Browse by Journal Title

Muhammad Aminuddin, Rosnizan and Mohamed Reza Zalani, Mohamed Suffian and Khairul Ihsan, Yaakob and Fatin Syairah, Yusoff and Mohd Rashidi, Maarof (2025) Evaluation of modified ductile Ni-Resist alloy solidification with higher chromium and manganese. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 27-37. ISSN 2289-7895. (Published)

Hairulazwan, Hashim and Amirul Syafiq, Sadun and Nor Anija, Jalaludin and Chulakit, Saranjuu and Suziana, Ahmad and Nur Aminah, Sabarudin and Muhammad Ashraf, Fauzi and Wang, Zhiwen (2025) Development of machine down-time monitoring system for production line efficiency evaluation. Journal of Advanced Research in Applied Mechanics, 133 (1). pp. 1-11. ISSN 2289-7895. (Published)

Sharifah Maszura, Syed Mohsin and Hammood, Rasheed Abed and Nur Farhayu, Ariffin and Khairunisa, Muthusamy and Saffuan, Wan Ahmad (2025) Steel fiber performance in reinforced concrete deep beams with mid-span web opening. Journal of Advanced Research in Applied Mechanics, 133 (1). pp. 52-62. ISSN 2289-7895. (Published)

Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and Norhaida, Ab Razak and Zureena, Abu Samah (2025) Evaluation of yield strength under small punch loading with different specimen thicknesses. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 16-26. ISSN 2289-7895. (Published)

Mohamed Reza Zalani, Mohamed Suffian and Mohd Rashidi, Maarof and Juliawati, Alias and Asnul Hadi, Ahmad (2025) Effects of interface bonding of NiCrAlY on sandblasted laser modified H13 tool steel. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 168-179. ISSN 2289-7895. (Published)

Mohd Sahril, Mohd Fouzi and Mohd Shahrir, Mohd Sani and Meifal, Rusli (2025) Enhancing dynamic behaviour of exhaust structure by reconfiguration the hanger locations using updated fe model with joint modelling strategy. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 1-15. ISSN 2289-7895. (Published)

Tan, Sze Pei and George Kana, Stephanie and Mohd Shamil, Shaari and Takahashi, Akiyuki and Mohd Akramin, Mohd Romlay (2025) Predicting embedded crack growth behaviour using s-version finite element method of AlSi10Mg material. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 38-53. ISSN 2289-7895. (Published)

Norhidayah, Mohamed and Muhammad Farhan, Zolkepli and Ahmad Safuan, A. Rashid and Muhammad Syamsul Imran, Zaini and Mohd Fakhrurrazi, Ishak (2025) Characterization of residual soil properties on slope in Dusun UTM, Johor. Journal of Advanced Research in Applied Mechanics, 132 (1). pp. 11-25. ISSN 2289-7895. (Published)

Muhamad Wafi, Ahmad Musrab and Auni Hasyilah, Abu Yazid and Nadzirah, Mohd Mokhtar (2025) Conversion of oil palm empty fruit bunch fiber waste into green liquid organic fertilizer. Journal of Advanced Research in Applied Mechanics, 125 (1). pp. 161-173. ISSN 2289-7895. (Published)

Nurin Arissa, Noor Azmi and Muhammad Fahmi, Ariffin and Noor Yahida, Yahya and Siang, Lee Yong (2025) Enhancement on anaerobic digestion of food waste using spend coffee ground derived biochar for biogas production. Journal of Advanced Research in Applied Mechanics, 125 (1). pp. 93-102. ISSN 2289-7895. (Published)

Mohd Nasuha, Ab Halim and Mohd Rashidi, Maarof and Mohamed Reza Zalani, Mohamed Suffian and Asnul Hadi, Ahmad (2025) Evaluation of volume to area ratio to aluminum alloy microstructure. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 180-189. ISSN 2289-7895. (Published)

Hafiz, Husin and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Kushendarsyah, Saptaji and Azmir, Azhari (2025) Experimental investigation on the effect of masked multiple passes abrasive waterjet machining surface texturing on coefficient of friction. Journal of Advanced Research in Applied Mechanics, 126 (1). pp. 138-148. ISSN 2289-7895. (Published)

Lee, Man Djun and Siti Khadijah, Alias and Ros Syazmini, Mohd Ghani and Chong, Kok Hing and Lee, Pui San (2025) Exploiting the potential of oil palm frond fibre in recycled pulp blending for improved paper strength and sustainability. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 54-71. ISSN 2289-7895. (Published)

Abdul Fattah, Mohamad Tahir and Nur Najwa, Khairul Azman and Syarifah Nur Aqida, Syed Ahmad and Izwan, Ismail (2025) Wettability of laser surface modified soda lime silica glass. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 80-95. ISSN 2289-7895. (Published)

Zawani, Ismail and Moinuddin Mohammed, Quazi and Mahadzir, Ishak@Muhammad and Aiman, Mohd Halil and Ahmed, Arslan (2025) The effect of heat input on the weld geometry, distortion and peel strength on pulsed laser wobbling of austenitic stainless-steel foils. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 166-177. ISSN 2289-7895. (Published)

Khairul Ihsan, Yaakob and Mohd Rashidi, Maarof and Muhammad Aminuddin, Rosnizan and Asnul Hadi, Ahmad (2024) Evaluation of dendritic structure of modified ductile Ni-Resist. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 159-167. ISSN 2289-7895. (Published)

Khairul Ihsan, Yaakob and Mohd Rashidi, Maarof and Muhammad Aminuddin, Rosnizan and Mohamed Reza Zalani, Mohamed Suffian and Asnul Hadi, Ahmad (2024) Evaluation of graphite size of modified ductile ni-resist with higher manganese. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 130-139. ISSN 2289-7895. (Published)

Nurul Shafiqah, Shahrulnizam and Nuryazmeen, Farhan Haron and Siti Nurhayati, Mohd Ali and Noor Suraya, Romali and Ibrahim, Saerahany Legori and Sediqi, Mohammad Naser and Mazlin, Jumain and Zulkiflee, Ibrahim (2024) Investigation of the estuarine salinity-morphology characteristics effects. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 24-31. ISSN 2289-7895. (Published)

Ahmad Nor Kasruddin, Nasir and Mohd Almaa Anwari, Roslan and Mohd Falfazli, Mat Jusof and Mohd Redzuan, Ahmad and Ahmad Azwan, Abdul Razak (2024) Mating-based manta ray foraging optimization for fuzzy-hammerstein model of an electric water heater. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 32-43. ISSN 2289-7895. (In Press / Online First) (Foreword) (In Press / Online First)

Rosmaliza, Mat Yaacob and Noor Amzura, Abdullah and Muhammad Zikri, Japri and Mohd Shahrir, Mohd Sani (2024) Optimizing dynamic properties of dissimilar plate structures: A model updating and response surface methodology approach. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 140-158. ISSN 2289-7895. (In Press / Online First) (In Press / Online First)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari and Fauziana, Lamin (2024) Spectral analysis of Fiber Bragg Grating sensor on glass fiber reinforced polymer. Journal of Advanced Research in Applied Mechanics, 130 (1). pp. 72-79. ISSN 2289-7895. (In Press / Online First) (In Press / Online First)

Mohd Rasidi, Ibrahim and Aishah, Ahmad and Radzman Hakim, Taufek and Suhaimi, Hassan and M. Zulafiff, Rahim and Juita Mastura, Mohd Salleh and Omar Mohd Faizan, Marwah and Zamri, Omar and Fareza, Fazidi and Razali, Abidin and Saiful Anwar, Che Ghani (2024) Investigation of lifting force affected by the velocity and Angle of Attack (AoA) In Wing-in-Ground (WiG) craft. Journal of Advanced Research in Applied Mechanics, 124 (1). pp. 99-112. ISSN 2289-7895. (Published)

Syarifuddin, Misbari and Anis Nadira, Asha’ari and Efiong Eyo, Etim (2024) Quantification of green carbon changes in relation with LULC changes using remote sensing - GIS technology in Kuantan river basin. Journal of Advanced Research in Applied Mechanics, 123 (1). pp. 1-14. ISSN 2289-7895. (Published)

Khairun Najihah, Kamarudin and Nurmunira, Muhammad and Namdar, Abdoullah (2024) Design of industrial Mg-Rich gypsum waste with concrete waste aggregate for compressibility of problematic soil. Journal of Advanced Research in Applied Mechanics, 116 (1). pp. 103-116. ISSN 2289-7895. (Published)

Mohd Saifuldin, Mokhtar and Ahmad Razlan, Yusoff and Lubis, Muhammad Sobron Yamin (2024) Effect of machining parameters on micro-burrs formation of aluminium puncher using high-speed machining process. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 47-60. ISSN 2289-7895. (Published)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Muhammad Aqil Hafizzan, Nordin and Mohd Aminudin, Jamlos and Rizalman, Mamat and M. A. M., Nawi and Agus, Nugroho (2024) Design of a low-cost IoT-based biofloc water quality monitoring system. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 153-162. ISSN 2289-7895. (Published)

Nurul Nafisah, Abdul Karim and Salwa, Mahmood and Helmy Mustafa, El Bakri and Ismail, Abdul Rahman and Mohd Fahmi, Badulrudin and Norazlianie, Sazali (2024) Development of a Survey Instrument for Measuring Firefighter Ergonomic Factors in Hose Rolling Activity A Pilot Study. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 125-135. ISSN 2289-7895. (Published)

Guna Rao, Kishyen Raao and Nur Qurratul Ain, Adanan and Anis Izzati, Md Yusoff and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Optimisation of Injection Moulding Process Parameters. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 182-198. ISSN 2289-7895. (Published)

Maleque, M. A. and Ahmed Nazrin, Md Idriss and Rosmia, Naping and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). 33 -42. ISSN 2289-7895. (Published)

Ming, Lau Kai and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Assessing the Negative Impact of Palm Oil Industry in Malaysia through a Systemic Method. Journal of Advanced Research in Applied Mechanics, 116 (1). pp. 183-192. ISSN 2289-7895. (Published)

Norfazilasari, Yasman and Raja Murfiqah, Raja Mohd Fouzy and Mohd Zairulnizam, Mohd Zawawi (2024) Fabrication of Polymer Light Guide Plate (LGP) using Direct CO2 Laser Structuring. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 79-91. ISSN 2289-7895. (Published)

Mohammad Luqman Hakim, Mustapha and Salwa, Mahmood and Helmy Mustafa, El Bakri and Ismail, Abdul Rahman and Mohd Fahmi, Badulrudin and Norazlianie, Sazali (2024) Firefighter hose rolling method: Low back pain risks analysis with full-factorial approach. Journal of Advanced Research in Applied Mechanics, 121 (1). pp. 197-210. ISSN 2289-7895. (Published)

Muhammad Syahrir, Ahmad and Ahmad Rosli, Abdul Manaf (2024) Hot Embossing of Micro Grating and Its Replication Accuracy. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 118-137. ISSN 2289-7895. (Published)

Bakhit, Abdelmoneim Ahmed and Nur Syahirah, Mohd Sabli and Mohd Faizal, Jamlos and Mohd Aminudin, Jamlos and N. H., Ramli and Muhammad Aqil, Hafizzan Nordin and Alhaj, Nura Abdalrhman and Ali, Ehtesham (2024) IoT-based Machine Learning Comparative Models of Stream Water Parameters Forecasting for Freshwater Lobster. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 137-149. ISSN 2289-7895. (Published)

Afifuddin Arif, Shihabuddin Arip and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2024) Object Detection for Safety Attire Using YOLO(You Only Look Once). Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 37-51. ISSN 2289-7895. (Published)

Yee, Lai Kok and Muhammad Syahmi, Mohd Yusoff and Ken, Tan Lit and Asako, Yutaka and Lee, Kee Quen and Kang, Hooi Siang and Siang, Gan Yee and Chuan, Zunliang and Tey, Wah Yen and Abdul Muhaimin, Zahari and Hoo, Kok Chee (2023) Velocity analysis on moving objects detection using multi-scale histogram of oriented gradient. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 35-43. ISSN 2289-7895. (Published)

Muhamad Azwar, Azhari and Nor Hasrul Akhmal, Ngadiman and Noordin, Mohd Yusof and Ani, Idris and Norazlianie, Sazali (2023) Feasibility Studies of Treated Used Cooking Palm Oil as Precursor for Bio-Lubricant. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 30-37. ISSN 2289-7895. (Published)

Junita, Mohd Said and Faiz, Mohd Turan and Norazlianie, Sazali (2023) Integrated Assessment of MIG Welding Parameters on Carbon Steel using RSM Optimisation. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 16-29. ISSN 2289-7895. (Published)

Nur Nadia, Mohd Zakaria and Rohaida, Che Man and Siti Zubaidah, Sulaiman and Siti Kholijah, Abdul Mudalip and Nor Hasmaliana, Abdul Manas and Navika Yamani, Laura (2023) Optimization of Process Parameters of Immobilized Escherichia Coli for Cyclodextrin Production. Journal of Advanced Research in Applied Mechanics, 107 (1). pp. 1-10. ISSN 2289-7895. (Published)

Najiyah Safwa, Khashi’ie and Khairum, Hamzah and Iskandar, Waini and Nurul Amira, Zainal and Sayed Kushairi, Sayed Nordin and Abdul Rahman, Mohd Kasim and Ioan, Pop (2023) Response Surface Methodology of the Unsteady Axisymmetric Magnetic Hybrid Nanofluid Flow Subject to a Shrinking Disk. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 137-148. ISSN 2289-7895. (Published)

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat (2022) Comparison of Preparation Methods Effect on the Stability of Compressor oil-based Nanolubricant. Journal of Advanced Research in Applied Mechanics, 91 (1). pp. 1-6. ISSN 2289-7895. (Published)

Norazlianie, Sazali and Ramli, Junid and Siregar, J. P. (2020) Effect of Thermal Soak Time Towards Polyimide Based-Carbon Tubular Membrane. Journal of Advanced Research in Applied Mechanics, 66 (1). pp. 1-6. ISSN 2289-7895. (Published)

Muhamad Atif, Mohamed and Norazlianie, Sazali (2019) Polyimide-based Carbon Membrane: Effect of Coating Times on Helium Separations. Journal of Advanced Research in Applied Mechanics, 64 (1). pp. 1-6. ISSN 2289-7895. (Published)

Siti Noradila, Abdullah and Norazlianie, Sazali (2019) A mini review on low carbon steel in rapid cooling process. Journal of Advanced Research in Applied Mechanics, 63 (1). pp. 16-22. ISSN 2289-7895. (Published)

Mohammad Amirulkhairi, Zubir and Muhammad Nazrin Akmal, Ahmad Zawawi and Mohd Fairuz, Azmi (2015) Synthetic Lightweight Coarse Aggregate using Offshore Sand. Journal of Advanced Research in Applied Mechanics, 12 (1). pp. 16-22. ISSN 2289-7895. (Published)