Items where Division is "Faculty of Chemical & Natural Resources Engineering" and Year is 2011

Article

Abdulbari, Hayder A. and Letchmanan, Kumaran and R. M., Yunus (2011) Drag reduction characteristics using aloe vera natural mucilage: An experimental study. Journal of Applied Sciences, 11 (6). pp. 1039-1043. ISSN 1812-5654. (Published)

Abdulbari, Hayder A. and Nour, A. H. and R. M., Yunus and Azhari, H. Nour (2011) Demulsification of Triton X-100, Low-Sulfur Wax Residue (LSWR), Sorbitan monooleate (Span 83) and Sodium Dodecyl Sulfate (SDS)-Stabilized petroleum emulsions with a microwave separation method. Research Journal of Chemistry and Environment, 15 (3). pp. 36-40. ISSN 0972-0626 (Print), 2278-4527 (online). (Published)

Abdulbari, Hayder A. and Nour, A. H. and R. M., Yunus and Wafaa, Kamil Mahmood and Azhari, H. Nour (2011) Demulsification of petroleum emulsions using microwave separation method. International Journal of Physical Sciences, 6 (23). pp. 5376-5382. ISSN 1992-1950. (Published)

Abdulbari, Hayder A. and R. M., Yunus and M. K., Nizam (2011) Lubricating grease from spent bleaching earth and waste cooking oil: Tribology properties. International Journal of Physical Sciences, 6 (20). pp. 4695-4699. ISSN 1992-1950. (Published)

Abdulbari, Hayder A. and Siti Nuraffini, Kamarulizam and Rohaida, Che Man (2011) Investigating drag reduction characteristic using okra mucilage as new drag reduction agent. Journal of Applied Sciences, 11 (14). pp. 2554-2561. ISSN 1812-5654. (Published)

Ahmad Ziad, Sulaiman and Azilah, Ajit and R. M., Yunus and Chisti, Yusuf (2011) Ultrasound-assisted fermentation enhances bioethanol productivity. Biochemical Engineering Journal. pp. 141-150. (Published)

Ahmed, Iqbal and Nasrul Fikry, Che Pa and Mohd Ghazali, Mohd Nawawi and Wan Aizan Wan, Abd Rahman (2011) Modified polydimethylsiloxane/polystyrene blended IPN pervaporation membrane for ethanol/water separation. Journal of Applied Polymer Science, 122 (4). pp. 2666-2679. ISSN 1097-4628. (Published)

Alam, A. K. M. M. and Shubhra, Quazi T.H. and Al-Imran, Gazi and Barai, Sanjoy and Islam, Mir Sujaul and Rahman, M. Mahbubur (2011) Preparation and characterization of natural silk fiber-reinforced polypropylene and synthetic E-glass fiber-reinforced polypropylene composites: a comparative study. Journal of Composite Materials, 45 (22). pp. 2301-2308. ISSN 0021-9983 (print); 1530-793X (online). (Published)

C. K. M., Faizal and Kobayashi, T. (2011) Molecularly imprinted membrane applied for selective separation. Journal of Applied Sciences, 11 (13). pp. 2411-2415. ISSN 1812-5654. (Published)

Cheng, Hock Tian (2011) Engineering Properties of Epoxy Polymer Cement Concrete Reinforced with Glass Fibers. Journal of Engineering and Applied Sciences, 6 (3). pp. 191-199. ISSN 1816-949X. (Published)

Chin, S. Y. and Radzi, S. N. R. and Maharon, I. H. and Shafawi, M. A. (2011) Kinetic Model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor. World Academy of Science, Engineering and Technology, 76 (34). pp. 183-189. ISSN 2010-3778. (Published)

Haigh, Kathleen F. and Sumaiya, Zainal Abidin and Saha, Basudeb and T. Vladisavljević, Goran (2011) Pretreatment of used cooking oil for the preparation of biodiesel using heterogeneous catalysis. Progress in Colloid and Polymer Science, 139. pp. 19-22. ISSN 0340-255X. (Published)

Izan Izwan, Misnon and M. M., Yusoff and Saifful Kamaluddin, Muzakir and Hadi, Nur and Mohd Ikhwan, Mohd Rasid (2011) Amphiphilic solid basic catalyst for biodiesel production: Synthesis and characterization. Malaysian Journal of Microscopy, 7 (1). pp. 8-13. ISSN 1823-7010. (Published)

Mohd Faizan, Jamaluddin and Jailani, Salihon and N., Zainol (2011) Factorial Analysis on Acetic Acid Production Using Banana Stem Waste. International Journal of Chemical and Environmental Engineering. (Published)

Mohd Shahimie, Selamat and Jolius, Gimbun (2011) CFD Study of Gas-liquid Hydrodynamics in a Bubble Column. Jurnal UMP - Kejuruteraan & Sains Komputer, 4. pp. 77-88. ISSN 1985-5176. (Published)

Morshed, Mahbub and Ferdous, Kaniz and Khan, Maksudur R. and Mazumder, M. S. I. and Islam, M. A. and Uddin, Md. T. (2011) Rubber seed oil as a potential source for biodiesel production in Bangladesh. Fuel, 90 (10). pp. 2981-2986. ISSN 0016-2361. (Published)

N., Zainol (2011) Screening of Factors Affecting Biological Delignification Process of Oil Palm Trunk Using Local Oyster Mushroom (Pleurotus Ostretus). International Journal of Chemical and Environmental Engineering , 2 (4). ISSN 20780737. (Published)

N. S., Che Din and Noor Asma Fazli, Abdul Samad and Chin, S. Y. (2011) Fault detection and diagnosis for gas density monitoring using multivariate statistical process control. Journal of Applied Sciences, 11 (13). pp. 2400-2406. ISSN 1812-5654. (Published)

Prasad, Reddy and Muhammad Syaddad, Zainol and Iqbal, Ahmad and Krishnaiah, Duduku (2011) Kinetics study of microwave assisted extraction of hypoglycemic active compounds from Ceriops Decandra sp. leaves using ethanol: Comparison with the Soxhlet extraction. Journal of Applied Sciences, 11 (13). pp. 2364-2369. ISSN 1812-5654. (Published)

R. M., Yunus and Beg, M. D. H. and R., Ramli (2011) Effects of fiber loading, fiber type, its mesh sizes, and coupling agent on the properties of oil palm biomass/polypropylene composites. Journal of Composite Materials, 45 (21). pp. 2165-2171. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Rohana, Abu and Fadzilah Adibah, A. M. and Muhammad Roji, M. S. (2011) Oleate induces apoptosis in 3T3-L1 adipocytes. International Journal of Biotechnology and Bioengineering, 5 (9). pp. 504-507. ISSN 2475-3432. (Published)

Sri Murni, Astuti and Mimi Sakinah, A. M. and B. M., Retno Andayani and Risch, Awalludin (2011) Determination of saponin compound from Anredera cordifolia (Ten) Steenis plant (binahong) to potential treatment for several diseases. Journal of Agricultural Science, 3 (4). pp. 224-232. ISSN 1916-9760. (Published)

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Syed Mohd Saufi, Tuan Chik and J. Fee, Conan (2011) Simultaneous anion and cation exchange chromatography of whey proteins using a customizable mixed matrix membrane. Journal of Chromatography A, 1218 (50). pp. 9003-9009. ISSN 0021-9673. (Published)

W. Z., Wan Sulaiman and Kasmani, R. M. (2011) An overview of explosion severity on dust explosion. Jurnal Teknologi (Sciences and Engineering), 6 (SPECIAL ED). pp. 165-174. ISSN 2180-3722. (Published)

Zainatul Bahiyah, Handani and Sharifah Rafidah, Wan Alwi and Haslenda, Hashim and Zainuddin, Abdul Manan and Sharifah Hanis Yasmin, Sayid Abdullah (2011) Optimal design of water networks involving multiple contaminants for global water operations. Asia-Pacific Journal of Chemical Engineering, 6 (5). pp. 771-777. ISSN 1932-2135. (Published)

Book Chapter

Abdullah, Luqman Chuah and Jolius, Gimbun and Fakhru'l-Razi, A. and Sahari, Barkawi and Thomas, S. Y. Choong (2011) Prediction of CO and NOx Abatement in Catalytic Converter of a Compressed Natural Gas Vehicle (CNGV) Cold-Start Engine. In: Advances in Environmental Research. Nova Science Publishers , New York, United States, pp. 75-90. ISBN 978-1-61209-975-0

Conference or Workshop Item

Arumugam, Nithiya and Abdulbari, Hayder A. and Gupta, Arun (2011) Drag reduction efficiency of solid particles in pipelines of two phase flow. In: IEEE 3rd International Conference on Communication Software and Networks , 27-29 May 2011 , Xi'an, China. pp. 319-322.. ISBN 978-1-61284-486-2 (Published)

Azizan, Ramli and Mohd Shaiful Zaidi, Mat Desa (2011) The Importance of Ecological and Spiritual Approaches in Chemical Engineering towards Practical Conception of Sustainable Development. In: The Inaugural Asian Conference on Sustainability, Energy and the Environment 2011 , 2-5 Jun , Osaka, Japan. . (Published)

C. K. M., Faizal and Mohib Reza, Kazimi and Iqbal, Ahmed (2011) A Short Review of Hydrophilic Surface Modification Methods for Low Density Poly Ethylene. In: International Conference on Chemical Innovation (ICCI 2011) , 23-24 May 2011 , TATI University College. pp. 203-206.. (Published)

C. K. M., Faizal and Shareena, Mohd Sharif (2011) Application of Factorial Design Analysis to Control Bisphenol A MIP fabrication. In: Proceeding of International Conference Of Chemical Engineering And Industrial Biotechnology In Conjunction With 25th Symposium Of Malaysian Chemical Engineer (ICCEIB-Somche) 2011 , 28 November - 1 December 2011 , Kuantan, Pahang. pp. 1-6.. (Published)

Izirwan, Izhab and Siti Zubaidah, Sulaiman and Mohd Zulkifli, Mohamad Noor (2011) Effect Of H2 Enrichment On The Explosive Limits Of Liquefied Petroleum Gas (LPG) In Conventional Combustion. In: Energy and Sustainability 2011 , 11-13 April 2011 , Alicante, Spain. . (Unpublished) (Unpublished)

Jolius, Gimbun and Mohd Irwan Shah, Md Zain (2011) CFD Study On The Performance Of Oxygen Lance For Partial Combustion Unit At Direct Reduction Plant. In: Internation Conference on Chemical Innovation , 23-24 May 2011 , TATI UC. pp. 1-4.. (Unpublished) (Unpublished)

Khairatun Najwa, Mohd Amin and Nurul Sa'aadah, Sulaiman and Muhammad Shahir, Hasan and Ainun Jariah, Sansuri (2011) Synthesis And Swelling Behavior Of Agro-Waste Based Superabsorbent Composites. In: 5th International Congress of Chemistry and Environment (ICCE 2011) , 27-29 May 2011 , Port Dickson. pp. 1-5.. (Unpublished) (Unpublished)

Mimi Sakinah, A. M. and Noor Suhana, Adzahar (2011) Application of Fractional Factorial Design (FFD) for Screening of Significant Factor in Influencing Succinic acid Production from Biodiesel Based Glycerol Using Escherichia Coli. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO) 2011 , 19-21 April 2011 , Kuala Lumpur. pp. 1-5.. (Published)

Nor Khonisah, Daud and B. H., Hameed and Nurul Sa'aadah, Sulaiman (2011) Fenton-like oxidation of reactive black 5 solution using Fe-rice husk ash catalyst. In: UNSPECIFIED . . (Unpublished) (Unpublished)

Norhazilan, Md Noor and Lim, Kar Sing and Nordin, Yahaya and Arman, Abdullah (2011) Corrosion study on X70-carbon steel material influenced by soil engineering properties. In: International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) , 16-18 September 2011 , Guangzhou, China. pp. 875-880., 311-313. (Published)

Shakaib, M. and R. M., Yunus (2011) Effect of Permeation Velocity on Flow Behavior and Pressure Drop in Feed Channels of Membranes. In: ASEAN Conference on Scientific and Social Science Research (ACSSSR2011) , 01 Jul 2011 . . (Unpublished) (Unpublished)

Siti Nuraffini, Kamarulizam and Abdulbari, Hayder A. and Arumugam, Nithiya (2011) Studying the potential of slag waste particle as suspended solid drag reducing agent. In: IEEE 3rd International Conference on Communication Software and Networks , 27-29 May 2011 , Xi'an, China. pp. 323-327.. ISBN 978-1-61284-486-2 (Published)

Zainatul Bahiyah , Handani (2011) A Mixed Integer Linear Programming (MILP) Model for Optimal Design of Water Network. In: 4th International Conference on Modelling, Simulation and Applied Optimization , 19-21 April 2011 , Impiana KLCC Hotel & Spa Kuala Lumpur.. pp. 1-6.. (Published)

Thesis

Ambarwati, Dessy (2011) Characterization and process optimization of Melastoma malabathricum l. extract. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Munaim, Mimi Sakinah).

Asdarina, Yahya (2011) Kajian terhadap pelbagai teknik pengekstrakan minyak pati dari tanaman nilam (pogostemon cablin benth). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Ding, Gong Tao (2011) The optimisation and scale-up of microalgae cultivation for high level oil content for biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamad Khudhair, Mohammed (2011) Performance of cocoa husk mucilage as a drag reduction agent in pipes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hernawati, Lahading (2011) Development of chitosan based adsorbent for the removal of residual oil from palm oil mill effluent (POME). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juwari (2011) A new tuning method for two-degree-of-freedom internal model control under parametric uncertainty. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Badrulhisham, Abdul Aziz).

Mohd Najib, Razali (2011) Adsorption treatment of monoethanolamine (MEA) wastewater from oil and gas industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Noor Intan Shafinas, Muhammad (2011) Computational fluid dynamics of industrial scale spray dryer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Ilia Anisa, Aris (2011) Demulsification of water-in- oil (W/O) emulsion by microwave heating technology. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).

Norasiha, Hamid (2011) Inclusion complex formation between natural dye extracted from pitaya fruit skin and β-cyclodextrin : kinetic and thermodynamic study. Masters thesis, UNIVERSITI MALAYSIA PAHANG (Contributors, UNSPECIFIED: UNSPECIFIED).

Sri Murni, Astuti (2011) Optimization process of binahong extraction and characterization study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tania Suhail, Hadi (2011) Suspended solids as drag reduction agents for liquid flow in a pipeline. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hayder A., Abdul Bari).

Undergraduates Project Papers

Ahmad Khairul Azhar, Ahmad Kamal (2011) Sustainability approach in modeling and improvement of finger type slug catcher in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Erna Qurratu' Aini, Ruslan (2011) Study on extraction of pandan flavor from pandan leaves using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Leakath, Muhammad Zafran (2011) Characterization of pysio-chemical properties of novel one stop chemical method in preparations of copper nanofluids and possible explanations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Razif, Abdul Rahman (2011) Investigating the effect of solid powder particle size on the turbulent multi-phase flow in pipelines. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Ab Majid @ Aziz (2011) Glucose production from oil palm trunk. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Syahrul Ridhwan, Abdullah (2011) Optimization of glycerol recovery on effect of waste volume and ph using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Ridzuan, Kamaruzaman (2011) Isolation of microorganism from oil palm-sap. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Nallappan, Madana Leela (2011) Development of virgin polypropylene composite by sugarcane bagasse reinforcement. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Izzatiey, Mohammad Usolli (2011) The effect of adsorbent additive on clay based adsorbent to the removal of multidye system. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nora'asheera, Mohd Nazif (2011) Composites from polypropylene (PP) reinforced with oil palm empty fruit bunch (OPENFB) fibre. Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang.

Norshahida, Rahman (2011) Feasibility study of LNG pre � cooling system using carbon Dioxide as a refrigerant. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Asilah, Che Aziz (2011) Mechanical performance of kenaf fibre reinforced thermoplastic composite. Faculty of Chemical Engineering and Natural Resources, University Malaysia Pahang.

Nur Hayati, Zulkefli (2011) Preparation and characterization of cobalt based and zinc promoted catalyst fro fisher tropsch synthesis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Syazwani, Ghazali (2011) Extraction of Pandanus Amaryllifolius essential oil from pandan leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syuhada, Omar (2011) Removal of heavy metal in medical institutional wastewater using ultrasonic assisted various leaching solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Nadia Ummira, Abu Bakar (2011) Isolation of microorganism from oil palm sap. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Paveswari, Sithambaranathan (2011) Production of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Prakash, Gunah (2011) Optimization of xylose production from sugarcane bagasse using response surface methodology (RSM). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Sanggie, Florence Wednna (2011) Process modeling and comparison study of acid gas removal unit by using different aqueous amines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharifah Zureehan, Syed Othman (2011) An experimental study on LPG/H2O2 mixture for combustion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sita Fitriana, (2011) Efficient direct regeneration of true-to-type Pogostemon cablin benth from leaf explant and profile of essential oils. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Nor Fazruaini, Rusli (2011) Extraction and characterization of Malaysia pandan leaves by soxhlet method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Syed Ahmad Farhan , Syed Ab Mutalib (2011) Modeling of single mixed refrigerant process for offshore natural gas liquefaction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Thaomadaran, Ghunavathy (2011) Composite of the recycled polypropylene reinforced with oil palm empty fruit bunch. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.