Browse by ID Staff

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | B | F | H | I | L | M | N | R | S
Number of items: 27.

A

Abdulhadi, Hassan Abdulrssoul and S. N., Aqida and Izwan, Ismail and M., Ishak and Mohammed, Ghusoon R. (2017) Thermally-Induced Crack Evaluation in H13 Tool Steel. Metals, 7 (11). pp. 475-485. ISSN 2075-4701. (Published)

Azhari, Azmir and Ismail, Izwan and Gebremariam, Mebrahitom Asmelash and Rahman, M. M. and Rosli, Nurrina (2019) Machinability study of structural automotive alloys using abrasive waterjet machining process. , [Research Report: Research Report] (Unpublished)

B

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

B., Norhafzan and S. N., Aqida and F., Mifthal and A. R., Zulhishamuddin and I., Ismail (2017) Effect of heating time on hardness properties of laser clad gray cast iron surface. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

F

F., Basrawi and Izwan, Ismail and Thamir Khalil, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Shahrani, Anuar (2016) A Study On The Power Generation Potential Of Mini Wind Turbine In East Coast Of Peninsular Malaysia. In: International Tropical Renewable Energy Conference (i-TREC) 2016 , 26-28 October 2016 , Bogor, Indonesia. pp. 1-9.. (Unpublished)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2020) Effect of tungsten carbide partial dissolution on the microstructure evolution of a laser clad surface. Optics & Laser Technology, 121 (105789). pp. 1-8. ISSN 0030-3992. (Published)

H

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)

I

I., Ismail and S. N., Aqida (2014) Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application. Key Engineering Materials, 611 (612). pp. 746-755. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Ismail, Izwan (2018) Development of a magnetorheological pinched mode valve for automotive semi-automotive semi-active suspension system. , [Research Report: Research Report] (Unpublished)

L

Latiff, M. I. A. and Izwan, Ismail and Nuruzzaman, D.M. (2021) Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8508 -8517. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M

M. S. A., Rahim and I., Ismail (2015) Review of Magnetorheological Fluids and Nanofluids Thermal Behaviour. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012040). ISSN 1757-899X

M. S. A., Rahim and I., Ismail and S. A., Wahid and S. N., Aqida (2017) Magnetic Field Simulation of a Thermal Conductivity Measurement Instrument for Magnetorheological Fluid. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01061). ISSN 2261-236X

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohd Rahimi, Ramli and Norasiah, Abd Razak and Izwan, Ismail and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf (2021) Effect of Dimple Size onto Wear Rate of Mild Steel AISI 1060 Surface. In: The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) , 23 November 2021 , Virtual Conference. pp. 1-4..

Mohd Salleh, Abdul Rahim and Izwan, Ismail and S. N., Aqida (2017) Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature. Materials Science Forum, 890. pp. 108-111. ISSN 0255-5476. (Published)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

N

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X

Nur Najwa, K. A. and Hilmi, M. and Aqida, S.N. and Izwan, Ismail (2024) Hydrophobicity of laser-textured soda-lime glass. Journal of Physics: Conference Series, 2688 (1). pp. 1-11. ISSN 1742-6596. (Published)

Nurain, Abdul Mutalib and Izwan, Ismail and Soffarina M., Soffie and Syarifah Nur Aqida, Syed Ahmad (2019) Rheological Properties of Magnetorheological Polishing Fluid for Micro Mould Polishing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 490-496.. ISBN 978-981-15-0950-6

Nuraini, Aziz and S. N., Aqida and I., Ismail (2017) Microstructural analysis of hot press formed 22MnB5 steel. In: 20th International ESAFORM Conference on Material Forming (ESAFORM 2017) , 26-28 April 2017 , University Dublin, Ireland. , 1896 (1). ISSN 0094243X ISBN 978-073541580-5

R

Rahimi, Ramli and Izwan, Ismail (2021) Effect of dimple diameter and pattern on frictional properties of macro-dimpled aluminium surface. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. 139 -146.. ISSN 2195-4356 ISBN 9789811573088

Reza, M. S. and S. N., Aqida and I., Ismail (2018) Laser surface modification of Yttria Stabilized Zirconia (YSZ) thermal barrier coating on AISI H13 tool steel substrate. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-4., 319 (1). ISSN 17578981

S

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Sheng, Annie Lau and Izwan, Ismail and Fazliana, Fauzun and S. N., Aqida (2019) Surface Roughness of Laser Modified Die Surface Change Under Thermal Cyclic Loading. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 441-447.. ISBN 978-981-15-0950-6

Siti Aishah, Wahid and Izwan, Ismail (2020) Optimization of Magneto-Rheological Fluids on the volume fraction and viscosity for MR damper application. Southeast Asian Journal of Technology and Science, 1 (1). pp. 1-6. (Published)

Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)

This list was generated on Fri Mar 29 06:50:33 2024 +08.