Items where Author is "A. R., Razali"

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2021) A new piston referencing algorithm for qualitative assessment of free-piston engine generator performance. In: Lecture Notes in Mechanical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 935-948., 46. ISSN 2195-4356 (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Influence of polymer coated aggregate on the aggregate impact and crushing value. In: International Postgraduate Conference on Mechanical Engineering , 19th-20th January 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012039). ISSN 1757-899X (Published)

Jafa, J. and S. M., Anissuzaman and Chiam, C. K. and Bolong, N. and A. R., Razali and A. F., Ismail and N. M., Ismail (2020) Effect of surface-etched modification on halloysite nanotubes (HNTs) for polysulfone mixed matrix membrane in CO2/CH4 separation. In: IOP Conference Series: Materials Science and Engineering, 26th Regional Symposium on Chemical Engineering (RSCE 2019) , 30 Oktober-1 November 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 778 (012163). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Noor Maizura, Ismail and Nur Afaliza, Yusaini and Jannah, Jafa and S. M., Anisuzzaman and Chiam, Chel Ken and Nurmin, Bolong and A. R., Razali and Ahmad Fauzi, Ismail (2020) Carbon dioxide/methane separation performance by mixed matrix membrane from polysulfone/ halloysite nanotubes. Jurnal Teknologi (Sciences and Engineering), 82 (3). pp. 91-100. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2020) Flexible valve timing strategies for boosting a small four-stroke spark ignition engine performance. Small Engine Technology Conference & Exposition (SETC2019). pp. 1-8. ISSN 2019-32-0591. (Published)

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

A. F., Ahmad and A. R., Razali and Intan Suhana, Mohd Razelan and W. A. H. W., Hamizan (2019) Effect of waste polyethylene terephthalate (PET) on properties of road aggregate. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012056). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Mohmad Sairaji, Muhamad Imran and A. R., Razali and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak and Ospina, Alejandro and Lanfranchi, Vincent (2018) Preliminary thermal evaluation of actuator for steer-by-wire vehicle. IEEE Transactions on Vehicular Technology, 67 (12). pp. 11468-11474. ISSN 0018-9545. (Published)

Wan Mohd Nafis, Wan Lezaini and Addie Irawan, Hashim and A. R., Razali (2018) Impedance control approach on leg motion speed variation on soft surface interaction. International Journal of Engineering & Technology, 7 (4.27). pp. 1-6. ISSN 2227-524X. (Published)

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Maximum power point tracking analysis of a coreless ironless electric generator for renewable energy application. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981 (Published)

A. R., Razali and F. R. M., Romlay and Syaiful, Azlan and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Open circuit V-I characteristics of a coreless ironless electric generator for low density wind power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-7., 342 (1). ISSN 1757-8981 (Published)

A. R., Razali and F. R. M., Romlay and Leong, Yap Wee and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Performance and optimum characteristics by finite element analysis of a coreless ironless electric generator for low wind density power generation. In: AIP Conference Proceedings: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 1757-8981 (Published)

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) V-I characteristics of a coreless ironless electric generator in a closed-circuit mode for low wind density power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-6., 342 (1). ISSN 1757-8981 (Published)

Addie Irawan, Hashim and M. Aqeel, Yaacob and A. R., Razali and Sheikh Norhasmadi, Sheikh Ali and Farah Adiba, Azman and Mohd Razali, Daud (2018) Vision-based alignment control for mini forklift system in confine area operation. In: IEEE 3rd International Symposium on Agents, Multi-Agent Systems and Robotics (ISAMSR 2018) , 27 August 2018 , Putrajaya, Malaysia. pp. 1-6.. ISBN 978-1-5386-7856-5 (Published)

Mohd Razali, Hanipah and A. R., Razali (2017) The numerical assessment of motion strategies for integrated linear motor during starting of a free-piston engine generator. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012054). ISSN 1757-8981 (Published)

A. R., Razali and C. T., Ann and A. F., Ahmad and Nazrul Idzham, Kasim (2017) Finite element structural analysis of a low energy micro sheet forming machine concept design. In: Mechanical Engineering Science And Technology 2017 , 19-20 April 2017 , Politeknik Metro, Johor Bahru. pp. 1-6., 203 (1). ISSN 17578981 (Unpublished) (Unpublished)

Wan Mohd Nafis, Wan Lezaini and Addie Irawan, Hashim and A. R., Razali and Abdul Hamid, Adom (2017) Hybrid Antiwindup-Fuzzy Logic Control for an Underactuated Robot Leg Precision Motion. In: 3rd IEEE International Symposium in Robotics and Manufacturing Automation (ROMA 2017) , 19-21 September 2017 , Universiti Putra Malaysia, Malaysia. , 2017. (Published)

A. F., Ahmad and A. R., Razali and I. S. M., Razelan (2017) Utilization of Polyethylene Terephthalate (PET) in Asphalt Pavement: A Review. In: IOP Conference Series: Materials Science and Engineering, Mechanical Engineering, Science and Technology International Conference , 19-20 April 2017 , Johor Bahru, Johor, Malaysia. pp. 1-7., 203 (012004). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

A. F., Ahmad and A. R., Razali and I. S. M., Razelan and S. S. A., Jalil and M. S. M., Noh and A. A., Idris (2017) Utilization of Polyethylene Terephthalate (PET) in Bituminous Mixture for Improved Performance of Roads. In: IOP Conference Series: Materials Science and Engineering, Mechanical Engineering, Science and Tech nology International Conference , 19-20 April 2017 , Johor Bahru, Johor, Malaysia. pp. 1-11., 203 (012005). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Norsharimie, Adam and Mohd, Aiman and Wan Mohd, Nafis and Addie Irawan, Hashim and Mohamad, Muaz and Mohamad, Hafiz and A. R., Razali and Sheikh Norhasmadi, Sheikh Ali (2016) Omnidirectional Configuration and Control Approach on Mini Heavy Loaded Forklift Autonomous Guided Vehicle. In: MATEC Web of Conferences: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01077). ISSN 2261-236X (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Preliminary Studies on Number of Coil Turns per Phase and Distance between the Magnet Pairs for AFPM Ironless Electricity Generator. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38. ISSN 2261-236X (Published)

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles. MATEC Web of Conferences, 38 (02002). pp. 1-11. ISSN 2261-236X. (Published)

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608. (Published)

Addie Irawan, Hashim and A. R., Razali and Wan Faizal, Wan Ishak and Mohd Rizal, Arshad and Tan, Yee Yin (2015) Development of Hexaquad Robot: Modeling and Framework. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17506-17513. ISSN 1819-6608. (Published)

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482. (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished) (Unpublished)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

C. T., Ann and A. R., Razali and N. A. I., Zainudin and Y. W., Leong (2015) Size Effects in Thin Sheet Metal Forming. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L. H., Shah and N. F., Zainal Ariffin and A. R., Razali (2014) Application of Taguchi Optimization Technique on Dissimilar AA6061-AA7075 Friction Stir Welding. In: World Virtual Conference on Advanced Research in Materials & Engineering Applications , 22-26 September 2014 , Kuala Lumpur. . (Unpublished) (Unpublished)

Mohd Azam, Musa and A. R., Razali and Nazrul Idzham, Kasim (2014) Grain and Feature Size Effect on Material Behavior for Micro-Sheet-Forming. Applied Mechanics and Materials, 680. pp. 77-80. ISSN 1662-7482. (Published)

Nazrul Idzham, Kasim and A. R., Razali and Mohd Azam, Musa (2014) Positional Accuracy Based on a Load Identification Optimization on a Linear Motor Sheet Forming Feeder. Applied Mechanics and Materials, 680. pp. 311-314. ISSN 1662-7482. (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished) (Unpublished)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. R., Razali and Qin, Yi (2013) A Review on Micro-manufacturing, Micro-forming and Their Key Issues. Procedia Engineering, 53. pp. 665-672. ISSN 1877-7058. (Published)

A. R., Razali (2004) Vehicle color glossiness study using SPC in an automotive manufacturing company. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).