Items where Author is "L. H., Shah"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 45.

Article

G. Q., Huang and J., Wu and W. T., Hou and L. H., Shah and A. R. H., Midawi and A. P., Gerlich and Y. F., Shen and F. Q., Meng (2021) Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing. Materials Science and Engineering: A, 806 (140831). pp. 1-14. ISSN 0921-5093. (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

Hou, Wentao and L. H., Shah and Huang, Guoqiang and Shen, Yifu and Gerlich, Adrian (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. Journal of Alloys and Compounds, 825 (154045). pp. 1-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

L. H., Shah and A., Gerlich and Y., Zhou. (2018) Design Guideline for Intermetallic Compound Mitigation in Al-Mg Dissimilar Welding through Addition of Interlayer. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 2667-2678. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

L. H., Shah and Guo, Shihui and Walbridge, Scott and Gerlich, Adrian (2017) Effect of Tool Eccentricity on the Properties of Friction Stir Welded AA6061 Aluminum Alloys. Manufacturing Letters, 15. pp. 14-17. ISSN 2213-8463. (Published)

L. H., Shah and Nurul Hidayah, Othman and Gerlich, Adrian (2017) Review of Research Progress on Aluminum-Magnesium Dissimilar Friction Stir Welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

Khodabakhshi, F. and Marzbanrad, B. and L. H., Shah and Jahed, H. and Gerlich, A. P. (2017) Friction-Stir Processing of a Cold Sprayed AA7075 Coating Layer on the AZ31B Substrate: Structural Homogeneity, Microstructures and Hardness. Surface and Coatings Technology, 331. pp. 116-128. ISSN 0257-8972. (Published)

Nurul Hidayah, Othman and Norsyahfiana, Abdul Razak and L. H., Shah and M., Ishak (2016) Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding. Key Engineering Materials, 701. pp. 154-158. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nurul Hidayah, Othman and N., Udin and M., Ishak and L. H., Shah (2016) Effect of Taper Pin Ratio on Microstructure and Mechanical Property of Friction Stir Welded AZ31 Magnesium Alloy. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 586-589. ISSN 1307-6892. (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nur Fakhriah, Mohd Noordin and M., Ishak and L. H., Shah (2016) Prediction and Optimization of Process Parameters on Metal Inert Gas of Dissimilar Aluminium Alloy AA6061-T6 and AA7075-T6 using Response Surface Method Analysis. Key Engineering Materials, 701. pp. 143-147. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER4043 and ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG). Jurnal Teknologi (Sciences and Engineering), 75 (7). pp. 79-84. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and L. H., Shah and I. S. R., Aisha and W., Hafizi and M. R., Islam (2014) Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 793-806. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and L. H., Shah (2014) Review of Research Progress on Aluminum-Steel Dissimilar Welding. Materials and Manufacturing Processes. pp. 1-24. ISSN 1042-6914 (print); 1532-2475 (online). (Published)

L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online). (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Mohd Anwar, Zawawi and L. H., Shah (2012) H-Infinity Controller Based on LMI Region for Flexible Robot Manipulator. Research Journal of Applied Sciences, 7 (5). pp. 275-281. ISSN 1815-932X. (Published)

L. H., Shah and Bun, T. and Nagata, S. and Shikama, T. (2012) The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 713-721. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

L. H., Shah and Tsuchiya, B. and Nagata, S. and Shikama, T. (2011) The Effect of Gamma-rays on the Electrical Properties of Zr55Ni5Al10Cu30 Bulk Metallic Glass. Journal of Nuclear Materials, 417 (1-3). pp. 822-825. ISSN 0022-3115. (Published)

Book Chapter

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

Conference or Workshop Item

N. H., Othman and M., Ishak and L. H., Shah (2017) Effect of shoulder to pin ratio on magnesium alloy Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-9., 238 (1). ISSN 17578981

Mohd Rushdi, Mohamad and L. H., Shah and M., Ishak (2017) Investigation of Preheating Method on Joint Strength of Aluminium-Stainless Steel Dissimilar Welding Using Metal Inert Gas (MIG) Process. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-9., 238. ISSN 1757-8981 (Print), 1757-899X (Online)

Ummu Kulthum, Jamaludin and Fatimah, Dzaharudin and Normy Norfiza, A. Razak and L. H., Shah and W. Zuhriraihan, W. M. Zulkifly and Fatanah, M. Suhaimi and Azrina, Md. Ralib and Mohd Basri, Mat Nor and Christopher, G. Pretty (2017) Performance of STAR Virtual Trials for Diabetic and Non-Diabetic in HTAA Intensive Care Unit. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES) , 4-8 December 2016 , Kuala Lumpur. pp. 193-198.. ISBN 9781467377911

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished)

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohamed, Mohamed Ackiel and Manurung, Yupiter HP and L. H., Shah and Nurul Hidayah, Othman (2015) Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding. In: 68th IW International Conference High-Strength Materials , 2-3 July 2015 , Helsinki, Finland. pp. 1-8..

L. H., Shah and N. F., Zainal Ariffin and A. R., Razali (2014) Application of Taguchi Optimization Technique on Dissimilar AA6061-AA7075 Friction Stir Welding. In: World Virtual Conference on Advanced Research in Materials & Engineering Applications , 22-26 September 2014 , Kuala Lumpur. . (Unpublished)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Tezara, C. (2014) Experimental Investigations And Study Corrosion Model Of Welded 6061 Aluminium Exposed In Marine Environment. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-9..

L. H., Shah and N. F., Zainal Ariffin (2014) Process Parameter Optimization for Friction Stir Welding of AA6061 and AA7075. In: 10th International Friction Stir Welding Symposium , 20-22 Mei 2014 , Beijing, China. pp. 1-7.. (Unpublished)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

Muhamad Arifpin, Mansor and L. H., Shah and Hazami, Che Hussain (2012) Maintenance Performance of Malaysia's Automotive Sector: A Case Study. In: Proceedings of International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 271-275..

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. .

This list was generated on Fri Mar 29 06:02:40 2024 +08.