Browse by Author All List

A

Amir, Aziz and Atiqah, Nisfun and R., Mamat and Ahmad Fitri, Yusop and Najafi, G. (2016) Properties of Biodiesel Derived from Vegetable Oil, Animal Fat and Waste Cooking Oil. In: 6th International Conference On “Engineering & Technology, Computer, Basic & Applied Sciences-ECBA , 29-30 July 2016 , Osaka Japan. pp. 1-6.. (Unpublished) (Unpublished)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482. (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah and Amir, Aziz (2014) Comparative Study of Particulate Matter (PM) Emissions in Diesel Engine Using Diesel-Methanol Blends. Applied Mechanics and Materials, 465-46. pp. 1255-1261. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Mohd Hafizil, Mat Yasin (2014) Effect of Ambient Temperature on the Performance of a Diesel Engine Operating with Biofuel. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. . (Published)

Amir, Aziz and Asraf, Jusoh and R., Mamat and Abdul Adam, Abdullah (2014) Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel. Applied Mechanics and Materials, 465 (466). pp. 191-195. ISSN 1662-7482. (Published)

Amir, Aziz and Ahmad Fitri, Yusop and R., Mamat (2014) Engine Performance and Emission of Emulsified Biodiesel. In: 3rd International Conference on Machine Design and Manufacturing Engineering (ICMDME 2014) , 24-25 may 2014 , Jeju Island, South Korea. pp. 1-6.. (Unpublished) (Unpublished)

Amir, Aziz and Wong, Chung Siong and R., Mamat and Hagos, F. Y. (2014) Exhaust Emissions Reduction Of Diesel Engine Fueled With Emulsified Palm Oil Methyl Esters. Applied Mechanics and Materials, 660. pp. 457-461. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482. (Published)

Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Low Pressure Strand Burner for Solid Propellant Burning Rate Studies. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Development of Strand Burner for Solid Propellant Burning Rate Studies. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013) . pp. 1-8.. (Published)

Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53. pp. 530-535. ISSN 1877-7058. (Published)

Amir, Aziz and R., Mamat and Amin, Makeen and Wan Khairuddin, Wan Ali (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012023). ISSN 1757-899X (Published)

H

Hagos, Ftwi Yohaness and Rizalman, Mamat and Abdul Adam, Abdullah and Amir, Aziz and Omer, Ahmed Nurye and Abd. Rashid, Abd. Aziz (2015) Investigation of micro-explosion phenomenon in the combustion of tri-fuel (diesel, biodiesel and bioethanol) emulsion in compression ignition engines. , [Research Book Profile: Research Report] (Unpublished)

I

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished) (Unpublished)

M

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohammad Hafizi, Jamaluddin and R., Mamat and Amir, Aziz and M. M., Noor and Ahmad Tamimi, Ahmad Termizi (2017) Development of Strand Burner Test by Using Aluminized AP/HTPB. In: 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, pp. 99-104. ISBN 9783038357445

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Amir, Aziz and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) An Experimental Determination of Thermal Conductivity and Viscosity of BioGlycol/water based TiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 22-32. ISSN 0735-1933. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Amir, Aziz and G., Najafi (2015) Comparative Study on Biodiesel-Methanol-Diesel Low Proportion Blends Operating with a Diesel Engine. Energy Procedia, 75. pp. 10-16. ISSN 1876-6102 . (Published)

M., Ishak and Amir, Aziz and Asnul Hadi, Ahmad (2014) Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (1). pp. 289-295. ISSN 1974-9821. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop (2013) Cyclic Variations of Combustion Characteristics in Diesel Engine Operating With B20 Blends with Alcohol Additives. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53. pp. 701-706. ISSN 1877-7058. (Published)

S

Shafiq, Suhaimi and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Nik Rosli, Abdullah (2014) Investigation of Intake Flow Rate and Swirl Motion of Sl engine. Applied Mechanics and Materials, 465-46. pp. 409-417. ISSN 1662-7482. (Published)

X

Xu, Leilei and Treacy, Mark and Zhang, Yan and Amir, Aziz and Tunér, Martin and Bai, Xue Song (2022) Comparison of efficiency and emission characteristics in a direct-injection compression ignition engine fuelled with iso-octane and methanol under low temperature combustion conditions. Applied Energy, 312 (118714). pp. 1-14. ISSN 0306-2619. (Published)

Z

Z. M., Hafizi and M. M., Noor and R., Mamat and Amir, Aziz and A. T., Termizi (2018) Finite element analysis of strand burner. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Intelligent Manufacturing & Mechatronics . Springer Singapore, Singapore, pp. 705-714. ISBN 9789811087875