Browse by ID Staff

A

Ab Rahim, M. F. and Jaafar, A. A. and Taha, Z. and Rizalman, Mamat (2020) Simulation study on the effect of fuel injection and air intake boundary setup on the brake torque response by using comprehensive vehicle model for natural gas vehicle (NGV). In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-10., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Abdul Rahim, M. F. Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. , [Research Report: Research Report] (Unpublished)

D

D., Ramasamy and R. A., Bakar and Mohd Fadzil, Abdul Rahim and M. M., Noor (2008) Comparative Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design Using Simulation And Experimental Techniques. In: Proceedings of the 4th IASTED International Conference, Power And Energy Systems (AsiaPES 2008) , 2-4 April 2008 , Langkawi, Malaysia. pp. 359-362..

G

Gnaneshwar, Puvala Vijayakumar and Sudakaran, Shruthi Vathaluru and Abisegapriyan, Sivasubramanian and Sherine, Jositta and Ramakrishna, Seeram and Mohd Fadzil, Abdul Rahim and M. M., Yusoff and Rajan, Jose and Venugopal, J. (2019) Ramification of zinc oxide doped hydroxyapatite biocomposites for the mineralization of osteoblasts. Materials Science and Engineering: C, 96. pp. 337-346. ISSN 0928-4931. (Published)

M

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Mohd Fadzil, Abdul Rahim and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) Experimental Investigation and Development of New Correlation for Thermal Conductivity and Viscosity of BioGlycol/water based SiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 54-63. ISSN 0735-1933. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single Hole Direct Injector Simulation Validation and Parametric Sensitivity Study. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7..

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Rosli, Abu Bakar (2021) Optimization of CNG Direct Injector Parameters using model-based calibration framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 (1). Springer, Singapore, pp. 917-929. ISBN 978-981-33-4596-6 (Print) 978-981-33-4597-3 (Online)

Mohamad Hafizul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Muhamad Haziq, Mohd Ismail Rodzi and Rosli, Abu Bakar (2018) Effect of Injection Pressure, Injection Duration, and Injection Frequency on Direct Injector’s Mass Flow Rate for Compressed Natural Gas Fuel. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02008). ISSN 2261-236X

Mohd Fadzil, Abdul Rahim (2009) Numerical study of combustion for a 4-stroke gasoline engine using turbulent flame speed closure model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Mohd Fadzil, Abdul Rahim and A. A., Jaafar and R., Mamat and Zahari, Taha (2020) Parametric study of CNG-DI engine operational parameters by using analytical vehicle model. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 611-616.. ISBN 978-981-15-0950-6

Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X

Mohd Fadzil, Abdul Rahim and Zahari, Taha and Rizalman, Mamat (2017) Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method. IOP Conference Series: Materials Science and Engineering, 257. pp. 1-21. ISSN 1757-8981 (Printed); 1757-899X(Online). (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

Z

Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981