Browse by Journal Title

A

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Azli, Abd Razak (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design. Journal of Mechanical Engineering, 17 (3). pp. 55-68. ISSN 1823-5514. (Published)

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514. (Published)

Aminullah, A. R. M. and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Nurul Nadia, Mohd Zawawi and K., Kadirgama and M. N. S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) Compressor by using Al2O3/PAG Nanolubricant. Journal of Mechanical Engineering, SI 5 (1). pp. 49-61. ISSN 1823-5514. (Published)

A. Malik, Hamat and M. F., Ghazali and Priyandoko, Gigih (2017) The use of transmission line modelling for detection of leakage in pipeline. Journal of Mechanical Engineering, SI 4 (4). pp. 74-83. ISSN 1823-5514. (Published)

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and R., Mamat and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger. Journal of Mechanical Engineering, SI (1). pp. 227-236. ISSN 1823-5514. (Published)

Amir Radzi, Ab. Ghani and M. A., Hasan and M., Hamdi and Zahari, Taha (2011) Impact response of multi slotted square column. Journal of Mechanical Engineering, 8 (2). pp. 71-91. ISSN 1823-5514. (Published)

G

Gopalakrishnan, Siva and Ummu Kulthum, Jamaludin (2017) Investigation on different types of blood glucose control system. Journal of Mechanical Engineering, SI(4) (2). pp. 135-152. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

H

Hanafi, M. Yusop and M. F., Ghazali and Mohd Fadhlan, Mohd Yusof and Wan Sofian, Wan Hamat (2017) Development of intelligent leak detection system based on artificial pressure transient signal using integrated Kurtosis-based Algorithm for Z-filter Technique (I-Kaz). Journal of Mechanical Engineering, 4 (4). pp. 84-102. ISSN 1823-5514 (Print); 2550-164X (Online). (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and M. N. A. M., Yusof and H. H., Masjuki and Ali, Obed Majeed (2017) Investigation of the emission characteristics of iso-butanol additives on methanol-gasoline blends using spark ignition engine. Journal of Mechanical Engineering, S4 (1). pp. 93-106. ISSN 1823-5514 (Print); 2550-164X (Online). (Unpublished) (Unpublished)

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and Wan Sofian, Wan Hamat (2017) Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis. Journal of Mechanical Engineering, SI 4 (4). pp. 102-122. ISSN 1823-5514. (Published)

L

Lim, Chong Lye and Kamarul Arifin, Ahmad and Ahmedov, Anvarjon A. and N. M., Adam (2017) Cryogenic pipe flow simulation for liquid nitrogen. Journal of Mechanical Engineering, SI 2 (2). pp. 179-198. ISSN 1823-5514 (Print); 2550-164X (Online). (Published)

Lye, Lim Chong and Kamarul Arifin, Ahmad and Ahmedov, Anvarjon A. and Nor Mariah, Adam (2017) Derivation of three-dimensional heat transfer mathematical equations to predict conductivity of insulation systems for liquid nitrogen pipe flow. Journal of Mechanical Engineering, S1 2 (1). pp. 39-56. ISSN 1823-5514 (print); 2550-164X (online). (Published)

M

Mohamad Ihsan, Abdul Hamid and Saiful Amri, Mazlan and Nur Azmah, Nordin and Abd Fatah, Abdul Yasser and Ubaidillah, U. and Imaduddin, Fitrian and Izwan, Ismail (2023) Design and dynamic stiffness evaluation of magnetorheological elastomer bushing using FEMM and dynamic testing machine. Journal of Mechanical Engineering, 20 (1). pp. 43-60. ISSN 1823-5514. (Published)

Mimi Muzlina, Mukri and Nor Atiqah, Zolpakar and Pathak, Sunil (2023) Optimization of Machining Parameters in Turning for Different Hardness using Multi-Objective Genetic Algorithm. Journal of Mechanical Engineering, 20 (3). pp. 25-48. ISSN 1823-5514. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Putri Nur Afiqah, Nazari and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2023) Performance of hybrid Al2O3:SiO2 W:EG in PEM fuel cell distributor plate. Journal of Mechanical Engineering, 20 (3). pp. 335-354. ISSN 1823-5514. (In Press / Online First) (In Press / Online First)

Mohd Noor Hanif, M. R. and Wan Hasrulnizzam, W. H. and Musfirah, A. H. and Muhammad Ashlyzan, R. and Seri Rahayu, K. (2022) Organizing the Internal Manufacturing Complexity Elements in Adaptation of Current Manufacturing Environment: A Fuzzy Approach. Journal of Mechanical Engineering, 19 (2). pp. 169-185. ISSN 1823-5514. (Published)

Muhammad Nabil Fikri, Mohamad and Azmi, W. H. and Khamisah, Abdu Hamid and R., Mamat (2018) Heat transfer performance of Tio2– SiO2 nanofluid in water-ethylene glycol mixture. Journal of Mechanical Engineering, SI 5 (1). pp. 39-48. ISSN 1823-5514. (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and N. N. M., Zawawi and R., Mamat (2017) Improvement of nanofluid stability using 4-step UV-vis spectral absorbency analysis. Journal of Mechanical Engineering, S1 4 (2). pp. 233-247. ISSN 1823-5514 (print); 2550-164X (online). (Published)

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2017) Optimization of Automotive Manufacturing Layout for Productivity Improvement. Journal of Mechanical Engineering , SI 4 (1). pp. 171-184. ISSN 1823- 5514(print); 2550-164X(online). (Published)

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali and Manugari, Perumal (2017) Assembly Line Balancing using Heuristic Approaches in Manufacturing Industry. Journal of Mechanical Engineering, SI 4 (2). pp. 171-185. ISSN 1823-5514. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Osada, Toshiya and S. A., Che Ghani and Dayangku Noorfazidah, Awang Shri (2017) Effect of sintering parameters on physical properties of SS 316L alloy compact. Journal of Mechanical Engineering, SI 3 (2). pp. 123-131. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

Mohd Hafizu, Zakaria and Saiful Anwar, Che Ghani and Wan Sharuzi, Wan Harun and Zuriadi, Zaulkafilai and Siti Rohaida, Mohamed (2017) Fabrication of aluminium internally cooled cutting tool by means of selective laser melting (SLM). Journal of Mechanical Engineering, SI 3 (1). pp. 185-198. ISSN 1823-5514. (Published)

Mansor, U. Q. A. and Ahmad Yusri, Ismail and Asdarina, Yahya and N. F. A., Shafie and Ayub Md, Som and Nour, A. H. and R. M., Yunus (2017) Kinetic study for Ultrasonic assisted Membrane Anaerobic System (UMAS) treating decanter Palm Oil Mill Effluent (POME). Journal of Mechanical Engineering, SI 2 (2). pp. 45-56. ISSN 1823-5514 (Print); 2550-164X (Online). (Published)

N

Nurul Nadia, Mohd Zawawi and W. H., Azmi and A. A. M., Redhwan and M. Z., Sharif (2018) Thermo-Physical Properties of Metal Oxides Composite Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 28-38. ISSN 1823-5514. (Published)