Browse by ID Staff

A

Ahmad, Asnul Hadi and Ishak, M. and Rashidi, Maarof Mohd and Romlay, Fadhlur Rahman Mohd and Zakri, Ghazali and Ahmad Shah, Luqman Hakim (2018) Microstructure and mechanical characterization of semisolid metal components for wrought aluminium alloys. , [Research Report: Research Report] (Unpublished)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Tezara, C. (2014) Experimental Investigations And Study Corrosion Model Of Welded 6061 Aluminium Exposed In Marine Environment. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-9..

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

G

G. Q., Huang and J., Wu and W. T., Hou and L. H., Shah and A. R. H., Midawi and A. P., Gerlich and Y. F., Shen and F. Q., Meng (2021) Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing. Materials Science and Engineering: A, 806 (140831). pp. 1-14. ISSN 0921-5093. (Published)

H

Hou, Wentao and Ding, Yuquan and Huang, Guoqaing Qiang and Huda, Nazmul and Luqman Hakim, Ahmad Shah and Piao, Zhongyu and Shen, Yifu and Shen, Zhikang and Gerlich, Adrian P. (2022) The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties. International Journal of Advanced Manufacturing Technology, 121 (11-12). pp. 7661-7675. ISSN 0268-3768. (Published)

Hou, Wentao and L. H., Shah and Huang, Guoqiang and Shen, Yifu and Gerlich, Adrian (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. Journal of Alloys and Compounds, 825 (154045). pp. 1-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Huang, Guoqiang and Wu, Jie and Hou, Wentao and Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Cao, Fujun and Gerlich, Adrian and Shen, Yifu and Meng, Fanqiang (2021) A novel two-step method to prepare fine-grained SiC/Al-Mg-Sc-Zr nanocomposite: Processing, microstructure and mechanical properties. Materials Science and Engineering: A, 823 (141764). pp. 1-14. ISSN 0921-5093. (Published)

I

Ishak, M. and Idris, Siti Rabiatull Aisha and Ahmad Shah, Luqman Hakim and Rejab, Mohd Ruzaimi Mat (2017) Development of welded stiffener plates using dissimilar and similar metal joining technique. , [Research Report: Research Report] (Unpublished)

Islam, M. R. and M., Ishak and Luqman Hakim, Ahmad Shah and Siti Rabiatull Aisha, Idris and Meric, C. (2016) Dissimilar Welding Of A7075-T651 and AZ31B Alloys by Gas Metal Arc Plug Welding Method. The International Journal of Advanced Manufacturing Technology, 88 (9). pp. 2773-2783. ISSN 0268-3768(Print); 1433-3015(Online). (Published)

K

Khodabakhshi, F. and Marzbanrad, B. and L. H., Shah and Jahed, H. and Gerlich, A. P. (2017) Friction-Stir Processing of a Cold Sprayed AA7075 Coating Layer on the AZ31B Substrate: Structural Homogeneity, Microstructures and Hardness. Surface and Coatings Technology, 331. pp. 116-128. ISSN 0257-8972. (Published)

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

L

L. H., Shah and A., Gerlich and Y., Zhou. (2018) Design Guideline for Intermetallic Compound Mitigation in Al-Mg Dissimilar Welding through Addition of Interlayer. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 2667-2678. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Guo, Shihui and Walbridge, Scott and Gerlich, Adrian (2017) Effect of Tool Eccentricity on the Properties of Friction Stir Welded AA6061 Aluminum Alloys. Manufacturing Letters, 15. pp. 14-17. ISSN 2213-8463. (Published)

L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

L. H., Shah and N. F., Zainal Ariffin and A. R., Razali (2014) Application of Taguchi Optimization Technique on Dissimilar AA6061-AA7075 Friction Stir Welding. In: World Virtual Conference on Advanced Research in Materials & Engineering Applications , 22-26 September 2014 , Kuala Lumpur. . (Unpublished)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished)

L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online). (Published)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

L. H., Shah and Nurul Hidayah, Othman and Gerlich, Adrian (2017) Review of Research Progress on Aluminum-Magnesium Dissimilar Friction Stir Welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Luqman Hakim, Ahmad Shah (2021) The Camouflage That Grapples Our Perception. FTKMA Bulletin (2). p. 19. ISSN 2773-594X

Luqman Hakim, Ahmad Shah (2013) Wajarkah Malaysia miliki loji nuklear. Berita Harian, (19 Au . p. 27.

Luqman Hakim, Ahmad Shah and Hou, Wentao and Razmpoosh, Mohammad Hadi and Walbridge, Scott S. and Gerlich, Adrian P. (2022) Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. Journal of Materials Research and Technology, 21. pp. 1434-1441. ISSN 2238-7854. (Published)

Luqman Hakim, Ahmad Shah and Khodabakhshi, Farzad and Gerlich, Adrian (2019) Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. Journal of Manufacturing Processes, 37. pp. 212-219. ISSN 1526-6125. (Published)

Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds. Journal of Alloys and Compounds, 826 (154219). pp. 1-11. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Luqman Hakim, Ahmad Shah and N. H, Othman and Gerlich, A. P. (2018) Review of research progress on aluminium–magnesium dissimilar friction stir welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M

Mohd Rushdi, Mohamad and L. H., Shah and M., Ishak (2017) Investigation of Preheating Method on Joint Strength of Aluminium-Stainless Steel Dissimilar Welding Using Metal Inert Gas (MIG) Process. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-9., 238. ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

N

N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

N. H., Othman and M., Ishak and L. H., Shah (2017) Effect of shoulder to pin ratio on magnesium alloy Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-9., 238 (1). ISSN 17578981

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. .

Nur Syafiqah, Nor Sofian and Luqman Hakim, Ahmad Shah (2022) Comparative study of submerged friction stir welding of aluminium alloy using different cooling medium. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. 97 -104.. ISBN 978-1-83953-782-0

S

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

Siti Rabiatull Aisha, Idris and M., Ishak and Luqman Hakim, Ahmad Shah (2017) The Effect of ER4043 and ER5356 Filler Metal on Welded Al 7075 by Metal Inert Gas Welding. In: High Performance and Optimum Design of Structures and Materials II. WIT Transactions on The Built Environment, UK, pp. 213-224. ISBN 978-1-78466-143-4

U

Ummu Kulthum, Jamaludin and Fatimah, Dzaharudin and Normy Norfiza, A. Razak and L. H., Shah and W. Zuhriraihan, W. M. Zulkifly and Fatanah, M. Suhaimi and Azrina, Md. Ralib and Mohd Basri, Mat Nor and Christopher, G. Pretty (2017) Performance of STAR Virtual Trials for Diabetic and Non-Diabetic in HTAA Intensive Care Unit. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES) , 4-8 December 2016 , Kuala Lumpur. pp. 193-198.. ISBN 9781467377911