Browse by ID Staff

A

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Dewan Muhammad, Nuruzzaman (2020) Mechanical and tribological characterization of self-lubricating Mg-SiC-Gr hybrid metal matrix composite (MMC) fabricated via mechanical alloying. Journal of Science: Advanced Materials and Devices, 5 (4). pp. 535-544. ISSN 2468-2179. (Published)

C

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996. (Published)

Chowdhury, M. A. and Debnath, U. K. and Mia, M. S. and Nuruzzaman, D. M. (2017) Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix. International Journal of Materials Engineering Innovation, 8 (3-4). pp. 159-172. ISSN 1757-2754. (Published)

Chowdhury, M. A. and Debnath, U. K. and Nuruzzaman, D. M. and Islam, Monirul (2017) Erosion of Mild Steel for Engineering Design and Applications. Journal of Bio- and Tribo-Corrosion, 3 (3). pp. 1-17. ISSN 2198-4220(print); 2198-4239(online). (Published)

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952. (Published)

D

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2017) The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 45 (3). pp. 773-787. ISSN 0090-3973. (Published)

F

Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished)

I

Iqbal, A. K. M. Asif and Sakib, Nazmus and Iqbal, A. K. M. Parvez and Nuruzzaman, D. M. (2020) Graphene-based nanocomposites and their fabrication, mechanical properties and applications. Materialia, 12 (100815). pp. 1-22. ISSN 2589-1529. (Published)

Iqbal, AKM Asif and Mei, Jing Lim and Nuruzzaman, D. M. (2017) Effect of compaction load and sintering temperature on the mechanical properties of the Al-SiC nano-composite materials. In: AIP Conference Proceedings: Advanced materials for sustainability and growth: Proceedings of the 3rd Advanced Materials Conference (AMC2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-8., 1901 (030006). ISSN 1551-7616 ISBN 978-0-7354-1589-8

Iqbal, AKM Asif and Nuruzzaman, D. M. (2016) Effect of the Reinforcement on the Mechanical Properties of Aluminium Matrix Composite: A Review. International Journal of Applied Engineering Research, 11 (21). pp. 10408-10413. ISSN 0973-4562. (Published)

M

M. M., Rahman and Chowdhury, M. A. and Nuruzzaman, D. M. and Debnath, U. K. and Kowser, M. A. and Roy, B. K. (2016) Deposition Rates on Stainless Steel Substrates of Different Surface Roughnesses Under Different Operating Conditions using Thermal CVD. International Journal of Surface Science and Engineering, 10 (3). pp. 282-302. ISSN 1749-7868. (Published)

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

N

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman and Noraini, Mohd Razali and Suriati, Ghazali (2019) The effect of MAPE compatibilizer agent on the tensile strength of recycled PET/HDPE plastic composite. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 484-489.. ISBN 978-981-15-0950-6

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Suriati, Ghazali and Nuruzzaman, D. M. (2018) Thermal properties of polyethylene reinforced with recycled– poly (ethylene terephthalate) flakes. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 17578981

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Fabrication and characterization of Al2O3 nanoparticle reinforced aluminium matrix composite via powder metallurgy. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 190-195., 29 (1). ISSN 2214-7853

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite. Russian Journal of Non-Ferrous Metals, 60 (3). pp. 274-281. ISSN 1934-970X (Online). (Published)

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) Characterization of tin oxide (SnO2) nanostructures prepared by thermal oxidation. In: AIP Conference Proceedings: 6th International Conference on Production, Energy and Reliability, ICPER 2018 , 13 - 14 Aug 2018 , Kuala Lumpur Convention Center, Kuala Lumpur. pp. 1-6., 2035. ISSN 0094243X ISBN 978-073541761-8

Nuraini, Abdullah and Noor Mazni, Ismail and Nuruzzaman, D. M. (2018) Preparation of tin oxide (SnO2) thin films using thermal oxidation. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Mohammad Asaduzzaman, Chowdhury and A. K. M., Asif Iqbal and Noor Mazni, Ismail and Fatchurrohman, Nanang and Chan, Shin Yi (2020) Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 466-471.. ISBN 978-981-15-0950-6

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, M. A. and M. M., Rahman and Roy, B. K. and Chakraborty, S. and Islam, M. D. and Aktaruzzaman, M. and Mohammad, N. (2014) Sliding Friction of Steel Combinations. The Open Mechanical Engineering Journal, 8. pp. 364-369. ISSN 1874-155X. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, M. L. and A. N., Oumer (2016) Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and A. N., Oumer and Ismail, N. M. and Basri, S. (2016) Experimental Investigation on the Mechanical Properties of Glass Fiber Reinforced Nylon. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853

S

S. N. S., Jamaludin and M. I. A., Latiff and D. M., Nuruzzaman and N. M., Ismail and S., Basri (2020) Investigation on microstructure and hardness of nickel-alumina functionally graded material. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 127-132., 29 (Part 1). ISSN 2214-7853

Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Faizal, Mustapha and Nuruzzaman, D. M. and Muhammad Ihsan, Abdul Latiff and Noor Mazni, Ismail (2017) Phase Contamination Characterization of Stepwise-built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. In: 5th International Conference on Engineering and Innovative Materials, ICEIM 2016 , 10 - 12 September 2016 , Kuala Lumpur, Malaysia. pp. 90-96., 889. ISSN 0255-5476

Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Chan, Shiau Wei and Bukhari, Manshoor and M. S. M., Sani and Amir, Khalid (2017) Study of a simply-supported beam with attached multiple vibration absorbers by using finite element analysis. Advanced Science Letters, 23 (5). pp. 3951-3954. ISSN 1936-6612. (Published)