Items where Division is "Faculty of Manufacturing and Mechatronic Engineering Technology" and Year is 2024

Article

Afdhal, Junaidi and Utari, Zulfiani and Siti, Khomariyah and Gunawan, Triyanda and Nurul, Widiastuti and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2024) Utilization of polyphenylene sulfide as an organic additive to enhance gas separation performance in polysulfone membranes. RSC Advances, 14. pp. 2311-2319. ISSN 2046-2069. (Published)

Afifuddin Arif, Shihabuddin Arip and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2024) Object Detection for Safety Attire Using YOLO(You Only Look Once). Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 37-51. ISSN 2289-7895. (Published)

Ahmad Tajuddin, Mohamad and Nor Azwadi, Che Sidik and Norazlianie, Sazali and Wan Mohd Arif, Aziz Japar and Beriache, M'hamed (2024) The Effect of Surfactant on the Stability of Inorganic Salt Hydrated Phase Change Material Containing Graphene Nanoplatelet: An Experimental Investigation. Journal of Advanced Research in Micro and Nano Engineering, 18 (1). pp. 103-112. ISSN 2756-8210. (Published)

Aina Munirah, Ab Rasid and Rabiu Muazu, Musa and Abdul Majeed, Anwar P. P. and Maliki, Ahmad Bisyri Husin Musawi and Mohamad Razali, Abdullah and Mohd Azraai, Mohd Razman and Noor Azuan, Abu Osman (2024) Physical fitness and motor ability parameters as predictors for skateboarding performance: A logistic regression modelling analysis. PLoS ONE, 19 (e0296467). pp. 1-16. ISSN 1932-6203. (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Zulkhairul, Abdul Karim and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani and Kunar, Sandip and Nooriskandar, Sani (2024) Physical characterization of modified palm oil with hybrid additives nanofluids. Journal of Advanced Research in Micro and Nano Engineering, 15 (1). pp. 41-51. ISSN 2756-8210. (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Radhiyah, Abd Aziz and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2024) Tribological performance of novel modified calophyllum inophyllum nano-fluid from Pahang, Malaysia. Jurnal Tribologi, 40. pp. 1-13. ISSN 2289-7232. (Published)

Guna Rao, Kishyen Raao and Nur Qurratul Ain, Adanan and Anis Izzati, Md Yusoff and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Optimisation of Injection Moulding Process Parameters. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 182-198. ISSN 2289-7895. (Published)

Jabbar, Waheb A. and Mei Ting, Tan and Mohd Fikri Ikmal, Hamidun and Ajwad Hariz, Che Kamarudin and Wu, Wenyan and Sultan, Jamil and Alsewari, Abdulrahman A. and Mohammad A.H., Ali (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242 (122862). pp. 1-18. ISSN 0957-4174. (Published)

Kho, Brendan Lik Sen and Hua, Ang Kean and Mohd Fadzil Ali, Ahmad (2024) Enhancing Soil Health: Nanotechnologies for Effective Remediation and Sustainable Development. Sustainable Environmental Insight, 1 (1). pp. 45-57. ISSN 3036-0285. (Published)

Mehek, Rimsha and Iqbal, Naseem and Javed, Omama and Noor, Tayyaba and Liu, Wei (2024) Improved rate capability and long cycle life of metal-organic framework derived TiO2 @V2O5 composite as an efficient cathode for sodium-ion batteries. Journal of Energy Storage, 78 (109921). pp. 1-15. ISSN 2352-152X. (Published)

Ming, Lau Kai and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Assessing the Negative Impact of Palm Oil Industry in Malaysia through a Systemic Method. Journal of Advanced Research in Applied Mechanics, 116 (1). pp. 183-192. ISSN 2289-7895. (Published)

Muhammad Syahrir, Ahmad and Ahmad Rosli, Abdul Manaf (2024) Hot Embossing of Micro Grating and Its Replication Accuracy. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 118-137. ISSN 2289-7895. (Published)

Norfazilasari, Yasman and Raja Murfiqah, Raja Mohd Fouzy and Mohd Zairulnizam, Mohd Zawawi (2024) Fabrication of Polymer Light Guide Plate (LGP) using Direct CO2 Laser Structuring. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 79-91. ISSN 2289-7895. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Norazlianie, Sazali (2024) Additional of Organic Amendments in the Soil to Increase the Various Crop Yield: A Review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (2). pp. 158-174. ISSN 2462-1943. (Published)

Nur Amirah Syahirah, Azman and Faizir, Ramlie and Wan Zuki Azman, Wan Muhamad and Mohd Yazid, Abu and Nolia, Harudin (2024) Analysing the project delay causes and improving quality using multi-project strategies. Journal of Advanced Research in Business and Management Studies, 34 (1). pp. 23-34. ISSN 2462-1935. (Published)

Nur Najwa, K. A. and Hilmi, M. and Aqida, S.N. and Izwan, Ismail (2024) Hydrophobicity of laser-textured soda-lime glass. Journal of Physics: Conference Series, 2688 (1). pp. 1-11. ISSN 1742-6596. (Published)

Sakinah, Hisham and Kadirgama, Kumaran and Alotaibi, Jasem Ghanem and Alajmi, Ayedh Eid and Ramasamy, Devarajan and Norazlianie, Sazali and Mohd Kamal, Kamarulzaman and Yusaf, T. and Samylingam, L. and Aslfattahi, Navid and Kok, Chee Kuang (2024) Enhancing stability and tribological applications using hybrid nanocellulose-copper (II) oxide (CNC-CuO) nanolubricant: An approach towards environmental sustainability. Tribology International, 194 (109506). pp. 1-15. ISSN 0301-679X. (Published)

Sakinah, Muhamad Hisham and Norazlianie, Sazali and Kadirgama, Kumaran and Ramasamy, Devarajan (2024) A Comprehensive Review on Tribological Behaviourof Hybrid Nanocellulose-CuO as Nanolubricantfor Piston Ring Cylinder Liner Application. Journal of Advanced Research in Micro and Nano Engineering, 18 (1). pp. 60-77. ISSN 2756-8210. (Published)

Wan Zateel Aqmaer, Wan Ab Halim and Ramli, Junid and Norazlianie, Sazali and Siregar, Januar Parlaungan and Jeefferie, Abd Razak and Deni Fajar Fitriyana, . and Cionita, Tezara and Jamiluddin, Jaafar (2024) Enhancement of flexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80. Journal of Engineering and Applied Sciences, 71 (69). pp. 1-14. ISSN 1816-949X. (Published)

Yong, Ericson and Mohamad Heerwan, Peeie and Abdullah, Zulkifli and Muhammad Izhar, Ishak and Mohd Zamri, Ibrahim and Muhammad Aizzat, Zakaria and Intan Suhana, Mohd Razelan and Ahmad Fakhri, Ab. Nasir and Zulhaidi, Mohd Jawi (2024) Investigation of the Vehicle Driving Trajectory During Turning at Intersectional Roads Using Deep Learning Model. Automotive Experiences (AE), 7 (1). pp. 63-76. ISSN 2615-6636. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhammad, Mat Noor and Rosli, Abu Bakar and Sivaraos, Subramaniam and Talal, Yusaf and Alsalman, Ali and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2024) Exploring the Potentials of Copper Oxide and CNC Nanocoolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943. (Published)

Conference or Workshop Item

Abdul Nasir, Abd Ghafar and Babu, Devin and Mohd Hanafi, Muhammad Sidik and Muhammad Hisyam, Rosle and Nurul Najwa, Ruzlan (2024) Intelligent Machining Systems for Robotic End-Effectors: State-of-the-Art and Toward Future Directions. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 83-93., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Al-Talib, Ammar A. M. and Tew, Hwa Hui and Sarah ‘Atifah, Saruchi and Noor Idayu, Mohd Tahir and Nor Fazilah, Abdullah (2024) Auto indoor hydroponics plant growth chamber. In: Proceedings Of The 2024 International Conference On Artificial Life And Robotics. The 2024 International Conference On Artificial Life And Robotics (ICAROB 2024) , 22 - 25 February 2024 , Oita, Japan. pp. 1-9.. ISBN 978-4-9913337-0-5

Cholis, N. and M. A. H., Yusoff and Lim, S. K. and Ahmad Razlan, Yusoff (2024) Experimental of Hot Machining for Stainless Steel 316L Cutting Process. In: Springer Proceedings in Materials. Innovative Manufacturing, Mechatronics and Mate- rials Forum 2023 (iM3F 2023) , 7 - 8 August 2023 , Pekan, Malaysia. pp. 135-144., 40. ISSN 2662-3161 ISBN 978-981-99-9847-0

Ganasan, Shatiskumar and Norazlianie, Sazali (2024) Classification of Distracted Male Driver Based on Driving Performance Indicator (DPI). In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 587-595., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Ikmanizardi, Basri and Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiroo (2024) Investigation of Wheel Robot Grouser Width Parameter Effect on Robot Mobility in Soft Sand Terrain Using Sand Test Bed. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 199-207., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Intan Noralisya, Mohd Yusoff and Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini (2024) Application of activity-based costing and time-driven activity-based costing for kitchen cabinet. In: Springer Proceedings in Materials. Innovative Manufacturing, Mechatronics & Materials Forum, iM3F 2023 , 7 - 8 August 2023 , Pekan, Malaysia. pp. 91-101., 40. ISBN 978-981-99-9848-7

Mogan, J. and Sandanamsamy, L. and Wan Sharuzi, Wan Harun and Ismayuzri, Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy (2024) Thermo-mechanical properties of ABS/stainless steel composite using FDM. In: Materials Today: Proceedings. Materials Today: Proceedings; Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Virtual, Online. pp. 1-6.. ISSN 2214-7853 (In Press / Online First)

Mohd Amir Shahlan, Mohd Aspar and Syukran Hakim, Norazman and Abdul Nasir, Abd Ghafar and Norasilah, Karumdin and Azizi, Miskon (2024) Nanomaterial in Robotics: Bridging the Gap Between Current Applications and Future Possibilities. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 115-123., 850. ISSN 978-981-99-8819-8 ISBN 978-981-99-8819-8

Muhamad Ridzuan, Radin Muhamad Amin and Abdul Nasir, Abd Ghafar and Norasilah, Karumdin and Ahmad Noor Syukri, Zainal Abidin and Muhammad Nur Farhan, Saniman (2024) Harnessing Machine Learning, Blockchain, and Digital Twin Technology for Advanced Robotics in Manufacturing: Challenges and Future Directions. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 61-70., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Muhammad Nur Farhan, Saniman and Muhamad Ridzuan Radin, Muhamad Amin and Abdul Nasir, Abd Ghafar and Babu, Devin and Norasilah, Karumdin (2024) The Role and Impact of Robotics Integration in Precision Machining and Manufacturing: A Comprehensive Review. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 105-113., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Muhammad Zulkifli, Abdullah Norhairi and Norazlianie, Sazali (2024) Detection of Potholes Using Image Processing Method. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 597-606., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

N., Abdul Rahman and M. F. F., Ab Rashid (2024) Modeling of Optimizing Multi-hole Drilling Toolpath Distance with Multiple Tool Dimension. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. , 2688 (012001). ISSN 1742-6596

Nur Najmiyah, Jaafar and Muhammad Nur Ajmal, Rosdi and Khairur Rijal, Jamaludin and Faizir, Ramlie and Habibah, Abdul Talib (2024) Imputation Analysis of Time-Series Data Using a Random Forest Algorithm. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 51-60., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

Nurul Akmal, Che Lah and Murthy, Puhanes (2024) Microwave-Processable Cu Nanostructures -the Morphology and Chemical Properties. In: Materials Today: Proceedings. 4th International Conference on Separation Technology, ICoST 2023 , 18-19 February 2023 , Johor Bahru, Johor, Malaysia. pp. 6-10., 96 (197995). ISSN 2214-7853

Qutaba, Syed and Azmir, Azhari and Mebrahitom, Asmelash (2024) Effect Of Surface Topography Of 8090 Al-Li Alloy During Abrasive Waterjet Peening Process. In: AIP Conference Proceedings. 5th International Conference on Automotive Innovation & Green Energy Vehicle (AiGEV2022) , 5 – 6 December 2022 , Langkawi, Kedah. pp. 1-7., 2998 (060005). ISBN 978-0-7354-4793-6

Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2024) Fabrication of micro and nanostructures on glass using non-isothermal thermal imprinting. In: Materials Today: Proceedings. 2nd International Symposium on Advanced Functional Materials , Feb 16, 2023 - Feb 16, 2023 , Kuala Lumpur, Malaysia. . ISSN 2214-7853 (In Press / Online First)

Syukran Hakim, Norazman and Mohd Amir Shahlan, Mohd-Aspar and Abdul Nasir, Abd Ghafar and Norasilah, Karumdin and Ahmad Noor Syukri, Zainal Abidin (2024) Artificial Neural Network Analysis in Road Crash Data: A Review on Its Potential Application in Autonomous Vehicles. In: Intelligent Manufacturing and Mechatronics, Lecture Notes in Networks and Systems. 4th International conference on Innovative Manufacturing, Mechatronics and Materials Forum, iM3F2023 , 07 – 08 August 2023 , Pekan, Malaysia. pp. 95-104., 850. ISSN 2367-3389 ISBN 978-981-99-8819-8

W., Safiei and Rahman, M. M. and M.Y., Ali (2024) Multi-objectives process optimization in end milling process of aluminium alloy 6061-T6 using genetic algorithm. In: AIP Conference Proceedings. 5th International Conference on Automotive Innovation and Green Energy Vehicle , 5–6 December 2022 , Pahang, Malaysia. pp. 1-18., 2998 (1). ISBN 978-0-7354-4793-6

Edited book

Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Sarah Atifah, Saruchi and Teh, Sze-Hong and Liu, Pengcheng (Ed.) (2024) Intelligent Manufacturing and Mechatronics. Lecture Notes in Networks and Systems . Springer Singapore. ISBN 978-981-99-8819-8

Newspaper

Nor Shuhada, Ibrahim (2024) Melestarikan bidang kejuruteraan sebagai bidang pilihan utama anak muda. UMPSA News .

Nur Aini Safiah, Abdullah (2024) UMPSA Universiti gemilang cipta, cinta, citra sejarah tercipta. UMPSA News .