Items where Author is "Zamzuri, Hamedon"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 44.

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70..

Zuhairah, Zulkfli and M. Faris, Zaidi and Fatchurrohman, Nanang and Zamzuri, Hamedon (2022) Investigation on the Effect of Machining Parameters on Mechanical Properties of Friction Stir Processed Mg–Al-Micro Al2O3 Metal Matrix Composites. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer Nature Singapore, Singapore, pp. 589-598. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Online)

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zamzuri, Hamedon and Ammar Zakwan, Abdullah and Ismayuzri, Ishak and Muhammad Hasnulhadi, Mohammad Jaafar (2022) Non-vibrate palm oil tree harvesting cutter using DC motor. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 529-535., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Mohd Azmir, Mohd Azhari and Zamzuri, Hamedon and Ahmad Razlan, Yusoff and Muhammed Nafis, Osman Zahid (2020) Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling. , [Research Book Profile: Research Report] (Unpublished)

Ismed, Iskandar and Muchamad, Oktaviandri and R., Wangsaputra and Zamzuri, Hamedon (2019) Competing risk models in reliability systems, an Exponential distribution model with Gamma prior distribution, a Bayesian analysis approach. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 335-341.. ISBN 978-981-15-0950-6

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853

Zamzuri, Hamedon and I., Razemi and Ahmad Rosli, Abdul Manaf and Nafrizuan, Mat Yahya (2018) Innovative method of measuring electrode wear during EDM drilling process using vision system. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 53-63. ISBN 9789811087875

Mebrahitom, A. and Nur Amalina, Sabuan and Azmir, Azhari and Zamzuri, Hamedon and Tamiru Alemu, Lemma (2018) Microstructural and process characterization on the electrical conductivity and electrical discharge machinability of Al2O3-based ceramic composites. In: Advanced Energy Materials (AEM2018) Conference , 10 - 12 September 2018 , University of Surrey, England. p. 1.. (Unpublished)

Zamzuri, Hamedon and Yohei, Abe and Ken-Ichiro, Mori and Naoya, Nakagawa (2018) Thickened holes edge including compressed rollover for improving tensile fatigue strength of thick sheet. In: Metal Forming 2018, 17th International Conference On Metal Forming , 16 -19 September 2018 , Loisir Hotel Toyohashi, Toyohashi, Japan. pp. 1-7..

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Zamzuri, Hamedon and Shea, Cheng Kuang and Hasnulhadi, Jaafar and Azmir, Azhari (2018) Optimization of surface roughness and wall thickness in dieless incremental forming of aluminum sheet using taguchi. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 17578981

M., Murugan and Mebrahitom, A. and Azmir, Azhari and Zamzuri, Hamedon (2018) Performance analysis of abrasive waterjet machining process at low pressure. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2018) Improving Quality of Light Commercial Vehicle Using PDCA Approach. Journal of Advanced Manufacturing Technology, 12 (1). pp. 525-533. ISSN 2289-8107. (Published)

Zamzuri, Hamedon and Azmir, Azhari and A. R., Yusoff (2018) In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System. Journal of Advanced Manufacturing Technology, 12 (1). pp. 513-524. ISSN 2289-8107. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2017) Bits Reduction in the Electrodeposition Process of a Pickup Truck – A case study. Jordan Journal of Mechanical and Industrial Engineering, 11 (1). pp. 27-33. ISSN 1995-6665. (Published)

Ali, Mohammed A. H. and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Musa, Mailah (2017) Global Mobile Robot Path Planning using Laser Simulator. In: International Symposium on Robotics and Manufacturing Automation (ROMA) 2016 , 25-27 September 2016 , Ipoh, Perak. . ISBN 9781509009282

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2017) An Intelligent Robust Control of Wheeled Mobile Robot in Restricted Environment. International Journal of Control Systems and Robotics, 2. pp. 6-11. ISSN 2367-8917. (Published)

Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished)

Y., Mohd Syafiq and Zamzuri, Hamedon and Wan Azila, Aziz and A. R., Yusoff (2017) Prevention of Crack In Stretch Flanging Process Using Hot Stamping Technique. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257. ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Norhana, Selamat and Nik Hisyamudin, Muhd Nor and Muhammad Hanif, Abdul Rashid and Mohd Fauzi, Ahmad and Fariza, Mohamad and Al Emran, Ismail and Mohd Fahrul, Hassan and Faiz, Mohd Turan and Zamzuri, Hamedon and Elmi, Abu Bakar and Seiji, Yokoyama (2017) Review of CO2 Reduction Technologies using Mineral Carbonation of Iron and Steel Making Slag in Malaysia. In: Journal of Physics: Conference Series, International Conference on Materials Physics and Mechanics 2017 , 23 July 2017 , Langkawi, Malaysia. pp. 1-14., 914 (012012). ISSN 1742-6596

Azmir, Azhari and Zamzuri, Hamedon and Mebrahitom, A. (2017) A study on Wire Breakage in Electrical Discharge Machining of Polyurethane Foam. In: Materials Today: Proceedings, 6th International Conference of Materials Processing and Characterization (ICMPC 2016) , 5-7 December 2016 , Hyderabad, India. pp. 5222-5227., 4 (4). ISSN 2214-7853

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Zamzuri, Hamedon and Rabbi, M. F. and Tasriva, Sikandar and Palaniappan, Rajkumar and Ali, Md. Asraf and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2016) Fuzzy Logic Controller Design for Intelligent Drilling System. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , Shah Alam, Malaysia. pp. 208-213.. ISBN 978-1-5090-4186-2 (In Press / Online First)

A. S. A., Sani and F. J. P., Sousa and Zamzuri, Hamedon and Azmir, Azhari (2016) Contact Pressure Distribution During the Polishing Process of Ceramic Tiles: A Laboratory Investigation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-19., 114 (012008). ISSN 1757-8981 (Print), 1757-899X (Online)

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Zamzuri, Hamedon and Razemi, M. N. I. and Azmir, Azhari and A. R., Yusoff (2016) In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System. In: 5th International Conference On Design And Concurrent Engineering (IDECON 2016) , 18-21 September 2016 , Langkawi, Malaysia. pp. 1-5.. (Unpublished)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2016) Mechatronic Design and Development of an Autonomous Mobile Robotics System for Road Mark Painting. In: 15th International Conference on Circuits, Systems, Electronics, Control and Signal Processing , 14-18 April 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Zamzuri, Hamedon (2016) Multi-Axial Clamp Assemble. In: The Invention & New Product Exposition (INPEX) 2016 , 7-9 June 2016 , Pittsburgh, United States of America. p. 1..

Mohd Syafiq, Yusoff and Zamzuri, Hamedon (2016) Prevention of Springback of High Strength Steel Sheet in L-Bending Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 398-403..

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan and Ismed, Iskandar (2016) Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Anwar, P. P. Abdul Majeed (2016) Sensors Fusion based Online Mapping and Features Extraction of Mobile Robot in the Road Following and Roundabout. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Zamzuri, Hamedon (2014) In-situ measurement and formability improvement in stamping of high strength steel and titanium alloy sheets. PhD thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei (2014) Hemming for Joining High Strength Steel Sheets. Procedia Engineering: The Engineering of Sport 10, 81. pp. 2074-2079. ISSN 1877-7058. (Published)

Zamzuri, Hamedon and Mori, K. and Abe, Y. (2014) In-situ Measurement of Three-dimensional Deformation Behaviour of Sheet and Tools During Stamping Using Borescope. Journal of Materials Processing Technology, 214 (4). pp. 945-950. ISSN 0924-0136. (Published)

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei and Watanabe, Saharu (2014) Prevention of Wrinkling in Shrink Flanging of Ultra-High Strength Steel Sheets Using Gradually Contacting Punch. Journal of the Japan Society for Technology of Plasticity, 55 (639). pp. 341-345. (Published)

Zamzuri, Hamedon and Mon, Thet Thet and S., Sharif and Venkatesh, V. C. and A. R. M., Masri and Sue-Rynley, Anak Emley (2011) Performance of nitrogen gas as a coolant in machining of titanium. Advanced Materials Research, 264-265. pp. 962-966. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zamzuri, Hamedon and M. S. M., Sani (2009) Characterization Of The Response Of Synthetic Bone Substitute To Compressive Load. In: AUN/SEED-Net Regional Conference 2009 , 16 -17 February 2009 , Equatorial Hotel Penang, Malaysia. . (Unpublished)

Zamzuri, Hamedon and Siti Haryani, Tomadi and M. M., Noor and M. N. O., Zahid (2008) Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit. In: Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit , 16~17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

Zamzuri, Hamedon and M. Nafis, O. Z. and Z., Ghazalli and M. M., Noor (2008) Design, Fabrication and Testing of New Invented Spring Sickle Pole "ZappIt®" for Palm Harvesting. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

Z., Ghazalli and M. M., Noor and Zamzuri, Hamedon (2008) Development of Conceptual Technique by Using Integrated Approaches. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur.. .

M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

This list was generated on Sun May 19 22:51:50 2024 +08.