UMP Institutional Repository

Items where Division is "Faculty of Mechanical Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | C | D | E | F | G | H | I | J | K | L | M | N | R | S | T | V | W | Y | Z
Number of items: 312.

A

A. R. M., Rosdzimin and S. M., Zuhairi and C. S. N., Azwadi (2010) Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online)

Abd Faiz, Muhammad (2010) Effect of abrasive tools on surface finishing when grinding mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Adam, Abdullah (2010) A Study On Spray Characteristics Of Straight Vegetable Oil. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Abdul Aziz, Safiee (2010) Design and manufacture simple portable astro receiver stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2010) Optical study of ethanol gasoline blends with or without heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Halim, Hadzir (2010) Development of automated storage and retrieval system (AS/RS) prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Khaliq, Abdul Kadir (2010) Design and fabrication of umbrella swing stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Asas (2010) Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Sabri (2010) Spray simulation of hydrogen fuel for spark ignition engine using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Aizad, Jamil (2010) Design and fabricate mini biogas digester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Asyraf, Ramli (2010) Theoretical analysis of solar water heating system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azam Azizan, Azlan (2010) Fatigue crack growth analysis of stainless steel under mode 1. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Basyir, Sadan (2010) Corrosion and mechanical properties study of car steel sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hazury, Hamid (2010) Design of a mechanism to mix biogas with air in compression internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Mohamad (2010) Design and development of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Kamil, Miskam (2010) Effect of surface roughness on fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Makhzan, Ahmad Kamal (2010) Modification of existing water turbine system for application at local river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Mustakim, Mohd Rusli (2010) Comparison of automatic and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nazmi, Mohd Rose (2010) Performance of diamond tool in machining titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Rasdan, Ismail (2010) Biomechanics Analysis And Optimization Of Instep Kicking: A Case Study To Malaysian Footballer. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Ahmad Rasdan, Ismail (2010) Ergonomics Assessment Of Workstation Design In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Influence of Wet-Bulb Globe Temperature (WBGT) Towards Workers' Performance: An Anova Analysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 435-441.. ISBN 978-967-5080-9501 (CD ROM)

Ahmad Rasdan, Ismail (2010) Regression Analysis In Determining The Influence Of Relative Humidity Towards Workers' Performance. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) A Review Onwhole Body Vibrations Towards Human. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Thermal Comfort In A Closed Air Conditioned ICT Laboratory At Ungku Omar Polytechnic Malaysia. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Ahmad Rasdan, Ismail (2010) Assessment Of Noise Impact: A Case Study Dueto Aircraft Activities. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Case Study Of ISO/TS16949 Application In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Ridzuan, Ibrahim (2010) Analysis of connecting rod fracture using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zaki, Che Zainol Ariff (2010) Modal analysis of car disc brake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zul Hafiz, Ramli (2010) Effect of heat treatment on the corrosion resistance of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aida Azwa, A. Halim (2010) Taguchi approach on surface integrity of titanium in turning operation using tin coated cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Al Nazirul, Haron (2010) Design and fabricate multipurpose trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alexson, Abit (2010) Finite element modeling of cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amar Reza, Mohammad Firdaus (2010) Internal surface pipe roughness classification using high frequency acoustic evaluation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Abidin, Buran (2010) Performance of coated and uncoated carbide tools while dry machining aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Hamzah, Azahar (2010) Performance evaluation of FKM central unit air condition system/chilled water system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirruddin, Abdul Kadir and Mohd Razali, Hanipah (2010) Development Of A High Pressure Chamber For Spray Vessels. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Amirul Shazwan, Omar (2010) Design and manufacture the top head of a diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aneth Athea, Mat Som (2010) Design and fabricate smart laundry cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Annafi, Mohd Khobori (2010) Mold design & surface analysis of casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aravinda, Kottasamy (2010) Design and fabrication of laboratory scale micro-hydroturbine test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ariyono, S. and Cholis, N. (2010) A Review On Control Strategy For Electro-Mechanical Rubber Belt Continuously Variable Transmissions (CVT). In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Arunan, Siwaraju (2010) Design and fabrication of small scale trainer aircraft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmalina, Mohamad (2010) Full factorial and experimental investigation on surface integrity of stainless steel in wedm operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azlan, Mohd Saini (2010) Monitoring tool wear process in turning machine using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azmi, W. H. and Sharma, K. V. (2010) Estimation of Forced Convection Heat Transfer Coefficient of Nanofluids using Concept of Colburn Analogy. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. pp. 852-862.. ISBN 978-967-0120-04-1

Azmi, W. H. and Sharma, K. V. (2010) Influence Of Certain Thermo-Physical Properties On Prandtl Number Of Water Based Nanofluids. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 502-515.. ISBN 978-967-5080-9501

Azri Amzari, Ramli (2010) Evaluation and optimization of heat extraction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azriq Fildza, Anuardi (2010) Design and fabricate multifunction baby stroller. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Azam, Nizarudin (2010) Experimental study of heat transfer coefficient of nanofluid flow through a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

C

C.S, Nor Azwadi and N.I.N, Ibrahim (2010) Lattice Boltzmann Numerical Prediction of Natural Convection Heat Transfer in an Inclined Square Enclosure. In: DSFD 2010, 5-9 July 2010 , CNR- Piazzale Aldo Moro 7- Rome. pp. 1-11..

Che Amir Rajhan, Che Jaffar (2010) Springback prediction of mild steel sheet on L-bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ching Liang, Cho (2010) Mechanical properties of steel in aqueous corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

D

D., Ramasamy and Samykano, Mahendran (2010) Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design By Simulation And Experimental Techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang.

D., Ramasamy and Mahendran, Samykano and Zainal Ambri, Abdul Karim and T., Nagarajan (2010) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II, 17-19 March 2010 , Hong Kong. pp. 1589-1592., II. ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II, 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

Da, Wen Ge (2010) A Review On Continuously Variable Transmissions Control. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Dany Ak, Dominic Neng (2010) Cubic interpolated pseudo particle (CIP) - Lattice Boltzmann scheme for the simulation of lid-driven cavity flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

E

Emir Izwandy, Dzulkafli (2010) Effect of aging on machinability of 6061 aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Engku Izyan Munirah, Engku Afandi (2010) Performance analysis on the influent of front tyres movement to the steering wheel system for steady and ride road conditions. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

F

Fairul Idzwan, Mohd Rosni (2010) Finite element analysis of lumbar spine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fakir, Md Moslemuddin and M. M., Rahman and R. A., Bakar and S., Basri (2010) One-Dimensional Heat Transfer in a Convection-Tip Rectangular Thin Fin: A Comparative Study. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. pp. 12-22.. ISBN 978-967-0120-04-1

Fara Farhana, Abdul Basek (2010) Design and development of orange peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farhan, Ab Razak (2010) Cost reduction study of automotive part using DFA method headlamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faris Syafiq, Zakaria (2010) Design and fabricate of secured LCD remote control holder in UMP Pekan lecture room. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fazliana, Fauzun (2010) Design and development of 1-seated urban car chassis using aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fazlina, Mansor (2010) Designing and evaluating of jig for holding cylindrical parts for mass production for drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fua, Wai Loon (2010) Fatigue life and crack growth analysis of keyhole specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

G

Gan, Leong Ming (2010) Conceptual Design Of Photothermal Electrochemical Water Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Gan, Leong Ming and R. A., Bakar (2010) Development Of Multi Duty Cycle Sequential Gated Pulse Frequency Generator For Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Geetha, Muniandy (2010) An investigation of microstructure and mechanical properties of malleable cast iron using metal casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gobinath, Raman (2010) Design of a lift reduction device for passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

H

Hasbullah, Mat Isa (2010) Productivity improvement via simulation method (Manufacturing industry). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haslan, Mohd Yong (2010) Monitoring catastrophic failure event in milling process using acoustic emission. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Heng, Yee Wien (2010) Impact of Co2 laser cutting parameters on the quality of cut on PMMA sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi, Mohd Zahidi (2010) Tyre pressure monitoring system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

How, Sheng Boon (2010) Productivity improvement using industrial engineering tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

I

Idham Ariff, Mat Ali (2010) Design and analysis solar car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ismail, Ab.llah (2010) Performance of coated carbide cutting tool while machining aluminium alloy and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzat, Mohamad Adnan (2010) Algorithm development for optimization of a refrigeration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzul Izwan, Ismail (2010) Modal analysis of engine piston rod for small engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

J

Johari, Bar Azwar (2010) Investigation of circular based micropump diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jolhi, Brahim (2010) Design and fabrication of concentrated solar thermal (CST) system for solar cooker application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Juliawati, Alias and Mohamad Mazwan, Mahat and Mohd Akramin, Mohd Romlay (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis = pembangunan kaedah jangkaan pemecahan aneurisma menggunakan analisis mekanik rekahan. Other thesis, Universiti Malaysia Pahang.

K

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2).

K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509

K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482.

K., Kadirgama and M. M., Noor and B., Mohammad and H. H., Habeeb (2010) Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS. Advanced Materials Research, 83-86 . pp. 295-302. ISSN 1022-6680

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and V., Dharma Rao and T., Subramanyam (2010) Oxygen Stripping in Deaerator Feed Water: Condensation on Spray Droplets. Heat and Mass Transfer, 46 (6). pp. 665-673. ISSN 0947-7411

Khairil Anwar, Abu Bakar (2010) Multifunction broom. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Aizat, Abdul Rahim (2010) One-dimensional simulation of a 4-stroke SI engine employing novel cylinder head concept : intake and exhaust flow investigation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Faezi, Mohamad Alias@Ayit (2010) A computational model for aneurysm growth. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Ridhwan, Zainudin (2010) Thermodynamic analysis of ground source heat pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairulanwar, Abd Rani (2010) Design and development of gearing system for car simulator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

L

Lai, Si Ying (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software : swimming google. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lau, Zhen Chyen (2010) Experimental laser-machining of silicon wafer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lawrence, Blasius (2010) Performance analysis on percentage of wheel slip for a passenger car using GPS and wheel speed sensor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Ka Hung (2010) Effect of chip formation on tool wear in machining of titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Poh Seng (2010) Determination of certain thermo-physical properties of nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Wai Loon (2010) Effect of electrical discharge machining process parameter on surface topograhy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Liew, Annie Ann Nee (2010) Optimization of machining parameters of titanium alloy in electric discharge machining based on artificial neural network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Simon Hock Hua (2010) Feasible laser parameter in fabrication of MEMS structure on PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

M

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2010) Microstructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles. World Academy of Science, Engineering and Technology, 45 (2010). pp. 420-435. ISSN 2010-376x (print), 2010-3778 (online)

M. F. F., Ab Rashid and Mohd Rizal, Abdul Lani (2010) Surface Roughness Prediction for CNC Milling Process using Artificial Neural Network. In: Proceedings of the World Congress on Engineering 2010, 30 June - 2 July 2010 , London, UK. pp. 2219-2224..

M. M., Noor (2010) Experimental mnd Modeling Investigation of The Performance Characteristics on Diesel Hcci with Hydrogen Additive- A Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Noor and K., Kadirgama and M. M., Rahman (2010) Analysis of Auto Car Jack. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 MAY 2010 , Universiti Malaysia Pahang. .

M. M., Rahman and K., Kadirgama and M. M., Noor (2010) Artificial Intelligence Techniques for Machining Performance: a Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3).

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248

M. M., Rahman and Thamir K., Ibrahim (2010) Effects of Operation Conditions on Performance of a Gas Turbine Power Plant. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478.

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M.F, Yusoff (2010) Evaluation Of Acoustic Emission Behavior Under Hydrostatic Test In Api 5l X70 Steel Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Maaruf, Muhamad (2010) Design and development of transmission for two-seated urban car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahendran, Moorthy (2010) Performance of solar air-conditioning system using heat pipe evacuated tube collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahendran, Samykano (2010) Micro-Edm:Overview And Recent Developments. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2010) Effect of Cam Profile On Cylinder Pressure In Revetec Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Mohamad Abiddullah, Mohd Lasim (2010) Finite element based fatigue crack growth of cracked plates under axial loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ilme, Ahmad Bahri (2010) Design and fabricate a movable multifunction table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nazrin Kooy, Mohd Daniel Kooy (2010) Experimental and numerical analysis of deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saiful, Izwan Busu (2010) Wear of coated carbide insert in machining of mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saufi, Ayob (2010) Design of automatic control system to control the flow of biogas fuel into internal combustion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sazman, Sazali (2010) Fuel-saving plate-electrode base device on gasoline fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shaffawi, Zainon (2010) Effect of cylic stress range on crack growth of aluminium alloy under axial loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shafiq, Alias (2010) Design of small heat exchanger (double pipe type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Suffi, Kamari (2010) Surface integrity of mild steel in wire electrical discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yazid, Mohamad Yassin (2010) Designing and manufacture solar turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zahari, Hamdan (2010) Performance investigation of a small four stroke carburatted SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamed Reza Zalani, Mohamed Suffian and Mas Ayu, Hassan and Siti Haryani, Tomadi and Rosdi, Daud (2010) Effects Of Polarity Parameter On Machining Of Tool Steel Workpiece Using Electrical Discharge Machining. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohamed Reza Zalani, Mohamed Suffian and M. A., Hamdi and Azmir, Azhari (2010) Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . ISBN 978-967-5080-9501

Mohammad Amin, Mohamed (2010) Intake and exhaust ports flow investigation of 4-stroke SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Azlan, Abdul Aziz (2010) Comparison manual and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Muzahir, Ahmad (2010) Evaluation of fibers in used in fishing lines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Safuan, Sheafi (2010) Application of microcontroller to control pneumatic actuator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd 'Afif, Abd Aziz (2010) Optimization of molding parameter effect to warpage and shrinkage of laboratory goggle based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd 'Azim, Ab. Halim (2010) Surface integrity of titanium when machining with various cutting parameter. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizuddin, Mat Alwi (2010) Optimization of surface roughness in milling by using response surface method (RSM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Akramin, Mohd Romlay and Amirruddin, Abdul Kadir and Nasrul Azuan, Alang (2010) Hybrid Finite Element And Monte Carlo Analysis Of Cracked Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Amir Firdaus, Salleh (2010) Optimization of electrical discharge machine parameter on mild steel by using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asrul, Abu Bakar (2010) Parameter optimization of a cylindrical grinding operation for the quality of surface finish. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asyraf, Che Azmi (2010) Effect of heat treatment on the corrosion behavior of SS316 stainless steel in simulated body environment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ayub, Adnan (2010) Design of biogas digester (Indian type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azahan, Mohd Yusuff (2010) Test rig development for high pressure spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azee, Zaidee Ee (2010) Modeling and simulation of skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azrul Hisham, Mohd Adib (2010) Computational Analysis: Fluid Structure Interaction Model Of The Mitral Valve Leaflet. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Azuan, Abu Shah (2010) Mould design and mechanical analysis of the casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azzizul, Chamingan (2010) Corrosion inhibition of 6061 aluminium alloy in acidic media by honey. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Dzohairy, Mohammad Mohsan (2010) Front and rear suspension design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ezuwanizam, Masral (2010) Optimization of tool life in miling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Md Yusuf (2010) Performance of uncoated cutting tools when machining mild steel and aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Aziz (2010) Optimization of tool life using in milling using radial basis function network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakhrul, Anwar Alias (2010) Research study on inter-vehicle communication implementation in Malaysia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farid, Zainudin (2010) Vibration investigation of passenger car rear suspension system under various road condition and driving maneuever. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fauzi, Muhammad (2010) Comprehensive analysis of a light weight lift system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Ahmad Sani (2010) Effect of soil resistivity in Pekan campus to the corrosion behavior of steel pipe system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Musa (2010) Building energy analysis using cooling load factor/cooling load temperature different (CLF/CLTD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafeez, Alias (2010) Theoretical analysis of absorption chiller system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Razilah (2010) Fabrication of modal analysis test rig for clamped-clamped boundry condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Nawi (2010) Cost reduction study of automotive part using DFA method : rear lamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Ab Hamid (2010) Energy loss through the steam trap in a steam system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazmie, Hamdan (2010) Exhaust emission of waste plastic disposal fuel on single cylinder YANMAR diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Helmi, Abd Jalil (2010) The experimental study of effect of grinding process on thermal and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Herzwan, Hamzah (2010) Exhaust emission of single cylinder diesel engine by using tire disposal fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hishammudin, Donnie (2010) Design and development of a micro-EDM using micro-actuator tool feed control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizam, Mohd Noor (2010) Effect of aluminium oxide and silicon carbide abrasive type on mild steel surface temperature. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizir Arafar, Tambun (2010) Springback prediction of mild steel sheet on V-bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Samsudin (2010) Finite element modelling of abdominal aortic aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairil, Asri Kamaluddin (2010) Deceleration performance comparison for passenger car under on-road and off-road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Marhan, Asari (2010) A study on heat treatment of carburizing carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Muhyiddin, Ibrahim (2010) Optimization of cylindrical grinding parameter for the high product quality subject to roundness constraint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazmi, Mohd Nordin (2010) A study of tool wear prediction of cylindrical grinding wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Hisyam, Che Ab Aziz (2010) Fault detection for rotating machine using time frequency localization method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norhafizi, Rohaizat (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software: handphone casing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurazlan, Md Ghazali (2010) Kaizer effect in accoustic emission event from mechanical testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurul Akmal, Mohd Yusof (2010) Fracture toughness of railway track material using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qhairul, Mohd Bokhari (2010) Study of particles transport along second and third generation of human airways using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Abd Rashid (2010) Development of strain-based fatigue life calculation software for variable amplitude loading data. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ridzwan, Adnan (2010) Evaluation of nickel electroless plating on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rizal, Shafie (2010) One-dimensional simulation of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahmal, Mohd Shahid (2010) Study of F1 car aerodynamics rear wing using computational fluid dynamic (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shamil, Shaari (2010) Design optimization of connecting rod for internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syakir, Abdul Rahman (2010) Effect of aluminum oxide and silicon carbide abrasive type on stainless steel ground surface integrity. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazlan, Mohd Hatta (2010) Machining surface roughness monitoring using acoustic emission method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazrul Shafiq, Saad (2010) Study of F1 car aerodynamics front wing using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufidd, Tawang (2010) Numerical simulation of nanofluid forced convection heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Awang @ Mohammed (2010) Development of regression equation for heat capacity and density of nanofluids properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yusof, Taib (2010) Acoustic Emission Study Of Fatigue Crack Growth In Rail Track Material. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Yusof, Taib (2010) Analysis Of Functional Build (FB) In Aluminium Extrusion Process Innovation By Using Arena Software. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib (2010) Design And Development Of A Single Vane Rotating Sleeve Rotary Compressor For Refrigeration System. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib and Azizuddin, Abd Aziz (2010) Performance Analysis Of A Domestic Refrigerator. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusrizal, Mohd Yusoof (2010) Failure analysis of cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zambri, Abidin (2010) A study of acoustic emission in tensile test for metallic materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zuhairi, Md Zohir (2010) Springback prediction of mild steel sheet on 60° air bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulfadli, Kamarudin (2010) Reliability assesment of CNC turning center based on industrial statistics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulhilmi, Md Yusof (2010) Failure of drive shaft using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulhilmi, Rifin (2010) Effect of lubrication condition on surface roughness in turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulkarnain, Zulkifli (2010) Corrosion inhibition of 6061 aluminium alloy in marine environments by milk. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mon, Thet Thet and Z., Ghazalli and Asnul Hadi, Ahmad and Mohd Fazli, Ismail and Khairul Fikri, Muhammad (2010) Design of Electrostatic Comb Actuators based on Finite Element Method. In: International Conference on Enabling Science and Nanotechnology (ESciNano 2010), 1-3 December 2010 , Kuala Lumpur. pp. 1-3..

Moorthy, M. (2010) Performance Of Solar Air-Conditioning System Using Heat Pipe Evacuated Tube Collector. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Muhamad Afiq, Razali (2010) Effect of wheel grinder on the surface roughness when grinding aluminum alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Amzansani, Abd Wahab (2010) Design semi-active suspension using magneto-rheological damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Faisal Ezuarie , Draman (2010) Fuzzy active vibration control for lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Farkhanif, Jamaluddin (2010) Boothyord Dewhurst and Hitachi AEM design for assembly : a comparative study. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fikri Aziz, Mat Lah (2010) Study of pipe connector effect in piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Haniffah, Ghafar (2010) Surface integrity of mild steel in die-sinking electrical discharge machine (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Harif, Ghani (2010) Reliability study of diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Izwan, Sunawan (2010) Frame body structure for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Nazmi, Ahmad Nazari (2010) Fuzzy control on vehicle active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Rusydi, Ali (2010) Modeling and simulation of modified skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Zuhairi, Sulaiman and M. Rosdzimin, A. R. and N. Azwadi , C. S. (2010) Simulation Ofmixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2 (Jul. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online)

Muhammad, Nor Shakiman (2010) Simulation on airflow inside the nasal cavity with and without uncinate process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ali, Mohamed (2010) Fabrication of fuel saving device helical spring based on gasoline fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Alliff, Rahim (2010) One-dimensional simulation of two stroke hydrogen direct injection linear generator free-piston engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ashraf, Ali Zubir (2010) Visualization and analysis of the gasohol blends fuel spray pattern. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Bisharul Hafi, Ab Jalil (2010) Determination of heat transfer coefficient using experimental values of pressure drop of a single phase fluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Faizul Izreen, Othman (2010) Understanding performance analysis for front wheel drive (FF) sedan vehicle under steady and ride road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hamizi, Msduki (2010) Simulation of common rail for hydrogen engine in automobile application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hatifi, Mansor (2010) Intelligent Active Force Control Applied To Precise Machine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Hazim, Md Yusoff (2010) Availability and estimation of renewable energy for habitants living in remote places. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzuddin Hilmi, Zainal Abidin (2010) Computational fluid dynamics (CFD) analysis of a miniature wind turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Muizzuddin, Yusof (2010) Design and manufacture the inner shell of diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Rizuan, Musa (2010) Characteristic of palm oil methyl ester as alternative fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safuan, Othman (2010) Design for assembly and application using Boothroyd Dewhurst method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saifuddin, Idris and N. M. M., Ammar (2010) 2d Deep Cavity Flow, Lid Driven Using Conventional Methodwith New Perspective. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Saufi, Abdul (2010) Experimental study on the noise reduction of hydraulic bench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shukri, Rabain (2010) Performance and emission characteristics of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Ayob (2010) Upper body structure design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Taqiuddin, Mohamad Tabarani (2010) Design and analysis of a MRI miniature for children. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaharin, Zakaria (2010) Engine-propeller matching for fishing vessel at Kuala Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaim, Hassan (2010) Flow characteristic of an elliptically shaped piezoactuated micropump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulfadhli, Roslane (2010) Design and fabricate adjustable lab chair with back rest. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mustaqim, Mohamad (2010) Effect of exhaust gas recirculation to performance and emissions of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muzakkir, Shukri (2010) Analysis the effect of different type valve use at different pressure in piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

N.I, Nik Izual and C.S, Nor Azwadi (2010) Lattice Boltzmann Numerical Scheme for the Simulation of Natural Convection in an Inclined Square Cavity. WSEAS TRANSACTIONS on MATHEMATICS, 9 (6). ISSN ISSN: 1109-2769

Nabil Fahmi, Mohtar (2010) Modal analysis of pipe joint spiral wound gasket. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Naeem, Zulkifle (2010) Modal analysis of notched beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Navindran, Subramaniam (2010) Effect of exhaust temperature on the performance of a diesel engine with EGR. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazirul Izzat, Ibrahim (2010) Development of single cylinder engine test rig for small engine dyno. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Kok Chuan (2010) Development of impact strength model for human synthetic bone. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohd Nazairen, Nik Cob (2010) Electrochemical study of heat treated SS304 stainless steel is simulated body fluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohd Qamarul Shafiq, Nik Ahmad Kamil (2010) Performance evaluation of solar flat plate collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Akmal, Zolkifli (2010) Design and development of integrated chassis of one seated urban car using embedded aluminium and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hazira, Mohamad Haidzir (2010) Experimental analysis of gyroscopic effect on vehicle vibration and accident potential. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hizam Dzulkharnain, Mohd Hassan (2010) A numerical study on the effect of gasoline-hydrogen fuel blend on engine power and torque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Azzah, Abu Azmi (2010) Automated guided conveyor (AGC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Fadilah, Yah (2010) Design and fabricate the smart rack shoes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Nashriq Azizi, Abd Shukor (2010) Evaluate fin performance of a space radiator to remove heat generated for outer space application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazlin, Md. Kalil (2010) Manufacturing of 10 cc volumetric displacement four stroke petrol model engine cylinder block using metal casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norlida, Jamil (2010) An evaluation of Ni-Alumina composite electroplating on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nornadia, Annuar (2010) Cost optimization of bathroom scale by using Boothriyd-Dewhurst DFA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norzikri, Sairi (2010) RFID based security system for vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Afnan, Abdul Halim (2010) Design and development of integrated chassis of three wheel prototype car using aluminum and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ashikin, Usri (2010) Experimental study of heat transfer coefficient for nanofluid with inserted tape. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Atiqah, Ramlan (2010) Design and development of a manual breast pump : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fasehah, Maarop (2010) Reverse modeling of car door using laser scanning methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Hamizah, Minhat (2010) Investigation of brass microstructure and mechanical properties using metal casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Naquiah, Mohammad Ali (2010) Automotive engine fault diagnosis using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Hidayah, Abdul Samat (2010) Study of ground source heat pump as cooling system for local applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

R

R., Mamat (2010) Comparative Study On Diesel Engine Performance Operatingwith Biodiesel And Diesel Fuel. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

R., Mamat (2010) One-Dimensional Simulation For Single Cylinder Diesel Engine Operating With Ethanol. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar (2010) Design And Developmentof Actuation Part Of Piezoelectric Generator Prototyping For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar (2010) Development Assessment Of Solar Concentrating Power System for Green Energy Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Rabiatuladawiah, Kamaruddin (2010) Design of a small heat exchanger (Shell-and-tube type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Sharul Azuan, Raja Kamaralzaman (2010) Development of liquid spray triggering and control. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ruzaimi, Zainon (2010) Optimization of surface roughness in milling using neural network (NN). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

S

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z. and Browne, D. (2010) Laser Micro-Processing Of Amorphous And Partially Crystalline cu45Zr48Al7 Alloy. Applied Physics A: Materials Science and Processing, 101. pp. 357-360.

S.N.S, Jamaludin and R. A., Bakar (2010) Experimental Performance Testing Of The Actuation Part Of Piezoelectric Generator For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Sahwal Waty, Marno (2010) Effects of hole taper on mild steel machining using injection flushing type of electrical discharge machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Santhana Julias, Henry (2010) Modal analysis for small engine crankshaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Santoso, W. B. and Ariyono, S. (2010) Combustion Characteristics Of A Diesel- Hydrogen Dual Fuel Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. . ISBN 978-967-0120-04-1

Shahaneem, Sa'hari (2010) A study on the influence of matrix distribution to the properties of polymer matrix composite (PMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharifah Rafidah, Syed Hamid (2010) A study on the effect of injection moulding process parameters to the properties of injected parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharma, Korada Viswanatha (2010) Application Of Design Patterns And Space Concepts In The Development Of Heat Pipes. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Siti Haifullia, Ayob (2010) Fuel-saving device rod electrode based on gasoline for fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Hajar, Mohd Noh (2010) Uncertainty analysis for the unknown function using artificial neural network (ANN) approximated function. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norazila, Zahari (2010) Design and development of a durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Sarah, Ahmad (2010) Modal analysis of fixed-fixed beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sunil Shanaz, Redzuan Perpinder (2010) Power system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sup, Billy (2010) Effect of Absorber plate material on flat plate collector efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahrizad, Muhamad (2010) Optimization of surface texture in milling using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syed Mohamad Amiruddin, Syed Saleh (2010) Actuation system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

T

Tanti Zanariah, Shamshir Ali (2010) Vibration investigation of passenger car front suspension system under various road condition and driving maneuvers. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tee, Chun Teck (2010) Productivity improvement for furniture industry by using witness simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tg Kamarul Azhan, Tg Kamaruddin (2010) Design and fabricate rocket engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thamir K., Ibrahim and M. M., Rahman and Abdalla, Ahmed N. (2010) Study on The Effective Parameter of Gas Turbine Model with Intercooled Compression Process. Scientific Research and Essay , 5 (23). pp. 3760-3770. ISSN 1992-2248

Thinesh Chander, Sawalingam (2010) Design and development of micro EDM using micro actuator tool feed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thong, Yee Han (2010) Preliminary design of single rubber belt with electro-mechanical continuously variable transmission (CVT). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tiong, Chung Shia (2010) Computational laser micromachining for machining PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tuan Mohd Shakir, Abu Bakar (2010) Design and manufacture the outer shell of diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

V

Vijayakumar, Marimuthu (2010) CFD analysis of air intake system of 1.6 l Proton Waja engine by adding guide vanes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

W

Wan Hazmin, Wan Osman (2010) Performance of PID controller for engine speed controller using CVT. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohamad Asyraf, Wan Zahari (2010) Effect of pipe diameter in piping system using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohamad Dasuqi, Wan Ma'sor (2010) Simulation of bubles rise in cavity using Lattice Bolztmann [sic] method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hasif, Wan Haron (2010) Computational fluid dynamics analysis of propeller with and without fins. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Ab Latif (2010) Numerical simulation of liquid atomisation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wong, Yin Ying (2010) Investigation mechanical properties and microstructure of aluminium silicon alloy using sand casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Y

Yeap, Leong Hooi (2010) Corrosion prevention of steel sample in aqueous solutions and its mechanical properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yong, Chee Ping (2010) Feasible laser parameters in fabrication of MEMS structures on silicon. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yusri, Yusof (2010) Design and analysis of the solar car body. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Z

Z. M. , Hafizi (2010) A Study Of Acoustic Emission Intensity Effect During Fuel Injector Fault. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Z. M. , Hafizi and Che Ku Eddy Nizwan, Che Ku Husin (2010) High Frequency Acoustic Signal Analysis for Internal Surface Pipe Roughness Classification. In: The International Conference on Experimental Mechanics (ICEM 2010), 29 Nov. – 01 Dec. 2010 , Kuala Lumpur, Malaysia. .

Zainulariffin, Awang (2010) Failure analysis of pipe joint spiral wound gasket using finite element analysis (FEA). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zamri, Mohamed (2010) Designing Driver Space for Large Car. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

Zamri, Mohamed and Mohd Yusof, Taib and Mohamed Reza Zalani, Mohamed Suffian (2010) Assessment Method for Course Outcome and Program Outcome In Outcome Based Education (OBE). In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2010) , 28-29 June 2010 , Melaka, Malaysia. .

Zanatul Nadia, Zakaria (2010) Design of fiberglass rescue boat by using waste plastic bottles. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zarul Shazwan, Zullkafli (2010) Failure of pistons engine using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Husin (2010) Prediction of fatigue life on lower suspension arm subjected to variable amplitude loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

This list was generated on Wed May 22 18:42:00 2019 +08.