Items where Division is "Faculty of Manufacturing Engineering" and Year is 2012

A

Abd Rahman Fahmi, Mat Hasan (2012) Analyze the inefficient takt time production and high customer complaint for support wheel carrier component to improve Lean production system level at Autokeen Sdn.Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Rashid, Muhammad (2012) Effects of tool path strategies on surface roughness in high speed milling. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Shahrul Amrie, Mohd Supri (2012) The study on the effect of laser power on kerf width for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aida Syamsiah, Mohd Yusof (2012) Investigation of heat treatment on weld joint of steel and aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aina Azliyana, Mohamad (2012) Simulation of auto –tuning pid controller for dc motor using Ziegler-Nichols method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aini Rushda, Md Desa (2012) Effects of cutting tool coating on surface roughness in machining pre-hardened steel (p20). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amir Asri, Mohd Al Kharid (2012) Design and development of semi automatic canting tool (Electrical). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anwar, P. P. A. Majeed and David, N. V. and S., Khairiyah (2012) Elastic And Dynamic Response Characteristics Of Kenaf/polypropylene Composites. In: High Performance Structures and Materials VI. WIT Transactions on The Built Environment, 124 . WIT Press, pp. 395-404. ISBN 978-1-84564-596-0 (print); 978-1-84564-597-7 (online)

Azeddien, Kinsheel and Zahari, Taha and Abdelhakim, Deboucha and Tuan Mohammad Yusoff, Tuan Ya (2012) Robust Least Square Estimation Of The CRS A465 Robot Arm's Dynamic Model Parameters. Journal of Mechanical Engineering Research, 4 (3). pp. 89-99. ISSN 2141-2383. (Published)

C

Cek Seng, Koh (2012) Line balancing technique implementation in a small and medium industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

D

Daelami, Aminuddin (2012) Development of mini micro injection moulding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

E

Ebrahim, Nader Ale and Shamsuddin, Ahmed and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2012) Effective Virtual Teams for New Product Development. Scientific Research and Essay , 7 (21). pp. 1971-1985. ISSN 1992-2248. (Published)

Edwin Hanjiang, Chan (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ee Shuang, Lau (2012) Implementation of 7 QC tools by using Kaizen approach for SME manufacturing industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

F

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)

G

Ghaderi, Hadi and Avakh Darestani, Soroush and Zulkiffle, Leman and Mohd Yusof, Ismail (2012) Horizontal collaboration in logistics: A feasible task for group purchasing. International Journal of Procurement Management, 5 (1). pp. 43-54. ISSN 1753-8440. (Published)

H

Hajar, Abdullah (2012) Lean production system knowledge improvement by implementing lean production system simulation game at WSA Engineering Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hartini, Mustafa and A. R., Yusoff and M. Yusoff, Ismail (2012) Productivity study and line balancing of GGMG & CALICO production line. Advanced Materials Research, 576. pp. 700-704. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Husnul ‘Asyiyyah, Mohamad @ Awang (2012) Development of vision autonomous guided vehicle behaviour using neural network. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

K

Khairul Azri, Ngadimen (2012) Develop a weight detection unit of the glass collection machine with reward system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Koo, Nelton Chwee Yang (2012) Design of wind tunnel (fluid flow analysis). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kunasegeran, Thinesh (2012) Direct current motor control led by microcontroller created PWM. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

L

Le Xin, Lee (2012) Design of obstacle avoidance robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Qian Bing (2012) Implementation of ordering kanban for supplier at company Proreka (M) Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

M

M. Nafis, O. Z. and Nafrizuan, Mat Yahya and Munira, Ali and Kartina, Johan (2012) Review on CNC-rapid prototyping. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012032). ISSN 1757-899X (Published)

M. S., Idris and M.Irwan, M. A. and N. M. M., Ammar (2012) Steady State Vortex Structure of Lid Driven Flow Inside Shallow Semi Ellipse Cavity. Journal of Mechanical Engineering and Sciences (JMES) , 2 (Jun. pp. 133-147. ISSN 2231-8380 . (Published)

Mohamad Al Rassid, Mohamad Borhanudin (2012) A new material supply mechanism for plunger type injection molding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Hafiz, Mohamad (2012) A new multipurpose soap dispenser prototype using design for manufacturing (DFM) approach. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Syahmi, Shahrom (2012) Taguchi method approach on effect of lubrication condition on surface roughness in milling operation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Farhan, Othman (2012) Analysis and prediction of micro injection molding part using moldflow simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Muaz, Nordin (2012) Design and developement of semi automatic canting tool (body design and mechanism). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Ali Amri, Muhammad Hassan (2012) Mechanical properties of the acrylonitrile- butadienne- styrene (abs) – mixed recycled abs. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Azhar, Sahwan and Mohd Nizam, Ab Rahman and Baba, Md Deros (2012) Barriers to implement lean manufacturing in Malaysian automotive industry. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 107-110. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Naeemil Mahmudi, Mahmud (2012) Reducing wrinkling and tearing of deep draw part. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Raz Firdaus, Ramli (2012) Design improvement of coffee maker using design for assembly (DFA) method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Saffririzal, Abdul Halim (2012) An integrated type of MIG torch cleaner. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Sufian, Jamaludin (2012) A study of the causes of bouncing problems of shock absorber. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd U'Kasyah, Hashim (2012) Optimization of feed system design in family mould using mould flow simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Edham, Saharudin (2012) Conceptual design of glass recycling machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Nasruldin, Hashim (2012) Implementation of single minute exchange die (SMED) technique to accelerate the mold changing time at sme company. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Hayyul, Sohaimi (2012) Development controller for 2 axis mechanism machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal, Mohd Azit (2012) Optimization of carbon dioxide laser cutting parameters. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Quyyum, Sohaimi (2012) Analysis and countermeasure to improve a low takt production item based on LPS evaluation at Hicom Teck See Sdn. Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Zaid, Mohamad Mohtar (2012) The effect of assist gas on the surface roughness for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mumtaz, Norman (2012) Study of cavity surface effect to the plastic flow. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

N

Nadirah, Ismail (2012) Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Najibah, Anuar (2012) The study on implementation of lean production system in front disc D54T line at Sapura Machining Corporation Sdn. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nik Zuraida, Imran Adly (2012) Honeycomb ribs design on overcoming part warping. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norlizaa, Mohamad (2012) Design and development of wind tunnel for contraction ratio effects to the velocity and boundary layer thickness. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norsyeeda, Ab Alim (2012) Study of machinability on drilling austenite stainless steel 316 L1 by solid cabide tool. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norul Husna, Ibrahim (2012) Fabrication of wind tunnel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Hidayah, Hashim (2012) Fabricating a simple fan system for small low speed wind tunnel and studying the parameter for frequency adjustment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Nadiah, Mohammad Alwudin (2012) The reduction of work in progress between process in strut production line of a manufacturing factory. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Suraini, Hashim (2012) Design of mini CNC machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Atiqah Syazwani, Kamarudin (2012) Landmark detection for vision based of autonomous guided vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Azimah, Othman (2012) A study on lean manufacturing implementation at metal products industry for small medium enterprises (SMEs). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Fateha, Abd Aziz (2012) A case study on implementation of just-in-time (JIT) production system in Malaysia automotive industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nuruzzaman, D. M. and Chowdhury, M. A. (2012) Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies , 4 (1). pp. 29-40. ISSN 2228-9860(print); 1906-9642(online). (Published)

P

Perwira Putra, Iskandar (2012) Design and develop new glass bottle recycling system in Kuantan community. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

R

Raja Ariffin, Raja Ghazilla and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Sakundarini, Novita and Gonzales, Julirose (2012) Product Recovery Oriented Approach For Fastener Selection During Conceptual Design. International Journal of Sustainable Design, 2 (1). pp. 64-82. ISSN 1743-8284 (Print); 1743-8292 (Online). (Published)

Rossi, Passarella and Zahari, Taha (2012) Lightweight Solar Vehicle Impact Analysis Using ABAQUS/EXPLICIT. Computer Engineering and Applications, 1 (2). pp. 85-96. ISSN 2252-4274 (Print); 2252-5459 (Online). (Published)

S

Samylingam, Lingenthiran (2012) Improve material handling system in Hirotako Acoustic Sdn.Bhd'��s : logistic department area. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siew Tien, Lau (2012) Improvement of quality performance in SME's manufacturing industries using statistical process control (SPC). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Hazlina, Mokhtar (2012) Development of statistical process control (SPC) matlab-based software for automotive industries application. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Mahfuzah, Mohamad (2012) Improvement of take-away water cup design by using concurrent engineering approach. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Raihana, Shahadan (2012) Survey of project management methods which employed by fixed position layout in Malaysia. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

T

Tuan Abdul Hadi, Tuan Jusoh (2012) Design suitable punch or die to overcome springback on u-bending. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Z

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) A Comparison of Two Approaches for Collision Avoidance of an Automated Guided Vehicle Using Monocular Vision. Applied Mechanics and Materials, 145. pp. 547-551. ISSN 1662-7482. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) Landmark Navigation in Low Illumination Using Omnidirectional Camera. In: The 9th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI 2012) , 26-28 November 2012 , Daejeon Convention Center (DCC), Daejeon, Korea. . (Unpublished) (Unpublished)

Zahari, Taha and Jessnor Arif, Mat Jizat and Ismayuzri, Ishak (2012) Bar Code Detection Using Omnidirectional Vision for Automated Guided Vehicle Navigation. In: International Conference for Automatic Control and Artificial Intelligence 2012 , 24-27 March 2012 , Xiamen, China. . (Unpublished) (Unpublished)

Zahari, Taha and Sarkawt, Rostam (2012) A hybrid fuzzy AHP-PROMETHEE decision support system for machine tool selection in flexible manufacturing cell. Journal of Intelligent Manufacturing, 23 (6). pp. 2137-2149. ISSN 1572-8145. (Published)

Zuraifah, Kamarudin (2012) Machinability study on drilling austenite stainless steel 316l1 using minimum quantity lubrication (MQL) on surface roughness. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.