Items where Division is "Faculty of Manufacturing and Mechatronic Engineering Technology" and Year is 2020

Article

Abdo Salman, Abdulaziz and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The diagnosis of diabetic retinopathy by means of transfer learning and fine-tuned dense layer pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 68-72. ISSN 2637-0883. (Published)

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed and Mohamad Heerwan, Peeie (2020) Rain classification for autonomous vehicle navigation : A support vector machine approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 74-80. ISSN 2637-0883. (Published)

Abdul Rahim, Jalil and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Saiful Nizam, Tajuddin and Che Mohd Aizal, Che Mohd and Razam, Abd Latip and Mohammad Saiful Nizam, Ismail and Mohamad Nor Azizi, Shabudin and Wan Rusyidah, W. Rusik (2020) Intelligent classification of palm oil tree pollination using E-nose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 28-37. ISSN 2637-0883. (Published)

Abdullah, Z. and Mohamad Heerwan, Piee and I M, Izhar and M A, Zakaria (2020) Study the influence of distance in Artificial Potential Field (APF) for Autonomous Emergency Braking System (AEB) on longitudinal motion. IOP Conf. Series: Materials Science and Engineering, 1068 (012015). pp. 1-10. ISSN 1757-8981 (Print) 1757-899X (Online). (Published)

Ahmad Shahir, Jamaludin and Norazlianie, Sazali and Nor Hasrul Akhmal, Ngadiman (2020) An essential studies on tribology’s: a short review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 1-18. ISSN 2289-7879. (Published)

Aisha, Muhammad and Shanono, I. H. (2020) Finite element analysis of the heat transfer in a piston. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 45-51. ISSN 2636-9575. (Published)

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Dewan Muhammad, Nuruzzaman (2020) Mechanical and tribological characterization of self-lubricating Mg-SiC-Gr hybrid metal matrix composite (MMC) fabricated via mechanical alloying. Journal of Science: Advanced Materials and Devices, 5 (4). pp. 535-544. ISSN 2468-2179. (Published)

Amirul Asyraf, Abdul Manan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Nur Aiman, Shapiee (2020) Chili plant classification using transfer learning models through object detection. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 23-27. ISSN 2637-0883. (Published)

Areena, Zaini and Haryantie, Kamil and Mohd Yazid, Abu (2020) A case study on the un-used capacity assessment using time driven activity based costing for magnetic components. International Journal of Industrial Management (IJIM), 6 (1). pp. 18-39. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Arzielah Ashiqin, Alwi and Ahmad Najmuddin, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin (2020) Ball classification through object detection using deep learning for handball. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 49-54. ISSN 2637-0883. (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) A soft computing methodology to analyze sustainable risks in surgical cotton manufacturing companies. Sadhana, 45 (1). pp. 1-22. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) A soft computing methodology to analyze sustainable risks in surgical cotton manufacturing companies. Sadhana, 45 (1). pp. 1-2. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Cheng, Wai Kit and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The classification of heart murmurs: The identification of significant time domain features. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 36-43. ISSN 2637-0883. (Published)

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Muhammad Aizzat, Zakaria and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) Pallet-level classification using principal component analysis in ensemble learning model. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 23-27. ISSN 2637-0883. (Published)

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2020) University industry collaboration: The role of public universities within the Malaysian manufacturing landscape. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 36-44. ISSN 2636-9575. (Published)

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Anwar P. P., Abdul Majeed (2020) The diagnosis of diabetic retinopathy by means of transfer learning with conventional machine learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 62-67. ISSN 2637-0883. (Published)

Fatin Munirah, Nasarudin and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Saiful Nizam, Tajuddin and Che Mohd Aizal, Che Mohd (2020) Intelligent clasification sewage treatment plant (STP) using E-nose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 79-88. ISSN 2637-0883. (Published)

Filzah Lina, Mohd Safeiee and Siti Khadijah, M. Saad and Mohd Yazid, Abu (2020) A case study on the application of activity-based costing on the inductor component. Jurnal Teknik Industri, 10 (3). pp. 248-254. ISSN 2622-5131 (Online). (Published)

Iqbal, A. K. M. Asif and Sakib, Nazmus and Iqbal, A. K. M. Parvez and Nuruzzaman, D. M. (2020) Graphene-based nanocomposites and their fabrication, mechanical properties and applications. Materialia, 12 (100815). pp. 1-22. ISSN 2589-1529. (Published)

Jessnor Arif, Mat Jizat and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Yuen, Edmund (2020) Effect of image compression using fast fourier transformation and discrete wavelet transformation on transfer learning wafer defect image classification. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 16-22. ISSN 2637-0883. (Published)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2020) An evaluation of different fast fourier transform - transfer learning pipelines for the classification of wink-based EEG signals. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 1-7. ISSN 2637-0883. (Published)

K., Jun Li and Radhiyah, Abd Aziz (2020) Mini review of carbon based additive in machining lubricant. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 61-65. ISSN 2636-9575. (Published)

Kwai, Yang Sak and Ahmad Najmuddin, Ibrahim (2020) Field study of low-energy long-distance wireless communication for IoT application in remote areas. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 52-62. ISSN 2637-0883. (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

L. M., Keong and Ahmad Shahir, Jamaludin and M. N. M., Razali and A. N. S. Z., Abidin and M. R. M., Yasin (2020) Modelling of PID speed control based collision avoidance system. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 66-72. ISSN 2636-9575. (Published)

Lim, Weng Zhen and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Ahmad Fakhri, Ab. Nasir (2020) The condition based monitoring for bearing health. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 63-67. ISSN 2637-0883. (Published)

Mohamad Ilyas, Rizan and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2020) The classification of elbow extension and flexion: A feature selection investigation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 68-73. ISSN 2637-0883. (Published)

Mohd Hasnun Ariff, Hassan and Tan, F. Y. and M. A., Abdullah and N. Q., Radzuan and K. A., Abu Kassim (2020) Does a circular convex blind spot mirror increase the driver’s field of view? Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 44-49. ISSN 2550-2239. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) Gas Separation Performance through Carbon Membrane: The Effect of Polymer Composition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 177-187. ISSN 2289-7879. (Published)

Muhammad, Aisha and H. Ali, Mohammed A. and Shanono, Ibrahim Haruna (2020) Path planning methods for mobile robots: a systematic and bibliometric review. Journal of Electrical Engineering, 19 (3). pp. 14-34. ISSN 0128-4428. (Published)

Muhammad Fahmi Izuwan, Samion and Nur Ziana, Norizat and Ahmad Redza, Ahmad Mokhtar (2020) Flow study in structure of the plasma torch for microwave plasma spray. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 56-60. ISSN 2636-9575. (Published)

Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Muhammad Amirul, Abdullah and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The classification of skateboarding tricks : A transfer learning and machine learning approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 1-12. ISSN 2637-0883. (Published)

N, Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2020) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. IOP Conference Series: Earth and Environmental Science, 700. pp. 1-9. ISSN 1755-1307(Print); 1755-1315(Online). (Published)

N. E. H., Zamiruddin and Nurrina, Rosli (2020) Application of minimum quantity lubrication for various machining processes - A mini review. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 40-47. ISSN 2636-9575. (Published)

N. F., Zamrud and S.N.A.M., Zaini and M. Y., Abu (2020) A case study on the determination of unused capacity using time driven activity-based costing for electronic component. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 74-85. ISSN 2289-697X. (Published)

N. F. A., Ghani and S. N. A. M., Zaini and Mohd Yazid, Abu (2020) Assessment the unused capacity using time driven activity based costing in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 82-94. ISSN 2636-9575. (Published)

Naqibah, Azman and Nik Hisyamudin, Muhd Nor and Mohd Fahrul, Hassan and Mohd Hafiz, Burhan and Siti Zarina, Mohd Muji and Fariza, Mohamad and Faiz, Mohd Turan and Abdul Rahman, Bahasa and Seiji, Yokoyama (2020) Industrial guideline for injection moulding: case of jaundice meter. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 299-303. ISSN 2278-3091. (Published)

Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Nor Hasrul Akhmal, Ngadiman (2020) A major review on tribology-based materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (2). pp. 26-37. ISSN 2289-7879. (Published)

Norfatihah, Ismail and Iqbal, AKM Asif (2020) Microstructure and mechanical properties of biodegradable Mg-SiO2 nanocomposite. Russian Journal of Non-Ferrous Metals. ISSN 1934-970X. (Unpublished) (Unpublished)

Norhamiza, Hamzah and Siti Zubaidah, Ismail (2020) Integrating comprehensive industrial raw material delivery planning and product-service system inventory control. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 14-22. ISSN 2636-9575. (Published)

Nur Ain Zarani, Zailani and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Saiful Nizam, Tajuddin and Che Mohd Aizal, Che Mohd (2020) Inspection of crude oil condition using electronic nose (E-nose). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 47-51. ISSN 2637-0883. (Published)

Nur Amalina, Sabuan and Mebrahitom, A. and Azmir, Azhari and Mulubrhan, Freselam and Alemu, Tamiru (2020) Investigation on the electrical conductivity of Al2O3-Ti ceramic composites using a pressureless sintering process. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (Published)

Nur Amanda, Nazli and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohammad and Zainul, Baharum and Mohamed Yusof, Ishak (2020) Intelligent classification of cocoa bean using E-nose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 28-35. ISSN 2637-0883. (Published)

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa (2020) Mode choice prediction using machine learning technique for a door-to-door journey in Kuantan City. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 73-78. ISSN 2637-0883. (Published)

Nursyiqah, Jasman and Ahmad Shahir, Jamaludin and M. N. N., Razali and A. N. A., Ghafar and M. A., Hadi (2020) Design of spline surface vacuum gripper for pick and place robotic arms. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 48-55. ISSN 2636-9575. (Published)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Anwar, P. P. Abdul Majeed (2020) The normal vehicle forces effects of a two in-wheel electric vehicle towards the human brain on different road profile maneuver. SN Applied Sciences, 2 (223). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Nurul Akmal, Che Lah and Aqilah, Kamaruzaman and Trigueros, Sonia (2020) pH-dependent formation of oriented zinc oxide nanostructures in the presence of tannic acid. Nanomaterials, 11 (1). pp. 1-14. ISSN 2079-4991. (Published)

Nurul Akmal, Che Lah and Muhammad Nasrulamin, Mesran and Mohd Mawardi, Saari (2020) Frequency-dependent of AC susceptibility in chitosan oligosaccharide-Ag nanostructures. Journal of Alloys and Compounds, 835 (155366). pp. 1-16. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Nurul Farahin, Zamrud and Mohd Yazid, Abu (2020) Comparative study: Activity based costing and time driven activity based costing in electronic industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 68-81. ISSN 2636-9575. (Published)

Nurul Farhana, Abu Kassim and Wan Farhana, Wan Idris and Abu Hannifa, Abdullah and Kamal, Yusoh and Zulhelmi, Ismail (2020) The preparation of graphene ink from the exfoliation of graphite in pullulan, chitosan and alginate for strain-sensitive paper. International Journal of Biological Macromolecules, 153. pp. 1211-1219. ISSN 0141-8130. (Published)

Nurul Farhana, Mohadzir and Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) In-situ worn geometry effect over the surface roughness propagation during micro milling process. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 1-7. ISSN 2636-9575. (Published)

Nurul Qastalani, Radzuan and Mohd Hasnun, Arif Hassan and Anwar P.P., Abdul Majeed and Rabiu Muazu, Musa and Khairil Anwar, Abu Kassim (2020) Forecasting road deaths in Malaysia using support vector machine. The 5th International Conference on Electrical, Control & Computer Engineering (InECCE 2019). ISSN ISBN:978-981-15-2317-5. (In Press / Online First) (In Press / Online First)

Omar, Ibrahim Ayasrah and Faiz, Mohd Turan (2020) Research gaps in multi-criteria decision making methods for researchers as an areas of interest. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 1-6. ISSN 2636-9575. (Published)

P. N. F. M., Shamsuddin and Muhamad Arifpin, Mansor and M. S. A., Hadi and N. Z., Abidin and R., Ibrahim (2020) Development of water trash collector. Journal of Advanced Industrial Electronics Research and Applications (JAIERA), 1 (1). pp. 1-5. ISSN 2756-7842. (Published)

Putri Nur Farhanah, Mohd Shamsuddin and Muhamad Arifpin, Mansor and Roshahliza, M. Ramli and Raja Mariatul Qibtiah, Raja Jaapar (2020) Development of navigation system for unmanned surface vehicle by improving path tracking performance. Journal of Engineering Science and Technology, 15 (2). pp. 1371-1383. ISSN 1823-4690. (Published)

Qayyum, Halim and Nik Abdullah, Nik Mohamed and M. R. M., Rejab and Mohd Rashidi, Maarof (2020) Fracture response of La61.4Al15.9Ni11.35Cu11.35 bulk metallic glass subjected to quasi-static compression loading. Materials Today: Proceedings, 27 (Part 2). pp. 1761-1767. ISSN 2214-7853. (Published)

Rashid, Mamunur and Norizam, Sulaiman and Anwar, P. P. Abdul Majeed and Rabiu Muazu, Musa and Ahmad Fakhri, Ab. Nasir and Bari, Bifta Sama and Sabira, Khatun (2020) Current status, challenges, and possible solutions of EEG-based brain-computer interface: a comprehensive review. Frontiers in Neurorobotics, 14 (25). pp. 1-35. ISSN 1662-5218. (Published)

Rozaidi, Zaharudin and Radhiyah, Abd Aziz (2020) Thermal conductivity and stability studies of cooking and waste cooking oil as a based fluid of TiO2 nanofluid for carbon steel quenching process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 22-33. ISSN 2289-7879. (Published)

S. N. A. M., Zaini and Abu, Mohd Yazid (2020) Assessment the capacity utilization of mature and immature area of replanting using time driven activity based costing. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 7-11. ISSN 2636-9575. (Published)

S. N. A. M., Zaini and C. W., Zheng and Mohd Yazid, Abu (2020) Costing structure improvement using activity based costing in palm oil plantation of Malaysia. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 95-109. ISSN 2636-9575. (Published)

Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Hamdan, Daniyal and Aisha, Muhammad (2020) Performance comparison of series and parallel damped LCL filters using 5-level voltage source converter. SN Applied Sciences, 2 (471). pp. 1-13. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Siti Aishah, Wahid and Izwan, Ismail (2020) Optimization of Magneto-Rheological Fluids on the volume fraction and viscosity for MR damper application. Southeast Asian Journal of Technology and Science, 1 (1). pp. 1-6. (Published)

Siti Nursyuhada, Mahsahirun and Nik Rumzi, Nik Idris and Zulkifli, Md. Yusof and Sutikno, Tole (2020) Fundamental elements of constant volt/hertz induction motor drives based on dSPACE DS1104 controller. International Journal of Power Electronics and Drive System (IJPEDS), 11 (4). pp. 1670-1685. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)

Suhaimi, Puteh and Nurul Fadhilah, Mohamed Rodzali and Mohd Azraai, Mohd Razman and Zelina Zaiton, Ibrahim and Muhammad Nur Aiman, Shapiee and Mohd Azhar, Mohd Razman (2020) Features extraction of capsicum frutescens (C.F) NDVI values using image processing. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 38-46. ISSN 2637-0883. (Published)

Tan, Eijyne and Rishwaraj, G. and Ponnambalam, S. G. (2020) Development of a task-oriented, auction-based task allocation framework for a heterogeneous multirobot system. Sadhana, 45 (1). pp. 1-13. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Venketaramana, Balachandran and Muhammad Nur Aiman, Shapiee and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2020) Deep learning based human presence detection. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 55-61. ISSN 2637-0883. (Published)

Wahaizad, Safiei and M. M., Rahman and Kulkarni, R. R. and Md Noor, Ariffin and Zetty Akhtar, Abd Malek (2020) Thermal Conductivity and Dynamic Viscosity of Nanofluids: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (2). pp. 66-84. ISSN 2289-7879. (Published)

Yong, Wai Xhuen and Ahmad Najmuddin, Ibrahim (2020) Field study of PID parameter tuning investigation in peristaltic dosing pump control for use in automated fertilizer mixing system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 13-22. ISSN 2637-0883. (Published)

Zaitun, Zainal Abidin and Siti Zubaidah, Ismail (2020) Analysis of product-service solution inventory record for Malaysian palm oil argibusiness. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 1-6. ISSN 2636-9575. (Published)

Book Chapter

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof (2020) Red and blue channels correction based on green channel and median-based dual-intensity images fusion for turbid underwater image quality enhancement. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019, NUSYS'19. Lecture Notes in Electrical Engineering, 666 (666). Springer, Singapore, pp. 73-86. ISBN 978-981-15-5280-9

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Muhammad Aizzat, Zakaria (2020) The classification of skateboarding trick manoeuvres through the integration of IMU and machine learning. In: Embracing Industry 4.0. Lecture Notes in Electrical Engineering, 678 . Springer Singapore, Singapore, pp. 125-132. ISBN 978-981-15-6024-8 (Printed) 978-981-15-6025-5(Online)

Conference or Workshop Item

Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Choong, Chun Sern and Mohd Azraai, Mohd Razman and Azura, Azmi (2020) Comparison of support vector machine and friis equation for identification of pallet-level tagging using RFID signal. In: 10th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2020 , 18 - 19 April 2020 , Malaysia. pp. 215-219.. ISBN 978-172815033-8 (Published)

Ahmad Fakhri, Ab. Nasir and Choong, Chun Sern and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman (2020) The identification of RFID signal using k-means for pallet-level tagging. In: 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Kuantan; Malaysia. pp. 195-203., 678. ISSN 1876-1100 ISBN 978-981156024-8 (Published)

Ahmad Fakhri, Ab. Nasir and Eng, Seok Nee and Chun, Sern Choong and Ahmad Shahrizan, Abdul Ghani and Anwar, P. P. Abdul Majeed and Asrul, Adam and Mhd, Furqan (2020) Text-based emotion prediction system using machine learning approach. In: 6th International Conference on Software Engineering and Computer Systems, ICSECS 2019 , 25 - 27 September 2019 , Vistana Kuantan City Center, Kuantan, Pahang. pp. 1-11., 769 (1). ISSN 1757-8981 (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of ZnO nanoparticles in the presence of Tannic acid. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 61-64., 41 (168124). ISSN 2214-7853 (Published)

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Investigation of wear performance of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1740-1744., 46 (169722). ISSN 2214-7853 (Published)

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Morphological study of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1745-1748., 46 (169722). ISSN 2214-7853 (Published)

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2020) Review on the Prominence of SMEs in Malaysia and Its’ Imprint on University Industry Collaboration. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 96-100.. ISBN 978-981-15-0950-6 (Published)

Harun Dzulquornain, Idris and Muhammad Aizzat, Zakaria and Ahmad Najmuddin, Ibrahim (2020) Outdoor position estimation of a mobile platform for precision farming and agriculture automation. In: 7th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2020. 7th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2020 , 18 - 20 December 2020 , Kuala Lumpur. pp. 1-6. (9484294). ISBN 978-073810504-8 (Published)

Ibrahim, Muhammad Ar Rahim and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2020) The classification of skateboarding Trick Manoeuvres: A Frequency-Domain Evaluation. In: Embracing Industry 4.0: Selected Articles from MUCET 2019 , 19-22 November 2019 , Kuantan, Pahang, Malaysia. pp. 183-194., 678. ISBN 978-981156024-8 (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Rashid, Mamunur and Md Jahid, Hasan and Mahfuzah, Mustafa and Anwar P. P., Abdul Majeed (2020) Analysis of Auditory Evoked Potential Signals Using Wavelet Transform and Deep Learning Techniques. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 396-408.. ISBN 978-981-16-4803-8 (Published)

Mahendra Kumar, Jothi Letchumy and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin (2020) The power level control of a pressurised water reactor nuclear power plant. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 451-455.. ISSN 2195-4356 ISBN 978-981-13-9538-3 (Published)

Marina, Mohamad and Jeefferie, Abd Razak and Noraiham, Mohamad and Sahrim, Haji Ahmad and Ramli, Junid and Puspitasari, Poppy (2020) A short review on polyurethane-based nanocomposites for various applications. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual. pp. 1-8., 957 (012029). ISSN 1757-8981 (Published)

Mohd Khairuddin, Ismail and Shahrul Na’im, Sidek and Anwar, P. P. Abdul Majeed and Asmarani, Ahmad Puzi and Hazlina, Md Yusof (2020) A hybrid automata framework for an adaptive impedance control of a robot-assisted training system. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 257-265., 113. ISBN 978-981-13-8323-6 (Published)

Mohd Yazid, Abu and F.L.M., Safeiee (2020) Optimization using Mahalanobis-Taguchi System for inductor component. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS 2019) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-7., 1529 (052045). ISSN 1742-6588 (Published)

Mohd Yazid, Abu and S.N.A.M., Zaini (2020) Development a new costing structure for palm oil industry using time driven activity based costing. In: 2nd Joint International Conference on Emerging Computing Technology and Sports, JICETS 2019 , 25-27 November 2019 , Bandung; Indonesia. pp. 1-7., 1529 (5). ISSN 1742-6588 (Published)

Muhammad Faris, Ramli and Kishendran, Muniandy and Asrul, Adam and Ahmad Fakhri, Ab. Nasir and Mohd Ibrahim, Shapiai (2020) Indoor occupancy estimation using carbon dioxide concentration and neural network with random weights. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems , 25-27 September 2019 , Pahang, Malaysia. pp. 1-9., 769 (012011). ISSN 1757-899X (Published)

Muhammad Nur Aiman, Shapiee and Ibrahim, Muhammad Ar Rahim and Mohd Azraai, Mohd Razman and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2020) The Classification of Skateboarding Tricks by Means of the Integration of Transfer Learning and Machine Learning Models. In: Embracing Industry 4.0: Selected Articles from MUCET 2019 , 19-22 November 2019 , Kuantan, Pahang, Malaysia. pp. 219-226., 678. ISSN 1876-1100 (Published)

Mujahid, Mohamad and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Muhamad Faruqi, Zahari and Nur Farina, Hamidon Majid and Suziyanti, Zaib and Hadi, Manap (2020) Classification of agarwood types (malaccensis and crassna) between oil and smoke using E-nose with CBR classifier. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 - 30 July 2019 , Swiss Garden Beach Resort, Kuantan. 231 -243., 632. ISSN 1876-1100 ISBN 9789811523168 (Published)

Nor Azlina, Ab. Aziz and Nor Hidayati, Abdul Aziz and Azlan, Abd Aziz and Tasiransurini, Abdul Rahman and Wan Zakiah, Wan Ismail and Zuwairie, Ibrahim (2020) Iteration strategy and ts effect towards the performance of population based metaheuristics. In: Proceeding - 2020 IEEE 8th Conference on Systems, Process and Control, ICSPC 2020. 8th IEEE Conference on Systems, Process and Control, ICSPC 2020 , 11 - 12 December 2020 , Melaka. pp. 58-63.. ISBN 978-172818861-4 (Published)

Norhafizah Suhada, Abdullah and Siti Humairah, Kamarul Bahrain and Nur Aini Sabrin, Manssor and Anwar, P. P. Abdul Majeed and Jamaluddin, Mahmud (2020) Compressive and viscoelastic behavior of arenga pinnata-silicone biocomposite. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 83-87., 41 (168124). ISSN 2214-7853 (Published)

Nur Farina, Hamidon Majid and M. S., Najib and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Muhamad Faruqi, Zahari and Suziyanti, Zaib and Mujahid, Mohamad and Tuan Sidek, Tuan Muda and Hadi, Manap (2020) The investigation of meat classification based on significant authentication features using odor-profile intelligent signal processing approach. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 July 2019 , Kuantan. pp. 179-191., 632. ISBN 9789811523175 (Published)

Nurul Qastalani, Radzuan and Mohd Hasnun Ariff, Hassan and Anwar, P. P. Abdul Majeed and Rabiu Muazu, Musa and Mohd Azraai, M. Razman and Khairil Anwar, Abu Kassim (2020) Predicting serious injuries due to road traffic accidents in Malaysia by means of artificial neural network. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 75-80.. ISBN 978-981-13-9539-0 (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6 (Published)

Phang, Yun Moon and Gebremariam, M. A. and Hamedon, Zamzuri B. and Azhari, Azmira (2020) Investigation on turning operation using die sinking EDM process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1569-1573., 46 (169722). ISSN 2214-7853 (Published)

Radhiyah, Abd Aziz and Nurziela, K. (2020) Effect of TiO2 nanofluid and hybrid TiO2 nanofluid on mechanical properties of steels for automotive applications. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-8., 1529 (052036). ISSN 1742-6596 (Published)

S. N. S., Jamaludin and M. I. A., Latiff and D. M., Nuruzzaman and N. M., Ismail and S., Basri (2020) Investigation on microstructure and hardness of nickel-alumina functionally graded material. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 127-132., 29 (Part 1). ISSN 2214-7853 (Published)

Siti Nursyuhada, Mahsahirun and Zulkifli, Md Yusof and Nik Rumzi, Nik Idris (2020) Offline artificial neural network rotor flux estimator for induction motor. In: IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2020. 2020 IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2020 , 26 - 27 September 2020 , Kota Kinabalu, Sabah. pp. 1-6. (9257845). ISBN 978-172816946-0 (Published)

Siti Suhaila, Sabarudin and Ahmad Najmuddin, Ibrahim and Yasuhiro, Fukuoka (2020) Investigation of effect of assistive grouser attack angle when moving in unconsolidated soft sand inclination slope using Discrete Element Method (DEM) simulation. In: IEEE Student Conference on Research and Development (SCOReD) , 27-28 September 2020 , Johor, Malaysia. pp. 149-153.. ISBN 978-1-7281-9317-5 (Published)

Suziyanti, Zaib and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Muhamad Faruqi, Zahari and Nur Farina, Hamidon Majid and Mujahid, Mohamad and Hadi, Manap (2020) The study of raw water based on quality parameter using smell-print sensing device. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 - 30 July 2019 , Swiss Garden Beach Resort, Kuantan. 193 -203., 632. ISSN 1876-1100 ISBN 9789811523168 (Published)

Thesis

Abdulqader Al-Maamari, Azzat Esam (2020) Study on the mechanical and wear properties of Mg/SiC/Gr hybrid metal matrix composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Annie, Lau Sheng (2020) Thermal fatigue of laser modified tool steels mould surface at high temperature. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baarath, Kunjunni (2020) Effect of unbalanced overloading on the cornering stability profile of nonholonomic two in-wheel compact electric vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin (2020) Investigation of surface metal matrix composites of reinforced aluminium alloy produced using friction stir processing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Choong, Chun Sern (2020) Automatic detection and indication of pallet-level tagging from rfid readings using machine learning algorithms. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab. Nasir, Ahmad Fakhri).

Farah Fazira, Kamaruzaman (2020) Preparation and characterization of al-al2o3 graded composite materials under different sintering conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hadi, Abdul Salaam (2020) Development of sustainability performance model for turning process by using neural network model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Efendee, Awang (2020) Magnetic polarity influence on machining performance of magnetic field-assisted edm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azmir, Mohd Azhari).

Mohd Salleh, Abdul Rahim (2020) Nano metal additive enhanced magnetorheological fluid based on rheological and thermophysical properties. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izwan, Ismail).

Mohd Syafiq, Yusoff (2020) Enhancing flange length in stamping of high strength steel sheets sm520b using stretch flanging method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Naqib Hakim, Kamarudin (2020) Computational fluid dynamic simulation of abrasive waterjet nozzle erosion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azhari, Mohd Azmir).

Nik Ruqiyah, Nik Hassan (2020) Mechanical properties and thermal stability of rPET/HDPE plastic composite. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Mazni, Ismail).

Nor Affaf, Mohd Zainal Abiddin (2020) Development of a network data envelopment analysis (DEA) model to measure the performance of the production line. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norul Amierah, Nor Zamani (2020) Study on the mechanical and tribological behaviour of Al/Al2O3/Gr hybrid metal matrix composite produced by powder metallurgy. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Soliha, Sahimi (2020) Business sustainability practice (BSP) profile assessment in Malaysia economic sectors using K-mean clustering approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Turan, Faiz).

Nurizzathanis, Mohamad Kusaseh (2020) Investigation on mechanical properties of glass fiber reinforced polyamide 6-polypropylene composites under different operating conditions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Dewan Muhammad, Nuruzzaman).

Ragupathy, Darshana Kumari (2020) Intensifying university industry collaboration through technology sharing within the Malaysian perspective. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Vivekanandan, Panneerselvam (2020) Optimisation of injection moulding process parameters using taguchi and desirability function. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zafira Adlia, Mohd Fauzi (2020) Development of dynamic programming algorithm for maintenance scheduling problem. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).