Items where Subject is "R Medicine > RD Surgery"

A

Addepalli, Phanindra and Sawangsri, Worapong and Saiful Anwar, Che Ghani (2021) A qualitative study on cutting tool materials for bone surgeries. In: Materials Today: Proceedings; 2021 International Conference on Materials and System Engineering, ICMSE 2021 , 7-8 May 2021 , Karnataka. pp. 2457-2462., 47 (10). ISSN 2214-7853 (Published)

Afnan, Sh. Ahmed and Muhammad, Taher and Mandal, Uttam K. and Juliana, Md Jaffri and Deny, Susanti and Mahmood, Syed and Zainul Amiruddin, Zakaria (2019) Pharmacological properties of centella asiatica hydrogel in accelerating wound healing in rabbits. BMC Complementary and Alternative Medicine, 19 (1). pp. 1-7. ISSN 1472-6882. (Published)

Ahmad Muhaimin, Ismail (2012) Design and analysis of wheelchair in term of daily usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aina Najwa, Nadzri and Payne, Stephen J. and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke: a conceptual modelling study. In: 7th IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2020) , 1 - 3 Mar. 2021 , Langkawi (Online). pp. 1-6.. ISBN 978-1-7281-4246-3 (Published)

G

G. M., Salim and M. A., Zawawi (2022) Optical Sensor Assembly on knee Brace for continuous knee monitoring application. Journal of Medical and Biological Engineering. pp. 1-9. ISSN 1609-0985 (print); 2199-4757 (online). (Published)

G. M., Salim and M. A., Zawawi (2022) Optical goniometer for continuous knee monitoring application based on linear array photodiode. Optik, 264. pp. 1-12. ISSN 0030-4026. (Published)

K

Kouhi, Monireh and Jayarama Reddy, Venugopal and Ramakrishna, Seeram (2019) GPTMS-modified bredigite/PHBV nanofibrous bone scaffolds with enhanced mechanical and biological properties. Applied Biochemistry and Biotechnology, 188 (2). pp. 357-368. ISSN 0273-2289. (Published)

L

Lee, Xin Leong (2012) Numerical analysis on simplified 2d model of heart valve leaflets during cardiac cycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Liyana, Mohamed Yusof (2010) Accessibility for wheelchair users in public parks : a comparison between Adelaide and Kuantan. Masters thesis, The University of Adelaide (Contributors, UNSPECIFIED: UNSPECIFIED).

M

Mohamad Ilyas, Rizan and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2020) The classification of elbow extension and flexion: A feature selection investigation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 68-73. ISSN 2637-0883. (Published)

Mohammad Iskandar, Othman (2012) Analysis of blood flow in 3d heart valve model under steady state condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amin, Mad Saad (2012) Design and analysis of modular wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azrul Hisham, Mohd Adib (2011) Analysis of Echocardiography Images Using Grid Independent Technique for Patients with Mitral Valve Problems (MVP). In: International Conference on Information Science and Application (ICISA 2011), , 26-29 April 2011 , Jeju Island, Korea. . (Unpublished) (Unpublished)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine and porcine bone. In: 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO , 13-14 June 2019 , Sheffield; United Kingdom. pp. 411-414., 82. ISSN 2212-8271 (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 207-218. ISSN 0954-4119. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2020) Fast & Injurious: Reducing thermal osteonecrosis regions in the drilling of human bone with multi-objective optimization. Measurement, 152 (107835). pp. 1-15. ISSN 0263-2241. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling. Applied Thermal Engineering, 157. pp. 113583-113594. ISSN 1359-4311. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2018) Optimization of drilling parameters for thermal bone necrosis prevention. Technology and Health Care, 26 (4). pp. 621-632. ISSN 0928-7329 (Print); 1878-7401 (Online). (Published)

Mohd Faizal, Ali Akhbar and Akmal Wani, Sulong (2021) Surgical drill bit design and thermomechanical damage in bone drilling: A review. Annals of Biomedical Engineering, 49 (1). 29 -56. ISSN 0090-6964. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Shahrulnizal, Ghozali (2007) Designing a new concept of narrow dynamic compression plate (narrow DCP). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Safie (2013) Fabrication and Characterization of Bacteria Cellulose, Polyvinyl Alcohol and Fragrant Oil With Antimicrobial Effect For Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mubarik, Abdirisak and Sarah ‘Atifah, Saruchi and Mahmud Iwan, Solihin and Teh, Boon Hong and Ng, Weng Kent (2023) A mini review on nanorobots in medical field: Applications and challenges. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 13-17. ISSN 2637-0883. (Published)

Muhammad Kamal Asyraf, Pubin (2007) Designing a new concept of LC-DCP broad type bone plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

Nor Maniha, Abdul Ghani (2015) Modelling and control of a reconfigurable multipurpose wheelchair for elderly/disabled mobility. PhD thesis, University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Sarahtul Nadirah, Hairol Nizan and Farah Hanani, Zulkifli (2020) Reinforcement of hydroxyethyl cellulose / poly (vinyl alcohol) with cellulose nanocrystal as a bone tissue engineering scaffold. Journal of Polymer Research, 27 (6). pp. 1-9. ISSN 1022-9760. (Published)

Noryanti, Muhammad and Sajid, Mirza Rizwan and Roslinazairimah, Zakaria and Ahmad, Shahbaz (2019) The mediating role of metabolic syndrome in cardiovascular diseases. In: 4th Innovation And Analytics Conference & Exhibition (IACE 2019) , 25 - 29 March 2019 , EDC Hotel, Universiti Utara Malaysia. , 2138 (050020). ISSN 0094243X ISBN 978-073541881-3 (Published)

Nurdinie, Md Baliami (2013) Formulation of wound healing product from keratin protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

T

Tresna Priyana, Soemardi and Agri, Suwandi and Cholid, Badri and Anwar Soefi, Ibrahim and Sastra Kusuma, Wijaya and Siregar, J. P. (2019) Development of total hip joint replacement prostheses made by local material : an introduction. In: E3S Web of Conferences; 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering, IC-AMME 2018 , 26 - 28 September 2018 , Bali, Indonesia. pp. 1-9., 130 (01032). ISSN 2555-0403 (Published)

U

UMP, . (2011) 1,000 pengunjung tingkat kesedaran pendermaan organ. CREATE . p. 40. ISSN 1823-7487

W

Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Bee, Ting Chan and Einly, Lim and Azam, Ahmad Bakir and Nik Abdullah, Nik Mohamed (2021) The study of myocardial ischemia-reperfusion treatment through computational modelling. Journal of Theoretical Biology, 509 (110527). pp. 1-11. ISSN 0022-5193. (Published)

Wan Naimah, Wan Ab Naim and Sun, Zhonghua and Liew, Yih Miin and Chan, Bee Ting and Jansen, Shirley and Lei, Jing and Poo Balan, Ganesan and Shahrul Amry, Hashim and Ganiga Srinivasaiah, Sridhar and Lim, Einly (2021) Comparison of diametric and volumetric changes in Stanford type B aortic dissection patients in assessing aortic remodeling post-stent graft treatment. Quantitative Imaging in Medicine and Surgery, 11 (5). pp. 1723-1736. ISSN 2223-4292. (Published)

Z

Zaidie, Rahim (2009) Modification of wheelchair function for handicap purpose usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.