Items where Author is "F. R. M., Romlay"

Article

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

M. S. M., Ghazali and F. R. M., Romlay and A. A., Ehsan (2021) Manufacturing of polymer-based 1×2 Y-branch symmetric and asymmetric waveguide coupler through moulding technique. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8998 -9005. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and F. R. M., Romlay and M., Jusop (2018) Optimization of travelling salesman problem with precedence constraint using modified GA encoding. Advanced Science Letters, 24 (2). pp. 1484-1487. ISSN 1936-6612. (Published)

W. S., Wan Harun and R. I. M., Asri and F. R. M., Romlay and S., Sharif and N. H. M., Jan and F., Tsumori (2018) Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel. Journal of Alloys and Compounds, 748. pp. 1044-1052. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

M. F. M., Sunif and F. R. M., Romlay (2017) Travelling Wave Rotary Ultrasonic Motor with Novel Hollow Segments Stator. International Journal of Control Theory and Applications, 10 (3). pp. 277-282. ISSN 0974-5572. (Published)

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohamad Zairi, Baharom and Priyandoko, Gigih and F. R. M., Romlay and M. S. M., Sani and M. S., Salleh and M. H. M., Yusof (2015) Voltage Induced Effect for Vibration Suppression Using Eddy Current on Power Steering System. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7482-7487. ISSN 1819-6608. (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

F. R. M., Romlay and M. E., Wahab and M. I. A., Halim and M. H. M., Saad (2008) Failure Analyse Prediction of Bolts Component Using Probality Method. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 59-66. ISSN 1985-5176. (Published)

F. R. M., Romlay (2008) Modeling Of A Surface Contact Stress For Spur Gear Mechanism Using Static And Transient Finite Element Method. Journal of Structural Durability & Health Monitoring (SDHM), Tech Science Press, 4 (1). pp. 19-27. ISSN 1930-2983. (Published)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Modeling of a Surface Contact Stress for a Gear System Using Finite Element Method. SDHM: Structural Durability & Health Monitoring, 4 (1). pp. 19-28. ISSN 1930-2983 (Print); 1930-2991 (Online). (Published)

Conference or Workshop Item

Mogan, J. and Sandanamsamy, L. and Wan Sharuzi, Wan Harun and Ismayuzri, Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy (2024) Thermo-mechanical properties of ABS/stainless steel composite using FDM. In: Materials Today: Proceedings. Materials Today: Proceedings; Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Virtual, Online. pp. 1-6.. ISSN 2214-7853 (In Press / Online First) (In Press / Online First)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Influence of polymer coated aggregate on the aggregate impact and crushing value. In: International Postgraduate Conference on Mechanical Engineering , 19th-20th January 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012039). ISSN 1757-899X (Published)

Mohd Noor Firdaus, Haron and F. R. M., Romlay (2019) Parametric study of laser engraving process of AISI 304 Stainless Steel by utilizing fiber laser system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012124). (Published)

F. A., Adnan and F. R. M., Romlay and Nasir, Shafiq (2018) Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 17578981 (Published)

Faeiz Azizi, Adnan and F. R. M., Romlay (2018) Contour generation algorithm for Projection Mask Stereolithography 3D printing process. In: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8.. (Published)

Mohd Fathuddin, Mohd Sunif and Mohd Noor Firdaus, Haron and F. R. M., Romlay (2018) Heat energy modelling of travelling wave piezoceramic ultrasonic motor. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (01009). ISSN 2261-236X (Published)

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Maximum power point tracking analysis of a coreless ironless electric generator for renewable energy application. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981 (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2018) Numerical Investigation of Continuous Damping of The Semi-Active Suspension System for Passenger Car. In: The International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) , 12-13 December 2018 , Penang, Malaysia. pp. 1-11.. (Published)

A. R., Razali and F. R. M., Romlay and Syaiful, Azlan and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Open circuit V-I characteristics of a coreless ironless electric generator for low density wind power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-7., 342 (1). ISSN 1757-8981 (Published)

A. R., Razali and F. R. M., Romlay and Leong, Yap Wee and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Performance and optimum characteristics by finite element analysis of a coreless ironless electric generator for low wind density power generation. In: AIP Conference Proceedings: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 1757-8981 (Published)

Kamal Arifin, Mat Piah and Wan Azhar, Wan Yusoff and Nur Iffah, Mohamed Azmi and F. R. M., Romlay (2018) Pso-based PID speed control of traveling wave ultrasonic motor under temperature disturbance. In: IOP Conference Series: Materials Science and Engineering, Asia Pacific Conference On Manufacturing Systems And International Manufacturing Engineering Conference 2017 , 7-8 Disember 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-899X (online) (Published)

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) V-I characteristics of a coreless ironless electric generator in a closed-circuit mode for low wind density power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-6., 342 (1). ISSN 1757-8981 (Published)

F. R. M., Romlay and Mohd Shafiq, Mat Ghazali and Luqman, Ismail (2017) Design and Fabrication of Polymer-Based Asymmetric Waveguide Coupler Utilizing Injection Moulding Process. In: Proceedings of 3rd National Conference on Knowledge Transfer , 30 November - 1 December 2016 , Penang, Malaysia. pp. 99-102.. ISBN 978-967-394-283-1 (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay (2017) Effect of Fiber Laser Parameters on Laser Welded AZ31B Magnesium Alloys. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12., 90 (01032). ISSN 2261-236X (Published)

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Nur Iffah, Mohamed Azmi and Kamal Arifin, Mat Piah and Wan Azhar, Wan Yusoff and F. R. M., Romlay (2017) Optimization of PID Parameters Utilizing Variable Weight Grey-Taguchi Method and Particle Swarm Optimization. In: The 4th Asia Pacific Conference on Manufacturing Systems and The 3rd International Manufacturing Engineering Conference (APCOMS-IMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished) (Unpublished)

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin Wax Removal from Metal Injection Moulded Cocrmo Alloy Compact by Solvent Debinding Process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012020). ISSN 1757-899X (Published)

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin wax removal from metal injection moulded cocrmo alloy compact by solvent debinding process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012020). ISSN 1757-8981 (Published)

M., Ishak and A. S. K., Razali and N. F. M., Noordin and L. H. A., Shah and F. R. M., Romlay (2015) The Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas (TIG). In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. , 11 (1). ISSN 22298649 (Published)

M., Ishak and M. N. M., Salleh and F. R. M., Romlay (2015) A Study on Bead on Plate Welding of AA7075 By Low Power Fiber Laser. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Machine Parameter Optimization For Wire-Electric Discharge Machining. In: International Conference on International Conference on Computational & Experimental Engineering and Sciences (ICCES 2008) , 17-21 March 2008 , Honolulu Hawaii, USA. pp. 139-144., 8 (4). ISSN 1933-2815 (online) (Published)

M. M., Noor and M. R. M., Rejab and K., Kadirgama and F. R. M., Romlay and R., Daud (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of the 2nd Regional Engineering Conference on Sustainable Engineering Infrastructures Development and Management , 18-19 December 2008 , Kuching, Sarawak. pp. 33-38.. (Published)

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6.. (Published)

F. R. M., Romlay (2007) Integrated Of Stepper And Dc Motor Control System Using Microcontroller For Automatic Dishwasher. In: Conference on Product Design 2007 , 10-11 December 2007. , Batu Ferenggi, Penang, Malaysia,. . (Unpublished) (Unpublished)

F. R. M., Romlay and Asmizam, Mokhtar (2007) Optimization Of A Cutting Process For Wire-Electric Discharge Machining At Welding Joint. In: Conference on Product Design 2007 , 10-11 December 2007 , Batu Ferenggi, Penang, Malaysia. . (Unpublished) (Unpublished)

F. R. M., Romlay (2007) Penerapan 100% Konsep Pembelajaran Berpusatkan Pelajar (SCL) Dalam Pengajaran di FKM. In: Engineering Education Conference , 3 May 2007 , M.S.Garden Hotel, Kuantan, Pahang. . (Unpublished) (Unpublished)

F. R. M., Romlay and M. S. M., Sani (2006) Model Modification Of Wira Center Member Bar. In: Regional Conference in Vehicle Engineering & Technology (Rivet 2006) , 3-5 July 2006 , Kuala Lumpur, Malaysia. . (Unpublished) (Unpublished)

F. R. M., Romlay and Wan Azhar, Wan Yusoff (2006) Modeling Of Gear Mechanism Using Transient Finite Element Method. In: Regional Conference on Computational Mechanics & Numerical Analysis (CMNA 2006) , 12-14 May 2006 , Banda Acheh, Indonesia. . (Unpublished) (Unpublished)

F. R. M., Romlay and A. K., Ariffin and Nik Abdullah, Nik Mohamed and Nor, M. J. M. (2004) Monte Carlo Method in Modeling Fatigue Crack Propagation On A Center Member Bar. In: The 5th Regional Seminar On Computational Mechanics And Numerical Analysis , 5 June 2004 , Banda Aceh, Indonesia . . (Unpublished) (Unpublished)

Thesis

F. R. M., Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).