Optimization of hollow fiber-supported liquid membrane operating parameters for levulinic acid separation: Modeling and experimental investigation

Rajendaren, Vikneswary and Syed Mohd Saufi, Tuan Chik and Mior Ahmad Khushairi, Mohd Zahari (2024) Optimization of hollow fiber-supported liquid membrane operating parameters for levulinic acid separation: Modeling and experimental investigation. Journal of Water Process Engineering, 58 (104927). pp. 1-9. ISSN 2214-7144. (Published)

[img]
Preview
Pdf
Optimization of hollow fiber-supported liquid membrane operating parameters_ABST.pdf

Download (257kB) | Preview
[img] Pdf
Optimization of hollow fiber-supported liquid membrane operating parameters.pdf
Restricted to Repository staff only

Download (1MB) | Request a copy

Abstract

Hollow fiber-supported liquid membrane (HFSLM) is a highly promising technology for the separation of levulinic acid (LA), which is one of the leading biomass products. This process is particularly advantageous for industrial-scale applications due to its capability for continuous extraction and back extraction within a single operational device. This study employed HFSLM for the extraction of LA from an aqueous solution. To optimize HFSLM performance, response surface methodology with central composite face-centered (CCF) design was used to fine-tune three key factors: the concentration of trioctylamine (TOA) as a carrier, the concentration of sodium hydroxide (NaOH) as a stripping agent, and the concentration of LA in the feed solution. The ideal operating conditions for HFSLM were determined to be 0.32 M TOA, 0.77 M NaOH, and 10.08 g/L LA, resulting in the highest LA extraction efficiency of 74.82 % ± 3.83 %. The study also investigated the mass transfer mechanisms within the HFSLM system. Key parameters such as the extraction equilibrium constant (Kex), stripping equilibrium constant (Kst), distribution ratio (D), aqueous mass transfer coefficient (kf), and membrane mass transfer coefficient (km) were determined. The km value, measured at 5.1012 × 10−3 cm/s, exceeded the kf value of 0.6613 × 10−3 cm/s, indicating that the rate-limiting step in LA transport occurred during its diffusion through the film layer separating the feed and organic phases. A new mathematical diffusion flux model focusing on the extraction side of the liquid membrane system was developed to estimate the concentration of LA at different times. The model offers valuable insights into the transport mechanisms during LA extraction using HFSLM and can serve as a benchmark for integrating HFSLM into actual biomass processing.

Item Type: Article
Uncontrolled Keywords: Hollow fiber-supported liquid membrane; Levulinic acid; Response surface methodology; Mass transfer; Mathematical diffusion flux model
Subjects: Q Science > QD Chemistry
T Technology > TP Chemical technology
Faculty/Division: Institute of Postgraduate Studies
Faculty of Chemical and Process Engineering Technology
Depositing User: Mrs Norsaini Abdul Samat
Date Deposited: 20 Jun 2024 07:36
Last Modified: 20 Jun 2024 07:36
URI: http://umpir.ump.edu.my/id/eprint/41635
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item