Items where Division is "Faculty of Manufacturing Engineering" and Year is 2015

Article

A. K., Prasada Rao (2015) Nucleation in Al Alloys Processed By MCDC Casting. Journal of Materials Engineering and Performance, 24 (6). pp. 2219-2224. ISSN 1544-1024. (Published)

A. K., Prasada Rao and S. L., Pramod and B. S., Murty and Srinivasa R., Bakshi (2015) Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite. Materials and Design, 78. pp. 85-94. ISSN 0261-3069. (Published)

Abdul Syakir, Abdul Mubin and Norhafizan, Ahmad and Azuddin, Mamat and Zahari, Taha and Iskandar, Hasanuddin (2015) CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations. Advances in Mechanical Engineering, 7 (1). pp. 1-10. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

Abdulrazak, Lway Faisal and Oudah, Ali A. (2015) Interference Mitigation Technique Through Shielding and Antenna Discrimination. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 10 (3). pp. 343-352. ISSN 1975-0080. (Published)

Ahamed, Nizam Uddin and Ahmed, Nasim and Alqahtani, Mahdi and Altwijri, Omar and Ahmad, Badlishah and Sundaraj, Kenneth (2015) Investigation of the EMG-Time Relationship of the Biceps Brachii Muscle During Contractions. Journal of Physical Therapy Science, 27 (1). pp. 39-40. ISSN 0915-5287. (Published)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Al-Mamun, Md. Abdullah and Rahman, S. A. M. Matiur and Ahmed, Nasim and Hassnawi, L. A. (2015) Automatic Car Parking and Controlling System Using Programmable Logic Controller (PLC). International Journal of Applied Engineering Research (IJAER), 10 (1). pp. 69-75. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Alqahtani, Mahdi and Altwijri, Omar and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2015) Gender Effects in Surface Electromyographic Activity of the Biceps Brachii Muscle during Prolonged Isometric Contraction. Procedia Computer Science, 61. pp. 448-453. ISSN 1877-0509. (Published)

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2015) Spectroscopic Studies of Magnetron Sputtering Plasma Discharge in Cu/O2/Ar Mixture for Copper Oxide Thin Film Fabrication. Jurnal Teknologi (Sciences and Engineering), 73 (1). pp. 11-15. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ali, Md. Asraf and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Islam, Md. Anamul and Sundaraj, Sebastian (2015) Muscle Fatigue in the Three Heads of the Triceps Brachii During a Controlled Forceful Hand Grip Task with Full Elbow Extension Using Surface Electromyography. Journal of Human Kinetics, 46. pp. 69-76. ISSN 1899-7562. (Published)

Amir, Azizi (2015) Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance. Procedia Manufacturing, 2. pp. 186-190. ISSN 2351-9789. (Published)

Amir, Azizi and Aikhuele, Daniel O. and Souleman, Fathi S. (2015) A Fuzzy TOPSIS Model to Rank Automotive Suppliers. Procedia Manufacturing, 2. pp. 159-164. ISSN 2351-9789. (Published)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Gesang, Nugroho and Zahari, Taha and Tedy, Setya Nugraha and Hatyo, Hadsanggeni (2015) Development of a Fixed Wing Unmanned Aerial Vehicle (UAV) for Disaster Area Monitoring and Mapping. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 6 (2). pp. 83-88. ISSN 2087-3379. (Published)

Iqbal, A. K. M. Parvez and Zabri, N. H. M. and Sahari, K. S. M. and Iqbal, AKM Asif and Ishak, Aris (2015) Process Involved in Designing of an Intelligent Additional Track Mechanism Tracked Vehicle for Swamp Peat Terrain. Indian Journal of Science and Technology, 8 (17). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2015) Study On Low-Cycle Fatigue Behavior Of Cast Hybrid Metal Matrix Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2504-2514. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Iqbal, AKM Asif and Chen, Songchun and Arai, Yoshio and Araki, Wakako (2015) Study on Stress Evolution in SiC Particles During Crack Propagation in Cast Hybrid Metal Matrix. Engineering Failure Analysis, 52. pp. 109-115. ISSN 1350-6307. (Published)

Iskandar, Hasanuddin and Zahari, Taha and Nukman, Y. and Norhafizan, Ahmad and Raja Ariffin, Raja Ghazilla and Tuan Mohammad Yusoff Shah, Tuan Ya (2015) Investigation of the Head Impact Power of a Sepak Takraw Ball on Sepak Takraw Players. Movement, Health & Exercise (MoHE), 4 (2). pp. 45-56. ISSN 2231-9409. (Published)

Islam, Anamul and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Md. Asraf, Ali (2015) Analysis of Crosstalk in the Mechanomyographic Signals Generated by Forearm Muscles During Different Wrist Postures. Muscle & Nerve, 51 (6). pp. 899-906. ISSN 1097-4598. (Published)

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) A novel multi-state gravitational search algorithm for discrete optimization problems. International Journal of Simulation: Systems, Science & Technology (IJSSST), 16 (6). 15.1-15.8. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Izzeldin, I. Mohd and Amran, Abdul Hadi and Md Rizal, Othman and Oudah, Ali A. (2015) Performance Analysis of Seamless Vertical Handover in 4G Networks. Journal of Theoretical and Applied Information Technology, 79 (2). pp. 215-224. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Kartina, Johan (2015) Perception of Students Towards Lecturers Teaching Engineering Courses with Industry Experience: A Case Study in Malaysia Technical University. Procedia Social and Behavioral Sciences, 195. pp. 925-931. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

M. A., Hassan and Amir Radzi, Ab. Ghani and Zahari, Taha and M. A., Hamdi (2015) Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base. Applied Mathematics & Information Sciences, 9. pp. 51-58. ISSN 1935-0090. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2015) End Mill Tools Integration in CNC Machining for Rapid Manufacturing Processes: Simulation Studies. Production & Manufacturing Research, 3 (1). pp. 274-288. ISSN 2169-3277. (Published)

Marini, C. D. and Fatchurrohman, Nanang (2015) A Review On The Fabrication Techniques Of Aluminium Matrix Nanocomposites. Jurnal Teknologi (Sciences and Engineering), 74 (10). pp. 103-109. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mebrahitom, A. and O., Mamat and F., Ahmad and A. K., Prasada Rao (2015) Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites. Journal of Advanced Ceramics, 4 (3). ISSN 2226-4108. (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2015) Finite Element Analysis of Soccer Heading. Procedia Engineering, 112. pp. 46-51. ISSN 1877-7058. (Published)

Mohd Zaidi, Sidek and Mohd Syahidan, Kamarudin and Mohamad Nafis, Jamaluddin (2015) Simulation and Fabrication of Open-Type Boiler of Fish Cracker Production Line. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Muhammad Adib , Shaharun and A. R., Yusoff (2015) Effects of Irregular Tool Geometry and Machining Process Parameters on the Wavelength Performance of Process Damping in Machining Titanium Alloy at Low Cutting Speed. The International Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Noraini, Mohd Razali (2015) An Efficient Genetic Algorithm for Large Scale Vehicle Routing Problem Subject to Precedence Constraints. Procedia - Social and Behavioral Sciences, 195. pp. 1922-1931. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Nurrina, Rosli and Amagai, Kenji (2015) Study of Liquid Film Flow Structure on Inclined Wall Using Photochromic Dye Marking Method. Journal of JSEM, 15 (S. I.). s21-s25. ISSN 1346-4930. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Debnath, U. K. and Islam, M. M. (2015) Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle. Advances in Tribology, 2015. pp. 1-31. ISSN 1687-5915. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman and Basri, S. and Nur Amira Mardian, Zulkifli (2015) Fabrication and Mechanical Properties of Aluminium-Aluminium Oxide Metal Matrix Composites. International Journal of Mechanical and Mechatronics Engineering (IJMME), 15 (6). pp. 68-75. ISSN 2227-2771 (Print); 2077-124X (Online). (Published)

Walinjkar, Devavrat and A. K., Prasada Rao (2015) C-DC and MC-DC Casting of Al-alloys-A Comsol Approach. Materials Letters, 161. pp. 698-700. ISSN 0167-577X. (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and Deboucha, Abdelhakim and Ahamed, Nizam Uddin and Anwar, P. P. A. Majeed and Wong, Yashim (2015) IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing. Biomedical Research (India), 26 (4). pp. 616-620. ISSN 0970-938X . (Published)

Zahari, Taha and Kun, Liu and Wang, Hongrui and Xiao, Jinzhuang (2015) Analysis of Human Standing Balance by Largest Lyapunov Exponent. Computational Intelligence and Neuroscience, 2015. pp. 1-10. ISSN 1687-5265 (print); 1687-5273 (online). (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Iskandar, Hasanuddin (2015) Analytical Modelling of Soccer Heading. Sadhana, 40 (5). pp. 1567-1578. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Book Chapter

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Faiz, Mohd Turan and Badrul, Omar (2015) Application of Integrated Fuzzy-AHP for Design Concept Evaluation: A Case Study on Mold Design Selection. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 101-113. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

Bulletin

Zuryaty, Zol (2015) Pasukan Elixir Racing sekolah kluster harumkan UMP. CREATE . p. 39. ISSN 1823-7487

Zuryaty, Zol (2015) UMP-ITB anjur persidangan antarabangsa iMEC dan APSCOMS. CREATE . p. 13. ISSN 1823-7487

Conference or Workshop Item

A. R., Yusoff and Fitriyanti, Arsyad (2015) Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools. In: International Manufacturing Engineering Conference 2015 , 12-14 November 2015 , Kuala Lumpur. pp. 1-8., 3 (1). ISSN 2289-697X (Unpublished) (Unpublished)

Ahamed, Nizam Uddin and Altwijri, Omar and Rahaman, S. A. M. Matiur and Alqahtani, Mahdi and Ahmed, Nasim and Sundaraj, Kenneth (2015) Relation Between EMG Signal Activation and Time Lags Using Feature Analysis During Dynamic Contraction. In: 2nd IEEE International Conference on Advanced Informatics: Concepts, Theory and Applications (ICAICTA 2015) , 19-22 August 2015 , Chonburi, Thailand. pp. 1-4., 2015. ISSN 978-1-4673-8142-0 ISBN 978-1-4673-8142-0 (Published)

Ahamed, Nizam Uddin and Rahman, Matiur and Alqahtani, Mahdi and Altwijri, Omar and Sundaraj, Kenneth and Ahmed, Nasim (2015) Relationship between EMG Activity and Endurance Time in the Biceps Brachii Muscle during Isokinetic Contraction. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014) , 23-25 November 2014 , Copthorne Hotel, Cameron Highland, Malaysia. pp. 1-7.. (In Press / Online First) (In Press / Online First)

Amir, Azizi (2015) An Integrated Framework of Critical Techniques in Implementation of Total Quality Management. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-7.. ISBN 978-1-4799-6064-4 (Published)

Amir, Azizi (2015) Relationships between Total Quality Management Critical Techniques in Automotive Industry. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-8.. (Published)

Amir, Azizi and Daniel, Osezua Aikhuele (2015) An Integrated Model of Kano and Quality Function Deployment for Evaluation of Lean Production Tools in Assembly Environment. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-6.. (Published)

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2015) Effect of Multiple Jet Passes Treatment in Waterjet Peening on Fatigue Performance. In: 1st International Conference on Applied Surface Science (ICASS 2015) , 27-30 July 2015 , Shanghai, China. pp. 1-20.. (Unpublished) (Unpublished)

Faiz, Mohd Turan (2015) Criteria Assessment in Design Evaluation for Product Development using Integrated Fuzzy-TOPSIS. In: 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (ECODESIGN 2015) , 2-4 December 2015 , Tokyo, Japan. pp. 1-7.. (Unpublished) (Unpublished)

Fatchurrohman, Nanang and Marini, C. D. and Suraya, Sulaiman and Iqbal, AKM Asif (2015) Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) Ergonomics Risk Awareness in Associated with Employee’s Learning and Experiences. In: International Symposium on Advancement In Ergonomic and Safety 2015(ERGOSYM2015) , 30 November - 1 Decemcer 2015 , UniMAP, Perlis.. . (Unpublished) (Unpublished)

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) An Investigation Into Low Ergonomic Risk Awareness Among Staffs at Early Product Development Phase in Malaysia Automotive Industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference & 3rd Asia Pacific Conference Of Manufacturing Systems 2015 , 12-14 November 2015 , Swiss Garden Hotel, Kuala Lumpur. . (Unpublished) (Unpublished)

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished) (Unpublished)

Ismed, Iskandar and Yudi Satria, Gondokaryono (2015) Competing Risk Models in Reliability Systems, a Weibull Distribution Model with Bayesian Analysis Approach. In: Joint Conference Imec-Apcoms 2015 Universiti Malaysia Pahang (Ump) and Institut Teknologi Bandung (ITB), Indonesia , 12-14 November 2015 , Kuala Lumpur. pp. 1-8.. (Unpublished) (Unpublished)

M. Nafis, O. Z. and Case, Keith and Watts, D. M. (2015) Cutting Orientations for Non-Complex Parts in 4th Axis Machining. In: International Manufacturing Engineering Conference 2015 . pp. 1-7.. (Unpublished) (Unpublished)

M. S. A., Rahim and I., Ismail (2015) Review of Magnetorheological Fluids and Nanofluids Thermal Behaviour. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012040). ISSN 1757-899X (Published)

Mohd Syahidan, Kamarudin and Mohd Zaidi, Sidek (2015) Line Balancing Analysis of a Multi-Products Processing with a Single Type of Supply. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 25-30.. ISBN 978-967-394-255-8 (Published)

Ng Liang, Shing and Corbin, Champion (2015) The One Universal Graph – a Free and Open Graph Database. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Ng Liang, Shing and J. S., Sak and R., Dhinesh (2015) Low Cost Night Vision System for Intruder Detection. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Ng Liang, Shing and K. O., Tan and T. H., Clement and T. H. , Lai and S. K., Ng (2015) Open Source Hardware and Software Platform for Robotics and Artificial Intelligence. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Nurrina, Rosli and Kenji, Amagai (2015) Thickness Measurement of Liquid Sheet Spay Before Breakup. In: The 10th International Symposium On Advanced Science And Technology In Experimental Mechanics , 1-4 Nov 2015 , Matsue. . (Unpublished) (Unpublished)

Nurul Aida, Amir Khatif and Mohamad Aliff Kamil, Awang Kecik and Mohd Ali Hanafiah, Shaharudin and A. K., Prasada Rao and Noor Mazni, Ismail (2015) The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

S., Aid and I., Ismail and S. A., Wahid and M. S., A. Rahim (2015) Magnetorheological Fluid Materials Properties, Rheological Behaviour and Device Design in Valve Application. In: 2nd International Manufacturing Engineering Conference (IMEC2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff (2015) Integrated chatter avoidance and minimum quantity lubrication conditions for chatter vibration problem in the machining process. In: Advanced Manufacturing Processing Technology(AMPT2015) , 20-21 November 2015 , Madrid, Spain. p. 1.. (Submitted) (Submitted)

Yusof, Hashim and Zahari, Taha (2015) Partial Least Square Method For Modelling Ergonomic Risks Factors On Express Bus Accidents In The East Coast Of Peninsular West Malaysia. In: AIP Conference Proceeding, 166, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 166.. (Published)

Zahari, Taha and Hwa, Jen Yap and Mohammad Syawaludin Syafiq, Hassan and Wee, Kian Yeo (2015) Digital Analysis of Badminton Athlete Motion. In: International Conference on Movement, Health and Exercise (MOHE 2015) , 5-7 Oct 2015 , Penang. . (Unpublished) (Unpublished)

Zahari, Taha and M. Ali, Hanafiah (2015) Estimation of Thermal Contact Conductance Between Blank and Tool Surface in Hot Stamping Process. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Newspaper

Zuryaty, Zol (2015) Pasukan Elixir Racing sekolah kluster harumkan UMP. UMP News .

Thesis

Awanis, Romli (2015) Integrated eco-design decision making for sustainable product design. PhD thesis, Cardiff University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Shafiza Afzan, Sharif (2015) Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nur Sakinah, Jamaludin (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Basri, Shahnor).

Undergraduates Project Papers

Abdul Rashid, Marjuki (2015) Qualitative assessment of structural strength for thermoformed honeycomb sandwiched structures. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aina Nadia Aida, Mohd Latif (2015) Improvement of availability rate of overall equipment effectiveness (OEE) for CNC winding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Arsyad, Fitriyanti (2015) Evaluation of surface roughness and power consumption in machining FCD 450 using coated and uncoated irregular milling tools. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chan, Sooi Tat (2015) Fuzzy logic controlled solar module for driving three-phase induction motor. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chang, Jian Fei (2015) Design and development of smart car parking system using arduino and android. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Dhinesh, Ramotharan (2015) Unmanned aerial vehicle with night vision for tracking intruder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Farah Fazira, Kamaruzaman (2015) Fabrication & properties of aluminium-silicon carbide (A1/SiC) composite material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Filzah ‪Lina, Mohd Safeiee (2015) Football speed analysis and game analysis by using image processing. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Goh, Chin Guan (2015) Design and implementation of an automatic coin sorting and counting machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hazimah, Abdul Rahim (2015) Modelling and simulation of flexible production line for coil winding assembly. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Law, Jessica Ka Ing (2015) Analysis and countermeasure to improve machine efficiency by using overall equipment effectiveness (OEE) method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Jozaimi Izwan, Jalaluddin (2015) Aquarium pump drive by solar cell using maximum power point tracking (MPPT). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Afiq Naqiuddin, Kamarizan (2015) A signal processing of deep drilling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Azami Fitri, Ab Manan (2015) Android based dot-matrix led display scrolling text console. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Faiz, Ab. Rahim (2015) Remote temperature monitoring and analysis of thermoforming process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Firdaus, Azmi (2015) Application of six sigma model in production and quality of the stabiliser. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ng, Weng Kai (2015) Mobile robot simulator with jmonkeyengine (java base programming). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nik Ruqiyah, Nik Hassan (2015) Preparation of thermoplastic container via thermoforming process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurizzathanis, Mohamad Kusaseh (2015) Modeling and properties of glass fibre-reinforced nylon. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ooi, Choon Kheng (2015) Development of a computerized inventory management system (IMS) for industry application. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sak, Jenn Shin (2015) Night vision camera system for intruder detection in indoor and outdoor environment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Aisyah, Saahri (2015) Design and fabrication of an automatic fish feeding system for home aquarium. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan, Kee Kian (2015) PCB drilling using arduino. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan, Kit Oon (2015) Android mobile gripping robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan, Yew Boon (2015) Electrical signal activity on upper limb muscle during mechanical load carrying : a study on emg-angle relationship. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wan Nurul Syahirah, Wan Lanang (2015) Surface EMG (Electrical Signal) based fatigue analysis during repetitive work. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wong, Choon Chen (2015) Implementation of assembly sequence by arduino and monitoring system using ni myrio. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.