Browse by Author All List

A

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321. (Published)

G

G., Najafi and B., Ghobadian and Talal, Yusaf and Seyed Mohammad, Safieddin Ardebili and R., Mamat (2015) Optimization of Performance and Exhaust Emission Parameters of a SI (Spark Ignition) Engine with Gasoline–ethanol Blended Fuels using Response Surface Methodology. Energy, 90 (Prt 2.). pp. 1815-1829. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

H

Hojjat, Damirchi and G., Najafi and Siamak, Alizadehnia and B., Ghobadian and Talal, Yusaf and R., Mamat (2015) Design, Fabrication and Evaluation of Gamma-Type Stirling Engine to Produce Electricity from Biomass for the Micro-CHP System. Energy Procedia, 75. pp. 137-143. ISSN 1876-6102. (Published)

I

Ilva, Arashnia and G., Najafi and B., Ghobadian and Talal, Yusaf and R., Mamat and Maurice, Kettner (2015) Development of Micro-scale Biomass-fuelled CHP System Using Stirling Engine. Energy Procedia, 75. pp. 1108-1113. ISSN 1876-6102 . (Published)

M

Mohd Amiruddin, Fikri and Fatin Fatihah, Asri and Wan Mohd Faizal, . and Hasyiya Karimah, Adli and R., Mamat and Azmi, W. H. and A. I., Ramadhan and Talal, Yusaf (2020) Effects of heat transfer based water for three square multilayer absorber solar collector. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Perowansa, Paruka and Talal, Yusaf and G., Najafi (2015) Effects of Exhaust Gas Recirculation (EGR) on a Diesel Engine Fuelled with Palm-Biodiesel. Energy Procedia, 75. pp. 30-36. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and Talal, Yusaf and R., Mamat and Ahmad Fitri, Yusop (2014) Characterization of A Diesel Engine Operating with A Small Proportion of Methanol as a Fuel Additive in Biodiesel Blend. Applied Energy, 114. pp. 865-873. ISSN 0306-2619. (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) MILD Combustion: The Future for Lean and Clean Combustion Technology. International Review of Mechanical Engineering (IREME), 8 (1). pp. 251-257. ISSN 1970-8734 (print); 1970-8742 (cd-rom). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) The Simulation of Biogas Combustion in a Mild Burner. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 995-1013. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) Detail Guide for Cfd on the Simulation of Biogas Combustion in Bluff-Body Mild Burner. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-25.. (Unpublished) (Unpublished)

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) The Development of Mild Combustion Open Burner Experimental Setup. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-20.. (Unpublished) (Unpublished)

M. M., Noor and Talal, Yusaf and Wandel, Andrew P. (2013) Mild Combustion: The Future for Lean and Clean Combustion. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-15.. (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) The Analysis of Recirculation Zone and Ignition Position of Non-Premixed Bluff-Body for Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1176-1186. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Design and Development of MILD Combustion Burner. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 664-676. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and Talal, Yusaf and Baker, P. and Hamawand, I. (2013) Effect of Compressed Natural Gas Mixing on the Engine Performance and Emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1416-1429. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner. In: Proceedings of the Australian Combustion Symposium , November 6-8, 2013 , The University of Westerm Australia. . (Published)

O

Obed M., Ali and Talal, Yusaf and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2014) Influence of Chemical Blends on Palm Oil Methyl Esters’ Cold Flow Properties and Fuel Characteristics. Energies, 7 (7). pp. 4364-4380. ISSN 1996-1073 . (Published)

T

Talal, Yusaf and Mohamd, Laimon and Waleed, Alrefae and Kadirgama, Kumaran and Hayder A., Dhahad and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Belal, Yousif (2022) Hydrogen energy demand growth prediction and assessment (2021–2050) using a system thinking and system dynamics approach. Applied Sciences (Switzerland), 12 (2). pp. 1-16. ISSN 2076-3417. (Published)

Talal, Yusaf and Louis, Fernandes and Abd Rahim, Abu Talib and Yazan S. M., Altarazi and Waleed, Alrefae and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Rizalman, Mamat and Hayder, Al Dhahad and Benedict, F. and Mohamd, Laimon (2022) Sustainable aviation—hydrogen is the future. Sustainability (Switzerland), 14 (1). pp. 1-17. ISSN 2071-1050. (Published)

Z

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhammad, Mat Noor and Rosli, Abu Bakar and Sivaraos, Subramaniam and Talal, Yusaf and Alsalman, Ali and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2024) Exploring the Potentials of Copper Oxide and CNC Nanocoolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)