Items where Author is "Saptaji, Kushendarsyah"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 16.

Article

Tariq, Syed Qutoba and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2022) A review on peening processes and its effect on surfaces. The International Journal of Advanced Manufacturing Technology. pp. 4233-4270. ISSN 0268-3768 (Printed), 1433-3015 (online). (Published)

Saptaji, Kushendarsyah and Triawan, Farid and Sai, Tong Keong and Gebremariam, M. A. (2021) Deburring method of aluminum mould produced by milling process for microfluidic device fabrication. Indonesian Journal of Science and Technology, 6 (1). 123 -140. ISSN 2528-1410. (Published)

Saptaji, Kushendarsyah and Mebrahitom, A. and Azmir, Azhari (2018) Machining of biocompatible materials: a review. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2255-2292. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Saptaji, Kushendarsyah and Subbiah, Sathyan (2017) Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool. Procedia Engineering, 184. pp. 137-144. ISSN 1877-7058. (Published)

Prosser, M. and Johnson, M. and Saptaji, Kushendarsyah (2017) Sustainable Bauxite Mining Guidelines. Journal of Malaysian Critical Metals, 2. pp. 1-5. ISSN 0128-2557. (Published)

Saptaji, Kushendarsyah (2016) Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14225-14230. ISSN 1819-6608. (Published)

Conference or Workshop Item

Nur Aziera, Nur Aziera and Mebrahitom, A. and Azmir, Azhari and Saptaji, Kushendarsyah (2023) Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 657-663.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nazrin, Mokhtar and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2023) Surface Roughness Analysis on Sheet Metals During AWJ Machining Using Low Pressure. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 59-64.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Fatchurrohman, Nanang and Nurul Najihah Najlaa, Noor Hamdan and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah (2020) Investigation on the effect of build orientation and heat treatment on tensile strength and fracture mechanism of FDM 3D printed PLA. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 461-465.. ISBN 978-981-15-0950-6

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing , 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

Saptaji, Kushendarsyah and Subbiah, Sathyan (2016) Finite Element Study on The Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114 (012005).

Research Book Profile

Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Mohd Azmir, Mohd Azhari and Zamzuri, Hamedon and Ahmad Razlan, Yusoff and Muhammed Nafis, Osman Zahid (2020) Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling. , [Research Book Profile: Research Report] (Unpublished)

Research Report

Yusoff, A. R. and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Che Ghani, S. A. and Osman Zahid, Muhammed Nafis (2019) Suppression of chatter in high speed milling using microcontroller based speed controller by spindle speed variation method. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Azmi, W. H. and Hamedon, Zamzuri B. and Saptaji, Kushendarsyah and Osman Zahid, Muhammed Nafis and Shaharudin, Mohd Ali Hanafiah (2018) Characterization of nanocoolant for improving cooling channel design in hot press forming. , [Research Report: Research Report] (Unpublished)

This list was generated on Fri Mar 29 00:05:38 2024 +08.