. M. (2023) Effect of laser-textured surface of Ti6Al4V on frictional wear behavior. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (1). pp. 10165-10174. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yusof, M. F.M. and Quazi, M. M. and Aleem, S.A.A. and Ishak, M. and Ghazali, M. F. (2023) Identification of weld defect through the application of denoising method to the sound signal acquired during pulse mode laser welding. Welding in the World, 67 (5). pp. 1267-1281. ISSN 00432288. (Published)

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak (2023) Mel-frequency cepstral and spectral flux analysis of the acoustic signal for real-time status monitoring of laser cleaning. Materials Research Express, 10 (106506). pp. 1-23. ISSN 2053-1591. (Published)

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Naveed, M. and Arslan, A. and Javed, H. M. A. and Manzoor, T. and Quazi, M. M. and Imran, T. and Zulfattah, Z. M. and Khurram, M. and Fattah, I. M. R. (2021) State-of-the-art and future perspectives of environmentally friendly machining using biodegradable cutting fluids. Energies, 14 (16). pp. 1-35. ISSN 1996-1073. (Published)

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Shehzad, Aamir and Ahmed, Arslan and Quazi, M. M. and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Masjuki, Haji Hassan and Muhammad Asif Javed, Hafiz (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (5). pp. 1-36. ISSN 1996-1073. (Published)

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and Quazi, M. M. and Aiman, Mohd Halil and Yamasaki, Kazuhiko (2021) Pulsed ND YAG laser parameter effect on welding uncoated Advanced High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

R., Linggamm and M. Nasir, Bashir and Quazi, M. M. and M., Ishak (2021) The influence of nanosecond fibre laser on the removal of paint on metallic surface. International Journal of Technology and Engineering Studies, 7 (2). pp. 1-7. ISSN 2414-3413. (Published)

Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Arslan, A. and Masjuki, H. H. and Quazi, M. M. and Kalam, Md. Abul and Varman, M. and Jamshaid, M. and Rahman, S. M. Ashrafur and Imran, M. and Zulfattah, Z. M. and Anwar, M. T. and Gohar, G. A. and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-2. ISSN 2053-1591. (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and M. Nasir, Bashir and Imran, Ali (2018) Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy. Journal of Adhesion Science and Technology, 32 (6). pp. 625-641. ISSN 0169-4243. (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and Fazal, M. A. and Sazzad, B. S. and Bashir, M. Nasir and Jamshaid, M. (2018) Mechanical and tribological performance of a hybrid MMC coating deposited on Al–17Si piston alloy by laser composite surfacing technique. RSC Advances, 8 (13). pp. 6858-6869. ISSN 2046-2069. (Published)

Conference or Workshop Item

Syakila, A. R. and Jamaludin, M. N. and Quazi, M. M. and Aiman, Mohd Halil and Arslan, A. (2024) Effect of laser parameters on colour marking of Ti6Al4V titanium alloy. In: Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12 - 13 September 2023 , Kuantan. pp. 1-11., 2688 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Haneef, M. S. and Lau, G. H. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2023) Effect of laser micro-drilling parameters on hole geometry and hole formation of thin sheet SS304. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 803 -813.. ISSN 2195-4356 ISBN 978-981191456-0

Zaifuddin, A. Q. and Afiq, M. D. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2022) Effect of laser surface modification on SS316L surface roughness and laser heating temperature. In: Lecture Notes in Mechanical Engineering; International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Conference. pp. 959-969.. ISBN 978-981-19-1457-7

Y. Erny, A. M. Y. and Fadhil, A. R. and Aiman, Mohd Halil and Mahadzir, Ishak and Quazi, M. M. (2021) Comparative study between furnace brazing and laser brazing. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-10., 1068 (012003). ISSN 1757-899X

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2021) Microstructure analysis and mechanical properties of dissimilar AA6061-AA7075 laser brazing with prefixed ER5356 filler. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012022). ISSN 1757-899X

M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2020) Effect of filler composition on microstructure and mechanical properties of MIG welded AA6061 and AA7075. In: National Conference For Postgraduate Research 2020 (NCON-PGR 2020) , 9 December 2020 , Universiti Malaysia Pahang. pp. 147-160.. (Submitted)

A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X

H., Tarizan and M., Ishak and Quazi, M. M. and Qaban, A. (2019) Friction stir welding of AZ31B magnesium alloy with ER4043 aluminium alloy filler. In: Proceedings of ARSSS International Conference , 18th November, 2019 , Oxford, United Kingdom. pp. 1-3..

Qaban, Abdullah and Quazi, M. M. and Naher, Sumsun (2019) The inhibition effect of tannic acid on corrosion behaviour of HSLA steel in pure water. In: Proceedings of ARSSS International Conference , 18th November, 2019 , Oxford, United Kingdom. pp. 4-6..

This list was generated on Mon Apr 15 01:28:36 2024 +08.