Items where Year is 2006

A

A., Zulkiple and Riza Atiq , Abdullah and Amiruddin, Ismail (2006) Self Financing Development Driven Transportation System. In: Conference of ASEAN Federation of Engineering Organizations , Sunway Lagoon Resort, Petaling Jaya. pp. 1-13.. (Published)

Ab Hamid, M. R. and Abdullah, Ibrahim (2006) Student-centered learning strategy : the effectiveness of scientific notebook software on students' comprehension in learning integration. , [Research Report] (Unpublished)

Abdul Hakim, Rahmad (2006) Study on the effect of substrates concentration in the production of xylanase from aspergillus niger using palm kernel cake. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdullah, Anuar (2006) The treatment of sugar cane bagasse for subsequent use as substrate for cellulase production by Aspergillus Terreus Suk-1'. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adam, Nor Arina (2006) Microcontroller (M68HC11) for fluid flow control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Addie Irawan, Hashim and R. Badlishah, Ahmad (2006) QoS Forwarding on the Optical Internet Backbone Area Using R-IWDMTC Protocol. In: Proceeding of the 1st International Conference on Advanced Technologies in Telecommunications and Control Engineering (ATTCE 2006) , 2–3 August 2006 , Nilai, Negeri Sembilan. pp. 1-4.. (Published)

Ahmad Fadzli, Zakaria (2006) Extraction of gaharu essential oil using spinning band distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Muzamir, Mazlan (2006) Tourism information system using geographical information system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Nasaruddin, Sulaiman and Kassim, Asiah and Nor Ashikin, Abdul Aziz and Yap, Chui Yan (2006) Pronunciation repair : decreasing phonemic mispronunciations bt the Malay ESL speakers using pronunciation software. , [Research Report] (Unpublished)

Ahmad Syukri, Baharudin @ Ismail (2006) Fabrication of polysulfone membrane, the effect of additive polyvynil pyrrolidole (pvp) on membrane flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman (2006) Pilot scale of the solvent extraction of value added product from zingiber officinale roscoe : essential oils and oleo resin. , [Research Report] (Unpublished)

Ahmad Ziad, Sulaiman (2006) Solvent extraction of oleo-resins from vanilla (vanilla planifolia andrews) using ultrasonic multipurpose extractor pilot plant system (UMEPPS). , [Research Report] (Unpublished)

Anita, Abdul Rani and Aini, Ahmad and Haslinda, Hashim (2006) Amalan Kecerdasan Emosi Sebagai Pendorong Kecemerlangan Sahsiah Pelajar Kolej Universiti Kejuruteraan & Teknologi Malaysia (KUKTEM). In: National Student Development Conference (NASDEC 2006) , 8-9 August 2006 , Kuala Lumpur, Malaysia. pp. 1-11.. (Published)

Arwena, Abdullah (2006) Development of asynchronous serial data comparator using fpga. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Asdarina, Yahya (2006) Extraction of ascorbic acid from fresh pineapple. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azizan, Abdul Aziz (2006) Development of hplc analysis for detection of lycopene in tomato and crude palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azrul Azmi, Yaziz (2006) Production of bioethanol from biomass waste (sugarcane). Faculty of Chemical & Natural Resources Engineering, Universiti Mlaysia Pahang.

C

Cheah, Siew Hoon (2006) Microcontroller based lift control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

E

Emma, Suali (2006) Extraction and analysis of safranal and crocin in pure saffron (crocus sativus). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Emy Syafinas, Hamid @ Osman (2006) Protein fractionation using ultrafiltration system for differents module configurations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

F

F. R. M., Romlay and M. S. M., Sani (2006) Model Modification Of Wira Center Member Bar. In: Regional Conference in Vehicle Engineering & Technology (Rivet 2006) , 3-5 July 2006 , Kuala Lumpur, Malaysia. . (Unpublished) (Unpublished)

F. R. M., Romlay and Wan Azhar, Wan Yusoff (2006) Modeling Of Gear Mechanism Using Transient Finite Element Method. In: Regional Conference on Computational Mechanics & Numerical Analysis (CMNA 2006) , 12-14 May 2006 , Banda Acheh, Indonesia. . (Unpublished) (Unpublished)

G

Ghazali, K. H. and Razali, Saifudin and Mohd Salmizan, Mohd Zain (2006) Automatic control and supervision using PC based monitoring and control system (PCMOC system) for 5 stations production line. , [Research Report] (Unpublished)

H

Hairulazam, Hairuldin (2006) Car lock indicator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Haslinda, Hashim and Hafizoah, Kassim and Noor Raha, Mohd Radzuan (2006) ICT Sebagai Motivasi Kepada Pembelajaran Dan Pengajaran Bahasa Di KUKTEM. In: National Student Development Conference (NASDEC 2006) , 8-9 August 2006 , Kuala Lumpur, Malaysia. pp. 1-8.. (Published)

Haslinda, Hashim and Hafizoah, Kassim and Noor Raha, Mohd Radzuan (2006) Utilizing ICT to Promote Motivation towards Language Learning among Engineering Students. In: The 5th Language For Specific Purposes International Seminar , April 2006 , Johor Bharu. pp. 1-13.. (Unpublished) (Unpublished)

Haslinda, Hashim and Muhammad Nubli, Abdul Wahab and Anita, Abdul Rani and Aini, Ahmad (2006) Program Soft Skills Dan Klinik Soft Skills: Konsep Dan Kaedah Pelaksanaan Ke Arah Membentuk Sikap Graduan Berdaya Saing. In: Seminar Kebangsaan Pengajian Umum (SKPU 2006) , 13-14 June 2006 , Johor Bahru. pp. 1-18.. (Published)

Hassan, Zuria Zaidura (2006) Automated guided vehicle (AGV) using 68HC11 microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hazlan, Haris (2006) Treatment of palm oil effluent (POME) using membrane bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

I

Ida Rizyani, Tahir and Haslinda, Hashim (2006) Penulisan Kreatif Sebagai Penyumbang kepada Membudayakan Kretiviti Pelajar Bersandarkan Teknologi di KUKTEM- Satu Pemangkin kepada Pelaksanaan Soft Skills. In: Persidangan Pembangunan Pelajar (NASDEC) 2006 , 8-9 August 2006 , Kuala Lumpur. . (Unpublished) (Unpublished)

Imaduddin, Abidin and Haslinda, Hashim and Jamal Rizal, Razali (2006) Wataniah Sebagai Pemangkin Penguasaan Soft Skills di Kalangan Siswa Siswi KUKTEM. In: National Student Development Conference (NASDEC 2006) , 8-9 August 2006 , Kuala Lumpur, Malaysia. pp. 1-7.. (Published)

Ismail, Nuurdianty (2006) Mini smart car. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Izni Syarinaz, Ismayuddin (2006) Fingerprint recognition using feature extraction. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

J

Jasni, Mohamad Zain and Azma, Abdullah (2006) Fingerprint Watermarking with Tamper Detection. In: 3rd International Conference on Artificial Intelligence in Engineering and Technology , 22-24 November 2006 , Kota Kinabalu, Sabah. . (Published)

Jasni, Mohamad Zain and Nor Amizam, Jusoh (2006) Fragile Image Watermarking For Medical Images. In: 3rd International Conference on Artificial Intelligence in Engineering and Technology , 22-24 November 2006 , Kota Kinabalu, Sabah. . (Published)

Jedidiah, Johnny (2006) Conceptual design of 5 kg/hr production of pentaerythritol tetradodecanoate (petd). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

K

Khairil Nazuan, Mohd (2006) Immobilization of á-amylase (ban) for sago starch hydrolysis. Faculty of Chemical & Natural Resources Engineering, University College of Engineering & Technology Malaysia.

Khairu Aizam, Ibrahim (2006) Extraction of essential oils from ginger rhizome using steam distillation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Faiq, Selaiman (2006) Case study : demolition practice of old MARA building on Lot 1767, Lot 1218 and Pt 4, Section 46, mukim Bandar Kuala Lumpur, Jalan Tuanku Abdul Rahman. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Khairunisa, Muthusamy and Mohd Warid, Hussin and Fadhadli, Zakaria (2006) Performance of Palm Oil Fuel Ash Cement Based Aerated Concrete Subjected to Different Curing Regime Towards Carbonation. In: International Conference on Science and Technology: Applications in Industry and Education (ICSTIE´06) , 8-9 December 2006 , MARA University of Technology, Penang. pp. 1-10.. (Published)

Ku Marsilla, Ku Ishak (2006) Effect of different organic loading rate on biological pretreatment to chemical pulping process. Facutly of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

L

Lim, Ting Chin (2006) Screening of xylanase producer from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lizawati, Mohamad Halit (2006) Student registration management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lokman, Faradilla (2006) Dye removal from simulated wastewater by using empty fruit bunch as an adsorption agent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

M

Masduki, Mohammad Syafiq (2006) Fabrication of polysulfone membrane : the effect of cooling process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Atif, Suleiman (2006) To convert bitumen powder to bitumen emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Akmal, Akashah (2006) Remote control car starter (RCCS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Farhan, Salleh (2006) Experimental study on infiltration using double-ring infiltrometer. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Mohammad Sopian, Abdul Jamil (2006) Virtual virus. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohammad Zulfikri, Omar (2006) Web based GIS for asset location detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Afnan, Abdullah (2006) Work process in building construction : a case study of Kelantan Trade Center (KTC). Faculty of Civil and Environmental Engineering, Kolej Universiti Kejuruteraan dan Teknologi Malaysia.

Mohd Aizudin, Abd Aziz (2006) Extraction of nigella sativa using modern hydrodistillation technique. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Mohd Amirul Hafiza, Che Adul Aziz (2006) Solvent extraction of oleoresins from vanilla plant (vanilla planifolia andrews) bu using soxhlet extractor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fadli, Abdullah (2006) The production of extracellular protease using bacillus subtilis : effect of temperature and agitation speed. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fadzli, Mohd Noris (2006) Comparison between ziegler-nichols and cohen-coon method for controller tunings. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizul, Yusof (2006) Study on construction & demolition waste management in construction site. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Mohd Farridd, Ahmad Termizi (2006) The effect of cleaning ultrafiltration membrane using different concentration of NaOH. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Che Dolah (2006) Aluminium sulphate (alum) recovery by acidification on the water treatment sludge. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hamdan Dasuki, Hamid (2006) Magnetic wastewater treatment system by using magnetic polyamide epichlorohydrin as adsorbents. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hassan, Mohd Shuib (2006) The effect of pH and biomass concentration on cadmium (Cd) uptake by saccharomyces cerevisiae from simulated waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hisyam, Yusop (2006) Production of bio-ethanol from biomass waste (sugarcane). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ikhwan, Yusof (2006) Pentaerythritol tetradodecanoate (petd) production : a study on the effects of temerature and operating time of reaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Johari, Othman (2006) Planning & scheduling by using Microsoft Project a case study of "suggestion for construction and completion the Science Department for University Islam Antarabangsa Malaysia, Bandar Indera Mahkota, Kuantan, Pahang". Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Mohd Khalild, Abdul Kadir (2006) Construction planning and scheduling a case study of "Cadangan membina dan menyiapkan Kulliyyah Sains untuk Universiti Islam Antarabangsa Malaysia. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Mohd Najib, Razali (2006) The extraction of orthosiphon stamineus using hydro distillation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Najid, Jamaludin (2006) Improving the filter system for the existing domestic waste pretreatment system in KUKTEM. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Mohd Nazri, Hassan (2006) The extraction of antioxidant from soybean. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Norawi, Mohd Azrul Hisyam (2006) Adsorption separation of heavy metals from simulated waste water using orange waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Faisal, Sulong@A Rashid (2006) Extraction of essential oils from jasmine flower using solvent extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Kamirul Nizam, Ngah@Omar (2006) The effect of pH and biomass concentration on lead (Pb) adsorption by Saccharomyces cerevisiae from simulated waste water. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Mohd. Nazip, Kassebullah (2006) Production of cellulase enzyme from Aspergillus terreues SUK-1 using sugar cane waste : the effect of substrate concentration and assay temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Rosli, Ramly (2006) Extraction of gaharu essential oil using microwave assisted extraction (MAE). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Azree, Mat Said (2006) Comparison for selection technique in genetic algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Faizal, Zainal Abidin (2006) The development of home made appratus for the production of biodiesel from new cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

N

Nasita, Ibrahim (2006) Implementation of automation controller using electro-pneumatic & PLC for food processing. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nasly, Mohamed Ali and Zakaria, Zahrizan (2006) Web based information model : electronic maintenance outline system (e-MOST) as a tool to support maintenance and operations management at Pejabat Pembangunan dan Pengurusan Harta, Kolej Universiti Kejuruteraan dan Teknologi Malaysia. , [Research Report] (Unpublished)

Nazeri, Nasaruddin (2006) Extraction of pharmacologically active thymoquinone in nigella sativa L. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Az Amin, Nik Abdul Aziz (2006) Effect of different shear rate on membrane performance on pes asymmetric membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Adilah, Md Arifin (2006) Development of filtering system for the production of biodiesel from used cooking oil. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Noor Amiza, Amiril (2006) Optimization of essential oil extraction from zingiber officinale. Facutly Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Asma Fazli, Abdul Samad and Arshad, Ahmad (2006) Comparison Product Optimization Performance of Fed-batch Fermentation Processes for Penicillin G Production. In: Proceedings of the 1 st International Conference on Natural Resources Engineering & Technology 2006 , 24-25 July 2014 , Putrajaya. pp. 562-575.. (Published)

Noor Hazira, Abu Bakar (2006) Study on mechanical pretreatment process of palm oil mill effluent (POME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Raha, Mohd Radzuan and Fatimah, Ali and Kassim, Hafizoah and Hashim, Haslinda and Najah, Osman and Ramle, Abid (2006) Developing speaking skills module for engineering students. , [Research Report] (Unpublished)

Nor Hanimah, Hamidi (2006) Effect of different biomass concentration on biological pretreatment to chemical pulping process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hazlila, Basiran (2006) Extraction of alpha-tocopherol from corn. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Maniha, Abd Ghani (2006) Active steering for vehicle system using sliding mode control. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norbaya, Mat Rani (2006) The study of hydrogen production using photosynthetic bacteria rhodospirillum rubrum. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Norfarihan, Ramli (2006) On-board recharging system for portable battery operated vehicle : an investigation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norhalmy, Mohd Nor (2006) Production of cellulose enzyme from aspergillus niger using sugarcane bagasse; the effect of substrate concentration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhayati, Abu Bakar (2006) The treatment of oil palm empty fruit bunch fiber for subsequent use as substrate for cellulase production by aspergillus terreus suk-1. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Norhayati, Mat Noor (2006) Development of pick and place system using IRB 1400 robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norlidiyana, Tabroni (2006) Online appointment application system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Norulshahida, Che Din (2006) Extraction of essential oils from jasmine flower using supercritical co2 co-solvent extraction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farhana, Ghazali (2006) Study of vanilla essential oil extraction : comparison through heat and wave principles. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Hamizah, Baharan (2006) Analysis of partial least square estimation process and control of distillation column process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

P

Paridah, Mohd Ali and Haslinda, Hashim (2006) Program Raksi Sebagai Wadah Penerapan Nilai-Nilai Murni Di KUKTEM. In: National Student Development Conference (NASDEC 2006) , 8-9 August 2006 , Kuala Lumpur, Malaysia. pp. 1-9.. (Published)

Pettrus, Akun (2006) The effect of biosurfactant in solving of petrochemical industry wastewater treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Praventhran, Janardanan (2006) Screening of starch degrader from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

R

Ramalingan, Sivaganasan (2006) An access control for KUKTEM wired LAN AC spot. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Retnam, Parameswary (2006) Electronic stethoscope. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .

Riduan, Abd. Ghani (2006) Effects of temperature in reactive distillation of vapor from catalytic pentaerythritol tetradodecanoate (petd) reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosyusjuliza, Yusoff (2006) Prototype of student degree classification. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Roziyah, Abdul Razak (2006) Student information retrieval using Geographical Information System. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

S

Saflida, Mohd Nor (2006) Fuzzy logic controller simulation for water tank level control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Shahbudin, Sobki (2006) Crystallization characteristic of pentaerythritol tetralaurate (PETD). Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang.

Shahril, Mohamad (2006) Optimization of hydro distillation conditions for the production of essential oil from Alpinia galanga. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahrizal, Ramli (2006) Analysis of gaharu essential oil GC/GCMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahrulnizam, Jamen (2006) Effects of temperature in reactive distillation of vapor from non-catalytic pentaerythritol tetradodecanoate (petd) reactor. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Sharifah Nhatasha, Syed Jaafar (2006) Adsorption study - dye removal using clay. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aishah, Mustafa (2006) Comparative studies on the purification process of bioethanol from rice husks. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nur Nadzmiah, Mohd Nor (2006) The effect of different hydraulic retention tim (HRT) on biological pretreatment to chemical pulping. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Sarrah, Ridzuan (2006) Wastewater treatment using combination of stainless steel membrane and adsorption system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

W

Wan Mohd Hidayat, Wan Abdullah (2006) Development of gas density measurement model (tank) based on principal component analysis (PCA) technique. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norlinda Roshana, Mohd Nawi (2006) Preliminary study on parameters of lysozyme purification using ion exchange chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wong, Yih Tin (2006) Study of acrylamide formation in coffee during roasting. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Y

Yeoh, Teik Loon (2006) Screening of lignin degrader from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yusoff, Wan Azhar (2006) Open architecture pc-based CNC controller. , [Research Report] (Unpublished)

Z

Zaini, Hajar Hadyan Hani (2006) Bioethanol production from empty fruit bunch (EFB) of oil palm. Faculty of Chemical & Natural Reources Engineering, Universiti Malaysia Pahang.

Zaleha, Salleh (2006) Development of wireless data transnmission using 8051 microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Zuraina, Ali and Haslinda, Hashim (2006) Berfikir Secara Kritis Melalui Pengajaran Kesusasteraan Bahasa Inggeris di Kalangan Pelajar Tahun 3 di KUKTEM. In: National Student Development Conference (NASDEC 2006) , 8-9 August 2006 , Kuala Lumpur, Malaysia. pp. 1-6.. (Published)