Items where Division is "Faculty of Manufacturing Engineering" and Year is 2019

A

A. H., Sufian and A. S., Jamaludin and A. N., Ibrahim and M. N., Mhd Razali and M. S., Osman and S. B., Hamzah (2019) Tyre Safety Performance on Asphalt Pavement in Malaysia Climate - Analysis through Finite Element Method. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 236-245. ISSN 2600-8092(Printed); 2550-2239(Online). (Published)

Abdalla, Ahmed N. and Tao, Hai and Bagaber, Salem Abdullah and Obed M., Ali and Kamil, Mohammed and Ma, Xiao and Awad, Omar I. (2019) Prediction of emissions and performance of a gasoline engine running with fusel oil–gasoline blends using response surface methodology. Fuel, 253. pp. 1-14. ISSN 0016-2361. (Published)

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria (2019) Torque control analysis of platform based end effector ankle foot orthosis for rehabilitation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 35-38. ISSN 2637-0883. (Published)

Abu Hannifa, Abdullah and Zulhelmi, Ismail and Anis Sakinah, Zainal Abidin and Kamal, Yusoh (2019) Green sonochemical synthesis of few-layer graphene in instant coffee. Materials Chemistry and Physics, 222. pp. 11-19. ISSN 0254-0584. (Published)

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Ahmad Najmuddin, Ibrahim (2019) Automated Face Detection Using Skin Color Segmentation and Viola-Jones Algorithm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 58-63. ISSN 2637-0883. (Published)

Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir (2019) Superposition of dual image fusion with improved dehazing methods for high visibility of underwater image. In: The 17th IEEE International Conference On Pervasive Intelligence And Computing (PICOM 2019) , 3 - 9 Ogos 2019 , Fukoaka, Japan. pp. 1-6.. ISBN 978-1-7281-3025-5 (Print); 978-1-7281-3024-8 (Online) (Published)

Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir and Muhammad Aizzat, Zakaria and Ahmad Najmuddin, Ibrahim (2019) Modification of Lab color model for minimizing blue-green illumination of underwater vision system. In: 25th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2018 , 3 January 2019 . pp. 1-7.. ISBN 978-153867544-1 (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Akira, Hosokawa and Furumoto, Tatsuaki and Mohd Shahril, Osman (2019) Bold approach in finite element simulation on minimum quantity lubrication effect during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 33-41. ISSN 2636-9575. (Published)

Aisha, Muhammad and Ali, Mohammed A. H. and Haruna, Shanono Ibrahim (2019) Structural analysis of a diesel engine connecting rod using four different materials. In: 1st International Conference On Mechatronics, Automation And Cyber-Physical Computer Systems (MAC-2019) , 7 March 2019 , Federal University of Technology Owrrie Nigeria. pp. 1-8.. (Unpublished) (Unpublished)

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Wear and mechanical characterization of Mg-Gr self-lubricating composite fabricated by mechanical alloying. Journal of Magnesium and Alloys, 7 (2). pp. 283-290. ISSN 2213-9567. (Published)

Ali, Mohammed A. H. and Mailah, Musa (2019) A simulation and experimental study on wheeled mobile robot path control in road roundabout environment. International Journal of Advanced Robotic Systems, 16 (2). pp. 1-17. ISSN 1729-8806. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and A. Z., Hishamudin (2019) Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018) , 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012045). ISSN 1742-6596 (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Hiroyuki, Sasahara (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526 (Print); 1879-1786 (Online). (In Press / Online First) (In Press / Online First)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X. (Published)

B

Badaruddin, Muhammad and Mohd Saberi, Mohamad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Mohd Ibrahim, Shapiai and Mohd Falfazli, Mat Jusof (2019) Oppositional learning prediction operator with jumping rate for simulated kalman filter. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-7.. ISBN 978-153868125-1 (Published)

Bathrinath, S. and Charan, Vadakapur Sai and Ponnambalam, S. G. and Saravanasankar, S. (2019) Identification and evaluation of criteria of agile manufacturing using dematel: a case from an indian metal fabrication industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 61-74. ISSN 2636-9575. (Published)

Bathrinath, S. and Rahul, K. and Pradeep, J. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Evaluation of influence of principles involved in industry 4.0 over coal industries using TISM. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 244-245. ISBN 9781522590781

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Analysis of risk factors for surgical site infection: A case research in an Orthopedic Hospital (Healthcare Industry). Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 98-113. ISSN 2636-9575. (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) A Fuzzy Decision-Making Trial and Evaluation Laboratory approach to analyse risk factors related to environmental health and safety aspects in the healthcare industry. Sadhana, 44 (55). pp. 1-15. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

C

Chak, Wen Zheng and Abu, Mohd Yazid (2019) Application of Activity Based Costing for Palm Oil Plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 1-14. ISSN 2636-9575. (Published)

Chia, Yun Qi and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Ahmad Redza, Ahmad Mokhtar and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2019) Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 42-50. ISSN 2636-9575. (Published)

F

Fatkhurrahman, Manani and Siti Zubaidah, Ismail (2019) Product-service system inventory control for Malaysian Palm Oil Industry: A case study utilizing IDEF0 modelling. iMEC-APCOMS 2019. pp. 153-158. ISSN 978-981-15-0949-0. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

I

I. I., Azmi and S. N. A. M., Zaini and Mohd Yazid, Abu (2019) Application of Mahalanobis-Taguchi system in palm oil plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 1-8. ISSN 2636-9575. (Published)

K

Kamil Zakwan, Mohd Azmi and Zuwairie, Ibrahim and Pebrianti, Dwi and Mohd Falfazli, Mat Jusof and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz (2019) Enhancing simulated kalman filter algorithm using current optimum opposition-based learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 1-13. ISSN 2637-0883. (Published)

L

Lazarus, Kelvin and Nurul Hazlina, Noordin and Zuwairie, Ibrahim (2019) An enhanced simulated kalman filter algorithm and its application in adaptive beamforming. In: IEEE International RF and Microwave Conference, RFM 2018 , 17 - 19 Disember 2018 , Park Royal Penang. pp. 1-4.. (Published)

Lee, Wei Loon and Sreekar Reddy, S. and A. K., Prasada Rao (2019) CFD simulation of direct chill casting process of magnesium alloy billets. Journal of Manufacturing Processes, 45. pp. 447-454. ISSN 1526-6125. (Published)

Lemma, Tamiru Alemu and Noraimi, Omar and Gebremariam, M.A. and Shazaib, Ahsan (2019) Anti-friction bearing malfunction detection and diagnostics using hybrid approach. In: Lecture Notes in Mechanical Engineering; 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018 , 14 - 15 November 2018 , Melaka. pp. 117-131.. ISSN 2195-4356 ISBN 978-981138296-3 (Published)

Leong, W. D. and Lam, H. L. and Lim, C. H. and Tan, C. P. and Ponnambalam, S. G. (2019) Outcome based approach to lean and green manufacturing processing. Chemical Engineering Transactions, 72. pp. 361-366. ISSN 2283-9216. (Published)

Li, Zixiang and Janardhanan, Mukund Nilakantan and Tang, Qiuhua and Ponnambalam, S. G. (2019) Model and metaheuristics for robotic two-sided assembly line balancing problems with setup times. Swarm and Evolutionary Computation, 50 (100567). ISSN 2210-6502. (Published)

M

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981 (Published)

Mohamad, Hafiz and M. Nafis, O. Z. (2019) Investigation of the correlation between radial depth of cut (RDOC) and axial depth of cut (ADOC) using NX CAM system: simulation studies. In: Engineering Applications Of Artificial Intelligence Conference 2018 (EAAIC 2018) , 2-6 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-6., 255. ISSN 2261-236X (Published)

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single hole direct injector simulation validation and parametric sensitivity study. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 788 (0120635th). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohd Azraai, Mohd Razman and Susto, Gian Antonio and Cenedese, Angelo and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Ahmad Shahrizan, Abdul Ghani and Faeiz Azizi, Adnan and Khairul Muttaqin, Ismail and Zahari, Taha and Mukai, Yukinori (2019) Hunger classification of Lates calcarifer by means of an automated feeder and image processing. Computers and Electronics in Agriculture, 163. pp. 1-8. ISSN 0168-1699. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine and porcine bone. In: 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO , 13-14 June 2019 , Sheffield; United Kingdom. pp. 411-414., 82. ISSN 2212-8271 (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling. Applied Thermal Engineering, 157. pp. 113583-113594. ISSN 1359-4311. (Published)

Mohd Mawardi, Saari and Nazatul Shareena, Suhaimi and Mohd Herwan, Sulaiman and Nurul Akmal, Che Lah and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2019) Influence of viscosity on dynamic magnetization of thermally blocked iron oxide nanoparticles characterized by a sensitive AC magnetometer. Journal of Superconductivity and Novel Magnetism. pp. 1-8. ISSN 1557-1947. (Published)

Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) A review on the integration of mahalanobis-taguchi system and time-driven activity-based costing on production environment. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Muhammad Ihsan, Abdul Latiff (2019) Experimental analysis and pressureless sintering of powder processed functionally graded nickel alumina plates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Mohd Azraai, M. Razman and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu and Mohd Hasnun Ariff, Hassan and A. P. P., Abdul Majeed (2019) The classification of skateboarding trick manoeuvres through the integration of image processing techniques and machine learning. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019) , 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-7.. (Unpublished) (Unpublished)

Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and Mohd Hasnun Ariff, Hassan and Mohd Azraai, Mohd Razman (2019) Technical and tactical performance indicators discriminating winning and losing team in elite Asian beach soccer tournament. PLoS ONE, 14 (6). pp. 1-10. ISSN 1932-6203. (Published)

Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Zahari, Taha (2019) A machine learning approach of predicting high potential archers by means of physical fitness indicators. PLoS ONE, 14 (1). pp. 1-12. ISSN 1932-6203. (Published)

N

N. A., Azlan and Nafrizuan, Mat Yahya (2019) Modified adaptive bats sonar algorithm with doppler effect mechanism for solving single objective unconstrained optimization problems. In: 15th IEEE Colloquium On Signal Processing And Its Application (CSPA2019) , 8-9 March 2019 , Penang, Malaysia. pp. 27-30.. ISBN 978-1-5386-7563-2 (Published)

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

Nagahiro, R. and Nurrina, Rosli and Hangai, Y. and Yano, A. and Amagai, Kenji (2019) Uniform Heating Model Analysis for the Formation Process of Aluminium Foam by Spot-Type Halogen Lamp. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7170-7180. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) Application of mahalanobis-taguchi system on electrical & electronic industry. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Nik Nurul Husna, Muhmed Razali (2019) Hybrid energy harvesting of piezoelectric and electromagnetic using vibration excitation of bimorph cantilever beam. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman and Noraini, Mohd Razali and Suriati, Ghazali (2019) The effect of MAPE compatibilizer agent on the tensile strength of recycled PET/HDPE plastic composite. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 484-489.. ISBN 978-981-15-0950-6 (Published)

Nor Azlina, Ab. Aziz and Marizan, Mubin and Zuwairie, Ibrahim and Norrima, Mokhtar and Nor Hidayati, Abdul Aziz and Mohd Ibrahim, Shapiai (2019) A fitness-based adaptive synchronous-asynchronous switching in simulated kalman filter optimizer. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-5.. ISBN 978-153868125-1 (Published)

Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim and Kamarulzaman, Ab Aziz and Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter optimization algorithm for maximization of wireless sensor networks coverage. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-5.. ISBN 978-153868125-1 (Published)

Norainaa, Elias and Nafrizuan, Mat Yahya (2019) Comparison of DC motor position control simulation using MABSA-FLC and PSO-FLC. In: 2019 IEEE 15th International Colloquium on Signal Processing and its Applications, CSPA 2019 , 8-9 March 2019 , Penang, Malaysia. pp. 39-42.. ISBN 978-153867563-2 (Published)

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite. Russian Journal of Non-Ferrous Metals, 60 (3). pp. 274-281. ISSN 1934-970X (Online). (Published)

Nur Iffah, Mohamed Azmi and Nafrizuan, Mat Yahya and Ho, Jun Fu and Wan Azhar, Wan Yusoff (2019) Optimization of the PID-PD parameters of the overhead crane control system by using PSO algorithm. In: MATEC Web of Conferences: Engineering Application of Artificial Intelligence Conference (EAAIC 2018) , 3-5 December 2018 , Kota Kinabalu, Sabah, Malaysia. pp. 1-8., 255 (04001). ISSN 2261-236X (Published)

Nuramirah, Che Lah and Noor Mazni, Ismail (2019) Empty fruit bunch (EFB) fibers as reinforcement in polypropylene. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 84-92. ISSN 2636-9575. (Published)

Nurul Afiqah, Zainal and A. R., Yusoff and Ajisman, Apen (2019) Integrated cooling systems and maximum power point tracking of fuzzy logic controller for improving photovoltaic performances. Measurement, 131. pp. 100-108. ISSN 0263-2241. (Published)

Nurul Akmal, Che Lah and Aqilah, Kamaruzaman (2019) The optical quantification measurement on aggregated aqueous ZnO nanostructures upon exposure to tannic acid. Materials Research Express, 6 (12). ISSN 2053-1591. (Published)

Nurul Akmal, Che Lah and Nurshuhada, Mohamad and Mohd Mawardi, Saari and Mohd Rafie, Johan (2019) Nanoscopic tannic acid - ZnO colloid: Low temperature synthesis and the influence of pH on the aggregates. Materials Research Express, 6 (6). pp. 1-14. ISSN 2053-1591. (Published)

Nurul Akmal, Che Lah and Trigueros, Sonia (2019) Synthesis and modelling of the mechanical properties of Ag, Au and Cu nanowires. Science and Technology of Advanced Materials, 20. pp. 1-63. ISSN 1468-6996 (Print); 1878-5514 (Online). (Published)

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee (2019) A Comparative Study of Product Costing by Using Activity-Based Costing (ABC) and Time-Driven Activity-Based Costing (TDABC) Method. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 171-178.. ISBN 978-981-15-0950-6 (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853 (Published)

O

Oktaviandri, Muchamad and Kah, Keat Foong (2019) Design and development of visitor management system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 73-79. ISSN 2637-0883. (Published)

Ooi, Peng Toon and Muhammad Aizzat, Zakaria and Ahmad Fakhri, Ab. Nasir and A. P. P., Abdul Majeed and Chung, Young Tan and Leonard Chong, Yew Ng (2019) Autonomous tomato harvesting robotic system in greenhouses: deep learning classification. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 80-86. ISSN 2637-0883. (Published)

R

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Anthropometry correlation towards archery performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 29-35. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Bio-Physiological Indicators in Evaluating Archery Performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 13-20. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Concluding remarks. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, p. 45. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Machine Learning in Sports: Identifying Potential Archers. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-9. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psycho-fitness parameters in the identification of high-potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 37-44. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psychological variables in ascertaining potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 21-27. ISBN 978-981-13-2592-2

Radhiyah, Abd Aziz and Rajan, Jose (2019) Modification of layered structure in Manganese oxide nanorods for electrode of supercapacitor. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 455-460.. ISBN 978-981-15-0950-6 (Published)

Rajaram, R. and Jawahar, N. and Ponnambalam, S. G. and Mukund Nilakantan, Janardhanan (2019) Multi objective optimization of economic and environmental aspects of a three-Echelon Supply Chain. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 127-128. ISBN 9781522590781

Rinei, Arifin and Siti Zubaidah, Ismail (2019) Investigation of inventory record accuracy in product-service system. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 93-105. ISSN 2636-9575. (Published)

S

S., Sharif and A. S., Ramli and A. Y. M., Said and Z., Karim and E. A., Rahim and Amiril Sahab, Abdul Sani (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V. International Journal of Integrated Engineering, 11 (4). pp. 159-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

S. K., Lim and N. Z., Mohamad and A. R., Yusoff (2019) Experimental investigation of recycled machining coolant mixed with nanofluids based Al2O3. In: International Conference On Recent Advances In Industrial Engineering And Manufacturing (ICRAIEM 2018) , 12 - 13 Disember 2018 , Penang. pp. 1-6., 530 (012002). ISSN 17578981 (Published)

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing , 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X (Published)

Shin, Teh Muy and Asrul, Adam and Amar Faiz, Zainal Abidin (2019) A comparative study of PSO, GSA and SCA in parameters optimization of surface grinding process. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1117-1127. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Siti Rohaida, Mohamed and Saiful Anwar, Che Ghani and Sawangsri, Worapong (2019) Mechanical properties of additive manufactured CoCrMo meta-biomaterials for load bearing implants. Jurnal Tribologi, 21. pp. 93-107. ISSN 2289-7232. (Published)

Siti Suhaila, Sabarudin and Ahmad Najmuddin, Ibrahim and Ahmad Shahir, Jamaludin and Fukuoka, Yasuhiro (2019) Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Soni, Ruma Arora and Sudhakar, K. and Rana, R. S. (2019) Comparative study on the growth performance of Spirulina platensis on modifying culture media. Energy Reports, 5. pp. 327-336. ISSN 2352-4847. (Published)

Sri Nur Areena, Mohd Zaini and Abu, Mohd Yazid (2019) A Review on Time-Driven Activity-Based Costing System in Various Sectors. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 15-22. ISSN 2636-9575. (Published)

Suparmaniam, Madan Varmma and A. R., Yusoff (2019) Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 21-26. ISSN 2637-0883. (Published)

T

Tasiransurini, Ab Rahman and Mohd Ibrahim, Shapiai and Zuwairie, Ibrahim and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz and Mohd Saberi, Mohamad (2019) Evaluation of Different Horizon Lengths in Single-agent Finite Impulse Response Optimizer. In: IEEE International Conference on Computer and Information Sciences (ICCIS 2019) , 3-4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-7.. ISBN 978-1-5386-8125-1 (Published)

V

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2019) Optimization of process parameters of injection moldings for plastic pallets manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 75-83. ISSN 2636-9575. (Published)

Z

Z. F. Z., Abidin and T., Jing Hung and M. Nafis, O. Z. (2019) Portable non-contact surface roughness measuring device. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012074). ISSN 1757-899X (Published)

Zulhelmi, Ismail (2019) Layer-layer assembly of water-based graphene for facile fabrication of sensitive strain gauges on paper. Cellulose, 26 (3). pp. 1417-1429. ISSN 1572-882X. (Published)