Items where Division is "Centre of Excellence: Automotive Engineering Centre
Centre of Excellence: Automotive Engineering Centre" and Year is 2016

A

A., Jamar and Z. A. A., Majid and Azmi, W. H. and M., Norhafana and A. A., Razak (2016) A Review of Water Heating System for Solar Energy Applications. International Communications in Heat and Mass Transfer, 76. pp. 178-187. ISSN 0735-1933. (Published)

A. A., Razak and Z. A. A., Majid and Azmi, W. H. and M. H., Ruslan and Choobchian, Sh. and G., Najafi and K., Sopian (2016) Review on Matrix Thermal Absorber Designs for Solar Air Collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanorefrigerants for Various Types of Refrigerant based: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 76. pp. 285-293. ISSN 0735-1933. (Published)

A. R., Zulhishamuddin and S. N., Aqida and E. A., Rahim (2016) Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties. In: AIP Conference Proceedings: 19th International Esaform Conference On Material Forming (ESAFORM 2016) , 27–29 April 2016 , Nantes, France. pp. 1-6., 1769 (030004). ISBN 978-0-7354-1236-1 (Published)

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Mohd Herzwan, Hamzah and Mohd Fahmi, Othman (2016) Analysis of Combustion Characteristics and Emissions of Diesel Engine Fueled With Waste Source Fuel. In: 4th European Conference on Renewable Energy Systems (ECRES 2016) , 28-31 August 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished) (Unpublished)

Azmi, W. H. and Khamisah, Abdul Hamid and N. A., Usri and R., Mamat and K. V., Sharma (2016) Heat Transfer Augmentation of Ethylene Glycol: Water Nanofluids and Applications – A review. International Communications in Heat and Mass Transfer, 75. pp. 13-23. ISSN 0735-1933. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and R., Mamat and K. V., Sharma and Mohd Sham, Mohamad (2016) Effects of Working Temperature on Thermo-Physical Properties and Forced Convection Heat Transfer of TiO2 Nanofluids in Water–Ethylene Glycol Mixture. Applied Thermal Engineering, 106. pp. 1190-1199. ISSN 1359-4311. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and Usri, N. A. and R., Mamat and Mohd Sham, Mohamad (2016) Heat Transfer and Friction Factor of Water and Ethylene Glycol Mixture Based TiO2 and Al2O3 Nanofluids Under Turbulent Flow. International Communications in Heat and Mass Transfer, 76. pp. 24-32. ISSN 0735-1933. (Published)

D

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Damirchi, Hojjatollah and G., Najafi and Alizadehnia, Siamak and R., Mamat and Che Sidik, Nor Azwadi and Azmi, W. H. and M. M., Noor (2016) Micro Combined Heat and Power to Provide Heat and Electrical Power using Biomass and Gamma-type Stirling Engine. Applied Thermal Engineering, 103. pp. 1460-1469. ISSN 1359-4311. (Published)

H

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X (Published)

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished) (Unpublished)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished) (Unpublished)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Awad, Omar I. (2016) Experimental Investigation of the Impact of Using Alcohol-Biodiesel-Diesel Blending Fuel on Combustion of Single Cylinder CI Engine. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 160 (012038). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Hagos, F. Y. and Abd Rashid, A. Aziz and Shaharin, A. Sulaiman (2016) Effect of Injection Timing on Combustion, Performance and Emissions of Lean-burn Syngas (H2/CO) in Spark-Ignition Direct-Injection Engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 1468-0874 (print); 2041-3149 (online). (Published)

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

I

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished) (Unpublished)

I. M., Yusri and R., Mamat and Azmi, W. H. and G., Najafi and N. A. C., Sidik and Awad, Omar I. (2016) Experimental Investigation of Combustion, Emissions and Thermal Balance of Secondary butyl alcohol-gasoline Blends in a Spark Ignition Engine. Energy Conversion and Management, 123. pp. 1-14. ISSN 0196-8904. (Published)

I. M., Yusri and R., Mamat and Obed M., Ali and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and H. M., Mahmudul (2016) The Combustion Of N-Butanol-Diesel Fuel Blends And Its Cycle To Cycle Variability In A Modern Common-Rail Diesel Engine. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2297-2301. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim Khalil, Adam and A. Rashid, A. Aziz and Suzana, Yusup and Morgan, Heikel and Hagos, F. Y. (2016) Optimization of Performance and Emissions of a Diesel Engine Fuelled with Rubber Seed-Palm Biodiesel Blends using Response Surface Method. Asian Journal of Applied Sciences, 4 (2). pp. 401-421. ISSN 2321–0893. (Published)

Irnie, Zakaria and Azmi, W. H. and A. M. I., Mamat and R., Mamat and R. , Saidur and S. F., Abu Talib and W. A. N., W. Mohamed (2016) Thermal Analysis of Al2O3–water Ethylene Glycol Mixture Nanofluid for Single PEM Fuel Cell Cooling Plate: An Experimental Study. International Journal of Hydrogen Energy, 41 (9). pp. 5096-5112. ISSN 0360-3199. (Published)

K

K. A., Hamid and Azmi, W. H. and R., Mamat and K. V., Sharma (2016) Experimental Investigation on Heat Transfer Performance of TiO2 Nanofluids in Water-Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 73. pp. 16-24. ISSN 0735-1933. (Published)

M

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. E., Babiker and A. R. A., Aziz and M., Heikal and S., Yusup and Hagos, F. Y. (2016) Experimental and Simulation Study on Steam Gasification of Phoenix-Dactylifera Date Palm Seeds. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3201-3214. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and K. V., Sharma and G., Najafi (2016) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of BioGlycol - Water Mixture Based Al2O3 Nanofluid. Applied Thermal Engineering, 102 (June). pp. 932-941. ISSN 1359-4311. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and N. M. Zuki, N. M. and G., Najafi (2016) Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes. International Communications in Heat and Mass Transfer, 75. pp. 295-302. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Amir, Aziz and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) An Experimental Determination of Thermal Conductivity and Viscosity of BioGlycol/water based TiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 22-32. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Mohd Fadzil, Abdul Rahim and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) Experimental Investigation and Development of New Correlation for Thermal Conductivity and Viscosity of BioGlycol/water based SiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 54-63. ISSN 0735-1933. (Published)

M. S., Reza and S. N., Aqida and I., Ismail (2016) Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface. Applied Physics A, 122 (611). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

M. S. M., Sani and H., Ouyang (2016) Identification of Nonlinearities in Joints of a Wing Structure. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03006). ISSN 2261-236X (Published)

M. S. M., Sani and N. A., Nazri and S. N., Zahari and N. A. Z., Abdullah and G., Priyandoko (2016) Dynamic Study of Bicycle Frame Structure. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-8., 160 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/PAG Nanolubricant for Application in Automotive Air Conditioning System. International Journal of Refrigeration, 70. pp. 93-102. ISSN 0140-7007. (Published)

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohd Razali, Hanipah and Zamri, Mohamed (2016) Numerical Investigations on the Port Flow Field of a Two-Stroke Poppet Valve Engine. In: 2nd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2016) , 2-3 August 2016 , MAI, Cyberjaya, Malaysia. pp. 1-11.. (Unpublished) (Unpublished)

Muhammad Ikram, Mohd Rashid and Hamdan, Daniyal and Danial, Mohamed (2016) Comparison Performance of Split Plug-in Hybrid Electric Vehicle and Hybrid Electric Vehicle using ADVISOR. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished) (Unpublished)

N

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished) (Unpublished)

N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan and Ismed, Iskandar (2016) Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

S

S. K., Lim and Azmi, W. H. and A. R., Yusoff (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/Water-Ethylene Gylcol Mixture Nanocoolant for Cooling Channel of Hot-press Forming Die Application. International Communications in Heat and Mass Transfer, 78. pp. 182-189. ISSN 0735-1933. (Published)

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915. (Published)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished) (Unpublished)

Syafiq, Zulkifli and O., Fahmi and Awad, Omar I. and Abdul Adam, Abdullah (2016) The Study of Stability and Combustion Characteristics O Water In Diesel Emulsion Fuel. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished) (Unpublished)

Z

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Zamzuri, Hamedon and Razemi, M. N. I. and Azmir, Azhari and A. R., Yusoff (2016) In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System. In: 5th International Conference On Design And Concurrent Engineering (IDECON 2016) , 18-21 September 2016 , Langkawi, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)