Browse by Journal Title

C

Chong, Y. K. and Liang, Y. Y. and Lau, W. J. and Fimbres Weihs, G. A. (2022) 3D CFD study of hydrodynamics and mass transfer phenomena for spiral wound membrane submerged-type feed spacer with different node geometries and sizes. International Journal of Heat and Mass Transfer, 191 (122819). pp. 1-10. ISSN 0017-9310. (Published)

H

Hong Kun, Lu and Noor, M. M. and Wenlin, Yu and K., Kadirgama and Badruddin, I. A. and Kamangar, S. (2024) Experimental research on heat transfer characteristics of a battery liquid-cooling system with ⊥-shaped oscillating heat pipe under pulsating flow. International Journal of Heat and Mass Transfer, 224 (125363). pp. 1-15. ISSN 0017-9310. (Published)

I

Ibrahim, Thamir K. and Marwah Noori, Mohammed and Mohammed, Kamil Mohammed and G., Najafi and Nor Azwadi, Che Sidik and F., Basrawi and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118. pp. 832-846. ISSN 0017-9310. (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Ihsan Ali, Ghani and Nor Azwadi, Che Sidik and R., Mamat and G., Najafi and Tan, Lit Ken and Yutaka, Asako and Wan Mohd Arif, Aziz Japar (2017) Heat Transfer Enhancement In Microchannel Heat Sink Using Hybrid Technique of Ribs and Secondary Channels. International Journal of Heat and Mass Transfer, 114. pp. 640-655. ISSN 0017-9310. (Published)

K

K., Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2018) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer, 118. pp. 617-627. ISSN 0017-9310. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat and Sharma, K. V. (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1143-1152. ISSN 0017-9310. (Published)

L

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

L. Syam, Sundar and Kumar, N. T. Ravi and Naik, M. T. and Sharma, K. V. (2012) Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3O4 Magnetic Nanofluid Inside a Plain Tube: An Experimental Study. International Journal of Heat and Mass Transfer, 55 (11-12). pp. 2761-2768. ISSN 0017-9310. (Published)

M

M. F., Nabil and Azmi, W. H. and Abdul Hamid, K. and R., Mamat (2018) Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer, 124. pp. 1361-1369. ISSN 0017-9310. (Published)

M.Kh, Abdolbaqi and Rizalman, Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. and P., Selvakumar (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of BioGlycol/water based TiO2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108. pp. 1026-1035. ISSN 0017-9310. (Published)

Muhammad Hafiz, Hamzah and Nor Azwadi, Che Sidik and Tan, Lit Ken and R., Mamat and Najafi, G. (2017) Factors Affecting the Performance of Hybrid Nanofluids: A Comprehensive Review. International Journal of Heat and Mass Transfer, 115. pp. 630-646. ISSN 0017-9310. (Published)

Muhamad Zuhairi, Sulaiman and Matsuo, Daisuke and Enoki, Koji and Okawa, Tomio (2016) Systematic Measurements of Heat Transfer Characteristics in Saturated Pool Boiling of Water-Based Nanofluids. International Journal of Heat and Mass Transfer, 102. pp. 264-276. ISSN 0017-9310. (Published)

N

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nor Azwadi, Che Sidik (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130. pp. 1163-1169. ISSN 0017-9310. (Published)

S

Shah, Syed Nadeem Abbas and Shahabuddin, Syed and Mohd Faizul, Mohd Sabri and Mohd Faiz, Mohd Salleh and Mohamad Azlin, Ali and Hayat, Nasir and Nor Azwadi, Che Sidik and Mahendran, Samykano and Saidur, R. (2020) Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids. International Journal of Heat and Mass Transfer, 150 (118981). pp. 1-20. ISSN 0017-9310. (Published)

U

Uddin, Md. Jashim and M. Nomani, Kabir and Bég, O. Anwar (2016) Computational Investigation of Stefan Blowing and Multiple-Slip Effects on Buoyancy-Driven Bioconvection Nanofluid Flow With Microorganisms. International Journal of Heat and Mass Transfer, 95. 116 - 130. ISSN 0017-9310. (Published)