Browse by Journal Title

A

Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Asri, M. N. A. M. and Abdullah, N.A.Z. and M. S. M., Sani (2021) The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8459 -8468. ISSN 2231-8380 (online). (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Aizat, Alias and Amin, A. F. M. (2021) Blast loaded steel-concrete composite slab. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). 7874 -7884. ISSN 2231-8380 (online). (Published)

Azed, M. A. and Doh, Shu Ing (2021) Properties of concrete containing microwaved sewage sludge ash. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8469 -8479. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Ibrahim and P. L., Chong and V. S., Rajasekharan and M. M., Ali and O. S., Zaroog and A. N., Oumer (2020) Investigation of the effect of different materials on convective heat transfer. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). pp. 6642-6651. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Razak, J. and Mohamad, N. and Mahamood, M. A. and Jaafar, R. and Othman, I. S. and Ismail, M. M. and Tee, L. K. and Ramli, Junid and Mustafa, Z. (2019) On the preparation of EPDM-g-MAH compatibilizer via melt-blending method. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5424 -5440. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. J. S., Hanifah and W. N. W. M. N., Hissyam and Aiman, M. H. and M., Ishak and T., Ariga (2019) Effect of copper based filler composition on the strength of brazed joint. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5090-5103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Halim, Abdul Razik and Mohd Zulkifli, Mohamad Noor and Muhamad Fariz, Failaka and Elkamel, Marwen and Elkamel, Ali (2017) Utilising biomass for renewable energy production: Optimal profitability evaluation from different processing routes. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3046-3057. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A., Abu Bakar and M. K. F., Mohd Ali and N., Md Noor and N., Yahaya and M., Ismail and Arman, Abdullah (2017) Bio-corrosion of Carbon Steel by Sulfate Reducing Bacteria Consortium In Oil and Gas Pipelines. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 2592-2600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Mohammed and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab (2016) Effect of Sodium Hydroxide on The Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane Composites. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1765-1777. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Effect of Temperature on Heat Transfer Coefficient of Titanium Dioxide in Ethylene Glycol-based Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1367-1375. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Ali, Obed M. (2014) Effects of Particulate Matter Emissions of Diesel Engine using Diesel–Methanol Blends. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 959-967. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong, Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification Using the Modal Transformation Method in Collocated and Noncollocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong , Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification using the Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Amir, Azizi (2014) Integration of Seasonal Autoregressive Integrated Moving Average and Bayesian Methods to Predict Production Throughput Under Random Variables. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1236-1250. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Chong, Wen Tong and Noroozi, Siamak (2013) Impact Force Identification by Using Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Azmi, W. H. and K. V., Sharma and R., Mamat and Shahrani, Anuar (2013) Nanofluid Properties For Forced Convection Heat Transfer: An Overview. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 397-408. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

At-Tasneem, Mohd Amin and Sallehuddin, Mohamed Haris and Zulkifli, Mohd Nopiah (2012) Stability of a Switched Linear System. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 320-330. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

B

B., Sangmesh and K., Gopalakrishna and S. H., Manjunath and N., Kathyayini and K., Kadirgama and Mahendran, Samykano and Vijayakumar, G. C. (2018) Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3852-3865. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C

Chai, S. W. and Kamaluddin, M. R. and Ab Rashid, M. F. F. (2022) Optimisation of vehicle routing problem with time windows using Harris Hawks optimiser. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9056 -9065. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2021) Spectral subtraction-based filter for experimental modal analysis under harmonics excitation force. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8480-8489. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Chong, B. W. and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng (2021) Mathematical modelling of concrete compressive strength with waste tire rubber as fine aggregate. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8344 -8355. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. H., Ng and C. F., Lai and S. N. M., Yahaya and S., Shamsudin and S. N., Aqida and F., Sharrifuddin (2019) Effect of initial blank temperature in hot press forming towards 22MnB5 springback failure. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5137-5149. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. W., Mohd Noor and R., Mamat and G., Najafi and Mohd Hafizil, Mat Yasin and C. K., Ihsan and M. M., Noor (2016) Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1917-1930. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

F

Fradinata, E. and Suthummanon, S. and Suntiamorntut, W. and M. M., Noor (2019) Compare the forecasting method of artificial neural network and support vector regression model to measure the bullwhip effect in supply chain. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4816-4834. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Fernini, B. and Temmar, M. and M. M., Noor (2018) Toward a dynamic analysis of bipedal robots inspired by human leg muscles. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3593-3604. ISSN 2231-8380 (online). (Published)

Fazliana, Fauzun and S. N., Aqida and Naher, S. and Brabazon, D. and Calosso, Francesco and Rosso, M. (2014) Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 975-980. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

H

Hamdan, Z. A and Ahmad, Z. and Johari, N. H. (2022) Investigation of muscle fatigue of the archer’s during endurance shooting. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 8987 -8995. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hidayah, N. N. and Nurihan, M. F. S. and Sumaiya, Zainal Abidin (2018) Liquid-liquid extraction of cerium using synergist extractant. Journal of Mechanical Engineering and Sciences (JMES) , 12 (1). pp. 3302-3312. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659. (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

I

Idris, Mat Sahat and Ma, Quanjin and M. R. M., Rejab (2023) A study on 3D printing usage among Malaysian users. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9483 -9491. ISSN 2231-8380 (online). (Published)

Islam, M. R. and Beg, M. D. H. (2016) Effects Of Reinforcing Arrangement Of Kenaf Fibres Into Unsaturated Polyester For Improved Properties. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2020-2030. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Irnie, Zakaria and Z., Michael and W. A. N., W. Mohamed and A. M. I., Mamat and Azmi, W. H. and R., Mamat and R., Saidur (2015) A Review of Nanofluid Adoption in Polymer Electrolyte Membrane (PEM) Fuel Cells as an Alternative Coolant. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1351-1366. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

J

Jarrah, H. T. and Mohtasebi, S. S and Ettefaghi, E. and Jaliliantabar, F. (2021) Experimental investigation of silver / water nanofluid heat transfer in car radiator. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). pp. 7743-7753. ISSN 2231-8380 (online). (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

K

K. H., Mah and Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2018) Polyester thin film composite nanofiltration membranes via interfacial polymerization: influence of five synthesis parameters on water permeability. Journal of Mechanical Engineering and Sciences (JMES) , 12 (1). pp. 3387-3398. ISSN 2231-8380 (online). (Published)

Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2017) The effect of pulse welding parameters on weld geometry of boron steel using low power fibre laser. Journal of Mechanical Engineering and Sciences (JMES), 11 (3). pp. 2895-2905. ISSN 2289-4659 (Print); 2231-8380 (Online). (Published)

Kettner, M. and Dechent, S. and Hofmann, M. and Huber, E. and Arruga, H. and R., Mamat and G., Najafi (2016) Investigating the Influence of Water Injection on the Emissions of a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1863-1881. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khairul Anuar, Shahid and M. F. M., Jaafar and F. M., Yahaya (2014) Self-Healing Behaviour of Pre-Cracked Pofa-Concretes in Different Curing Conditions. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1227-1235. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L

Latiff, M. I. A. and Izwan, Ismail and Nuruzzaman, D.M. (2021) Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8508 -8517. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L. Syam, Sundar and K. V., Sharma (2011) An Experimental Study On Heat Transfer And Friction Factor Of AL2O3 Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 99-112. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M

Mohd Firdaus, Hassan and Syazani, Mohd Sanosi and Ja'afar, Othman and Mohd Shahrul Azmi, Mohamad Yusoff (2023) Advancing balancing machine technology: A cost-effective solution for laboratory and small-medium enterprises. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9742 -9752. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. I., Ibrahim and M. R. M., Rejab and N. K., Romli and Quanjin, Ma and M. F., Rani (2023) Effects on hybridization of interlayer composites and self-reinforced polypropylene. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9679 -9688. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F., Rani and M. R. M., Rejab and M. I., Ibrahim and N. K., Romli (2023) Mechanical characterization of 3/2 fibre metal laminate materials. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9753 -9763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Fitriady and Nurizzatul Atikha, Rahmat and A. F., Mohammad and S. A., Zaki (2023) Numerical simulation of the boundary layer development behind a single quarter elliptic-wedge spire. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9421 -9432. ISSN 2231-8380 (online). (Published)

Maoqi, Li and Ishak, M. I. and Peeie, M. H. (2022) A numerical simulation of vehicle dynamics behavior for a four-wheel steering vehicle with the passive control system. Journal of Mechanical Engineering and Sciences (JMES), 16 (2). 8953 -8964. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2021) Acoustic methods in real-time welding process monitoring: Application and future potential advancement. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8490 -8507. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Munirah Ezzah, Tuan Zakaria and Saidatul Shima, Jamari and Suriati, Ghazali (2021) Synthesis of superabsorbent carbonaceous kenaf fibre filled polymer via inverse suspension polymerisation. Journal of Mechanical Engineering and Sciences (JMES), 11 (3). pp. 1-8. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ma, Quanjin and Kuai, Tengfei and M. R. M., Rejab and Manoj Kumar, Nallapaneni and M. S., Idris and Abdullah, M. H. (2020) Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). 7348 -7360. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Azrul Hisham, Mohd Adib and Lim, Sheh Hong and Mohd Shafie, Abdullah and Radhiana, Hassan and Wada, Shigeo (2020) A perspective review: Technical study of combining phase contrast magnetic resonance imaging and computational fluid dynamics for blood flow on carotid bifurcation artery. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7609-7621. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma (2019) Experimental investigation of free vibration analysis on fibre metal composite laminates. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5753-5763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and A. M., Saman and M. S. M., Sani and M. S., Mohd Zin (2019) The effect of laser stitch welding residual stress on the dynamic behaviour of thin steel structure. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5780-5790. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Y. M., Yunus and Nurul Ain, Ismail and Badhrulhisham, Abdul Aziz (2018) Economic potential assessment of rare earth extraction sequence based on rule-based framework. Journal of Mechanical Engineering and Sciences (JMES), 12 (4). pp. 4263-4274. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Munirah Ezzah, Tuan Zakaria and Saidatul Shima, Jamari and Suriati, Ghazali (2017) Synthesis of superabsorbent carbonaceous kenaf fibre filled polymer using inverse suspension polymerisation. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2794-2800. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Shaari and A. K., Ariffin and Takahashi, Akiyuki and S., Abdullah and Kikuchi, Masanori and M. R. M., Akramin (2017) Fatigue Crack Growth Analysis On Square Prismatic With Embedded Cracks Under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2511-2525. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M. A., Kamaruzaman and M., Zubair and M., Ishak (2016) Detection Of Defects On Weld Bead Through The Wavelet Analysis Of The Acquired Arc Sound Signal. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2031-2042. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Shaari and M. R. M., Akramin and A. K., Ariffin and S., Abdullah and Masanori, Kikuchi (2016) Prediction of Fatigue Crack Growth for Semi-Elliptical Surface Cracks using S-version Fem under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 10 (3). pp. 2375-2386. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mukhlish, M. Zobayer and Khan, Maksudur R. and Islam, A.R. and Akanda, A.N.M.S. (2016) Removal of Reactive Dye from Aqueous Solution Using Coagulation–Flocculation Coupled with Adsorption on Papaya Leaf. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1884-1894. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. H. M., Yasin and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and M. H., Ali (2015) Investigation on Combustion Parameters of Palm Biodiesel Operating with a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1714-1726. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Alaa and K., Yusoh and S. F., Hasany (2015) Pure Polyurethane and Castor Oil Based Polyurethane: Synthesis and Characterization. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1507-1515. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Y., Taib and Shahrani, Anuar and Hassan, Ibrahim (2015) A Review of Ground Heat Exchangers for Cooling Application in the Malaysian Climate. Journal of Mechanical Engineering and Sciences (JMES), 8. pp. 1426-1439. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and L. H., Shah and I. S. R., Aisha and W., Hafizi and M. R., Islam (2014) Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 793-806. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Makky, Essam A. and M. M., Yusoff (2014) Bioeconomy: Fermented Waste Management and Pectinases Purification from Thermomyceslanuginosus. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1196-1207. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) The Simulation of Biogas Combustion in a Mild Burner. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 995-1013. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Design and Development of MILD Combustion Burner. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 664-676. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online). (Published)

Mohd Azrul Hisham, Mohd Adib and Norashikin, Nor Tuah and Nur Hazreen, Mohd Hasni and Kahar, Osman (2013) Prediction of Blood Pattern in S-Shaped Model of Artery under Normal Blood Pressure. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 496-503. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Idris and N. M. M., Ammar and Tuan Mohammad Yusoff, Tuan Ya and At-Tasneem, Mohd Amin (2013) Transient Semi Circular Lid Driven Cavity Flow Using Non Uniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Idris and N. M. M., Ammar and T. M. Y. S., Tuan Ya and A. M., Amin (2013) Transient Semi-Circular Lid-Driven Cavity Flow Using Nonuniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and Ummu Kulthum, Jamaludin and S., Abdullah and Z.H., Hanafi and M.S., M. Zain (2012) Monitoring and Assessment of Acoustic Emission Signatures During Fatigue Mechanism of Api5lx70 Gas Pipeline Steel. Journal of Mechanical Engineering and Sciences (JMES), 2 (June 2). 237 -250. ISSN 2231-8380 . (Published)

Mohd Azrul Hisham, Mohd Adib and K., Kadirgama and N.H, Mohd Hasni and K., Osman and O., Maskon (2012) Prediction of Blood Flow Velocity and Leaflet Deformation Via 2D Mitral Valve Model. Journal of Mechanical Engineering and Sciences (JMES) , 2, Jun. pp. 217-225. ISSN 2231-8380 . (Published)

M. S., Idris and M.Irwan, M. A. and N. M. M., Ammar (2012) Steady State Vortex Structure of Lid Driven Flow Inside Shallow Semi Ellipse Cavity. Journal of Mechanical Engineering and Sciences (JMES) , 2 (Jun. pp. 133-147. ISSN 2231-8380 . (Published)

M., Kamal and M. M., Rahman and Abdul Ghaffar, Abdul Rahman (2012) Fatigue Life Evaluation of Suspension Knuckle Using Multibody Simulation Technique. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 291-300. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and K. V., Sharma and Ahmad Fitri, Yusop (2012) Influence of Palm Methyl Ester (PME) as an Alternative Fuel In Multicylinder Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 331-339. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mahendran, Moorthy and Lee, Giok Chui and Sharma, K. V. and Shahrani, Anuar (2012) Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 301-310. ISSN 2231-8380 (online). (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online). (Published)

M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N

Nadzri, N. A. and Mohd Mawardi, Saari and Zaini, M. A. H. P. and Aziz, Z. A. (2021) Referencing technique for phase detection in Eddy current evaluation. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8608 -8616. ISSN 2231-8380 (online). (Published)

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

N. M., Ali and Fatimah, Dzaharudin and E. A., Alias (2020) Nonlinear dynamics of a shell encapsulated microbubble near solid boundary in an ultrasonic field. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). pp. 7235-7243. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norfarisha, Achim and Hazlina, Husin and Zulkafli, Hassan (2019) Blending poly (3-hydroxybutyrate) with polyethylene glycol (PEG): Thermal behaviour and rheological study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5294 -5305. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nasrul Azuan, Alang (2018) Characterization of creep deformation and rupture behaviour of P92 steel weldment at 600°C. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3976-3987. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. A., Halim and Siregar, J. P. and Mathivanan, D. and Bachtiar, Dandi and Z., Ghazalli and M. R. M., Rejab and Tezara, C. (2018) The performance of mengkuang leaf fiber reinforced low density polyethylene composites. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3645-3655. ISSN 2231-8380 (online). (Published)

N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2017) Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3087-3094. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Wan Sharuzi, Wan Harun and Kananathan, J. and Samykano, Mahendran and Nurul Akmal, Che Lah and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and SpaKuantan, Pahang; Malaysia. pp. 1-7., 257 (1). ISSN 17578981

N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nik Rosli, Abdullah and Nafis Syabil, Shahruddin and R., Mamat and Aman Mohd, Ihsan Mamat and Aminuddin, Zulkifli (2014) Effects of Air Intake Pressure to the Engine Performance, Fuel Economy and Exhaust Emissions on a Small Gasoline Engine. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 949-958. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nur Azhani, Abd Razak and Shing Shian, Ng (2014) Investigation of Effects of Mig Welding on Corrosion Behaviour of AISI 1010 Carbon Steel. Journal of Mechanical Engineering and Sciences (JMES) , 75. pp. 1168-1178. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

O

Oumer, A. N. and Chen, James Lau Tze and Azizuddin, Abd Aziz (2019) A review on thermo-physical properties of bio, non-bio and hybrid nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5875-5904. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

P

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and Azizan, As'ary and Khairil Anas, Md Rezali and M. M., Noor and Shareef, Saman M. (2019) Development of evaporative intercooler heat exchanger for vehicle charge air enhancement using CFD simulation. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 6195-6217. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Patil, Nagraj and K., Gopalakrishna and B., Sangmesh and Sudhakar, K. and Vijayakumar, G. C. (2018) Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3927-3941. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Q

Quanjin, Ma and M. R. M., Rejab and Idris, Mat Sahat and M., Amiruddin and Bachtiar, Dandi and Siregar, J. P. and M. I., Ibrahim (2018) Design of portable 3-axis filament winding machine with inexpensive control system. Journal of Mechanical Engineering and Sciences (JMES), 12 (1). pp. 3479-3493. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

R

Romli, N. K. and Rejab, M. R. M. and Jiang, X. X. and Soffie, S. M. and Ishak, M. (2022) Mechanical response of galvanised steel sandwich structure with different numbers of web core and different spacing distance of web plate under bending load. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9289 -9306. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on Diesel Engine Performance Operating With Biodiesel Blend. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 226-236. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Reddy, K. Srinivasa and Murty, G.V. Ramana and Sharma, Korada Viswanatha (2011) Aerodynamic Studies in the Static Components of a Centrifugal Compressor Stage. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 75-86. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ramli, Junid and Y., Nor Imrah and A. R., Jeeferie and Mohamad Mazwan, Mahat (2011) A Study on the Potential of Cost and Energy - A Survey at Playford Building, University of South Australia. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 25-36. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S

Siti Sarah, Abdul Manan and Muhammed Nafis, Osman Zahid (2023) A parametric study of insertion and retention forces in cantilever hook. Journal of Mechanical Engineering and Sciences (JMES), 17 (1). 9360 -9369. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. M., Rosdi and R., Mamat and M. H. M., Yasin and T. F., Yusaf and F., Khoirunnisa (2022) Experimental investigation on combustion behaviour, performance and emission of fusel oil-gasoline blends using turbocharged SI engine. Journal of Mechanical Engineering and Sciences (JMES), 16 (1). 8788 -8800. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

Surenthiran, Gnanasekaran and Nor Ida Amalina, Ahamed Nordin and Mimi Maisarah, Mahadi @ Hamidi and Jun Haslinda, Shariffuddin (2021) Effect of Alkaline treatment on the characteristics of pineapple leaves fibre and PALF/PP biocomposite. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8518-8528. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Zubaidah, Sulaiman and R. M., Kasmani and A., Mustafa and Siti Kholijah, Abdul Mudalip and Rohaida, Che Man and Shalyda, Md Shaarani and Zatul Iffah, Mohd Arshad and N. S., Noor Azmi and N. A. M., Harinder Khan (2017) Effect of pipe size on acetylene flame propagation in a closed straight pipe. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3095-3103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siregar, J. P. and Farah Ayuni, Fauzi and Tezara, C. and Lim, H.Y. and M.H., Yazdi and Moey, L.K. and Lim, J.W. (2016) Factors that affect the mechanical properties of kenaf fiber reinforced polymer: A review. Journal of Mechanical Engineering and Sciences (JMES), 10 (2). pp. 2159-2175. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. A., Sulaiman and S., Balamohan and M., Moniruzzaman and Atnaw, Samson M. and A. O., Mohamed (2015) Feasibility Study of Gasification of Oil Palm Fronds. Journal of Mechanical Engineering and Sciences (JMES) , 9. pp. 1744-1757. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ali, Ourdjini and Saliza Azlina, Osman (2015) Thermal Cyclic Test for Sn-4Ag-0.5Cu Solders on High P Ni/Au and Ni/Pd/Au Surface Finishes. Journal of Mechanical Engineering and Sciences (JMES) , 9. pp. 1572-1579. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Salwani, Mohd Salleh and B. B., Sahari and Aidy, Ali and A. A., Nuraini (2014) The Effect of Automotive Side Member Filling on Car Frontal Impact Performance. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 873-880. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Sook, Fun Pang and Mei, Zhu Lau and M. M., Yusoff and Jolius, Gimbun (2014) Extraction and Microencapsulation of Polyphenols from Orthosiphon Stamineus Leaves. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1033-1041. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Muhammad Hadzreel, M. R. Aeyzarq (2013) Effect of Reinforcement Alignment to the Properties of Polymer Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 548-554. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. A., Che Ghani and Kai, Cheng and Timothy, Minton (2013) Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 356-372. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Hardinnawirda, Kahar (2012) Effect of Rice Husks as Filler in Polymer Matrix Composites. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 181-186. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

T

Thamir K., Ibrahim and M. M., Rahman (2013) Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 383-396. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

V

V., Rajendaran and S. M., Saufi and M. A. K., Zahari and A. W., Mohammad (2019) Study on stripping phase conditions on the levulinic acid extraction using supported liquid membrane. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5625 -5636. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

W

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. R., Radin (2020) Preparation, stability and wettability of nanofluid: a review. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). 7244 -7257. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

W. H., Azmi and S. N. M., Zainon and K. A., Hamid and R., Mamat (2019) A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5182-5211. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and Abdul Wahab, Mohammad and Mah, Kah Hong (2018) Polyester thin film composite nanofiltration membranes via interfacial polymerization: influence of five synthesis parameters on water permeability. Journal of Mechanical Engineering and Sciences (JMES), 12 (1). pp. 3387-3398. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wan Azhar, Wan Yusoff and Nur Shafiza Afzan, Sharif and Julie J., Mohamed and Hutagalung, Sabar Derita and Zainal Arifin, Ahmad and Mohd Zulkifly, Abdullah and Hasmaliza, Mohamad (2014) The Effect of Sintering Conditions on the Microstructure and Electrical Properties of Pb(Zr0.52Ti0.48)O3 Ceramic. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 901-906. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Y

Yunus, M. A. and Abdul Rani, M. N. and Aziz Shah, M. A. S. and M. S. M., Sani and Yahya, Z. (2021) The improvement of bolted joints model via finite element model updating method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8635-8643. ISSN 2231-8380 (online). (Published)

Yakin, H. N. and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2021) A quasi-brittle damage model in the framework of bond-based peridynamics with adaptive dynamic relaxation method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8617 -8623. ISSN 2231-8380 (online). (Published)

Z

Z., Zulkifli and N. H., Abdul Halim and Z. H., Solihin and J., Saedon and A. A., Ahmad and A. H., Abdullah and N., Abdul Raof and Musfirah, Abdul Hadi (2023) The analysis of grid independence study in continuous disperse of MQL delivery system. Journal of Mechanical Engineering and Sciences (JMES), 17 (3). 9586 -9596. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zalinawati, M. and J. P., Siregar and C., Tezara and Jaafar, Jamiluddin and Oumer, A. N. and Norazlianie, Sazali and M. H. M., Hamdan (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zaimi, M. and Azran, M. N. and Kasim, M. S. and Kamal, M. R. M. and Othman, I. S. and Lau, K. T. and Widodo, T. D. and Azizul Helmi, Sofian (2019) Effect of heat treatment on the tribological performance of electroless quaternary nickel alloy. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5637 -5652. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zahidah, Ansari and Tan, Cheng Wen and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and Mohd Zuhri, Mohd Yusuf and Nor Syaza Dinie, Mohd Marzuki (2017) Crushing Behaviour of Composite Square Honeycomb Structure: A Finite Element Analysis. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 2637-2649. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online). (Published)