Items where Author is "R. A., Bakar"
 | Up a level |
Article
R. A., Bakar and Widudo, . and K., Kadirgama and D., Ramasamy and Yusaf, Talal and M. K., Kamarulzaman and Sivaraos, . and Aslfattahi, Navid and Samylingam, L. and Alwayzy, Sadam H. (2024) Experimental analysis on the performance, combustion/emission characteristics of a DI diesel engine using hydrogen in dual fuel mode. International Journal of Hydrogen Energy, 52. 843 -860. ISSN 0360-3199. (Published)
Munir Afnan, Mukhtar and R. A., Bakar and Mohd Farid, Zainudin (2021) Thermodynamic analysis of a gamma-configuration stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 114-126. ISSN 2289-7879. (Published)
Gundabattini, Edison and Kuppan, Ravi and Solomon, Darius Gnanaraj and Kalam, Akhtar and Kothari, D. P. and R. A., Bakar (2021) A review on methods of finding losses and cooling methods to increase efficiency of electric machines. Ain Shams Engineering Journal, 12 (1). pp. 497-505. ISSN 2090-4479. (Published)
F., Wasbari and R. A., Bakar and Gan, L. M. and M. A., Salim and N. A., Hamid and Herawan, S. G. (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14 (Special Issues). pp. 413-428. ISSN 1997-4434. (Published)
Faizil, Wasbari and R. A., Bakar and Gan, Leong Ming and Mohd Azli, Salim and Mohamad Firdaus, Sukri and Hairol Nizam, Mohd Shah and Safarudin Gazali, Herawan (2020) The effects of multiple energy storage on the capacity and performance of hydro-pneumatic driveline. International Journal Nanoelectronics and Materials, 13 (ISSTE 2019). 233-246]. ISSN 1985-5761 (print); 2232-1535 (online). (Published)
Abdalla, Ahmed N. and R. A., Bakar and Tao, Hai and Ramasamy, D. and K., Kadirgama and Fooj, Benedict and Tarlochan, F. and Sivaraos, S. (2020) Effect of swirl at intake manifold on engine performance using ethanol fuel blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (1). pp. 73-88. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)
Adnan M., Husein and Dawood, H. K. and R. A., Bakar and K., Kadirgama (2017) Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System. Case Studies in Thermal Engineering, 9. pp. 72-78. ISSN 2214-157X. (Published)
Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2017) Modeling of Temperature and Aifflow Pattern In a Refrigerator. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3054-3060. ISSN 1819-6608. (Published)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and Musthafah, M. T. and A. A., Yusof (2017) A Review of Compressed-air Hybrid Technology in Vehicle System. Renewable and Sustainable Energy Reviews, 67. pp. 935-953. ISSN 1364-0321. (Published)
Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2016) Development of a Complete Single Jet Common Rail Injection System Gas Dynamic Model for Hydrogen Fueled Engine with Port Injection Feeding System. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (6). pp. 976-984. (Published)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. A., Salim (2016) Feasibility Studies on Utilization of Low-Pressure in Hydro-pneumatic Driveline. Journal of Engineering and Technology (JET), 7 (2). pp. 28-42. ISSN 2180-3811. (Published)
M., Hussein Adnan and R. A., Bakar and K., Kadirgama and K. V., Sharma (2016) Heat Transfer Enhancement with Elliptical Tube Under Turbulent Flow Tio2-Water Nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 2334-7163. (Published)
Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659. (Published)
Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2016) Predicting Airflow and Temperature Pattern Inside A Refrigerator Through CFD. ARPN Journal of Engineering and Applied Sciences, 11 (14). 8621 -8628. ISSN 1819-6608. (Published)
Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2015) Computational Analysis of Thermal Building in a No-uniform Thermal Environment. Energy Procedia, 68. pp. 438-445. ISSN 1876-6102 . (Published)
S. J., Teoh and R. A., Bakar and Gan, Leong Ming and Mustika, Yasti (2015) Conceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric Motorcycle. Applied Mechanics and Materials, 699. pp. 1-8. ISSN 1662-7482. (Published)
Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Tanti Zanariah, Shamshir Ali and Billy, Anak Sup (2015) Design and Stress Simulation of Crankshaft for Slider Crank-Drive Stirling Engine. Applied Mechanics and Materials, 699. pp. 678-683. ISSN 1662-7482. (Published)
Gan, Leong Ming and Law, Hoon Chit and R. A., Bakar (2015) Development of a Briquetting Facility with the Integration of a Hydraulic System for Biomass Densification. Energy and Sustainability V: Special Contributions, 206. pp. 335-345. ISSN 1743-3541. (Published)
Billy, Anak Sup and Mohd Farid, Zainudin and Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming (2015) Effect of Rim Angle to the Flux Distribution Diameter in Solar Parabolic Dish Collector. Energy Procedia, 68. pp. 45-52. ISSN 1876-6102 . (Published)
Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Shamshir, Ali and Farrah Wahida, Mustafar (2015) The Impact of Thermal History on Buildings Occupants’ Thermal Assessments in Air-Conditioned Office Buildings. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 159-168. ISSN 2289-6260. (Published)
R. A., Bakar and Ammar Alfaiz, M. A. and Musthafah, M. T. and M. Shahir, Ali and Abdul, Muhaimin (2015) New Design of a Low Cost Small Engine Dynamometer for Engine Testing. Applied Mechanics and Materials, 699. pp. 642-647. ISSN 1662-7482. (Published)
R. A., Bakar and Musthafah, Mohd Tahir and M. S., Ali and M. A., Salim and A. M., Fudhail and M. Z., Hassan and M. S., Abdul Muhaimin (2015) Performance Analysis of a Spark Ignition Engine using Compressed Natural Gas (CNG) as Fuel. Energy Procedia, 68. pp. 355-362. ISSN 1876-6102 . (Published)
R. A., Bakar and Tanti, Ali and Billy, Anak Sup and Mohd Farid, Zainudin and Gan, Leong Ming (2015) Study on Thermal-fluid Effect of Thermal Energy Storage Tank Design in Solar Energy Applications. Energy Procedia, 68. pp. 3-11. ISSN 1876-6102 . (Published)
Tanti, Ali and Norfadzilah, Jusoh and R. A., Bakar and Teoh, S. J. and K., Kadirgama (2015) Thermal Effect of Thermal Energy Storage (TES) Tank for Solar Energy Application During Charging Cycle Based on the Grid Sensitivity Analysis. Energy Procedia, 79. pp. 245-251. ISSN 1876-6102 . (Published)
D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482. (Published)
Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2014) An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1695-1708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Mahendran, Moorthy and Tanti Zanariah, Shamshir Ali and Shahrani, Anuar and R. A., Bakar (2014) The Efficiency Enhancement on the Direct Flow Evacuated Tube Solar Collector Using Water-Based Titanium Oxide Nanofluids. Applied Mechanics and Materials, 465-46. pp. 308-315. ISSN 1662-7482. (Published)
K., Kadirgama and A. K., Amiruddin and R. A., Bakar (2014) Estimation Of Solar Radiation By Artificial Networks: East Coast Malaysia. Energy Procedia, 52. pp. 383-388. ISSN 1876-6102 . (Published)
Billy, Anak Sup and Tanti Zanariah, Shamshir Ali and Mohd Farid, Zainudin and R. A., Bakar (2014) Experimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate Collector. Applied Mechanics and Materials, 660. pp. 709-713. ISSN 1662-7482. (Published)
M., Adnan Hussein and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2014) Heat Transfer Augmentation of a Car Radiator using Nanofluids. Heat and Mass Transfer, 50 (11). pp. 1553-1561. ISSN 0947-7411(Print); 1432-1181(Online). (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) Heat Transfer Enhancement Using Nanofluids in an Automotive Cooling System. International Communications in Heat and Mass Transfer, 53. pp. 195-202. ISSN 0735-1933. (Published)
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Investigation of Excessive Material on Insulating Properties Using Different Heat Transfer Fluid for Thermal Energy Storage Development. Journal of Energy and Power Engineering, 8 (10). pp. 1673-1679. ISSN 1934-8975 (print); 1934-8983 (online). (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) A Review of Forced Convection Heat Transfer Enhancement and Hydrodynamic Characteristics of a Nanofluid. Renewable and Sustainable Energy Reviews, 29. pp. 734-743. ISSN 1364-0321. (Published)
Muhammad Syahir, Ali and M. T., Musthafah and A. M., Mohd Shafie and R. A., Bakar (2014) Simulation of Single Cylinder Engine Fuel with Alternative Fuel by Using Available Software. International Review of Mechanical Engineering (IREME), 8 (4). pp. 798-802. ISSN 1970-8734. (Published)
K., Kadirgama and R. A., Bakar and Hussein, Adnan M. (2014) Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System. Case Studies in Thermal Engineering, 2. pp. 50-61. ISSN 2214-157X. (Published)
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Study on Potential Waste Insulating Material Properties in Water for Thermal Storage Application. Advanced Materials Research, 903. pp. 139-144. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
W. B., Santoso and R. A., Bakar and Nur, A. (2013) Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load. Energy Procedia, 32. pp. 3-10. ISSN 1876-6102 . (Published)
K., Kadirgama and Adnan, M. Husein and Sharma, Korada Viswanatha and R. A., Bakar (2013) The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow. International Communications in Heat and Mass Transfer, 47. pp. 49-55. ISSN 0735-1933. (Published)
Hamada, Khalaf I. and M. M., Rahman and M. A., Abdullah and R. A., Bakar and A. Rashid, A. Aziz (2013) Effect of Mixture Strength and Injection Timing on Combustion Characteristics of a Direct Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 0360-3199. (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2013) The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube. Journal of Nanomaterials, 2013. pp. 1-12. ISSN 1687-4110 (print); 1687-4129 (online). (Published)
Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online). (Published)
M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248. (Published)
K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163. (Published)
Widodo Budi, Santoso and R. A., Bakar and Sugeng, Ariyono and Nur, Cholis (2012) Study of Cyclic Variability in Diesel-Hydrogen Dual Fuel Engine Combustion. International Journal of Mechanical & Mechatronics Engineering, 12 (4). pp. 52-56. ISSN 2077-124X. (Published)
K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248. (Published)
Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academy of Science, Engineering and Technology, 74. ISSN 2010-3778. (Published)
M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654. (Published)
Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)
M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680. (Published)
M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680. (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680. (Published)
Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2). (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3). (Published)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)
M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248. (Published)
M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin and S., Abdullah and M. A., Maleque (2009) Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach. American Journal of Applied Sciences, 6 (4). pp. 715-725. ISSN 1546-9239. (Published)
M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin (2009) Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading. American Journal of Applied Sciences, 6 (4). pp. 726-735. ISSN 1546-9239. (Published)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and J. M., Julie (2009) Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach. American Journal of Applied Sciences, 6 (1). pp. 137-142. ISSN 1546-9239. (Published)
K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Fourth Order Torque Prediction Model in End Milling. Journal of Applied Sciences, 9 (13). pp. 2431-2437. ISSN 1812-5654. (Published)
R. A., Bakar and Kwan, Teck Heng (2008) Analysis of Air Flow in Intake System Using Computational Fluid Dynamics. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 75-92. ISSN 1985-5176. (Published)
M. M., Rahman and R. A., Bakar (2008) Assessment of Fatigue Life Behaviour of Cylinder Block for Free Piston Engine Using Frequency Response Approach. Research Journal of Applied Sciences, 3 (1). pp. 32-34. ISSN 1815-932X. (Published)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. R. M., Rejab and M. S. M., Sani (2008) Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach. European Journal of Scientific Research, 22 (3). pp. 444-456. ISSN ISSN 1450-216X. (Published)
M. M., Rahman and R. A., Bakar and A. K., Ariffin and Ummu Kulthum, Jamaludin and C. H. C., Haron (2008) Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting Using Frequency Response Approach. European Journal of Scientific Research, 22 (4). pp. 480-493. ISSN ISSN 1450-216X. (Published)
M. M., Rahman and M. M., Noor and R. A., Bakar and M. A., Maleque and A. K., Ariffin (2008) Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach. Journal of Applied Sciences , 8 (19). pp. 3316-3327. ISSN 1812-5654. (Published)
R. A., Bakar and Gan, Leong Ming and Wong, Hong Mun and D., Ramasamy and Mohd Fazli, Ismail (2008) Intelligent Height and Reach Adjustable Electronic Chair for Children with Dwarfism (ZUMP). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 47-58. ISSN 1985-5176. (Published)
M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2008) An Investigation into the Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure Based on Fea. Research Journal of Applied Sciences, 3 (1). pp. 10-15. ISSN 1815-932X. (Published)
R. A., Bakar and Mohamad Fatasya, Othman and Asnul Hadi, Ahmad (2008) The Trends of Research in Compressed Natural Gas (CNG) Pressure Vessel Technology: An Overview. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 23-36. ISSN 1985-5176. (Published)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and R. A., Bakar and Abdullah, Ibrahim (2000) Education Reform Model at Faculty of Mechanical Engineering, Universiti Malaysia Pahang. International Journal of Recent Trends in Engineering, 1 (5). (Published)
Book Chapter
R. A., Bakar and L. M., Gan and M. M., Tahir and A. A., Yusof (2017) Pre-charge pressure effects on isothermal and adiabatic energy storage capacity for dual hybrid hydro-pneumatic passenger car driveline. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 3-4. ISBN 9789670257884 (Unpublished)
Adnun , M. Hussein and K., Kadirgama and D., Rarnasarny and R. A., Bakar (2017) Heat Transfer Enhancement with Nanofluids for Automotive Cooling. In: Engineering Applications of Nanotechnology: From Energy to Drug Delivery (Topics in Mining, Metallurgy and Materials Engineering). Springer, pp. 71-100. ISBN 978-3-319-29759-0
Conference or Workshop Item
Ng, X. H. and R. A., Bakar and Kadirgama, Kumaran and Sivaraos, . and D., Ramasamy and Mahendran, Samykano (2023) The performance of beta type stirling engine using different fuel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 89-110.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)
Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and R. A., Bakar (2019) Numerical study of dual fuel engine using proportional natural gas split injection. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Mechanical Engineering (ICOME2019) , 28-29 August 2019 , Yogyakarta, Indonesia. pp. 1-5., 2187 (020018). ISSN 0094-243X ISBN 978-0-7354-1934-6 (Published)
Siti Sabariah, M. and Syafiqah Nabilah, A. S. and R. A., Bakar and Junaidi, Z. Z. and Mustafar, M. T. (2019) Analysis and simulation of combustion and emission on small engine. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Mohd Farid, Zainudin and R. A., Bakar and K., Kadirgama (2019) Effects of phase angle setting, displacement, and eccentricity ratio based on determination of rhombic-drive primary geometrical parameters in beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012047). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single hole direct injector simulation validation and parametric sensitivity study. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 788 (0120635th). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Mohd Farid, Zainudin and R. M., Faiz and R. A., Bakar and K., Kadirgama (2019) Thermodynamic performance prediction of rhombic-drive beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012048). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Nurziana Kong, Johan Kong and R. A., Bakar and Lim Yi, Leang and Mohd Adnin, Hamidi (2019) The analysis of wind blade on the performance of vertical axis wind turbine (VAWT). In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. F., Sukri and H. N. M., Shah (2018) The effects of multiple storages on performance of hydro-pneumatic hybrid driveline. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 277-278.. ISBN 9789672145202 (Published)
M. N., Harith and R. A., Bakar and D., Ramasamy and K., Kadirgama and Ma, Quanjin (2018) A study of waste and delivery valve design modification to the pump performance. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-12., 342 (012090). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof and N. M., Daud and T., Ali (2017) Comparison of hydro-pneumatic accumulator's charging performance under different thermal process for dual hybrid driveline. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-10., 257 (1). ISSN 17578981 (Published)
R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2017) Effect on Human Metabolic Rate of Skin Temperature In An Office Occupant. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01070). ISSN 2261-236X (Published)
Tanti, Ali and R. A., Bakar and Gan, Leong Ming and Zarina, Amat Jafar (2017) Investigation of Passenger Car using Macpherson Strut for Suspension System pt.1: Vehicle Behaviour Variation of Time Response. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01072). ISSN 2261-236X (Published)
R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Musthafah, Mohd Tahir (2016) Experimental Study on Skin Temperature of People in Office Activities at Different Air Temperatures. In: Engineering Technology International Conference 2016 , 4-5 August 2016 , Ho Chi Minh City, Vietnam. . (Unpublished) (Unpublished)
Tanti, Ali and R. A., Bakar and Gan, Leong Ming (2016) Investigation of Passenger Car Using Macpherson Strut for Front Suspension System PT.1: Vehicle Behavior Variation of Time Response. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished) (Unpublished)
M. S., Ali and M. T., Musthafah and A. M., Mohd Shafei and A. M. T., Khairil and N. F. M., Noordin and R. A., Bakar (2016) Performance of Compressed Natural Gas (CNG) Engine with Pre Chamber. In: Proceedings of Mechanical Engineering Research Day 2016 , 31 March 2016 , Universiti Teknikal Malaysia Melaka. pp. 7-8.. ISBN 978-967-0257-70-9 (online) (Published)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof (2016) Simulation of Storage Performance on Hydro-Pneumatic Driveline. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-15.. (Published)
F., Wasbari and R. A., Bakar and Gan, Leong Ming and Ahmad Anas, Yusof and Zarina, Amat Jafar (2016) Simulation of Storage Performance on Hydropneumatic Driveline in Dual Hybrid Hydraulic Passenger Car. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01052). ISSN 2261-236X (Published)
R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and T. Z. S., Ali (2016) Study on Effect of Human Metabolic Rate on Skin Temperature in Office Environment. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished) (Unpublished)
Abdul Aziz, Mohd Azoddein and R. A., Bakar and Nik Meriam, Nik Sulaiman and Ahmad Bazli, Bustary and Nur Athirah, Mohamad Basir (2015) Mercury Removal from Actual Petroleum Based Industries Wastewater by P. putida in Membrane Bioreactor. In: New Directions in Multidisciplinary Research & Practice (NDMRP 2015) , 12-13 May 2015 , Istanbul, Turkey. pp. 313-330.. (Published)
Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup (2015) Thermodynamic Cycle Evaluation of Rhombic Drive Beta-configuration Stirling Engine. In: Energy Procedia, Vol. 68, 2nd International Conference on Sustainable Energy Engineering and Application (ICSEEA 2014) , 14-15 Oktober 2014 , Bandung, Indonesia. pp. 419-428., 68. ISSN 1876-6102 (Published)
Gan, Hui Leng and Law, Hoon Chit and R. A., Bakar (2014) Development of a Newly Designed Combined Grinding Equipment. In: 5th International Conference on Energy and Sustainability , 16-18 December 2014 , Putrajaya. . (Published)
R. A., Bakar and A. M., Mohd Shafie and Musthafah, M. T. and M. S., Ali (2014) Intake Analysis On Four-Stroke Engine Using CFD. In: 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-11.. (Unpublished) (Unpublished)
Teoh, S. J. and R. A., Bakar and Gan, Leong Ming (2013) Computational Analysis on Plug-in Hybrid Electric Motorcycle Chassis. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2013) Investigation of Potential Waste Insulating Material Properties with Different Heat Transfer Fluid for Thermal Storage Application. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)
T. Z. S., Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Farid, Z. (2013) Investigation of potential waste material insulating properties at different temperature for thermal storage application. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 50 (1). ISSN 1757-899X (Published)
Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X (Published)
Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)
R. A., Bakar (2010) Design And Developmentof Actuation Part Of Piezoelectric Generator Prototyping For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . (Published)
R. A., Bakar (2010) Development Assessment Of Solar Concentrating Power System for Green Energy Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . (Published)
Gan, Leong Ming and R. A., Bakar (2010) Development Of Multi Duty Cycle Sequential Gated Pulse Frequency Generator For Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . (Published)
S.N.S, Jamaludin and R. A., Bakar (2010) Experimental Performance Testing Of The Actuation Part Of Piezoelectric Generator For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)
Fakir, Md Moslemuddin and M. M., Rahman and R. A., Bakar and S., Basri (2010) One-Dimensional Heat Transfer in a Convection-Tip Rectangular Thin Fin: A Comparative Study. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 12-22.. ISBN 978-967-0120-04-1 (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)
M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and R. A., Bakar (2009) Artificial Intelligent Model to Predict Surface Roughness in Laser Machining. In: International Conference on Recent Advances in Materials, Minerals & Environment (RAMM’09), , 1-3 June 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. . (Published)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
M. M., Rahman and R. A., Bakar (2009) Effect of Air Fuel Ratio on Engine Performance of Single Cylinder Port Injection Hydrogen Fueled Engine: A Numerical Study. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. . (Published)
K., Kadirgama and M. M., Noor and M. S. M., Sani and R. A., Bakar and A., Ibrahim (2009) The Effect of the Foundation Subject to the Final Year Subject. In: International Journal Conference in Recent Trends in Mechanical Engineering (IJCRTME09) , 24-26 Apr 2009 , Trivandrum, Kerala, India.. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished) (Unpublished)
M. M., Noor and T. T., Mon and K., Kadirgama and R. A., Bakar (2009) Finite Element Analysis on Thermal Effect of the Vehicle Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and M. R. M., Rejab (2009) Finite Element Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished) (Unpublished)
M. M., Rahman and M. M., Noor and R. A., Bakar and K., Kadirgama (2009) Modeling and Engine Performance of Direct Injection Hydrogen Fueled Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
D., Ramasamy and R. A., Bakar and Mohd Fadzil, Abdul Rahim and M. M., Noor (2008) Comparative Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design Using Simulation And Experimental Techniques. In: Proceedings of the 4th IASTED International Conference, Power And Energy Systems (AsiaPES 2008) , 2-4 April 2008 , Langkawi, Malaysia. pp. 359-362.. (Published)
R. A., Bakar and D., Ramasamy (2008) Design and Development of Hybrid Electric Vehicle Rear Diffuser. In: National Seminar Science Technology and Sosial Sciences, Malaysia, , 3-4 June, 2008 , nil. . (Unpublished) (Unpublished)
T. T., Mon and M. M., Noor and R. A., Bakar and M. R. M., Rejab (2008) Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon. In: Proceeding of International Conference on MEMS and Nanotechnology . . (Published)
M. M., Rahman and R. A., Bakar and M. S. M., Sani and M. M., Noor (2008) Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach. In: 15th International Congress on Sound and Vibration (ICSV 15) , 6-10 July 2008 , Daejeon, Korea. . (Unpublished) (Unpublished)
R. A., Bakar and Abdul Rahim, Ismail and Ismail, Ali (2007) The Comparison Of Engine Performance For Diesel And CNG Fuel Using GT-Power Software. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)
R. A., Bakar and Abdul Rahim, Ismail (2007) Development of Intake and Exhaust Stroke Flow Simulation in an Engine Cylinder Using CFD Model. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and M. R. M., Rejab (2007) Fatigue Analysis of Spot-Welded Joints using Finite Element Analysis Approach. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. . (Unpublished) (Unpublished)
R. A., Bakar and N.M.I.N, Ibrahim and M.F.A, Rahim and I., Ali (2007) Numerical Analysis of In-Cylinder Process Small Two-Stroke SI Engine. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)
Reports
Korada, Viswanatha Sharma and Azmi, W. H. and R. A., Bakar and M. M., Noor and K., Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Project Report. Universiti Malaysia Pahang. (Unpublished)