Browse by ID Staff

A

A. M., Efendee and M., Saifuldin and Gebremariam, M.A. and Azmir, Azhari (2018) Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Azhari, Azmir and Ismail, Izwan and Gebremariam, Mebrahitom Asmelash and Rahman, M. M. and Rosli, Nurrina (2019) Machinability study of structural automotive alloys using abrasive waterjet machining process. , [Research Report: Research Report] (Unpublished)

Azmir, Azhari and Zamzuri, Hamedon and Mebrahitom, A. (2017) A study on Wire Breakage in Electrical Discharge Machining of Polyurethane Foam. In: Materials Today: Proceedings, 6th International Conference of Materials Processing and Characterization (ICMPC 2016) , 5-7 December 2016 , Hyderabad, India. pp. 5222-5227., 4 (4). ISSN 2214-7853

F

Fatin Hakimah, Sharifuddin and Kassa, Freselam Mulubrhan and Gebremariam, M. A. and Azmir, Azhari and Alemu, Tamiru (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC) , 13 - 14 December 2019 , Melaka. pp. 76-79. (9067991). ISBN 978-172811826-0

G

Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Mohd Azmir, Mohd Azhari and Zamzuri, Hamedon and Ahmad Razlan, Yusoff and Muhammed Nafis, Osman Zahid (2020) Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling. , [Research Book Profile: Research Report] (Unpublished)

K

Kassa, Freselam Mulubrhan and Gebremariam, M. A. (2020) Selection of optimum replacement option for amine pump in a gas processing plant using fuzzy analytical hierarchy process. Journal of Critical Reviews, 7 (5). pp. 899-904. ISSN 2394-5125. (Published)

L

Lemma, Tamiru Alemu and Noraimi, Omar and Gebremariam, M.A. and Shazaib, Ahsan (2019) Anti-friction bearing malfunction detection and diagnostics using hybrid approach. In: Lecture Notes in Mechanical Engineering; 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018 , 14 - 15 November 2018 , Melaka. pp. 117-131.. ISSN 2195-4356 ISBN 978-981138296-3

M

M., Murugan and Mebrahitom, A. and Azmir, Azhari and Zamzuri, Hamedon (2018) Performance analysis of abrasive waterjet machining process at low pressure. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Mebrahitom, A. (2020) Lets celebrate. Kolej Kejuruteraan Bulletin, 1 . p. 19. ISSN 2773-5346

Mebrahitom, A. and Azmir, Azhari (2014) Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM. Advanced Materials Research, 1133. pp. 339-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mebrahitom, A. and Nur Amalina, Sabuan and Azmir, Azhari and Zamzuri, Hamedon and Tamiru Alemu, Lemma (2018) Microstructural and process characterization on the electrical conductivity and electrical discharge machinability of Al2O3-based ceramic composites. In: Advanced Energy Materials (AEM2018) Conference , 10 - 12 September 2018 , University of Surrey, England. p. 1.. (Unpublished)

Mebrahitom, A. and O., Mamat and F., Ahmad and A. K., Prasada Rao (2015) Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites. Journal of Advanced Ceramics, 4 (3). ISSN 2226-4108. (Published)

Mebrahitom, A. and Rizuan, D. and Azmir, Azhari and M., Nassif (2016) Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 757-8981 (print); 1757-899X (online)

Mebrahitom, A. and Seow , Xiang and Azmir, Azhari and Tamiru, A. (2017) Remaining Tool Life Prediction Based On Force Sensors Signals During End Milling Of Stavax ESR Tool Steel. In: International Mechanical Engineering Congress and Exposition (IMECE) , 3-9 November 2017 , Swiss Garden Hotel, Balok, Kuantan, Pahang. pp. 1-7.. ISBN 9780791858356

Mebrahitom, Asmelash Gebremariam (2020) Redefining and Restructuring Engineering. Kolej Kejuruteraan Bulletin, 1 . pp. 5-8. ISSN 2773-5346

Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0

N

Naqib Hakim, Kamarudin and Mebrahitom, A. and Azmir, Azhari (2017) Assembly meshing of abrasive waterjet nozzle erosion simulation. In: IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017) , 8-9 August 2017 , Kuala Lumpur, Malaysia. pp. 1-8., 290 (012069). ISSN 1757-899X

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Nur Amalina, Sabuan and Mebrahitom, A. and Azmir, Azhari and Mulubrhan, Freselam and Alemu, Tamiru (2020) Investigation on the electrical conductivity of Al2O3-Ti ceramic composites using a pressureless sintering process. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (Published)

Nur Amalina, Sabuan and Nurfatini, Zolkafli and Mebrahitom, A. and Azmir, Azhari and Othman, Mamat (2018) The development of Zirconia and Copper toughened Alumina ceramic insert. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-8., 342 (012106). ISSN 1757-899X

Nur Aziera, Nur Aziera and Mebrahitom, A. and Azmir, Azhari and Saptaji, Kushendarsyah (2023) Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 657-663.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nur Khadijah, Mazlan and Nazrin, Mokhtar and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nurul Najihaha, . and Gebremariam, M. A. and Azmir, Azhari and Mulubrhan, Freselam (2021) Simulation modeling of a manufacturing process using Tecnomatix plant simulation software. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 56-62. ISSN 2636-9575. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6

P

Phang, Yun Moon and Gebremariam, M. A. and Hamedon, Zamzuri B. and Azhari, Azmira (2020) Investigation on turning operation using die sinking EDM process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1569-1573., 46 (169722). ISSN 2214-7853

Q

Qutaba, Syed and Azmir, Azhari and Mebrahitom, Asmelash (2024) Effect Of Surface Topography Of 8090 Al-Li Alloy During Abrasive Waterjet Peening Process. In: AIP Conference Proceedings. 5th International Conference on Automotive Innovation & Green Energy Vehicle (AiGEV2022) , 5 – 6 December 2022 , Langkawi, Kedah. pp. 1-7., 2998 (060005). ISBN 978-0-7354-4793-6

S

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing , 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X

Saptaji, Kushendarsyah and Mebrahitom, A. and Azmir, Azhari (2018) Machining of biocompatible materials: a review. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2255-2292. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Saptaji, Kushendarsyah and Triawan, Farid and Sai, Tong Keong and Gebremariam, M. A. (2021) Deburring method of aluminum mould produced by milling process for microfluidic device fabrication. Indonesian Journal of Science and Technology, 6 (1). 123 -140. ISSN 2528-1410. (Published)

Suraidah, S. and Muhamad Ridzuwan, . and Gebremariam, M. A. and Azmir, Azhari and Kassa, Freselam Mulubrhan (2020) End milling finite element method for cutting force prediction and material removal analysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8., 788 (012020). ISSN 1757-8981 (Print), 1757-899X (Online)

Syazwani, H. and Mebrahitom, A. and Azmir, Azhari (2016) A Review on Nozzle Wear in Abrasive Water Jet Machining Application. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114. ISSN 1757-899X

Syed, Qutaba and Azmir, Azhari and Gebremariam, Mebrahitom Asmelash and Yadav, Aman and Lusi, Nuraini (2022) Development of fiber metal laminate composite with different glass fiber gsm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. ISSN 2214-7853 (In Press / Online First)

Y

Yusoff, A. R. and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Che Ghani, S. A. and Osman Zahid, Muhammed Nafis (2019) Suppression of chatter in high speed milling using microcontroller based speed controller by spindle speed variation method. , [Research Report: Research Report] (Unpublished)