Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53 . pp. 701-706. ISSN 1877-7058

[img]
Preview
PDF
Available under License Creative Commons Attribution Non-commercial No Derivatives.

642Kb

Official URL: http://dx.doi.org/10.1016/j.proeng.2013.02.091

Abstract

Biodiesel and its alcohol blend fuels are considered as alternatives to current fossilized fuels. Their fuel physical characteristics are among the most important parameter to determine the quality of each fuel. Strict procedures are used in observation and measurement to obtain the flash point, viscosity, density, acid value and Cetane number in order to define the actual properties of biodiesel and its alcohol blend fuels. These obtained properties are very beneficial to be used in any arithmetical simulation for further findings. These properties provide good explanations on how the engine operates with those fuels in terms of performance, combustion and emission characteristics. Biodiesel and its alcohol blend fuels analysis were conducted in UMP Chemical laboratory using different analytical apparatus including viscosity bath, acid value & acidity tester, density meter and bomb calorimeter. Properties comparison were been made between mineral diesel, B100, B20 and B20 alcohol blend fuels. The results show that the presence of alcohol helps to reduce the viscosity and density of biodiesel concentration when blending with mineral diesel. On other hand, a significant increase in Cetane number as a result of an increase in alcohol concentration in the biodiesel blend fuels. However, the properties of biodiesel and its alcohol blend fuels still meet the requirement of EN14214.

Item Type:Article
Uncontrolled Keywords:Biodiesel; Palm-diesel; Alcohol; Additives; Fuel properties
Subjects:T Technology > TP Chemical technology
T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Chemical & Natural Resources Engineering
Faculty of Mechanical Engineering
ID Code:6194
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:30 Apr 2015 15:17
Last Modified:23 Jan 2018 14:04

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my