![UMPSA-IR Logo-UMPSA](/images/IR.jpg)
Items where Division is "Faculty of Electrical & Electronic Engineering" and Year is 2008
![]() | Up a level |
Abd Azrin Firdaus, A Rahim (2008) Line followers robot using PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abd Razak, Muhammad Ab. Basith (2008) Wireless mobile ultrasonic detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abdul Hakim, Kassim (2008) Ultrasonic motion detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abdul Latif Aizat, Mohamad Haniff (2008) Speed control of DC motor using pole placement controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abdullah, Ariffin (2008) Portable solar street lamp. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abdullah, Muhd Asran (2008) Water level in tank using level sensor and PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Abros Noori, Anvardeen (2008) Room monitoring system using radio frequency (RF) technology and passive infrared sensor (PIR). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Addie Irawan, Hashim and M. F., Abas and A., Hazha and N. H., Nordin (2008) Microstepping Drives Approaches to Improve Machine Carriage/ Conveyor Movement. In: Proceedings of the 4th International Colloquium on Signal Processing and its Applications (CSPA 2008) , 7- 9 March 2008 , Kuala Lumpur. pp. 587-590.. (Published)
Adezeno, Sagoli Olid (2008) DC motor control using LQR algorithm. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Ahmad, Saifullah (2008) Dual mode mobile robot : application using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Ahmad Firdaus, Makhtar (2008) Alarm triggered multiple display thermometer using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Ahmad Juzaili, Alias (2008) An 16-bit fixed-point square root operation using VHDL. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Ahmad Khairul Azwan, Jantan Anua Jah (2008) Development of auto re-closer earth leakage circuit breaker (AR-ELCB). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Ahmad Syakir, Mohamad (2008) Energy audit for the UMP library and energy efficiency project proposal. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Aizuddin, Abdul Rahim (2008) Dynamic modelling and control of mass spring system with large load uncertainty. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Aminurrasyid, Abas (2008) USB mug warmer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.
Amirah Aainaa, Abdul Jalil (2008) Child monitoring system (CHILD). Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Ardian Syah, Mohd Yusof (2008) Command by speech recognition. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Ariff, Che Mohd Noor (2008) PID control system implementation in embedded system for DC motor speed control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Ashvaany, Egambaram (2008) RFID wireless door system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Azril Nizam, Muhamad (2008) Minutiae point exraction for skeleton-based fingerprint image. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Che Ku Mohd Faizul, Che Ku Mohd Salleh (2008) Linear quadratic regulator (LQR) speed control for DC motor using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Darlene, Mohamad Douglas (2008) Home automation system using power line communication. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang.
Effizul Syafrin, Abu Bakar (2008) Labview PID speed controller for DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Emi Rahayu, Mat Noor (2008) Flood detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Faiz, Mohd Zabri (2008) Computer based instrumentation system for temperature measurement using RTD in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Haminuddin, Nurul Izzatul Ain (2008) Microcontroller based battery charger. Faculty of Electrical & Electronic Engineering, Univeirsiti Malaysia Pahang.
Hani Syairah, Azman (2008) Resource planning electronic board for agriculture industry application model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Hazer, Mohamad Sayuti (2008) Temperature controlled NiCd battery charger. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .
Ibrahim, Iderus (2008) Artifial intelligence (AI) controller design for beam and ball system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Jina, anak Muli (2008) Computer-based instrumentation system for temperature measurement using thermocouple in MATLAB application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Khairi, Khalib (2008) Microcontroller based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Khairul Anwar, Mat Salim (2008) Implementation of integral control state feedback controller for coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Khairul Anwar, Mohd Yakop (2008) Automatic pet feeder with client / server application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
M. Z., Ibrahim and Marzuki, Khalid and Rubiyah, Yusof (2008) Automatic Speaker Recognition System Using Fuzzy C-Means Artificial Neural Networks. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 93-108. ISSN 1985-5176. (Published)
Mahmad Tabib, Mahmad Tajudin (2008) Smart system of ultrasonic car parking. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohamad Ridhwan, Mohamed Rodzi (2008) Home automation using X-10 technology. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohamed Faizan, Basheer Ahmad (2008) Obstacle avoidance legged robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohamed Farid, Mohamed Faruq (2008) PID controller design for DC motor using matlab application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohammad Faizal, Mohamad Ehsan (2008) Parking motoring system with security system features. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohammad Hadi, Ismail (2008) Rain-water PLC based detector and valve switcher. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Adid, Abu Musa (2008) Development of smart egg incubator system for various types of egg (seis). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Afiq, Mat Noor (2008) Implementation of PID controller on prasmatic control of universal stretch and bending machine (USBM) simplified model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Aizat Faiz, Mohd Yazid (2008) Computer-based instrumentation for pressure instrument using visual basic application. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Mohd Aizuddin, Abu Bakar (2008) Development of a PID controller for DC motor using Microsoft Visual Basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Anwar, Zawawi (2008) Active suspension system design for railway vehicles transporting sensitive goods and hazardous materials. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohd Ashraf, Ahmad (2008) Dynamic Modelling of a Two-link Flexible Manipulator System Incorporating Payload. In: 3rd IEEE Conference on Industrial Electronics and Applications, 2008. ICIEA 2008 , 3-5 June 2008 , Singapore. 96 -101 .. (Published)
Mohd Azhar, Azmi (2008) PI controller for battery charger system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Azizul, Ghafur Rahimi (2008) Temperature monitoring system. Fakulti Kejuruteraan Elektrik Dan Elektronik , Universiti Malaysia Pahang.
Mohd Azzuan, Abd Aziz (2008) Power system analysis educational toolbox using Matlab 7.1. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Firdaus, Mahyidin (2008) Student attendance using RFID system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Firdhaus, Samah (2008) Digital rain gauge. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Fitri, Mohd Sariff (2008) Solar powered warning street lamp. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Hafiz, Hasbullah (2008) Computer based instrumentation for level measurement using visual basic application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Hanis, Jaludin (2008) Expert domestic wiring simulation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Hapiz, Arbain (2008) Battery charger with alphanumeric LCD module monitoring. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Helmi, Samta (2008) Control rectifier for variable speed single phase DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Isa, Nur Iznie Afrah (2008) DC Motor Controller Using Linear Quadratic Regulator (LQR) Algorithm Implementation on PIC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Izzat, Dzolkafle (2008) Implementation of PID controller for controlling the liquid level of the coupled tank system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Noor, Zamri (2008) Wall avoiding robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Nor Idrus, Mat Shariff (2008) Automatic air conditioning control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Razuan, Mohamed Said (2008) Development of a universal serial bus hub with protection circuits. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Mohd Redha, Rajab (2008) Linear quadratic regulator (LQR) controller design for DC motor speed using matlab application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Rubaee, Munajah (2008) Microcontroller Based Boost PID. Faculty of Electrical& Electronic Engineering, Universiti Malaysia Pahang.
Mohd Shafarin, Haruddin (2008) Small scale wind turbine (synchronous generators). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Shahizan, Shapii (2008) Implementation of LQR controller on coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Shakirun Naim, Md Isa (2008) PC based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Syafiq, Mohd Fuad (2008) Development of the computer-aided diagram (CAD) for electrical machine for undergraduate purpose learning. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Taufik, Ab Rahman (2008) Buck-boost power LED driver using PIC microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohd Zulkifli Azizan, Sinnappan (2008) UMP version LED bulb. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Mohs Azri, Abd Mutalib (2008) Speed control of DC motor using PI controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .
Muhamad Akmal, Ishak (2008) Computer-based instrumentation system for temperature measurement using thermocouple in visual basic application (C.I.S.T.V.A.). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Muhamad Azizan, Mat Sirat (2008) Microcontroller base full bridge forward power supply unit. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .
Muhammad, Mazlan (2008) Path follower mobile robot using PID controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Muhammad Ezra-Ezwan, Mat Aris (2008) Speed control of DC motor using PID controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Muhammad Hasbullah, Rais (2008) Computer-based instrumentation system for temperature measurement using RTD in visual basic application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Muhammad Syafiq, Norashid (2008) 16 bits x 16 bits booth multiplier using VHDL. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nabillah, Saleh (2008) Child monitoring system (Parent). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Nadiathul Raihana, Ismail (2008) PV module maximum power point tracker (MPPT) using microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nasrung, Nurba (2008) Bus monioring system (hardware part). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Nazariha, Mat Salleh (2008) GUI development for DC motor application in MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nik Mohamad Anis, Nik Haron (2008) Design of a microcontroller-based passive standby uninterruptible power suply (UPS). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nik Mohd. Farhan, Abd Wahab (2008) Implementation of integral control state feedback controller on prasmatic control of universal strech and bending machine (USBM) simplified model. Faculty of Electric & Electronics , Universiti Malaysia Pahang.
Noor Din, Ummi Kalsom (2008) Alarm System Using Body Detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nor Robaini, Ibrahim (2008) Encryption using FPGA. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Norahida, Ibrahim (2008) Computer methods in electrical power distribution for petronas gas industrial plant. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Norasyikin, Julis (2008) Implementation of PID controller on revolute control of universal strech and bending machine (USBM) simplified model. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Norazianti, Kaharudin (2008) LCD graphic monitoring for energy saving control application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Norazlina, Ab. Rahman (2008) Neural network controller for DC motor using MATLAB application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Norhayanie, Roslan (2008) Energy saving control system application in lecture hall. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nur Azliza, Ali (2008) Fuzzy logic controller for controlling DC motor speed using MATLAB applications. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nur Khuzairy, Jamaludin (2008) Solat tracking system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nur Munirah, Mohd Din (2008) Graphical user interface (GUI) development for energy saving control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nuripaizail, Ahmad (2008) Microcontroller based variable gate voltage for MOSFET. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nurlaila, Haman (2008) Currency recognition and converter system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Nurliyana, Mohd Johari (2008) Computer based instrumentation system for pressure measurement in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Nurmaliza, Md Ali (2008) Multiuse expert electrical calculator system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nurul Hakeem, Abd Rahim (2008) Development of image processing software using visual basic 6.0. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nurul Izyan, Ahmad Tarmizi (2008) Remote process control and monitoring by using TCP/IP. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nurul Izzati, Pandak Jabo (2008) Speed control of DC motor using PID controller implementation with visual basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Nusaibah, Mohd Nor (2008) Spycam surveillance system with motion detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Peterus, Sharon (2008) PID digital controller for DC motor speed using MC68HC11 microcontroller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Prema Latha, Subramaniam (2008) Moving detection using cellular neural network (CNN). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Rabi'atul Adawiyah, Mustafa (2008) Automatic car license plate recognition system (CLPR). Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Radin Mohd Akhimullah, Mohd Idrus (2008) Battery charger with alarm application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Rameesh, Gunasekaran (2008) Bluetooth message LCD display. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Riza, Mior Ahmad Faiz (2008) Synchronous Motor Design and Analysing the Output Characteristics. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Rosmira, Roslan (2008) Chess digital clock. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.
Saiful Anuar, Alwi (2008) Automatic main failure (AMF) system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Samsudin, Mohd Sauqi (2008) Analysis of real power allocation for deregulated power system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Shakina, Abu Hasan (2008) Microcontroller based three-level zero voltage switching pulse-width-modulation DC-to-DC converter. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .
Shamsul Nizam, Mohd Yusof@ Hamid (2008) Developing LQR to control speed motor using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Siti Fairuz, Hamid (2008) Single phase motor speed control using SPWM inverter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Siti Jamilah, Mahful (2008) Microcontroller based buck PID. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Suzaley, Sulaiman (2008) Remote control of a moving vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Syed Mohd Hafiz, Syed Omar (2008) Energy saving lamp. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Syed Mohd Syukrizal, Ahmad Kori (2008) Multiple RFID doors control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Thamayanthi, Thangavelu (2008) Electronic token system using RF technology. Faculty of Electrical & Eectronic, Universiti Malaysia Pahang.
Umar Baki, Muhammad Farhan (2008) Modelling and control of DC to DC converter (BUCK). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Wan Mohd Afiq Nazman, Wan Anuar (2008) Study of voltage sag in power system with six-phase transmission line. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Wan Mohd Amir Haris, Wan Sallehuddin (2008) Smart vehicle data logger using global positioning system and global system for mobile communication. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.
Wan Robaah, W Ahmad (2008) A DC motor controller using PID algorithm implementation on PIC. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.
Zulkifli, Dollah (2008) Static and dynamic impact of unified power flow controller (UPFC) in electric transmission system. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .