Browse by Author All List

C

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Investigation of wear performance of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1740-1744., 46 (169722). ISSN 2214-7853 (Published)

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Morphological study of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1745-1748., 46 (169722). ISSN 2214-7853 (Published)

F

Fatchurrohman, Nanang and Jun, Hew Xiao and Muhida, Rifki and Adelino, Muhammad Ilham (2021) Performance simulation of bio-reinforced composite car door panel using finite element analysis. In: Proceedings - 2nd International Conference on Computer Science and Engineering: The Effects of the Digital World After Pandemic (EDWAP), IC2SE 2021. 2nd International Conference on Computer Science and Engineering, IC2SE 2021 , 16 - 18 November 2021 , Padang. pp. 1-5.. ISBN 978-166540045-9 (Published)

Fatchurrohman, Nanang and Nurul Najihah Najlaa, Noor Hamdan and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah (2020) Investigation on the effect of build orientation and heat treatment on tensile strength and fracture mechanism of FDM 3D printed PLA. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 461-465.. ISBN 978-981-15-0950-6 (Published)

Fatchurrohman, Nanang and Azriee, Abdullah (2018) Surface roughness and wear properties of Al–Al2O3 metal matrix composites fabricated using friction stir processing. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 155-160. ISBN 9789811087875

F. M., Fakharuddin and Fatchurrohman, Nanang and S., Puteh and H. M. A. R., Puteri (2018) A prototype for communitising technology: development of a smart salt water desalination device. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7., 342 (1). ISSN 1757-8981 (Published)

Fatchurrohman, Nanang and F.M., Fakharuddin and S., Puteh and H., Puteri (2018) A prototype for communitizing technology: development of smart salt water desalination device. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 01-02 March 2018 , UMP Pekan, Pahang. p. 1., 342 (1). ISSN 17578981 (Published)

Fatchurrohman, Nanang and Farhana, N. and Marini, C. D. (2017) Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012032). ISSN 1757-899X (Published)

Fatchurrohman, Nanang and S. T., Chia (2017) Performance Of Hybrid Nano-Micro Reinforced Magnesium Composites Brake Calliper: Simulation Approach. In: 4th International Conference On Mechanical Engineering Research (ICMER 2017) , 1-2 August 2017 , Swiss Garden, Kuantan.. pp. 1-7., 257 (1). ISSN 17578981 (Published)

Fatchurrohman, Nanang and S., Sulaiman (2017) Solidification analysis in permanent mould casting of aluminium alloy LM6 reinforced titanium carbide particulates metal matrix composites. In: 5th International Conference on Engineering and Innovative Materials (ICEIM 2016) , 10-12 September 2016 , Kuala Lumpur. pp. 148-151., 889. ISBN 9783038357704 (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman (2016) Solidification Analysis of Aluminium 11.8% Silicon Alloy Reinforced With Titanium Carbide Particulates Produced Using Vortex Mixing - Permanent Mould Casting. In: 10th International Materials Technology Conference & Exhibition (IMTCE 2016) , 16-18 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. . ISSN 2325-0887 (Unpublished) (Unpublished)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Fatchurrohman, Nanang and Marini, C. D. and Suraya, Sulaiman and Iqbal, AKM Asif (2015) Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2014) Implementation of Concurrent Engineering and Analytical Network Process In Manufacturing Process and Material Analysis of Metal Matrix Composites Automotive Component. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10.. (Published)

Fatchurrohman, Nanang and Ismed, Iskandar and Suraya, Sulaiman and Kartina, Johan (2014) Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component. Applied Mechanics and Materials, 695. pp. 32-35. ISSN 1662-7482. (Published)

M

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Investigation of wear performance of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1740-1744. ISSN 2214-7853. (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Morphological study of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1745-1748. ISSN 2214-7853. (Published)

Marini, C. D. and Fatchurrohman, Nanang (2018) Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-4.. (Unpublished) (Unpublished)

Marini, C. D. and Fatchurrohman, Nanang and Azmir, Azhari and Suraya, Sulaiman (2016) Product Development using QFD, MCDM and the Combination of these Two Methods. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Marini, C. D. and Fatchurrohman, Nanang (2015) A Review On The Fabrication Techniques Of Aluminium Matrix Nanocomposites. Jurnal Teknologi (Sciences and Engineering), 74 (10). pp. 103-109. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

N

N., Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2021) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-9., 700 (1). ISSN 1755-1307 (Published)

N, Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2020) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. IOP Conference Series: Earth and Environmental Science, 700. pp. 1-9. ISSN 1755-1307(Print); 1755-1315(Online). (Published)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Mohammad Asaduzzaman, Chowdhury and A. K. M., Asif Iqbal and Noor Mazni, Ismail and Fatchurrohman, Nanang and Chan, Shin Yi (2020) Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 466-471.. ISBN 978-981-15-0950-6 (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Chowdhury, M. A. and Rahman, N. A. N. A. and Oumer, A. N. and Fatchurrohman, Nanang and Iqbal, A. K. M. A. and N. M., Ismail (2018) Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

S

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing , 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X (Published)

Suraya, Sulaiman and M. D., Azman and Fatchurrohman, Nanang and Abdul Aziz, Jaafar and A. R., Yusoff (2016) Simulation on the Effect of Bottle Wall Thickness Distribution using Blow Moulding Technique. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (012004). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Z

Zuhairah, Zulkfli and M. Faris, Zaidi and Fatchurrohman, Nanang and Zamzuri, Hamedon (2022) Investigation on the Effect of Machining Parameters on Mechanical Properties of Friction Stir Processed Mg–Al-Micro Al2O3 Metal Matrix Composites. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer Nature Singapore, Singapore, pp. 589-598. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Online)

Z., Zulkfli and Fatchurrohman, Nanang (2021) Advancement in friction stir processing on magnesium alloys. IOP Conference Series: Materials Science and Engineering, 1092 (012006). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)