Browse by Author All List

A

Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14.. (Published)

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2). (Published)

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished) (Unpublished)

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished) (Unpublished)

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5.. (Published)

B

Benedict, F. and K., Kadirgama and D., Ramasamy and M. M., Noor and Kumar, M. Asok Raj and M. M., Rahman and Sagmesh, B. (2018) Thermal management of vehicle radiator by nanocellulose with one-dimensional analysis. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020043). ISBN 978-0-7354-1787-8 (Published)

C

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952. (Published)

D

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853 (Published)

D., Ramasamy and K., Mohanesen and R., Maria and Mahendran, Samykano and K., Kadirgama and M. M., Rahman (2020) Analysis of alumina particles size and shape formation from developed planetary ball mill. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052032). ISSN 1757-899X (Published)

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished) (Unpublished)

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted) (Submitted)

D., Ramasamy and Kaaliarasan, Ramachandran and G., Kadirgama and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Experimental investigation and empirical model development of thermal conductivity for cellulose nanocrystal (CNC) based nanofluid. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-4.. (Unpublished) (Unpublished)

D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and Kaaliarasan, Ramachandran and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Investigation of Dynamic Viscosity Through Experiment and Correlation Determination through Response Surface Methodology for Cellulose Nanocrystal (Cnc) Dispersed in Ethylene Glycol-Water Mixture. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-3.. (Unpublished) (Unpublished)

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

D., Ramasamy and M. M., Noor and M. M., Rahman and W. G. B. , Horizon (2016) Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00031). ISSN 2261-236X (Published)

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

F

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Noor and M. M., Rahman and D., Ramasamy and Mahamude, A. S. F. (2019) CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012041). ISSN 1757-899X (Published)

Farhana, K. and Mahamude, A. S. F. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy (2019) Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012069). ISSN 1757-899X (Published)

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8 (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)

Fakir, Md Moslemuddin and M. M., Rahman and R. A., Bakar and S., Basri (2010) One-Dimensional Heat Transfer in a Convection-Tip Rectangular Thin Fin: A Comparative Study. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 12-22.. ISBN 978-967-0120-04-1 (Published)

H

Hasan, Md Munirul and Islam, M. S. and S., A. Bakar and M. M., Rahman and Kabir, M. N. (2021) Applications of artificial neural networks in engine cooling system. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 471 -476.. (Published)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished) (Unpublished)

Hamada, K. I. and Mohammed, M. K. and M. M., Rahman (2014) Development of a Test-Rig for a Modern Motorcycle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2034-2041. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hamada, K. I. and M. M., Rahman (2014) An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1852-1865. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hamada, Khalaf I. and M. M., Rahman and M. A., Abdullah and R. A., Bakar and A. Rashid, A. Aziz (2013) Effect of Mixture Strength and Injection Timing on Combustion Characteristics of a Direct Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 0360-3199. (Published)

Hamada, Khalaf I. and M. M., Rahman and A. Rashid, A. Aziz (2013) Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 0360-3199. (Published)

I

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Awad, Omar I. and M. M., Rahman and G., Najafi and F., Basrawi and R., Mamat (2017) The Optimum Performance of the Combined Cycle Power Plant: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 79. pp. 457-474. ISSN 1364-0321. (Published)

Ibrahim, Thamir K. and M. M., Rahman and F., Basrawi (2016) Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Tamir K. and M. M., Rahman (2015) Effects of Isentropic Efficiencies on the Performance of Combined Cycle Power Plants. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2914-2928. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, T. K. and M. M., Rahman (2014) Effect of Compression Ratio on the Performance of Different Strategies for the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. 1747-1757. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman (2012) Parametric study of a two-shaft gas turbine cycle model of power plant. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-13., 36 (012024). ISSN 1757-899X (Published)

Ibrahim, Thamir K. and M. M., Rahman and Abdalla, Ahmed N. (2011) Optimum gas turbine configuration for improving the performance of combined cycle power plant. Procedia Engineering, 15. pp. 4216-4223. ISSN 1877-7058. (Published)

J

J., Kananathan and K., Rajan and M., Samykano and K., Kadirgama and K., Moorthy and M. M., Rahman (2022) Preliminary Tensile Investigation of FDM Printed PLA/Coconut Wood Composite. In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 339-350., 882. ISBN 978-981-15-7309-5 (Published)

K

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

Kesavarma, Seluraju and E. H., Lee and M., Samykano and K., Kadirgama and M. M., Rahman and A. G. N., Sofiah (2020) Flextural properties of 3D printed Copper-Filler Polylactic Acid (Cu-PLA). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012051). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished) (Unpublished)

K., Mohanesen and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman (2019) Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012075). ISSN 1757-899X (Published)

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Kamal, Minhas and M. M., Rahman (2018) Advances in fatigue life modeling: A review. Renewable and Sustainable Energy Reviews, 82 (1). pp. 940-949. ISSN 1364-0321. (Published)

Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman (2017) Surface Characteristics of Ti-5Al-2.5Sn in Electrical Discharge Machining Using Negative Polarity of Electrode. The International Journal of Advanced Manufacturing Technology, 92 (1-4). pp. 1-13. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X (Published)

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2016) Development of a Complete Single Jet Common Rail Injection System Gas Dynamic Model for Hydrogen Fueled Engine with Port Injection Feeding System. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (6). pp. 976-984. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and Salehina, Zayed Us and Rahman, Md. Saifur (2016) Optimal Set-up and Surface Finish Characteristics in Electrical Discharge Machining on Ti-5al-2.5sn using Graphite. Perspectives in Science, 8. pp. 440-443. ISSN 2213-0209. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2015) An Experimental Investigation on Surface Finish in Die-Sinking EDM Of Ti-5Al-2.5Sn. The International Journal of Advanced Manufacturing Technology, 77 (9). pp. 1727-1740. ISSN 0268-3768. (Published)

Kamal, M. and M. M., Rahman (2014) Finite Element-Based Fatigue Behaviour of Springs in Automobile Suspension. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1910-1919. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1782-1792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamal, M. and M. M., Rahman (2014) Fatigue Life Estimation Models: A State of the Art. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1599-1608. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2014) An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1695-1708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K., Kadirgama and M., Yogeswaran and S., Thiruchelvam and M. M., Rahman (2014) Mathematical Modeling for Surface Roughness When Milling Aisi 304 Stainless Steel. Jokull Journal, 65 (4). pp. 1-9. ISSN 0449-0576. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Neural Network Modeling and Analysis for Surface Characteristics in Electrical Discharge Machining. Procedia Engineering, 90. pp. 631-636. ISSN 1877-7058. (Published)

K., Kadirgama and M., Yogeswaran and S. , Thiruchelvam and M. M., Rahman (2014) Prediction of Grinding Machinability when Grind P20 Tool Steel Using Water Based Zno Nano-Coolant. Jokull Journal, 66 (5). pp. 1-15. ISSN 0449-0576. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2013) Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process. International Journal of Mathematical, Computational, Physical and Quantum Engineering, 7 (11). pp. 1122-1127. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman (2013) Development of Regression Equation for Surface Finish and Analysis of Surface Integrity in EDM. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 7 (3). pp. 178-183. (Published)

K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163. (Published)

K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248. (Published)

Khalaf I., Hamada and M. M., Rahman and A. Rashid, A. Aziz (2012) Time-averaged Heat Transfer Correlation for Direct Injection Hydrogen Fueled Engine. International Journal of Hydrogen Energy, 37. pp. 19146-19157. ISSN 0360-3199. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academy of Science, Engineering and Technology, 74. ISSN 2010-3778. (Published)

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2). (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482. (Published)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)

K., Kadirgama and M. M., Noor and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Development of Genetic Algorithms and Multilayer Perceptron Neural Network (Mpnn) Model To Study The Student Performance InThermodynamics. In: International Engineering Education Conference , 16-18 May 2009 , Madinah, Kingdom of Saudi Arabia. . (Unpublished) (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished) (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and W. S., Wan Harun (2009) Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling. European Journal of Scientific Research, 30 (3). pp. 451-463. ISSN 1450-216X. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Fourth Order Torque Prediction Model in End Milling. Journal of Applied Sciences, 9 (13). pp. 2431-2437. ISSN 1812-5654. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. S. M., Sani (2009) Surface Roughness Analysis In End Milling With Response Ant Colony Optimization. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia. . (Unpublished) (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2009) Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method. European Journal of Scientific Research, 25 (2). pp. 250-256. ISSN ISSN 1450-216X. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and N. M. Zuki, N. M. and M. R. M., Rejab and B., Mohammad (2008) Design and development of blow mould using machining optimization parameters. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished) (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and R., Daud (2008) Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network. Jourdan Journal of Mechanical and Industrial Engineering, 2 (4). ISSN 1995-6665. (Published)

L

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

L. C., Wor and M. M., Rahman (2015) Stress Behavior Of Tailor-Welded Blanks For Dissimilar Metals Using Finite Element Method. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2541-2554. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) Interaction effect of machining parameters on material removal rate in machining of AA6061–T6 using MQL conditions. In: 7th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2019) , 7-11 December 2019 , RMIT University, Melbourne, Australia. pp. 1-7.. (Unpublished) (Unpublished)

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019) , 14 - 18 Julai 2019 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished) (Unpublished)

M., Azwan and M. A., Maleque and M. M., Rahman (2018) TIG torch surfacing of metallic materials - a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 1745-9192. (Published)

M. F., Fariz and C. K., Ihsan and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. T., Hoang (2018) Performance and emission characteristic of compression ignition engine using blend of diesel and canola oil. In: The 7th International Conference On Design And Concurrent Engineering 2018 (IDECON 2018) , 17-18 September 2018 , Kuching, Sarawak. pp. 1-8.. (Unpublished) (Unpublished)

M. S. A., Noman Ranak and Saiful Azad, B. M. F and Karnal, Ruhee and N. Nourin, Nisa and Nazrul, Kabir and M. M., Rahman and Kamal Z., Zamli (2018) IPTV network security: threats and countermeasures. In: IPTV delivery networks: next generation architectures for live and video on demand services. John Wiley & Sons, New Jersey, pp. 203-222. ISBN 9781119397939

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311. (Published)

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

M. M., Rahman and Kamal, M. (2017) Fatigue Life Prediction of Titanium Alloy for Block Loading Using The Hybrid Approach of Critical Plane and Continuum Damage Mechanics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 4080-4096. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Hasan and M. M., Rahman and M. Nomani, Kabir and Abdul Adam, Abdullah (2017) Numerical Study on the Combustion and Performance Characteristics of a HCCI Engine Resulting from the Autoignition of Gasoline Surrogate Fuel. Journal of Energy Engineering , 143 (5). pp. 1-10. ISSN 0733-9402. (Published)

M. M., Rahman and M. M., Hasan (2017) Performance and Emission Characteristics of Biodiesel–Diesel Blend and Environmental and Economic Impacts of Biodiesel Production: A Review. Renewable and Sustainable Energy Reviews, 74. pp. 938-948. ISSN 1364-0321. (Published)

Md. Ashikur, Rahman Khan and M. M., Rahman (2017) Surface finish characteristics of titanium alloy in a non conventional technique. In: International Conference on Recent Trends in Engineering and Material Sciences (ICEMS-2016) , 17-19 March 2016 , Jaipur, India. pp. 9352-9355., 4 (9). ISSN 2214-7853 (Published)

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981 (Published)

M. S. M., Sani and N. A. Z., Abdullah and Siti Norazila, Zahari and Siregar, J. P. and M. M., Rahman (2016) Finite Element Model Updating of Natural Fibre Reinforced Composite Structure in Structural Dynamics. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03007). ISSN 2261-236X (Published)

M. M., Rahman and Chowdhury, M. A. and Nuruzzaman, D. M. and Debnath, U. K. and Kowser, M. A. and Roy, B. K. (2016) Deposition Rates on Stainless Steel Substrates of Different Surface Roughnesses Under Different Operating Conditions using Thermal CVD. International Journal of Surface Science and Engineering, 10 (3). pp. 282-302. ISSN 1749-7868. (Published)

M. M., Hasan and M. M., Rahman (2016) Homogeneous Charge Compression Ignition Combustion: Advantages Over Compression Ignition Combustion, Challenges and Solutions. Renewable and Sustainable Energy Reviews, 57. pp. 282-291. ISSN 1364-0321. (Published)

M., Kamal and M. M., Rahman (2016) Multiaxial Fatigue Life Modelling using Hybrid Approach of Critical Plane and Genetic Algorithm. Fatigue & Fracture of Engineering Materials & Structures, 39 (4). pp. 479-490. ISSN 1460-2695. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608. (Published)

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371. (Published)

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and Izzuddin, Zaman and M. M., Rahman (2015) Analysis of Split Air Conditioner Noise using Sound Intensity Mapping. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 28-33. ISSN 2289-7879. (Published)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kaamal and M. M., Rahman (2015) Dual-Criteria Method For Determining Critical Plane Orientation For Multiaxial Fatigue Prediction Using A Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2571-2581. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Portinjection Hydrogen-Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2383-2395. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) Fatigue Life Estimation Based On Continuum Mechanics Theory With Application Of Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2586-2598. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) An Integrated Approach For Fatigue Life Estimation Based On Continuum Mechanics Theory And Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2756-2770. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Performance Prediction of Spark-Ignition Engine Running on Gasoline-hydrogen and Methane-hydrogen Blends. Applied Energy, 158. pp. 556-567. ISSN 0306-2619. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online). (Published)

M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and Ibrahim, Tamir K. (2014) Effect of the Compression Ratio on the Performance of Different Strategies of the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1747-1757. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and Azma Salwani, Ab Aziz (2014) Artificial neural network modeling of grinding of ductile cast iron using water based sio2 nanocoolant. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1649-1661. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Puvanesan and M. M., Rahman and Najiha, M. S. and K., Kadirgama (2014) Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1538-1549. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and Thamir K., Ibrahim (2014) Effective Parameters on Performance of Multipressure Combined Cycle Power Plants. Advances in Mechanical Engineering, 2014. pp. 1-13. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

M. M., Rahman and K., Kadirgama (2014) Performance of Water-Based Zinc Oxide Nanoparticle Coolant during Abrasive Grinding of Ductile Cast Iron. Journal of Nanoparticles, 2014. pp. 1-7. (Published)

Md. Ashikur, Rahman Khan and M. M., Rahman (2014) Surface Study in a Non-conventional (Electrical Discharge Machining) Process for Grade 6 Titanium Material. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 89-93. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Fatigue Life Prediction Using Simplified Endurance Function Model. Advances in Mechanical Engineering, 2013 (581754). pp. 1-12. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online). (Published)

M. M., Rahman (2012) Modeling of Machining Parameters of Ti-6Al-4V for Electric Discharge Machining: A Neural Network Approach. Scientific Research and Essay , 7 (8). pp. 881-890. ISSN 1992-2248. (Published)

M. M., Rahman and Khalaf, I. Hamada and A. Rashid, A. Aziz (2012) Characterization Of The Time-Averaged Overall Heat Transfer In A Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (11). pp. 4816-4830. ISSN 0360-3199. (Published)

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248. (Published)

Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X (Published)

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Kamal and M. M., Rahman and Abdul Ghaffar, Abdul Rahman (2012) Fatigue Life Evaluation of Suspension Knuckle Using Multibody Simulation Technique. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 291-300. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Md. Ashikur, Rahman Khan and M. M., Rahman and K., Kadirgama and A. R., Ismail (2012) RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012016). ISSN 1757-899X (Published)

M., Kamal and M. M., Rahman (2012) Study on dynamic behaviour of wishbone suspension system. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012019). ISSN 1757-899X (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman (2011) Particle Swarm Optimisation Prediction Model for Surface Roughness. International Journal of Physical Sciences, 6 (13). pp. 3082-3090. ISSN 1992-1950. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680. (Published)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)

M. M., Rahman and Hamada, Khalaf I. and K., Kadirgama (2011) Heat transfer of intake port for hydrogen fueled port injection engine: A steady state approach. International Journal of Physical Sciences, 6 (16). pp. 3969-3976. ISSN 1992-1950. (Published)

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X. (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680. (Published)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26. pp. 949-955. ISSN 1022-6680. (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online). (Published)

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman (2010) Analysis of Auto Car Jack. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 MAY 2010 , Universiti Malaysia Pahang. . (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2010) Artificial Intelligence Techniques for Machining Performance: a Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)

M. M., Rahman and Thamir K., Ibrahim (2010) Effects of Operation Conditions on Performance of a Gas Turbine Power Plant. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3). (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248. (Published)

M. M., Noor and K., Kadirgama and E. H., Jamaluddin and M. M., Rahman (2009) Method of Predicting, Estimating and Improving Mean Time between Failures in Reducing Reactive Work in Maintenance Organization. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1176-1186., 8. ISSN 1985-9325(Print); 2180-1606 (Online) (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and R. A., Bakar (2009) Artificial Intelligent Model to Predict Surface Roughness in Laser Machining. In: International Conference on Recent Advances in Materials, Minerals & Environment (RAMM’09), , 1-3 June 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. . (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin and S., Abdullah and M. A., Maleque (2009) Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach. American Journal of Applied Sciences, 6 (4). pp. 715-725. ISSN 1546-9239. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin (2009) Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading. American Journal of Applied Sciences, 6 (4). pp. 726-735. ISSN 1546-9239. (Published)

M. M., Rahman and R. A., Bakar (2009) Effect of Air Fuel Ratio on Engine Performance of Single Cylinder Port Injection Hydrogen Fueled Engine: A Numerical Study. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. . (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and T. T., Mon (2009) The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and J. M., Julie (2009) Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach. American Journal of Applied Sciences, 6 (1). pp. 137-142. ISSN 1546-9239. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and M. Y., Taib (2009) The Entry Qualifications and Gender Analysis of Student Performance by using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished) (Unpublished)

M. S. M., Sani and M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)

M. S. M., Sani and M. M., Noor and M. H. A., Rasid and M. R. M., Rejab and K., Kadirgama and M. M., Rahman (2009) Experimental Study On Noise Source Identification Of Split Unit Air Conditioner System. In: International Conference on Advance Mechanical Engineering (ICAME09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)

M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab and S. A., Kesulai (2009) Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach. European Journal of Scientific Research, 30 (3). pp. 437-450. ISSN 1450-216X. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and M. R. M., Rejab (2009) Finite Element Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished) (Unpublished)

M. R. M., Rejab and M. M., Noor and K., Kadirgama and M. M., Rahman and Z., Ahmad@Manap and M. S. M., Sani and R., Daud (2009) An Investigation of Profiles for Plate Cams with Vertical In-line Roller Followers. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)

M. S. M., Sani and M. M., Noor and M. S. M., Zainury and K., Kadirgama and M. R. M., Rejab and M. M., Rahman (2009) Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)

M. R. M., Rejab and M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2009) Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)

M. M., Rahman and M. M., Noor and R. A., Bakar and K., Kadirgama (2009) Modeling and Engine Performance of Direct Injection Hydrogen Fueled Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)

M. M., Rahman and M. R. M., Rejab and K., Kadirgama and M. M., Noor and A. K., Ariffin (2009) Multiaxial Fatigue Behavior of Cylinder Head for a Free Piston Linier Engine. Journal of Applied Sciences , 9 (15). ISSN 1812-5654. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680. (Published)

M. M., Noor and K., Kadirgama and Aidy, Ali and M. M., Rahman and Z., Ghazalli (2009) Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239 (print); 1554-3641 (online). (Published)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Student Performance Analysis Using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Tool Life Analysis By Partial Swarm Optimisation. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia.. . (Unpublished) (Unpublished)

M. M., Rahman and R. A., Bakar (2008) Assessment of Fatigue Life Behaviour of Cylinder Block for Free Piston Engine Using Frequency Response Approach. Research Journal of Applied Sciences, 3 (1). pp. 32-34. ISSN 1815-932X. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. R. M., Rejab and Z., Ghazalli and M. A., Hassan (2008) Developing a Cutting Tool with Mild Steel for Printed Circuit Board. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. . (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani (2008) Development of Auto Car Jack Using Internal Car Power. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and K., Kadirgama and G. L., Ming (2008) Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19, 2008 , Kuching, Sarawak.. . (Unpublished) (Unpublished)

M. R. M., Rejab and M. M., Rahman and K., Kadirgama and M. M., Noor (2008) Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19 , Kuching Sarawak, Malaysia. . (Published)

M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)

M. M., Rahman and A. K., Ariffin and S. M., Beden and S., Abdullah (2008) Fatigue Life Assessment for Metallic Structure: A Case Study of Shell Structure under Variable Amplitude Loading. Journal of Applied Sciences , 8 (9). pp. 1622-1631. ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. R. M., Rejab and M. S. M., Sani (2008) Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach. European Journal of Scientific Research, 22 (3). pp. 444-456. ISSN ISSN 1450-216X. (Published)

M. M., Rahman and R. A., Bakar and A. K., Ariffin and Ummu Kulthum, Jamaludin and C. H. C., Haron (2008) Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting Using Frequency Response Approach. European Journal of Scientific Research, 22 (4). pp. 480-493. ISSN ISSN 1450-216X. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and M. A., Maleque and A. K., Ariffin (2008) Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach. Journal of Applied Sciences , 8 (19). pp. 3316-3327. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and A. K., Ariffin and Ummu Kulthum, Jamaludin and S., Abdullah (2008) Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting. Journal of Applied Sciences , 9 (8). pp. 1612-1621. ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar and M. S. M., Sani and M. M., Noor (2008) Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach. In: 15th International Congress on Sound and Vibration (ICSV 15) , 6-10 July 2008 , Daejeon, Korea. . (Unpublished) (Unpublished)

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. . (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2008) An Investigation into the Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure Based on Fea. Research Journal of Applied Sciences, 3 (1). pp. 10-15. ISSN 1815-932X. (Published)

M. M., Rahman and S., Abdullah and A. K., Ariffin and N. A., Al-Asady (2008) A Review on Finite Element Analysis Approaches in Durability Assessment of Automotive Components. Journal of Applied Sciences, 8 (12). pp. 2192-2201. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and M. R. M., Rejab and M. S. M., Sani and K., Kadirgama (2008) Study Of Air Fuel Ratio On Engine Performance Of Direct Injection Hydrogen Fueled Engine. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Published)

M. S. M., Sani and M. M., Rahman and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) Study on Dynamic Characteristics of Automotive Shock Absorber System. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia . . (Unpublished) (Unpublished)

M. M., Rahman and A. K., Ariffin and S., Abdullah (2007) Finite Element Based Vibration Fatigue Analysis Of A New Two-Stroke Linear Generator Engine Component. Mechanical Engineering Research Journal, 2 (1). pp. 63-74. ISSN 1823-0334. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and M. R. M., Rejab (2007) Fatigue Analysis of Spot-Welded Joints using Finite Element Analysis Approach. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. . (Unpublished) (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and R. A., Bakar and Abdullah, Ibrahim (2000) Education Reform Model at Faculty of Mechanical Engineering, Universiti Malaysia Pahang. International Journal of Recent Trends in Engineering, 1 (5). (Published)

N

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque (2019) Preparation methods and challenges of hybrid nanofluids: A review. In: 4th International Symposium on Fluid Mechanics and Thermal Sciences (4TH IS-FMTS 2019) , 13-15 December 2019 , Palm Garden Hotel IOI Resort City, Putrajaya, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)

Norhafana, M. and M. M., Noor and Pshtiwan, M. Sharif and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012035). ISSN 1757-899X (Published)

Norhafana, M. and M. M., Noor and M. Sharif, Pshtiwan and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2018) An update on nano additive in diesel fuel. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-51.. (Unpublished) (Unpublished)

N. W., Awang and D., Ramasamy and M. M., Rahman and M. M., Noor and K., Kadirgama (2018) Wear testing analysis on cylinder head valve for CNG fueled engine. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. p. 1.. (Unpublished) (Unpublished)

N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and Nurul Aina, Husaini and M. M., Rahman and I., Zaman (2017) Dynamics Properties of a Go-Kart Chassis Structure and Its Prediction Improvement Using Model Updating Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3887-3897. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque and M. M., Noor (2017) Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2017) Correlation of Numerical and Experimental Analysis for Dynamic Behaviour of a body-in-white (BIW) Structure. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01020). ISSN 2261-236X (Published)

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and Murillo, J. Rivas and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2017) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamic simulations. Advanced Science Letters, 23 (11). pp. 11549-11552. ISSN 1936-6612. (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2017) Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3087-3094. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman (2016) Experimental Investigation of Flank Wear in end Milling of Aluminum Alloy with Water-Based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Najiha, M. S. and M. M., Rahman (2015) Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2771-2785. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2015) A Review on Model Updating In Structural Dynamics. IOP Conference Series: Materials Science and Engineering, 100 (1). 012015. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Najiha, M. S. and M. M., Rahman (2014) A computational fluid dynamics analysis of single and three nozzles minimum quantity lubricant flow for milling. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1891-1900. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, M. A. and M. M., Rahman and Roy, B. K. and Chakraborty, S. and Islam, M. D. and Aktaruzzaman, M. and Mohammad, N. (2014) Sliding Friction of Steel Combinations. The Open Mechanical Engineering Journal, 8. pp. 364-369. ISSN 1874-155X. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nurul Hidayah, Razak and M. M., Rahman and K., Kadirgama (2012) Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012022). ISSN 1757-899X (Published)

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2008) An Investigation into the Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur. pp. 22-26.. (Published)

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and M., Hafizuddin (2008) Regenerative Chatter in End Milling on Mould Aluminum Alloys. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. . (Published)

R

Rahman, Md. Arafatur and A. Taufiq, Asyhari and Ibnu Febry, Kurniawan and Ali, Md Jahan and M. M., Rahman and Karim, Mahima (2020) A scalable hybrid MAC strategy for traffic-differentiated IoT-enabled intra-vehicular networks. Computer Communications, 157. pp. 320-328. ISSN 0140-3664. (Published)

Raiyan, M. F. and Ahamed, J. U. and M. M., Rahman and Salam, M. A. (2017) Performance and Exergetic Investigation of a Domestic Split Air Conditioner using Blends of R22 and R290. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4125-4139. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S

Singh, Rupinder and Singh, Gurchetan and Singh, Jaskaran and Kumar, Ranvijay and M. M., Rahman and Ramakrishna, Seeram (2019) Thermomechanical investigations of PEKK-HAp-CS composites. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (11). pp. 1196-1203. ISSN 0954-4119. (Published)

Singh, J. and Singh, R. and Kumar, R. and M. M., Rahman and Ramakrishna, S. (2019) PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding. Journal of Thermoplastic Composite Materials, 34 (6). pp. 745-764. ISSN 1530-7980 (print); 0892-7057 (online). (Published)

Sahid, N. S. M. and M. M., Rahman and K., Kadirgama and D., Ramasamy and Maleque, M. A. and M. M., Noor (2017) Experimental Investigation on the Performance of the TiO2 and ZnO Hybrid Nanocoolant in Ethylene Glycol Mixture towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and Amirruddin, Abdul Kadir and G., Najafi and M. M., Rahman (2017) Waste Cooking Oil Blended With The Engine Oil For Reduction of Friction and Wear On Piston Skirt. Fuel, 205. pp. 247-261. ISSN 0016-2361. (Published)

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915. (Published)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished) (Unpublished)

T

Thamir K., Ibrahim and M. M., Rahman and Obed M., Ali and F., Basrawi and R., Mamat (2016) Optimum Performance Enhancing Strategies of the Gas Turbine Based on The Effective Temperatures. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (01002). ISSN 2261-236X (Published)

Thamir K., Ibrahim and M. M., Rahman and M. K., Mohamed and F., Basrawi (2016) Statistical Analysis and Optimum Performanceof the Gas Turbine Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow. Procedia Engineering, 105. pp. 46-55. ISSN 1877-7058. (Published)

Thamir K., Ibrahim and M. M., Rahman (2015) Optimum Performance Improvements of the Combined Cycle Based on an Intercooler–Reheated Gas Turbine. Journal of Energy Resources Technology, 137. pp. 1-11. ISSN 0195-0738 (print); 1528-8994 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2015) An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger. Renewable and Sustainable Energy Reviews, 43. pp. 363-380. ISSN 1364-0321. (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman (2014) Heat Transfer and Pressure Drop Prediction In An In-Line Flat Tube Bundle by Radial Basis Function Network. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2003-2015. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An experimental study of air flow and heat transfer over in-line flat tube bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2014) An Experimental Study of Air Flow and Heat Transfer Over In-Line Flat Tube Bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen , T.A. and M., Ishak and M. M., Rahman (2014) Performance predictions of laminar heat transfer and pressure drop in an in-line flat tube bundle using an adaptive neuro-fuzzy inference system (ANFIS) model. International Communications in Heat and Mass Transfer, 50. pp. 85-97. ISSN 0735-1933. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An Experimental Study of Heat Transfer and Friction Factor Characteristics of Finned Flat Tube Banks with In-Line Tubes Configurations. Applied Mechanics and Materials, 564. pp. 197-203. ISSN 1662-7482. (Published)

Thamir K., Ibrahim and M. M., Rahman (2013) Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 383-396. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) Estimation of Heat Transfer and Pressure Drop in an In-Line Flat Tubes Bundle by Radial Basis Function Network (RBFN). In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-8.. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454. (Published)

Thamir K., Ibrahim and M. M., Rahman (2013) Study on effective parameter of the triple-pressure reheat combined cycle performance. Thermal Science, 17 (2). pp. 497-508. ISSN 2334-7163. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Thermal Impact of Operating Conditions on the Performance of a Combined Cycle Gas Turbine. Journal of Applied Research and Technology, 10 (4). pp. 567-577. ISSN 1665-6423. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Effect of Comparison Ration on Performance of Combined Cycle Gas Turbine. International Journal of Energy Engineering, 2 (1). pp. 9-14. ISSN 2163-1891 (Print); 2163-1905 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2011) A Numerical Study of Forced Convection Heat Transfer for Staggered Tube Banks in Cross-Flow. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 216-227.. (Published)

Thamir K., Ibrahim and M. M., Rahman and Abdalla, Ahmed N. (2010) Study on The Effective Parameter of Gas Turbine Model with Intercooled Compression Process. Scientific Research and Essay , 5 (23). pp. 3760-3770. ISSN 1992-2248. (Published)

U

Urmi, W. T. and M. M., Rahman and Safiei, W. and Kadirgama, K. and Maleque, M. A. (2022) Effects of minimum quantity lubrication technique in different machining. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). 135 -159. ISSN 2289-7879. (Published)

Urmi, Wajiha Tasnim and M. M., Rahman and Azmi, W. H. and K., Kadirgama and D., Ramasamy and Maleque, M. A. (2020) Experimental Investigation on the Stability of 40% Ethylene Glycol Based TiO2-Al2O3 Hybrid Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879. (Published)

W

W., Safiei and M. M., Rahman and A. R., Yusoff and M. Y., Ali (2023) Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids. In: 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference , 27-28 Oktober 2022 , Surakarta, Indonesia. pp. 21-32.. ISSN 2195-4356 (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. N., Arifin and W., Tasnim (2021) Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. Arabian Journal for Science and Engineering, 46 (8). pp. 7699-7718. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and Wajiha Tasnim, Urmi and Zetty Akhtar, Abd Malek (2021) Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 111-125. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and M. A., Hadi and W. H., Azmi and M. N., Arifin (2021) Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 47-62. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and Musfirah, Abdul Hadi and Maleque, M. A. and Singh, R. (2021) Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012094). ISSN 1757-899X (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. R., Radin (2020) Preparation, stability and wettability of nanofluid: a review. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). 7244 -7257. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wahaizad, Safiei and M. M., Rahman and Kulkarni, R. R. and Md Noor, Ariffin and Zetty Akhtar, Abd Malek (2020) Thermal Conductivity and Dynamic Viscosity of Nanofluids: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (2). pp. 66-84. ISSN 2289-7879. (Published)

Wajiha Tasnim, Urmi and M. M., Rahman and W. A., W. Hamzah (2020) An experimental investigation on the thermophysical properties of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. International Communications in Heat and Mass Transfer, 116 (104663). ISSN 0735-1933. (Published)

Wahaizad, Safiei and M. M., Rahman and Siti Aishah, Rusdan (2018) Experimental investigation of MQL Optimum Parameters In End Milling of AA6061-T6 using Taguchi Method. International Journal of Engineering & Technology, 7 (4.35). pp. 186-189. ISSN 2227-524X. (Published)

Y

Yet, Ong Zu and Rassem, Taha H. and Rahman, Md. Arafatur and M. M., Rahman (2021) Improved attentive pairwise interaction (API-Net) for fine-grained image classification. In: IEEE Emerging Technology in Computing, Communication and Electronics (ETCCE 2021) , 21-23 December 2021 , Dhaka, Bangladesh. pp. 1-6. (21605301). ISBN 978-166548364-3 (Published)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and K. V., Sharma (2016) Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant. The International Journal of Advanced Manufacturing Technology, 82 (1). pp. 327-340. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z

Zetty Akhtar, A. M. and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. Energy Security and Chemical Engineering Congress, 736. pp. 1-12. ISSN 1757-899X. (Published)

Zetty Akhtar, A. M. and M. M., Rahman and Kadirgama, K. and Rahman, S. and Maleque, M. A. (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped10wt% graphene) - Ethylene Glycol Based Nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879. (Published)

Zetty Akhtar, Abd Malek and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) An experimental investigation on thermal conductivity and viscosity of graphene doped CNTs /TiO2 nanofluid. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 8224-8233. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zainal Ariffin, Selamat and A. R., Yusoff and Mohd Ali, M. and Efendee, A. M. and M. M., Rahman (2018) Optimization of Coolant Technique Conditions for Machining A319 Aluminium Alloy Using Response Surface Method (RSM). In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012039). ISSN 1757-899X (Published)

Zainal Ariffin, Selamat and Alias, M. and A. R., Yusoff and M. M., Rahman (2017) Experimental of surface roughness and tool wear on coolant condition technique using Aluminium alloy 319 used in automotive industries. International Journal of Engineering Research & Science (IJOER), 3 (10). pp. 51-60. ISSN 2395-6992. (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and Nornajmiah, Mohamad and A. R., Yusoff and M. M., Rahman (2016) Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter. Indian Journal of Science and Technology, 9 (9). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and A. R., Yusoff and M. M., Rahman (2016) Effect of Coolant Nozzle Sizes on Turning Aluminum Alloy AL319. Indian Journal of Science and Technology, 9 (9). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and A. R., Yusoff and M. M., Rahman (2014) The Effect of Various Diameters Orifice Nozzle Coolant on Surface Roughness Performance in CNC Turning. Advanced Materials Research, 903. pp. 169-173. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zainal Ariffin, Selamat and Razali, M. and A. R., Yusoff and M. M., Rahman (2014) Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented. Australian Journal of Basic and Applied Sciences, 8 (4 (Special)). pp. 695-699. ISSN 1991-8178. (Published)